This is my Amiga PPC port of TrueReality - a Nintendo 64 emulator. Contact me at amidog@amidog.com. URL: http://www.amidog.com/n64/ Usage: * Config TR using the TrueReality.cfg file: Line 1: AGA - 8bit using custom C2P. GFX - 8bit using WPA8. HAM8 - 32bit using custom 32bit->HAM8 (2-width). Line 2: 320 240 ID - where ID is the screenmode ID in HEX! Line 3: 640 480 ID - where ID is the screenmode ID in HEX! The IDs for PAL is 0x00021000 (320 240) and 0x00029004 (640 480). The supplied TrueReality.cfg file uses DoublePAL, I do however NOT recommend this since using PAL is much faster due to faster CHIP-mem writes! NOTE: The HAM8 mode requires and automatically selects PAL screenmodes! * Starting TR: 1. Open a CLI/Shell window and write TrueReality ROMNAME. 2. TR will now start, load the ROM, open a screen and start emulating. 3. TR probably changes the screenmode once or twice before any action will take place on screen, and please remember that NOT all ROMs work, check out http://www.snes9x.com/n64emulators/index.htm for a few screenshots of working ROMs. * These keys are used (incl. what they do): Left Mouse Button - Hold DOWN for a sec or two until TrueReality quits. ESC - Quits TrueReality (do NOT always work, use LMB as described above). F8 - Refresh Visual (to force refreshing, normally done automatically). Q - Start Button W - A-Button E - B-Button 8 (numeric keyboard) - C-Button UP 2 (numeric keyboard) - C-Button DOWN 4 (numeric keyboard) - C-Button LEFT 6 (numeric keyboard) - C-Button RIGHT UP (arrow) - D-Button UP DOWN (arrow) - D-Button DOWN LEFT (arrow) - D-Button LEFT RIGTH (arrow) - D-Button RIGHT A - R-Button S - L-Button D - Z-Button K - Stick Up J - Stick Down L - Stick Right H - Stick Left NOTE: The stick is a simulated analogue one and thus do NOT return to zero when you release one of the buttons, you must return in manually by pressing the opposite one! * Demo ROMs can be found at http://www.dextrose.com/ NOTE: Download PONG as the first one to get one that works! /Mathias "AmiDog" Roslund