| From: | Pekka Sippola |
| Date: | 29 Oct 2000 at 18:56:00 |
| Subject: | Re: Scandoublers & Flicker fixers |
Hello Kevin
>> You can also set the FliFi to the default 50/60 Hz, if the flashed
>> (via PMTNG) settings are bad.
> It seems much smoother now, the rest of the settings were oK.
Remember you can flash the FliFi to use refresh upto about 160 Hz
instead of 50 Hz PAL and 60 Hz NTSC depending on your monitor.
I have 100 Hz PAL and 120 Hz NTSC. And the difference is really big!
But PMTNG supports only one RTG card, so if you have more cards in, you
must first flash the FliFi via PMTNG and then change to P96Mode to add
additional settings for other cards. If you use CGX, you can first use
P96+PMTNG to set the FliFi and then change to CGX. At least the earlier
versions allowed to import the settings from a settings file made with
another tool.
Regards
proud owner of A500 powerhouse aŽla '91
now cooking with A4000T/233PPC
Quote carefully and read all ADMIN:README mails