This is TeX, Version 3.14159 (C version 6.1) (format=latex 98.3.5)  25 SEP 1998 09:17
**./images.tex
(images.tex
LaTeX2e <1996/12/01> patch level 1
Babel <v3.6h> and hyphenation patterns for american, german, loaded.

(/usr/lib/teTeX/texmf/tex/latex/base/report.cls
Document Class: report 1996/10/31 v1.3u Standard LaTeX document class
(/usr/lib/teTeX/texmf/tex/latex/base/size10.clo
File: size10.clo 1996/10/31 v1.3u Standard LaTeX file (size option)
)
\c@part=\count79
\c@chapter=\count80
\c@section=\count81
\c@subsection=\count82
\c@subsubsection=\count83
\c@paragraph=\count84
\c@subparagraph=\count85
\c@figure=\count86
\c@table=\count87
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
) (/usr/lib/teTeX/texmf/tex/latex/ntgclass/a4.sty
Package: a4 1995/09/25 v1.2e A4 based page layout
) (/usr/lib/teTeX/texmf/tex/latex/base/makeidx.sty
Package: makeidx 1995/04/19 v1.0j Standard LaTeX package
) (/usr/lib/teTeX/texmf/tex/latex/tools/multicol.sty
Package: multicol 1996/01/13 v1.5l multicolumn formatting (FMi)
\c@tracingmulticols=\count88
\mult@box=\box26
\multicol@leftmargin=\dimen103
\c@unbalance=\count89
\c@collectmore=\count90
\doublecol@number=\count91
\multicoltolerance=\count92
\multicolpretolerance=\count93
\full@width=\dimen104
\page@free=\dimen105
\premulticols=\dimen106
\postmulticols=\dimen107
\multicolsep=\skip43
\multicolbaselineskip=\skip44
\partial@page=\box27
\last@line=\box28
\mult@rightbox=\box29
\mult@grightbox=\box30
\mult@gfirstbox=\box31
\mult@firstbox=\box32
\@tempa=\box33
\@tempa=\box34
\@tempa=\box35
\@tempa=\box36
\@tempa=\box37
\@tempa=\box38
\@tempa=\box39
\@tempa=\box40
\@tempa=\box41
\@tempa=\box42
\@tempa=\box43
\@tempa=\box44
\@tempa=\box45
\@tempa=\box46
\@tempa=\box47
\@tempa=\box48
\@tempa=\box49
\c@columnbadness=\count94
\c@finalcolumnbadness=\count95
\last@try=\dimen108
\multicolovershoot=\dimen109
\multicolundershoot=\dimen110
\mult@nat@firstbox=\box50
) (../html.sty
Package: html 1996/02/01 v1.0 hypertext commands for latex2html (nd, hs)
\c@lpart=\count96
\c@lchapter=\count97
\c@lsection=\count98
\c@lsubsection=\count99
\c@lsubsubsection=\count100
\c@lparagraph=\count101
\c@lsubparagraph=\count102
\c@lsubsubparagraph=\count103
\c@lequation=\count104
) (/usr/lib/teTeX/texmf/tex/latex/syntax/syntax.sty
Package: syntax 1996/05/17 1.9 Syntax typesetting (MDW)
\grammarparsep=\skip45
\grammarindent=\dimen111
\sdstartspace=\skip46
\sdendspace=\skip47
\sdmidskip=\skip48
\sdtokskip=\skip49
\sdfinalskip=\skip50
\sdrulewidth=\dimen112
\sdcirclediam=\dimen113
\sdindent=\dimen114
) (../fpc.sty
Package: fpc 1996/12/09
(/usr/lib/teTeX/texmf/tex/latex/tools/xspace.sty
Package: xspace 1996/12/06 v1.05 Space after command names (DPC)
)) (/usr/lib/teTeX/texmf/tex/latex/listings/listings.sty
Package: listings 1997/09/29 v0.17 by Carsten Heinz
\lst@inputfile=\read1
\lst@lastno=\count105
\lst@lineno=\count106
\lst@commentdepth=\count107
\lst@width=\dimen115
\lst@length=\count108
\lst@pos=\count109
\lst@halfspread=\dimen116
\lst@other=\toks14
(/usr/lib/teTeX/texmf/tex/latex/listings/lstblank.sty)) (../lsttp.sty (/usr/lib
/teTeX/texmf/tex/latex/listings/lstpascal.sty)) (/usr/lib/teTeX/texmf/tex/latex
/fancyheadings/fancyheadings.sty
\headrulewidth=\dimen117
\footrulewidth=\dimen118
\plainheadrulewidth=\dimen119
\plainfootrulewidth=\dimen120
\headwidth=\dimen121
\footruleskip=\dimen122
)
\@indexfile=\write3
Writing index file images.idx

! LaTeX Error: Command \FPCList already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.98 ...t}{\begin{description}}{\end{description}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \functionl already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.112 }
       
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \procedurel already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.126 }
       
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seefl already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.130 }
       
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seepl already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.134 }
       
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seef already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.136 \newcommand {\seef}[1]{\seefl{#1}{#1}}
                                            
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seep already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.138 \newcommand {\seep}[1]{\seepl{#1}{#1}}
                                            
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seet already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.142 }
       
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seem already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.144 \newcommand {\seem}[2] {\texttt{#1} (#2) }
                                                
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \var already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.146 \newcommand {\var}[1]{\texttt {#1}}
                                         
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \file already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.148 \newcommand {\file}[1]{\textsf {#1}}
                                          
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \Procedurel already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.150 ...el}[5]{\procedurel{#1}{#2}{}{#3}{#4}{#5}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \Functionl already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.152 ...[6]{\functionl{#1}{#2}{}{#3}{#4}{#5}{#6}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \procedure already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.154 ...}[5]{\procedurel{#1}{#1}{#2}{#3}{#4}{#5}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \function already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.156 ...]{\functionl{#1}{#1}{#2}{#3}{#4}{#5}{#6}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \Procedure already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.158 ...ocedure}[4]{\procedure{#1}{}{#2}{#3}{#4}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \Function already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.160 ...tion}[5]{\function{#1}{}{#2}{#3}{#4}{#5}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \linux already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.162 \newcommand {\linux}{\textsc{LinuX} }
                                           
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \dos already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.164 \newcommand {\dos}  {\textsc{dos} }
                                         
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \msdos already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.166 \newcommand {\msdos}{\textsc{ms-dos} }
                                            
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \ostwo already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.168 \newcommand {\ostwo}{\textsc{os/2} }
                                          
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \windowsnt already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.170 ...command {\windowsnt}{\textsc{WindowsNT} }
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \windows already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.172 \newcommand {\windows}{\textsc{Windows} }
                                               
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \docdescription already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.174 \newcommand {\docdescription}[1]{}
                                        
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \docversion already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.176 \newcommand {\docversion}[1]{}
                                    
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \unitdescription already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.178 \newcommand {\unitdescription}[1]{}
                                         
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \unitversion already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.180 \newcommand {\unitversion}[1]{}
                                     
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \fpc already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.182 \newcommand {\fpc}{Free Pascal }
                                      
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \gnu already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.184 \newcommand {\gnu}{gnu }
                              
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \progref already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.186 ...Programmer's guide}{../prog/prog.html}\ }
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \refref already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.188 ...link{Reference guide}{../ref/ref.html}\ }
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \userref already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.190 ...llink{Users' guide}{../user/user.html}\ }
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \unitsref already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.192 ...k{Unit reference}{../units/units.html}\ }
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seecrt already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.194 ...\htmladdnormallink{CRT}{../crt/crt.html}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seelinux already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.196 ...ddnormallink{Linux}{../linux/linux.html}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seestrings already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.198 ...allink{strings}{../strings/strings.html}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seedos already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.200 ...\htmladdnormallink{DOS}{../dos/dos.html}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seegetopts already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.202 ...allink{getopts}{../getopts/getopts.html}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seeobjects already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.204 ...allink{objects}{../objects/objects.html}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seegraph already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.206 ...ddnormallink{graph}{../graph/graph.html}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seeprinter already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.208 ...allink{printer}{../printer/printer.html}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seego already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.210 ...mladdnormallink{GO32}{../go32/go32.html}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \CodEx already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.212 \newenvironment {CodEx}{}{}
                                 
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \FPCtable already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.214 ...1}}{\end{tabular}\end{center}\end{table}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \FPCltable already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.216 ...1}}{\end{tabular}\end{center}\end{table}}
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \seec already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.218 ...ommand {\seec}[1]{chapter (\ref{ch:#1}) }
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


! LaTeX Error: Command \sees already defined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.220 ...ommand {\sees}[1]{section (\ref{se:#1}) }
                                                  
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

\lthtmlwrite=\write4
\sizebox=\box51
No file images.aux.
LaTeX Font Info:    Checking defaults for OML/cmm/m/it on input line 232.
LaTeX Font Info:    ... okay on input line 232.
LaTeX Font Info:    Checking defaults for T1/cmr/m/n on input line 232.
LaTeX Font Info:    ... okay on input line 232.
LaTeX Font Info:    Checking defaults for OT1/cmr/m/n on input line 232.
LaTeX Font Info:    ... okay on input line 232.
LaTeX Font Info:    Checking defaults for OMS/cmsy/m/n on input line 232.
LaTeX Font Info:    ... okay on input line 232.
LaTeX Font Info:    Checking defaults for OMX/cmex/m/n on input line 232.
LaTeX Font Info:    ... okay on input line 232.
LaTeX Font Info:    Checking defaults for U/cmr/m/n on input line 232.
LaTeX Font Info:    ... okay on input line 232.
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.238 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.238 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.238 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.238 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{synt...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.238 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{synt...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 238 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.238 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{synt...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[1


]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.242 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.242 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.242 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.242 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\lit*{keyw...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.242 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\lit*{keyw...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 242 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.242 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\lit*{keyw...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[2

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.246 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.246 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.246 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.246 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\<[b] \syn...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.246 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\<[b] \syn...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 246 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.246 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\<[b] \syn...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[3

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.250 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.250 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.250 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.250 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\(
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.250 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\(
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 250 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.250 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\(
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[4

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.257 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.257 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.257 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.257 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\begin{dis...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.257 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\begin{dis...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 257 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.257 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\begin{dis...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[5

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.267 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.267 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.267 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.267 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{lett...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.267 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{lett...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 267 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.267 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{lett...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[6

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.271 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.271 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.271 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.271 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{digi...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.271 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{digi...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 271 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.271 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{digi...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[7

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.275 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.275 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.275 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.275 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{hex\...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.275 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{hex\...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 275 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.275 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{hex\...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[8

]
Overfull \vbox (550.0pt too high) has occurred while \output is active []


Overfull \vbox (549.0pt too high) has occurred while \output is active []


Overfull \vbox (548.0pt too high) has occurred while \output is active []


Overfull \vbox (547.0pt too high) has occurred while \output is active []


Overfull \vbox (546.0pt too high) has occurred while \output is active []


Overfull \vbox (545.0pt too high) has occurred while \output is active []


Overfull \vbox (544.0pt too high) has occurred while \output is active []


Overfull \vbox (543.0pt too high) has occurred while \output is active []


Overfull \vbox (542.0pt too high) has occurred while \output is active []


Overfull \vbox (541.0pt too high) has occurred while \output is active []


Overfull \vbox (540.0pt too high) has occurred while \output is active []


Overfull \vbox (539.0pt too high) has occurred while \output is active []


Overfull \vbox (538.0pt too high) has occurred while \output is active []


Overfull \vbox (537.0pt too high) has occurred while \output is active []


Overfull \vbox (536.0pt too high) has occurred while \output is active []


Overfull \vbox (535.0pt too high) has occurred while \output is active []


Overfull \vbox (534.0pt too high) has occurred while \output is active []


Overfull \vbox (533.0pt too high) has occurred while \output is active []


Overfull \vbox (532.0pt too high) has occurred while \output is active []


Overfull \vbox (531.0pt too high) has occurred while \output is active []


Overfull \vbox (530.0pt too high) has occurred while \output is active []


Overfull \vbox (529.0pt too high) has occurred while \output is active []


Overfull \vbox (528.0pt too high) has occurred while \output is active []


Overfull \vbox (527.0pt too high) has occurred while \output is active []


Overfull \vbox (526.0pt too high) has occurred while \output is active []


Overfull \vbox (525.0pt too high) has occurred while \output is active []


Overfull \vbox (524.0pt too high) has occurred while \output is active []


Overfull \vbox (523.0pt too high) has occurred while \output is active []


Overfull \vbox (522.0pt too high) has occurred while \output is active []


Overfull \vbox (521.0pt too high) has occurred while \output is active []


Overfull \vbox (520.0pt too high) has occurred while \output is active []


Overfull \vbox (519.0pt too high) has occurred while \output is active []


Overfull \vbox (518.0pt too high) has occurred while \output is active []


Overfull \vbox (517.0pt too high) has occurred while \output is active []


Overfull \vbox (516.0pt too high) has occurred while \output is active []


Overfull \vbox (515.0pt too high) has occurred while \output is active []


Overfull \vbox (514.0pt too high) has occurred while \output is active []


Overfull \vbox (513.0pt too high) has occurred while \output is active []


Overfull \vbox (512.0pt too high) has occurred while \output is active []


Overfull \vbox (511.0pt too high) has occurred while \output is active []


Overfull \vbox (510.0pt too high) has occurred while \output is active []


Overfull \vbox (509.0pt too high) has occurred while \output is active []


Overfull \vbox (508.0pt too high) has occurred while \output is active []


Overfull \vbox (507.0pt too high) has occurred while \output is active []


Overfull \vbox (506.0pt too high) has occurred while \output is active []


Overfull \vbox (505.0pt too high) has occurred while \output is active []


Overfull \vbox (504.0pt too high) has occurred while \output is active []


Overfull \vbox (503.0pt too high) has occurred while \output is active []


Overfull \vbox (502.0pt too high) has occurred while \output is active []


Overfull \vbox (501.0pt too high) has occurred while \output is active []


Overfull \vbox (500.0pt too high) has occurred while \output is active []


Overfull \vbox (499.0pt too high) has occurred while \output is active []


Overfull \vbox (498.0pt too high) has occurred while \output is active []


Overfull \vbox (497.0pt too high) has occurred while \output is active []


Overfull \vbox (496.0pt too high) has occurred while \output is active []


Overfull \vbox (495.0pt too high) has occurred while \output is active []


Overfull \vbox (494.0pt too high) has occurred while \output is active []


Overfull \vbox (493.0pt too high) has occurred while \output is active []


Overfull \vbox (492.0pt too high) has occurred while \output is active []


Overfull \vbox (491.0pt too high) has occurred while \output is active []


Overfull \vbox (490.0pt too high) has occurred while \output is active []


Overfull \vbox (489.0pt too high) has occurred while \output is active []


Overfull \vbox (488.0pt too high) has occurred while \output is active []


Overfull \vbox (487.0pt too high) has occurred while \output is active []


Overfull \vbox (486.0pt too high) has occurred while \output is active []


Overfull \vbox (485.0pt too high) has occurred while \output is active []


Overfull \vbox (484.0pt too high) has occurred while \output is active []


Overfull \vbox (483.0pt too high) has occurred while \output is active []


Overfull \vbox (482.0pt too high) has occurred while \output is active []


Overfull \vbox (481.0pt too high) has occurred while \output is active []


Overfull \vbox (480.0pt too high) has occurred while \output is active []


Overfull \vbox (479.0pt too high) has occurred while \output is active []


Overfull \vbox (478.0pt too high) has occurred while \output is active []


Overfull \vbox (477.0pt too high) has occurred while \output is active []


Overfull \vbox (476.0pt too high) has occurred while \output is active []


Overfull \vbox (475.0pt too high) has occurred while \output is active []


Overfull \vbox (474.0pt too high) has occurred while \output is active []


Overfull \vbox (473.0pt too high) has occurred while \output is active []


Overfull \vbox (472.0pt too high) has occurred while \output is active []


Overfull \vbox (471.0pt too high) has occurred while \output is active []


Overfull \vbox (470.0pt too high) has occurred while \output is active []


Overfull \vbox (469.0pt too high) has occurred while \output is active []


Overfull \vbox (468.0pt too high) has occurred while \output is active []


Overfull \vbox (467.0pt too high) has occurred while \output is active []


Overfull \vbox (466.0pt too high) has occurred while \output is active []


Overfull \vbox (465.0pt too high) has occurred while \output is active []


Overfull \vbox (464.0pt too high) has occurred while \output is active []


Overfull \vbox (463.0pt too high) has occurred while \output is active []


Overfull \vbox (462.0pt too high) has occurred while \output is active []


Overfull \vbox (461.0pt too high) has occurred while \output is active []


Overfull \vbox (460.0pt too high) has occurred while \output is active []


Overfull \vbox (459.0pt too high) has occurred while \output is active []


Overfull \vbox (458.0pt too high) has occurred while \output is active []


Overfull \vbox (457.0pt too high) has occurred while \output is active []


Overfull \vbox (456.0pt too high) has occurred while \output is active []


Overfull \vbox (455.0pt too high) has occurred while \output is active []


Overfull \vbox (454.0pt too high) has occurred while \output is active []


Overfull \vbox (453.0pt too high) has occurred while \output is active []


Overfull \vbox (452.0pt too high) has occurred while \output is active []


Overfull \vbox (451.0pt too high) has occurred while \output is active []


Overfull \vbox (450.0pt too high) has occurred while \output is active []


Overfull \vbox (449.0pt too high) has occurred while \output is active []


Overfull \vbox (448.0pt too high) has occurred while \output is active []


Overfull \vbox (447.0pt too high) has occurred while \output is active []


Overfull \vbox (446.0pt too high) has occurred while \output is active []


Overfull \vbox (445.0pt too high) has occurred while \output is active []


Overfull \vbox (444.0pt too high) has occurred while \output is active []


Overfull \vbox (443.0pt too high) has occurred while \output is active []


Overfull \vbox (442.0pt too high) has occurred while \output is active []


Overfull \vbox (441.0pt too high) has occurred while \output is active []


Overfull \vbox (440.0pt too high) has occurred while \output is active []


Overfull \vbox (439.0pt too high) has occurred while \output is active []


Overfull \vbox (438.0pt too high) has occurred while \output is active []


Overfull \vbox (437.0pt too high) has occurred while \output is active []


Overfull \vbox (436.0pt too high) has occurred while \output is active []


Overfull \vbox (435.0pt too high) has occurred while \output is active []


Overfull \vbox (434.0pt too high) has occurred while \output is active []


Overfull \vbox (433.0pt too high) has occurred while \output is active []


Overfull \vbox (432.0pt too high) has occurred while \output is active []


Overfull \vbox (431.0pt too high) has occurred while \output is active []


Overfull \vbox (430.0pt too high) has occurred while \output is active []


Overfull \vbox (429.0pt too high) has occurred while \output is active []


Overfull \vbox (428.0pt too high) has occurred while \output is active []


Overfull \vbox (427.0pt too high) has occurred while \output is active []


Overfull \vbox (426.0pt too high) has occurred while \output is active []


Overfull \vbox (425.0pt too high) has occurred while \output is active []


Overfull \vbox (424.0pt too high) has occurred while \output is active []


Overfull \vbox (423.0pt too high) has occurred while \output is active []


Overfull \vbox (422.0pt too high) has occurred while \output is active []


Overfull \vbox (421.0pt too high) has occurred while \output is active []


Overfull \vbox (420.0pt too high) has occurred while \output is active []


Overfull \vbox (419.0pt too high) has occurred while \output is active []


Overfull \vbox (418.0pt too high) has occurred while \output is active []


Overfull \vbox (417.0pt too high) has occurred while \output is active []


Overfull \vbox (416.0pt too high) has occurred while \output is active []


Overfull \vbox (415.0pt too high) has occurred while \output is active []


Overfull \vbox (414.0pt too high) has occurred while \output is active []


Overfull \vbox (413.0pt too high) has occurred while \output is active []


Overfull \vbox (412.0pt too high) has occurred while \output is active []


Overfull \vbox (411.0pt too high) has occurred while \output is active []


Overfull \vbox (410.0pt too high) has occurred while \output is active []


Overfull \vbox (409.0pt too high) has occurred while \output is active []


Overfull \vbox (408.0pt too high) has occurred while \output is active []


Overfull \vbox (407.0pt too high) has occurred while \output is active []


Overfull \vbox (406.0pt too high) has occurred while \output is active []


Overfull \vbox (405.0pt too high) has occurred while \output is active []


Overfull \vbox (404.0pt too high) has occurred while \output is active []


Overfull \vbox (403.0pt too high) has occurred while \output is active []


Overfull \vbox (402.0pt too high) has occurred while \output is active []


Overfull \vbox (401.0pt too high) has occurred while \output is active []


Overfull \vbox (400.0pt too high) has occurred while \output is active []


Overfull \vbox (399.0pt too high) has occurred while \output is active []


Overfull \vbox (398.0pt too high) has occurred while \output is active []


Overfull \vbox (397.0pt too high) has occurred while \output is active []


Overfull \vbox (396.0pt too high) has occurred while \output is active []


Overfull \vbox (395.0pt too high) has occurred while \output is active []


Overfull \vbox (394.0pt too high) has occurred while \output is active []


Overfull \vbox (393.0pt too high) has occurred while \output is active []


Overfull \vbox (392.0pt too high) has occurred while \output is active []


Overfull \vbox (391.0pt too high) has occurred while \output is active []


Overfull \vbox (390.0pt too high) has occurred while \output is active []


Overfull \vbox (389.0pt too high) has occurred while \output is active []


Overfull \vbox (388.0pt too high) has occurred while \output is active []


Overfull \vbox (387.0pt too high) has occurred while \output is active []


Overfull \vbox (386.0pt too high) has occurred while \output is active []


Overfull \vbox (385.0pt too high) has occurred while \output is active []


Overfull \vbox (384.0pt too high) has occurred while \output is active []


Overfull \vbox (383.0pt too high) has occurred while \output is active []


Overfull \vbox (382.0pt too high) has occurred while \output is active []


Overfull \vbox (381.0pt too high) has occurred while \output is active []


Overfull \vbox (380.0pt too high) has occurred while \output is active []


Overfull \vbox (379.0pt too high) has occurred while \output is active []


Overfull \vbox (378.0pt too high) has occurred while \output is active []


Overfull \vbox (377.0pt too high) has occurred while \output is active []


Overfull \vbox (376.0pt too high) has occurred while \output is active []


Overfull \vbox (375.0pt too high) has occurred while \output is active []


Overfull \vbox (374.0pt too high) has occurred while \output is active []


Overfull \vbox (373.0pt too high) has occurred while \output is active []


Overfull \vbox (372.0pt too high) has occurred while \output is active []


Overfull \vbox (371.0pt too high) has occurred while \output is active []


Overfull \vbox (370.0pt too high) has occurred while \output is active []


Overfull \vbox (369.0pt too high) has occurred while \output is active []


Overfull \vbox (368.0pt too high) has occurred while \output is active []


Overfull \vbox (367.0pt too high) has occurred while \output is active []


Overfull \vbox (366.0pt too high) has occurred while \output is active []


Overfull \vbox (365.0pt too high) has occurred while \output is active []


Overfull \vbox (364.0pt too high) has occurred while \output is active []


Overfull \vbox (363.0pt too high) has occurred while \output is active []


Overfull \vbox (362.0pt too high) has occurred while \output is active []


Overfull \vbox (361.0pt too high) has occurred while \output is active []


Overfull \vbox (360.0pt too high) has occurred while \output is active []


Overfull \vbox (359.0pt too high) has occurred while \output is active []


Overfull \vbox (358.0pt too high) has occurred while \output is active []


Overfull \vbox (357.0pt too high) has occurred while \output is active []


Overfull \vbox (356.0pt too high) has occurred while \output is active []


Overfull \vbox (355.0pt too high) has occurred while \output is active []


Overfull \vbox (354.0pt too high) has occurred while \output is active []


Overfull \vbox (353.0pt too high) has occurred while \output is active []


Overfull \vbox (352.0pt too high) has occurred while \output is active []


Overfull \vbox (351.0pt too high) has occurred while \output is active []


Overfull \vbox (350.0pt too high) has occurred while \output is active []


Overfull \vbox (349.0pt too high) has occurred while \output is active []


Overfull \vbox (348.0pt too high) has occurred while \output is active []


Overfull \vbox (347.0pt too high) has occurred while \output is active []


Overfull \vbox (346.0pt too high) has occurred while \output is active []


Overfull \vbox (345.0pt too high) has occurred while \output is active []


Overfull \vbox (344.0pt too high) has occurred while \output is active []


Overfull \vbox (343.0pt too high) has occurred while \output is active []


Overfull \vbox (342.0pt too high) has occurred while \output is active []


Overfull \vbox (341.0pt too high) has occurred while \output is active []


Overfull \vbox (340.0pt too high) has occurred while \output is active []


Overfull \vbox (339.0pt too high) has occurred while \output is active []


Overfull \vbox (338.0pt too high) has occurred while \output is active []


Overfull \vbox (337.0pt too high) has occurred while \output is active []


Overfull \vbox (336.0pt too high) has occurred while \output is active []


Overfull \vbox (335.0pt too high) has occurred while \output is active []


Overfull \vbox (334.0pt too high) has occurred while \output is active []


Overfull \vbox (333.0pt too high) has occurred while \output is active []


Overfull \vbox (332.0pt too high) has occurred while \output is active []


Overfull \vbox (331.0pt too high) has occurred while \output is active []


Overfull \vbox (330.0pt too high) has occurred while \output is active []


Overfull \vbox (329.0pt too high) has occurred while \output is active []


Overfull \vbox (328.0pt too high) has occurred while \output is active []


Overfull \vbox (327.0pt too high) has occurred while \output is active []


Overfull \vbox (326.0pt too high) has occurred while \output is active []


Overfull \vbox (325.0pt too high) has occurred while \output is active []


Overfull \vbox (324.0pt too high) has occurred while \output is active []


Overfull \vbox (323.0pt too high) has occurred while \output is active []


Overfull \vbox (322.0pt too high) has occurred while \output is active []


Overfull \vbox (321.0pt too high) has occurred while \output is active []


Overfull \vbox (320.0pt too high) has occurred while \output is active []


Overfull \vbox (319.0pt too high) has occurred while \output is active []


Overfull \vbox (318.0pt too high) has occurred while \output is active []


Overfull \vbox (317.0pt too high) has occurred while \output is active []


Overfull \vbox (316.0pt too high) has occurred while \output is active []


Overfull \vbox (315.0pt too high) has occurred while \output is active []


Overfull \vbox (314.0pt too high) has occurred while \output is active []


Overfull \vbox (313.0pt too high) has occurred while \output is active []


Overfull \vbox (312.0pt too high) has occurred while \output is active []


Overfull \vbox (311.0pt too high) has occurred while \output is active []


Overfull \vbox (310.0pt too high) has occurred while \output is active []


Overfull \vbox (309.0pt too high) has occurred while \output is active []


Overfull \vbox (308.0pt too high) has occurred while \output is active []


Overfull \vbox (307.0pt too high) has occurred while \output is active []


Overfull \vbox (306.0pt too high) has occurred while \output is active []


Overfull \vbox (305.0pt too high) has occurred while \output is active []


Overfull \vbox (304.0pt too high) has occurred while \output is active []


Overfull \vbox (303.0pt too high) has occurred while \output is active []


Overfull \vbox (302.0pt too high) has occurred while \output is active []


Overfull \vbox (301.0pt too high) has occurred while \output is active []


Overfull \vbox (300.0pt too high) has occurred while \output is active []


Overfull \vbox (299.0pt too high) has occurred while \output is active []


Overfull \vbox (298.0pt too high) has occurred while \output is active []


Overfull \vbox (297.0pt too high) has occurred while \output is active []


Overfull \vbox (296.0pt too high) has occurred while \output is active []


Overfull \vbox (295.0pt too high) has occurred while \output is active []


Overfull \vbox (294.0pt too high) has occurred while \output is active []


Overfull \vbox (293.0pt too high) has occurred while \output is active []


Overfull \vbox (292.0pt too high) has occurred while \output is active []


Overfull \vbox (291.0pt too high) has occurred while \output is active []


Overfull \vbox (290.0pt too high) has occurred while \output is active []


Overfull \vbox (289.0pt too high) has occurred while \output is active []


Overfull \vbox (288.0pt too high) has occurred while \output is active []


Overfull \vbox (287.0pt too high) has occurred while \output is active []


Overfull \vbox (286.0pt too high) has occurred while \output is active []


Overfull \vbox (285.0pt too high) has occurred while \output is active []


Overfull \vbox (284.0pt too high) has occurred while \output is active []


Overfull \vbox (283.0pt too high) has occurred while \output is active []


Overfull \vbox (282.0pt too high) has occurred while \output is active []


Overfull \vbox (281.0pt too high) has occurred while \output is active []


Overfull \vbox (280.0pt too high) has occurred while \output is active []


Overfull \vbox (279.0pt too high) has occurred while \output is active []


Overfull \vbox (278.0pt too high) has occurred while \output is active []


Overfull \vbox (277.0pt too high) has occurred while \output is active []


Overfull \vbox (276.0pt too high) has occurred while \output is active []


Overfull \vbox (275.0pt too high) has occurred while \output is active []


Overfull \vbox (274.0pt too high) has occurred while \output is active []


Overfull \vbox (273.0pt too high) has occurred while \output is active []


Overfull \vbox (272.0pt too high) has occurred while \output is active []


Overfull \vbox (271.0pt too high) has occurred while \output is active []


Overfull \vbox (270.0pt too high) has occurred while \output is active []


Overfull \vbox (269.0pt too high) has occurred while \output is active []


Overfull \vbox (268.0pt too high) has occurred while \output is active []


Overfull \vbox (267.0pt too high) has occurred while \output is active []


Overfull \vbox (266.0pt too high) has occurred while \output is active []


Overfull \vbox (265.0pt too high) has occurred while \output is active []


Overfull \vbox (264.0pt too high) has occurred while \output is active []


Overfull \vbox (263.0pt too high) has occurred while \output is active []


Overfull \vbox (262.0pt too high) has occurred while \output is active []


Overfull \vbox (261.0pt too high) has occurred while \output is active []


Overfull \vbox (260.0pt too high) has occurred while \output is active []


Overfull \vbox (259.0pt too high) has occurred while \output is active []


Overfull \vbox (258.0pt too high) has occurred while \output is active []


Overfull \vbox (257.0pt too high) has occurred while \output is active []


Overfull \vbox (256.0pt too high) has occurred while \output is active []


Overfull \vbox (255.0pt too high) has occurred while \output is active []


Overfull \vbox (254.0pt too high) has occurred while \output is active []


Overfull \vbox (253.0pt too high) has occurred while \output is active []


Overfull \vbox (252.0pt too high) has occurred while \output is active []


Overfull \vbox (251.0pt too high) has occurred while \output is active []


Overfull \vbox (250.0pt too high) has occurred while \output is active []


Overfull \vbox (249.0pt too high) has occurred while \output is active []


Overfull \vbox (248.0pt too high) has occurred while \output is active []


Overfull \vbox (247.0pt too high) has occurred while \output is active []


Overfull \vbox (246.0pt too high) has occurred while \output is active []


Overfull \vbox (245.0pt too high) has occurred while \output is active []


Overfull \vbox (244.0pt too high) has occurred while \output is active []


Overfull \vbox (243.0pt too high) has occurred while \output is active []


Overfull \vbox (242.0pt too high) has occurred while \output is active []


Overfull \vbox (241.0pt too high) has occurred while \output is active []


Overfull \vbox (240.0pt too high) has occurred while \output is active []


Overfull \vbox (239.0pt too high) has occurred while \output is active []


Overfull \vbox (238.0pt too high) has occurred while \output is active []


Overfull \vbox (237.0pt too high) has occurred while \output is active []


Overfull \vbox (236.0pt too high) has occurred while \output is active []


Overfull \vbox (235.0pt too high) has occurred while \output is active []


Overfull \vbox (234.0pt too high) has occurred while \output is active []


Overfull \vbox (233.0pt too high) has occurred while \output is active []


Overfull \vbox (232.0pt too high) has occurred while \output is active []


Overfull \vbox (231.0pt too high) has occurred while \output is active []


Overfull \vbox (230.0pt too high) has occurred while \output is active []


Overfull \vbox (229.0pt too high) has occurred while \output is active []


Overfull \vbox (228.0pt too high) has occurred while \output is active []


Overfull \vbox (227.0pt too high) has occurred while \output is active []


Overfull \vbox (226.0pt too high) has occurred while \output is active []


Overfull \vbox (225.0pt too high) has occurred while \output is active []


Overfull \vbox (224.0pt too high) has occurred while \output is active []


Overfull \vbox (223.0pt too high) has occurred while \output is active []


Overfull \vbox (222.0pt too high) has occurred while \output is active []


Overfull \vbox (221.0pt too high) has occurred while \output is active []


Overfull \vbox (220.0pt too high) has occurred while \output is active []


Overfull \vbox (219.0pt too high) has occurred while \output is active []


Overfull \vbox (218.0pt too high) has occurred while \output is active []


Overfull \vbox (217.0pt too high) has occurred while \output is active []


Overfull \vbox (216.0pt too high) has occurred while \output is active []


Overfull \vbox (215.0pt too high) has occurred while \output is active []


Overfull \vbox (214.0pt too high) has occurred while \output is active []


Overfull \vbox (213.0pt too high) has occurred while \output is active []


Overfull \vbox (212.0pt too high) has occurred while \output is active []


Overfull \vbox (211.0pt too high) has occurred while \output is active []


Overfull \vbox (210.0pt too high) has occurred while \output is active []


Overfull \vbox (209.0pt too high) has occurred while \output is active []


Overfull \vbox (208.0pt too high) has occurred while \output is active []


Overfull \vbox (207.0pt too high) has occurred while \output is active []


Overfull \vbox (206.0pt too high) has occurred while \output is active []


Overfull \vbox (205.0pt too high) has occurred while \output is active []


Overfull \vbox (204.0pt too high) has occurred while \output is active []


Overfull \vbox (203.0pt too high) has occurred while \output is active []


Overfull \vbox (202.0pt too high) has occurred while \output is active []


Overfull \vbox (201.0pt too high) has occurred while \output is active []


Overfull \vbox (200.0pt too high) has occurred while \output is active []


Overfull \vbox (199.0pt too high) has occurred while \output is active []


Overfull \vbox (198.0pt too high) has occurred while \output is active []


Overfull \vbox (197.0pt too high) has occurred while \output is active []


Overfull \vbox (196.0pt too high) has occurred while \output is active []


Overfull \vbox (195.0pt too high) has occurred while \output is active []


Overfull \vbox (194.0pt too high) has occurred while \output is active []


Overfull \vbox (193.0pt too high) has occurred while \output is active []


Overfull \vbox (192.0pt too high) has occurred while \output is active []


Overfull \vbox (191.0pt too high) has occurred while \output is active []


Overfull \vbox (190.0pt too high) has occurred while \output is active []


Overfull \vbox (189.0pt too high) has occurred while \output is active []


Overfull \vbox (188.0pt too high) has occurred while \output is active []


Overfull \vbox (187.0pt too high) has occurred while \output is active []


Overfull \vbox (186.0pt too high) has occurred while \output is active []


Overfull \vbox (185.0pt too high) has occurred while \output is active []


Overfull \vbox (184.0pt too high) has occurred while \output is active []


Overfull \vbox (183.0pt too high) has occurred while \output is active []


Overfull \vbox (182.0pt too high) has occurred while \output is active []


Overfull \vbox (181.0pt too high) has occurred while \output is active []


Overfull \vbox (180.0pt too high) has occurred while \output is active []


Overfull \vbox (179.0pt too high) has occurred while \output is active []


Overfull \vbox (178.0pt too high) has occurred while \output is active []


Overfull \vbox (177.0pt too high) has occurred while \output is active []


Overfull \vbox (176.0pt too high) has occurred while \output is active []


Overfull \vbox (175.0pt too high) has occurred while \output is active []


Overfull \vbox (174.0pt too high) has occurred while \output is active []


Overfull \vbox (173.0pt too high) has occurred while \output is active []


Overfull \vbox (172.0pt too high) has occurred while \output is active []


Overfull \vbox (171.0pt too high) has occurred while \output is active []


Overfull \vbox (170.0pt too high) has occurred while \output is active []


Overfull \vbox (169.0pt too high) has occurred while \output is active []


Overfull \vbox (168.0pt too high) has occurred while \output is active []


Overfull \vbox (167.0pt too high) has occurred while \output is active []


Overfull \vbox (166.0pt too high) has occurred while \output is active []


Overfull \vbox (165.0pt too high) has occurred while \output is active []


Overfull \vbox (164.0pt too high) has occurred while \output is active []


Overfull \vbox (163.0pt too high) has occurred while \output is active []


Overfull \vbox (162.0pt too high) has occurred while \output is active []


Overfull \vbox (161.0pt too high) has occurred while \output is active []


Overfull \vbox (160.0pt too high) has occurred while \output is active []


Overfull \vbox (159.0pt too high) has occurred while \output is active []


Overfull \vbox (158.0pt too high) has occurred while \output is active []


Overfull \vbox (157.0pt too high) has occurred while \output is active []


Overfull \vbox (156.0pt too high) has occurred while \output is active []


Overfull \vbox (155.0pt too high) has occurred while \output is active []


Overfull \vbox (154.0pt too high) has occurred while \output is active []


Overfull \vbox (153.0pt too high) has occurred while \output is active []


Overfull \vbox (152.0pt too high) has occurred while \output is active []


Overfull \vbox (151.0pt too high) has occurred while \output is active []


Overfull \vbox (150.0pt too high) has occurred while \output is active []


Overfull \vbox (149.0pt too high) has occurred while \output is active []


Overfull \vbox (148.0pt too high) has occurred while \output is active []


Overfull \vbox (147.0pt too high) has occurred while \output is active []


Overfull \vbox (146.0pt too high) has occurred while \output is active []


Overfull \vbox (145.0pt too high) has occurred while \output is active []


Overfull \vbox (144.0pt too high) has occurred while \output is active []


Overfull \vbox (143.0pt too high) has occurred while \output is active []


Overfull \vbox (142.0pt too high) has occurred while \output is active []


Overfull \vbox (141.0pt too high) has occurred while \output is active []


Overfull \vbox (140.0pt too high) has occurred while \output is active []


Overfull \vbox (139.0pt too high) has occurred while \output is active []


Overfull \vbox (138.0pt too high) has occurred while \output is active []


Overfull \vbox (137.0pt too high) has occurred while \output is active []


Overfull \vbox (136.0pt too high) has occurred while \output is active []


Overfull \vbox (135.0pt too high) has occurred while \output is active []


Overfull \vbox (134.0pt too high) has occurred while \output is active []


Overfull \vbox (133.0pt too high) has occurred while \output is active []


Overfull \vbox (132.0pt too high) has occurred while \output is active []


Overfull \vbox (131.0pt too high) has occurred while \output is active []


Overfull \vbox (130.0pt too high) has occurred while \output is active []


Overfull \vbox (129.0pt too high) has occurred while \output is active []


Overfull \vbox (128.0pt too high) has occurred while \output is active []


Overfull \vbox (127.0pt too high) has occurred while \output is active []


Overfull \vbox (126.0pt too high) has occurred while \output is active []


Overfull \vbox (125.0pt too high) has occurred while \output is active []


Overfull \vbox (124.0pt too high) has occurred while \output is active []


Overfull \vbox (123.0pt too high) has occurred while \output is active []


Overfull \vbox (122.0pt too high) has occurred while \output is active []


Overfull \vbox (121.0pt too high) has occurred while \output is active []


Overfull \vbox (120.0pt too high) has occurred while \output is active []


Overfull \vbox (119.0pt too high) has occurred while \output is active []


Overfull \vbox (118.0pt too high) has occurred while \output is active []


Overfull \vbox (117.0pt too high) has occurred while \output is active []


Overfull \vbox (116.0pt too high) has occurred while \output is active []


Overfull \vbox (115.0pt too high) has occurred while \output is active []


Overfull \vbox (114.0pt too high) has occurred while \output is active []


Overfull \vbox (113.0pt too high) has occurred while \output is active []


Overfull \vbox (112.0pt too high) has occurred while \output is active []


Overfull \vbox (111.0pt too high) has occurred while \output is active []


Overfull \vbox (110.0pt too high) has occurred while \output is active []


Overfull \vbox (109.0pt too high) has occurred while \output is active []


Overfull \vbox (108.0pt too high) has occurred while \output is active []


Overfull \vbox (107.0pt too high) has occurred while \output is active []


Overfull \vbox (106.0pt too high) has occurred while \output is active []


Overfull \vbox (105.0pt too high) has occurred while \output is active []


Overfull \vbox (104.0pt too high) has occurred while \output is active []


Overfull \vbox (103.0pt too high) has occurred while \output is active []


Overfull \vbox (102.0pt too high) has occurred while \output is active []


Overfull \vbox (101.0pt too high) has occurred while \output is active []


Overfull \vbox (100.0pt too high) has occurred while \output is active []


Overfull \vbox (99.0pt too high) has occurred while \output is active []


Overfull \vbox (98.0pt too high) has occurred while \output is active []


Overfull \vbox (97.0pt too high) has occurred while \output is active []


Overfull \vbox (96.0pt too high) has occurred while \output is active []


Overfull \vbox (95.0pt too high) has occurred while \output is active []


Overfull \vbox (94.0pt too high) has occurred while \output is active []


Overfull \vbox (93.0pt too high) has occurred while \output is active []


Overfull \vbox (92.0pt too high) has occurred while \output is active []


Overfull \vbox (91.0pt too high) has occurred while \output is active []


Overfull \vbox (90.0pt too high) has occurred while \output is active []


Overfull \vbox (89.0pt too high) has occurred while \output is active []


Overfull \vbox (88.0pt too high) has occurred while \output is active []


Overfull \vbox (87.0pt too high) has occurred while \output is active []


Overfull \vbox (86.0pt too high) has occurred while \output is active []


Overfull \vbox (85.0pt too high) has occurred while \output is active []


Overfull \vbox (84.0pt too high) has occurred while \output is active []


Overfull \vbox (83.0pt too high) has occurred while \output is active []


Overfull \vbox (82.0pt too high) has occurred while \output is active []


Overfull \vbox (81.0pt too high) has occurred while \output is active []


Overfull \vbox (80.0pt too high) has occurred while \output is active []


Overfull \vbox (79.0pt too high) has occurred while \output is active []


Overfull \vbox (78.0pt too high) has occurred while \output is active []


Overfull \vbox (77.0pt too high) has occurred while \output is active []


Overfull \vbox (76.0pt too high) has occurred while \output is active []


Overfull \vbox (75.0pt too high) has occurred while \output is active []


Overfull \vbox (74.0pt too high) has occurred while \output is active []


Overfull \vbox (73.0pt too high) has occurred while \output is active []


Overfull \vbox (72.0pt too high) has occurred while \output is active []


Overfull \vbox (71.0pt too high) has occurred while \output is active []


Overfull \vbox (70.0pt too high) has occurred while \output is active []


Overfull \vbox (69.0pt too high) has occurred while \output is active []


Overfull \vbox (68.0pt too high) has occurred while \output is active []


Overfull \vbox (67.0pt too high) has occurred while \output is active []


Overfull \vbox (66.0pt too high) has occurred while \output is active []


Overfull \vbox (65.0pt too high) has occurred while \output is active []


Overfull \vbox (64.0pt too high) has occurred while \output is active []


Overfull \vbox (63.0pt too high) has occurred while \output is active []


Overfull \vbox (62.0pt too high) has occurred while \output is active []


Overfull \vbox (61.0pt too high) has occurred while \output is active []


Overfull \vbox (60.0pt too high) has occurred while \output is active []


Overfull \vbox (59.0pt too high) has occurred while \output is active []


Overfull \vbox (58.0pt too high) has occurred while \output is active []


Overfull \vbox (57.0pt too high) has occurred while \output is active []


Overfull \vbox (56.0pt too high) has occurred while \output is active []


Overfull \vbox (55.0pt too high) has occurred while \output is active []


Overfull \vbox (54.0pt too high) has occurred while \output is active []


Overfull \vbox (53.0pt too high) has occurred while \output is active []


Overfull \vbox (52.0pt too high) has occurred while \output is active []


Overfull \vbox (51.0pt too high) has occurred while \output is active []


Overfull \vbox (50.0pt too high) has occurred while \output is active []


Overfull \vbox (49.0pt too high) has occurred while \output is active []

! Missing } inserted.
<inserted text> 
                }
l.345 \latex{\end{multicols}}
                             \hbox{}\vfil
I've inserted something that you may have forgotten.
(See the <inserted text> above.)
With luck, this will get me unwedged. But if you
really didn't forget anything, try typing `2' now; then
my insertion and my current dilemma will both disappear.

[9

]
Overfull \vbox (118.0pt too high) has occurred while \output is active []


Overfull \vbox (117.0pt too high) has occurred while \output is active []


Overfull \vbox (116.0pt too high) has occurred while \output is active []


Overfull \vbox (115.0pt too high) has occurred while \output is active []


Overfull \vbox (114.0pt too high) has occurred while \output is active []


Overfull \vbox (113.0pt too high) has occurred while \output is active []


Overfull \vbox (112.0pt too high) has occurred while \output is active []


Overfull \vbox (111.0pt too high) has occurred while \output is active []


Overfull \vbox (110.0pt too high) has occurred while \output is active []


Overfull \vbox (109.0pt too high) has occurred while \output is active []


Overfull \vbox (108.0pt too high) has occurred while \output is active []


Overfull \vbox (107.0pt too high) has occurred while \output is active []


Overfull \vbox (106.0pt too high) has occurred while \output is active []


Overfull \vbox (105.0pt too high) has occurred while \output is active []


Overfull \vbox (104.0pt too high) has occurred while \output is active []


Overfull \vbox (103.0pt too high) has occurred while \output is active []


Overfull \vbox (102.0pt too high) has occurred while \output is active []


Overfull \vbox (101.0pt too high) has occurred while \output is active []


Overfull \vbox (100.0pt too high) has occurred while \output is active []


Overfull \vbox (99.0pt too high) has occurred while \output is active []


Overfull \vbox (98.0pt too high) has occurred while \output is active []


Overfull \vbox (97.0pt too high) has occurred while \output is active []


Overfull \vbox (96.0pt too high) has occurred while \output is active []


Overfull \vbox (95.0pt too high) has occurred while \output is active []


Overfull \vbox (94.0pt too high) has occurred while \output is active []


Overfull \vbox (93.0pt too high) has occurred while \output is active []


Overfull \vbox (92.0pt too high) has occurred while \output is active []


Overfull \vbox (91.0pt too high) has occurred while \output is active []


Overfull \vbox (90.0pt too high) has occurred while \output is active []


Overfull \vbox (89.0pt too high) has occurred while \output is active []


Overfull \vbox (88.0pt too high) has occurred while \output is active []


Overfull \vbox (87.0pt too high) has occurred while \output is active []


Overfull \vbox (86.0pt too high) has occurred while \output is active []


Overfull \vbox (85.0pt too high) has occurred while \output is active []


Overfull \vbox (84.0pt too high) has occurred while \output is active []


Overfull \vbox (83.0pt too high) has occurred while \output is active []


Overfull \vbox (82.0pt too high) has occurred while \output is active []


Overfull \vbox (81.0pt too high) has occurred while \output is active []


Overfull \vbox (80.0pt too high) has occurred while \output is active []


Overfull \vbox (79.0pt too high) has occurred while \output is active []


Overfull \vbox (78.0pt too high) has occurred while \output is active []


Overfull \vbox (77.0pt too high) has occurred while \output is active []


Overfull \vbox (76.0pt too high) has occurred while \output is active []


Overfull \vbox (75.0pt too high) has occurred while \output is active []


Overfull \vbox (74.0pt too high) has occurred while \output is active []


Overfull \vbox (73.0pt too high) has occurred while \output is active []


Overfull \vbox (72.0pt too high) has occurred while \output is active []


Overfull \vbox (71.0pt too high) has occurred while \output is active []


Overfull \vbox (70.0pt too high) has occurred while \output is active []


Overfull \vbox (69.0pt too high) has occurred while \output is active []


Overfull \vbox (68.0pt too high) has occurred while \output is active []


Overfull \vbox (67.0pt too high) has occurred while \output is active []


Overfull \vbox (66.0pt too high) has occurred while \output is active []


Overfull \vbox (65.0pt too high) has occurred while \output is active []


Overfull \vbox (64.0pt too high) has occurred while \output is active []


Overfull \vbox (63.0pt too high) has occurred while \output is active []


Overfull \vbox (62.0pt too high) has occurred while \output is active []


Overfull \vbox (61.0pt too high) has occurred while \output is active []


Overfull \vbox (60.0pt too high) has occurred while \output is active []


Overfull \vbox (59.0pt too high) has occurred while \output is active []


Overfull \vbox (58.0pt too high) has occurred while \output is active []


Overfull \vbox (57.0pt too high) has occurred while \output is active []


Overfull \vbox (56.0pt too high) has occurred while \output is active []


Overfull \vbox (55.0pt too high) has occurred while \output is active []


Overfull \vbox (54.0pt too high) has occurred while \output is active []


Overfull \vbox (53.0pt too high) has occurred while \output is active []


Overfull \vbox (52.0pt too high) has occurred while \output is active []


Overfull \vbox (51.0pt too high) has occurred while \output is active []


Overfull \vbox (50.0pt too high) has occurred while \output is active []


Overfull \vbox (49.0pt too high) has occurred while \output is active []

! Missing } inserted.
<inserted text> 
                }
l.363 \latex{\end{multicols}}
                             \hbox{}\vfil
I've inserted something that you may have forgotten.
(See the <inserted text> above.)
With luck, this will get me unwedged. But if you
really didn't forget anything, try typing `2' now; then
my insertion and my current dilemma will both disappear.

[10

]
Overfull \vbox (70.0pt too high) has occurred while \output is active []


Overfull \vbox (69.0pt too high) has occurred while \output is active []


Overfull \vbox (68.0pt too high) has occurred while \output is active []


Overfull \vbox (67.0pt too high) has occurred while \output is active []


Overfull \vbox (66.0pt too high) has occurred while \output is active []


Overfull \vbox (65.0pt too high) has occurred while \output is active []


Overfull \vbox (64.0pt too high) has occurred while \output is active []


Overfull \vbox (63.0pt too high) has occurred while \output is active []


Overfull \vbox (62.0pt too high) has occurred while \output is active []


Overfull \vbox (61.0pt too high) has occurred while \output is active []


Overfull \vbox (60.0pt too high) has occurred while \output is active []


Overfull \vbox (59.0pt too high) has occurred while \output is active []


Overfull \vbox (58.0pt too high) has occurred while \output is active []


Overfull \vbox (57.0pt too high) has occurred while \output is active []


Overfull \vbox (56.0pt too high) has occurred while \output is active []


Overfull \vbox (55.0pt too high) has occurred while \output is active []


Overfull \vbox (54.0pt too high) has occurred while \output is active []


Overfull \vbox (53.0pt too high) has occurred while \output is active []


Overfull \vbox (52.0pt too high) has occurred while \output is active []


Overfull \vbox (51.0pt too high) has occurred while \output is active []


Overfull \vbox (50.0pt too high) has occurred while \output is active []


Overfull \vbox (49.0pt too high) has occurred while \output is active []

! Missing } inserted.
<inserted text> 
                }
l.375 \latex{\end{multicols}}
                             \hbox{}\vfil
I've inserted something that you may have forgotten.
(See the <inserted text> above.)
With luck, this will get me unwedged. But if you
really didn't forget anything, try typing `2' now; then
my insertion and my current dilemma will both disappear.

[11

]
Overfull \vbox (226.0pt too high) has occurred while \output is active []


Overfull \vbox (225.0pt too high) has occurred while \output is active []


Overfull \vbox (224.0pt too high) has occurred while \output is active []


Overfull \vbox (223.0pt too high) has occurred while \output is active []


Overfull \vbox (222.0pt too high) has occurred while \output is active []


Overfull \vbox (221.0pt too high) has occurred while \output is active []


Overfull \vbox (220.0pt too high) has occurred while \output is active []


Overfull \vbox (219.0pt too high) has occurred while \output is active []


Overfull \vbox (218.0pt too high) has occurred while \output is active []


Overfull \vbox (217.0pt too high) has occurred while \output is active []


Overfull \vbox (216.0pt too high) has occurred while \output is active []


Overfull \vbox (215.0pt too high) has occurred while \output is active []


Overfull \vbox (214.0pt too high) has occurred while \output is active []


Overfull \vbox (213.0pt too high) has occurred while \output is active []


Overfull \vbox (212.0pt too high) has occurred while \output is active []


Overfull \vbox (211.0pt too high) has occurred while \output is active []


Overfull \vbox (210.0pt too high) has occurred while \output is active []


Overfull \vbox (209.0pt too high) has occurred while \output is active []


Overfull \vbox (208.0pt too high) has occurred while \output is active []


Overfull \vbox (207.0pt too high) has occurred while \output is active []


Overfull \vbox (206.0pt too high) has occurred while \output is active []


Overfull \vbox (205.0pt too high) has occurred while \output is active []


Overfull \vbox (204.0pt too high) has occurred while \output is active []


Overfull \vbox (203.0pt too high) has occurred while \output is active []


Overfull \vbox (202.0pt too high) has occurred while \output is active []


Overfull \vbox (201.0pt too high) has occurred while \output is active []


Overfull \vbox (200.0pt too high) has occurred while \output is active []


Overfull \vbox (199.0pt too high) has occurred while \output is active []


Overfull \vbox (198.0pt too high) has occurred while \output is active []


Overfull \vbox (197.0pt too high) has occurred while \output is active []


Overfull \vbox (196.0pt too high) has occurred while \output is active []


Overfull \vbox (195.0pt too high) has occurred while \output is active []


Overfull \vbox (194.0pt too high) has occurred while \output is active []


Overfull \vbox (193.0pt too high) has occurred while \output is active []


Overfull \vbox (192.0pt too high) has occurred while \output is active []


Overfull \vbox (191.0pt too high) has occurred while \output is active []


Overfull \vbox (190.0pt too high) has occurred while \output is active []


Overfull \vbox (189.0pt too high) has occurred while \output is active []


Overfull \vbox (188.0pt too high) has occurred while \output is active []


Overfull \vbox (187.0pt too high) has occurred while \output is active []


Overfull \vbox (186.0pt too high) has occurred while \output is active []


Overfull \vbox (185.0pt too high) has occurred while \output is active []


Overfull \vbox (184.0pt too high) has occurred while \output is active []


Overfull \vbox (183.0pt too high) has occurred while \output is active []


Overfull \vbox (182.0pt too high) has occurred while \output is active []


Overfull \vbox (181.0pt too high) has occurred while \output is active []


Overfull \vbox (180.0pt too high) has occurred while \output is active []


Overfull \vbox (179.0pt too high) has occurred while \output is active []


Overfull \vbox (178.0pt too high) has occurred while \output is active []


Overfull \vbox (177.0pt too high) has occurred while \output is active []


Overfull \vbox (176.0pt too high) has occurred while \output is active []


Overfull \vbox (175.0pt too high) has occurred while \output is active []


Overfull \vbox (174.0pt too high) has occurred while \output is active []


Overfull \vbox (173.0pt too high) has occurred while \output is active []


Overfull \vbox (172.0pt too high) has occurred while \output is active []


Overfull \vbox (171.0pt too high) has occurred while \output is active []


Overfull \vbox (170.0pt too high) has occurred while \output is active []


Overfull \vbox (169.0pt too high) has occurred while \output is active []


Overfull \vbox (168.0pt too high) has occurred while \output is active []


Overfull \vbox (167.0pt too high) has occurred while \output is active []


Overfull \vbox (166.0pt too high) has occurred while \output is active []


Overfull \vbox (165.0pt too high) has occurred while \output is active []


Overfull \vbox (164.0pt too high) has occurred while \output is active []


Overfull \vbox (163.0pt too high) has occurred while \output is active []


Overfull \vbox (162.0pt too high) has occurred while \output is active []


Overfull \vbox (161.0pt too high) has occurred while \output is active []


Overfull \vbox (160.0pt too high) has occurred while \output is active []


Overfull \vbox (159.0pt too high) has occurred while \output is active []


Overfull \vbox (158.0pt too high) has occurred while \output is active []


Overfull \vbox (157.0pt too high) has occurred while \output is active []


Overfull \vbox (156.0pt too high) has occurred while \output is active []


Overfull \vbox (155.0pt too high) has occurred while \output is active []


Overfull \vbox (154.0pt too high) has occurred while \output is active []


Overfull \vbox (153.0pt too high) has occurred while \output is active []


Overfull \vbox (152.0pt too high) has occurred while \output is active []


Overfull \vbox (151.0pt too high) has occurred while \output is active []


Overfull \vbox (150.0pt too high) has occurred while \output is active []


Overfull \vbox (149.0pt too high) has occurred while \output is active []


Overfull \vbox (148.0pt too high) has occurred while \output is active []


Overfull \vbox (147.0pt too high) has occurred while \output is active []


Overfull \vbox (146.0pt too high) has occurred while \output is active []


Overfull \vbox (145.0pt too high) has occurred while \output is active []


Overfull \vbox (144.0pt too high) has occurred while \output is active []


Overfull \vbox (143.0pt too high) has occurred while \output is active []


Overfull \vbox (142.0pt too high) has occurred while \output is active []


Overfull \vbox (141.0pt too high) has occurred while \output is active []


Overfull \vbox (140.0pt too high) has occurred while \output is active []


Overfull \vbox (139.0pt too high) has occurred while \output is active []


Overfull \vbox (138.0pt too high) has occurred while \output is active []


Overfull \vbox (137.0pt too high) has occurred while \output is active []


Overfull \vbox (136.0pt too high) has occurred while \output is active []


Overfull \vbox (135.0pt too high) has occurred while \output is active []


Overfull \vbox (134.0pt too high) has occurred while \output is active []


Overfull \vbox (133.0pt too high) has occurred while \output is active []


Overfull \vbox (132.0pt too high) has occurred while \output is active []


Overfull \vbox (131.0pt too high) has occurred while \output is active []


Overfull \vbox (130.0pt too high) has occurred while \output is active []


Overfull \vbox (129.0pt too high) has occurred while \output is active []


Overfull \vbox (128.0pt too high) has occurred while \output is active []


Overfull \vbox (127.0pt too high) has occurred while \output is active []


Overfull \vbox (126.0pt too high) has occurred while \output is active []


Overfull \vbox (125.0pt too high) has occurred while \output is active []


Overfull \vbox (124.0pt too high) has occurred while \output is active []


Overfull \vbox (123.0pt too high) has occurred while \output is active []


Overfull \vbox (122.0pt too high) has occurred while \output is active []


Overfull \vbox (121.0pt too high) has occurred while \output is active []


Overfull \vbox (120.0pt too high) has occurred while \output is active []


Overfull \vbox (119.0pt too high) has occurred while \output is active []


Overfull \vbox (118.0pt too high) has occurred while \output is active []


Overfull \vbox (117.0pt too high) has occurred while \output is active []


Overfull \vbox (116.0pt too high) has occurred while \output is active []


Overfull \vbox (115.0pt too high) has occurred while \output is active []


Overfull \vbox (114.0pt too high) has occurred while \output is active []


Overfull \vbox (113.0pt too high) has occurred while \output is active []


Overfull \vbox (112.0pt too high) has occurred while \output is active []


Overfull \vbox (111.0pt too high) has occurred while \output is active []


Overfull \vbox (110.0pt too high) has occurred while \output is active []


Overfull \vbox (109.0pt too high) has occurred while \output is active []


Overfull \vbox (108.0pt too high) has occurred while \output is active []


Overfull \vbox (107.0pt too high) has occurred while \output is active []


Overfull \vbox (106.0pt too high) has occurred while \output is active []


Overfull \vbox (105.0pt too high) has occurred while \output is active []


Overfull \vbox (104.0pt too high) has occurred while \output is active []


Overfull \vbox (103.0pt too high) has occurred while \output is active []


Overfull \vbox (102.0pt too high) has occurred while \output is active []


Overfull \vbox (101.0pt too high) has occurred while \output is active []


Overfull \vbox (100.0pt too high) has occurred while \output is active []


Overfull \vbox (99.0pt too high) has occurred while \output is active []


Overfull \vbox (98.0pt too high) has occurred while \output is active []


Overfull \vbox (97.0pt too high) has occurred while \output is active []


Overfull \vbox (96.0pt too high) has occurred while \output is active []


Overfull \vbox (95.0pt too high) has occurred while \output is active []


Overfull \vbox (94.0pt too high) has occurred while \output is active []


Overfull \vbox (93.0pt too high) has occurred while \output is active []


Overfull \vbox (92.0pt too high) has occurred while \output is active []


Overfull \vbox (91.0pt too high) has occurred while \output is active []


Overfull \vbox (90.0pt too high) has occurred while \output is active []


Overfull \vbox (89.0pt too high) has occurred while \output is active []


Overfull \vbox (88.0pt too high) has occurred while \output is active []


Overfull \vbox (87.0pt too high) has occurred while \output is active []


Overfull \vbox (86.0pt too high) has occurred while \output is active []


Overfull \vbox (85.0pt too high) has occurred while \output is active []


Overfull \vbox (84.0pt too high) has occurred while \output is active []


Overfull \vbox (83.0pt too high) has occurred while \output is active []


Overfull \vbox (82.0pt too high) has occurred while \output is active []


Overfull \vbox (81.0pt too high) has occurred while \output is active []


Overfull \vbox (80.0pt too high) has occurred while \output is active []


Overfull \vbox (79.0pt too high) has occurred while \output is active []


Overfull \vbox (78.0pt too high) has occurred while \output is active []


Overfull \vbox (77.0pt too high) has occurred while \output is active []


Overfull \vbox (76.0pt too high) has occurred while \output is active []


Overfull \vbox (75.0pt too high) has occurred while \output is active []


Overfull \vbox (74.0pt too high) has occurred while \output is active []


Overfull \vbox (73.0pt too high) has occurred while \output is active []


Overfull \vbox (72.0pt too high) has occurred while \output is active []


Overfull \vbox (71.0pt too high) has occurred while \output is active []


Overfull \vbox (70.0pt too high) has occurred while \output is active []


Overfull \vbox (69.0pt too high) has occurred while \output is active []


Overfull \vbox (68.0pt too high) has occurred while \output is active []


Overfull \vbox (67.0pt too high) has occurred while \output is active []


Overfull \vbox (66.0pt too high) has occurred while \output is active []


Overfull \vbox (65.0pt too high) has occurred while \output is active []


Overfull \vbox (64.0pt too high) has occurred while \output is active []


Overfull \vbox (63.0pt too high) has occurred while \output is active []


Overfull \vbox (62.0pt too high) has occurred while \output is active []


Overfull \vbox (61.0pt too high) has occurred while \output is active []


Overfull \vbox (60.0pt too high) has occurred while \output is active []


Overfull \vbox (59.0pt too high) has occurred while \output is active []


Overfull \vbox (58.0pt too high) has occurred while \output is active []


Overfull \vbox (57.0pt too high) has occurred while \output is active []


Overfull \vbox (56.0pt too high) has occurred while \output is active []


Overfull \vbox (55.0pt too high) has occurred while \output is active []


Overfull \vbox (54.0pt too high) has occurred while \output is active []


Overfull \vbox (53.0pt too high) has occurred while \output is active []


Overfull \vbox (52.0pt too high) has occurred while \output is active []


Overfull \vbox (51.0pt too high) has occurred while \output is active []


Overfull \vbox (50.0pt too high) has occurred while \output is active []


Overfull \vbox (49.0pt too high) has occurred while \output is active []

! Missing } inserted.
<inserted text> 
                }
l.405 \latex{\end{multicols}}
                             \hbox{}\vfil
I've inserted something that you may have forgotten.
(See the <inserted text> above.)
With luck, this will get me unwedged. But if you
really didn't forget anything, try typing `2' now; then
my insertion and my current dilemma will both disappear.

[12

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.409 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.409 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.409 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.409 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.409 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 409 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.409 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[13

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.422 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.422 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.422 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.422 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{hex\...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.422 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{hex\...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 422 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.422 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{hex\...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[14

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.429 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.429 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.429 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.429 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{bin\...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.429 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{bin\...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 429 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.429 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{bin\...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[15

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.439 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.439 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.439 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.439 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{digi...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.439 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{digi...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 439 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.439 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{digi...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[16

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.446 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.446 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.446 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.446 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unsi...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.446 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unsi...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 446 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.446 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unsi...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[17

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.455 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.455 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.455 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.455 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppysign \begi...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.455 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppysign \begi...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 455 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.455 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppysign \begi...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Undefined control sequence.
l.455 ...\end{tex2html_nowrap}\sffamily\sloppysign
                                                   \begin{stack} \lit* + \\ ...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

[18

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.459 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.459 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.459 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.459 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unsi...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.459 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unsi...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 459 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.459 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unsi...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[19

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.469 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.469 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.469 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.469 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{scal...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.469 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{scal...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 469 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.469 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{scal...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[20

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.474 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.474 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.474 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.474 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unsi...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.474 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unsi...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 474 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.474 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unsi...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[21

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.479 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.479 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.479 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.479 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{sign...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.479 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{sign...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 479 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.479 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{sign...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[22

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.485 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.485 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.485 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.485 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.485 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 485 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.485 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[23

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.491 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.491 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.491 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.491 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{char...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.491 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{char...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 491 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.491 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{char...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[24

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.496 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.496 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.496 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.496 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{quot...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.496 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{quot...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 496 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.496 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{quot...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[25

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.503 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.503 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.503 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.503 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{stri...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.503 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{stri...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 503 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.503 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{stri...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[26

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.511 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.511 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.511 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.511 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cont...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.511 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cont...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 511 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.511 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cont...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[27

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.520 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.520 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.520 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.520 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.520 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 520 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.520 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[28

]

LaTeX Font Warning: Font shape `OT1/cmss/m/it' in size <10> not available
(Font)              Font shape `OT1/cmss/m/sl' tried instead on input line 528.


LaTeX Font Info:    External font `cmex10' loaded for size
(Font)              <7> on input line 529.
LaTeX Font Info:    External font `cmex10' loaded for size
(Font)              <5> on input line 529.
[29

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.543 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.543 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.543 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.543 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{type...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.543 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{type...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 543 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.543 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{type...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[30


]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.550 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.550 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.550 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.550 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{type...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.550 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{type...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 550 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.550 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{type...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[31

] [32

] [33


] [34

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.587 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.587 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.587 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.587 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.587 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 587 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.587 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[35

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.592 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.592 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.592 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.592 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.592 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 592 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.592 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[36

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.606 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.606 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.606 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.606 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{simp...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.606 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{simp...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 606 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.606 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{simp...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[37

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.614 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.614 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.614 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.614 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{real...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.614 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{real...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 614 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.614 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{real...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[38

] [39

] [40

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.634 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.634 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.634 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.634 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{enum...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.634 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{enum...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 634 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.634 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{enum...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[41

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.645 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.645 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.645 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.645 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{iden...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.645 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{iden...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 645 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.645 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{iden...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[42

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.653 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.653 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.653 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.653 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{assi...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.653 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{assi...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 653 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.653 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{assi...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[43

] [44

] [45

] [46

] [47

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.692 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.692 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.692 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.692 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.692 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 692 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.692 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[48

] [49

] [50

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.718 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.718 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.718 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.718 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.718 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 718 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.718 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[51

] [52

] [53

] [54

] [55

] [56

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.776 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.776 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.776 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.776 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.776 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 776 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.776 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[57

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.790 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.790 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.790 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.790 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.790 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 790 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.790 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[58

] [59

] [60

] [61

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.814 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.814 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.814 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.814 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{reco...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.814 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{reco...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 814 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.814 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{reco...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[62

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.819 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.819 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.819 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.819 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fiel...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.819 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fiel...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 819 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.819 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fiel...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[63

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.828 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.828 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.828 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.828 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fixe...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.828 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fixe...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 828 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.828 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fixe...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[64

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.833 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.833 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.833 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.833 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{vari...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.833 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{vari...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 833 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.833 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{vari...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[65

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.841 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.841 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.841 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.841 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{vari...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.841 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{vari...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 841 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.841 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{vari...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[66

] [67

] [68

] [69

] [70

] [71

] [72

] [73

] [74

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.949 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.949 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.949 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.949 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.949 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 949 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.949 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[75

] [76

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.967 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.967 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.967 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.967 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.967 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 967 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.967 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[77


] [78

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.981 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.981 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.981 \begin{syntdiag}\begin{tex2html_nowrap}
                                             \setlength{\sdmidskip}{.5em}\en...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.981 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.981 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 981 ended by \end{tex2html\@uscor
e.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.981 ...th{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[79

] [80

] [81



] [82

] [83

] [84

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1051 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1051 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1051 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1051 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1051 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1051 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1051 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[85

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1060 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1060 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1060 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1060 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{func...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1060 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{func...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1060 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1060 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{func...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


Overfull \hbox (6.0145pt too wide) in paragraph at lines 1060--1062
[][] []\OT1/cmr/m/n/9 -nowrap[]-nowrap[][][][][]  []
 []

[86

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1065 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1065 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1065 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1065 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1065 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1065 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1065 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[87

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1069 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1069 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1069 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1069 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{call...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1069 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{call...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1069 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1069 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{call...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[88

] [89

] [90

] [91

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1118 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1118 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1118 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1118 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\begin{dis...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1118 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\begin{dis...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1118 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1118 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\begin{dis...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[92

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1130 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1130 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1130 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1130 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{heri...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1130 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{heri...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1130 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1130 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{heri...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[93

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1134 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1134 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1134 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1134 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{comp...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1134 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{comp...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1134 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1134 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{comp...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[94

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1140 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1140 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1140 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1140 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fiel...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1140 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fiel...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1140 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1140 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fiel...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[95

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1144 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1144 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1144 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1144 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{meth...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1144 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{meth...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1144 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1144 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{meth...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[96

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1155 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1155 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1155 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1155 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{meth...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1155 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{meth...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1155 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1155 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{meth...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[97

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1166 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1166 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1166 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1166 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{obje...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1166 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{obje...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1166 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1166 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{obje...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[98

] [99

] [100

] [101

] [102

] [103


] [104

] [105

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1244 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1244 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1244 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1244 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cons...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1244 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cons...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1244 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1244 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cons...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


Overfull \hbox (3.47089pt too wide) in paragraph at lines 1244--1246
[][] []\OT1/cmr/m/n/9 -nowrap[]-nowrap[][][][]  []
 []

[106

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1249 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1249 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1249 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1249 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{dest...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1249 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{dest...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1249 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1249 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{dest...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[107

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1254 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1254 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1254 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1254 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cons...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1254 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cons...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1254 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1254 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cons...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[108

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1261 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1261 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1261 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1261 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{desc...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1261 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{desc...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1261 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1261 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{desc...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[109

] [110

] [111



] [112

] [113

] [114

] [115

] [116

] [117

] [118

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1396 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1396 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1396 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1396 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\begin{dis...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1396 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\begin{dis...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1396 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1396 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\begin{dis...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[119

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1408 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1408 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1408 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1408 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{heri...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1408 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{heri...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1408 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1408 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{heri...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[120

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1412 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1412 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1412 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1412 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{comp...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1412 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{comp...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1412 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1412 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{comp...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[121

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1425 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1425 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1425 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1425 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fiel...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1425 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fiel...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1425 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1425 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fiel...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[122

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1429 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1429 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1429 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1429 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{meth...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1429 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{meth...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1429 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1429 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{meth...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[123

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1452 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1452 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1452 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1452 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{clas...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1452 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{clas...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1452 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1452 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{clas...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[124

] [125


]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1477 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1477 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1477 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1477 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prop...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1477 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prop...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1477 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1477 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prop...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[126

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1483 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1483 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1483 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1483 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prop...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1483 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prop...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1483 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1483 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prop...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[127

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1491 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1491 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1491 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1491 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prop...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1491 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prop...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1491 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1491 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prop...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[128

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1497 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1497 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1497 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1497 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prop...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1497 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prop...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1497 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1497 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prop...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[129

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1504 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1504 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1504 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1504 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{read...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1504 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{read...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1504 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1504 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{read...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[130

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1508 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1508 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1508 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1508 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{writ...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1508 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{writ...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1508 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1508 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{writ...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[131

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1512 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1512 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1512 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1512 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{defa...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1512 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{defa...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1512 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1512 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{defa...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[132

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1520 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1520 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1520 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1520 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fiel...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1520 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fiel...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1520 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1520 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fiel...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[133

] [134

] [135

]
Overfull \hbox (4.65373pt too wide) in paragraph at lines 1565--1566
[][][][][][][][][][][][][][][][][][][] 
 []


Overfull \hbox (28.65398pt too wide) in paragraph at lines 1567--1568
[][][][][][][][][][][][][][][][][][][][][][][][][] 
 []


Overfull \hbox (28.65398pt too wide) in paragraph at lines 1568--1569
[][][][][][][][][][][][][][][][][][][][][][][][][] 
 []


Overfull \hbox (4.65373pt too wide) in paragraph at lines 1572--1573
[][][][][][][][][][][][][][] 
 []

[136


]
Overfull \hbox (10.6538pt too wide) in paragraph at lines 1611--1612
[][][][][][][][][][][][][][][][][][][] 
 []


Overfull \hbox (22.65392pt too wide) in paragraph at lines 1612--1613
[][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][
][][][][][][][][][][] 
 []

[137

] [138

] [139

] [140

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1647 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1647 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1647 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1647 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{expr...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1647 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{expr...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1647 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1647 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{expr...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[141



]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1665 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1665 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1665 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1665 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{simp...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1665 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{simp...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1665 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1665 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{simp...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[142

] [143

] [144

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1689 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1689 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1689 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1689 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1689 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1689 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1689 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[145

] [146

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1712 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1712 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1712 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1712 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{factor}
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1712 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{factor}
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1712 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1712 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{factor}

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[147

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1726 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1726 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1726 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1726 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unsi...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1726 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unsi...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1726 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1726 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unsi...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[148

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1736 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1736 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1736 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1736 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{func...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1736 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{func...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1736 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1736 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{func...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[149

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1749 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1749 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1749 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1749 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{actu...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1749 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{actu...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1749 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1749 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{actu...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[150

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1761 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1761 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1761 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1761 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{actu...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1761 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{actu...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1761 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1761 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{actu...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[151

] [152

] [153

] [154

] [155

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1808 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1808 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1808 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1808 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{set\...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1808 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{set\...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1808 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1808 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{set\...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[156

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1816 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1816 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1816 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1816 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{set\...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1816 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{set\...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1816 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1816 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{set\...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[157

] [158

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1831 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1831 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1831 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1831 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1831 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1831 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1831 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[159

] [160

] [161

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1855 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1855 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1855 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1855 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1855 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1855 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1855 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[162

] [163

] [164


] [165


] [166

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1919 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1919 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1919 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1919 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1919 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1919 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1919 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[167

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1933 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1933 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1933 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1933 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1933 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1933 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1933 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[168

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1945 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1945 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1945 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1945 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1945 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1945 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1945 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[169

]
Overfull \hbox (4.65373pt too wide) in paragraph at lines 1963--1964
[][][][][][][][][][][][][][][][][][][][][][][][][][][][][][] 
 []


Overfull \hbox (4.65373pt too wide) in paragraph at lines 1964--1965
[][][][][][][][][][][][][][][][][][][][][][][][][][][][][][] 
 []

[170

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1972 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1972 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1972 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1972 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1972 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1972 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1972 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[171

] [172

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1993 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.1993 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1993 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.1993 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.1993 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 1993 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.1993 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[173

] [174

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2010 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2010 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2010 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2010 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2010 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2010 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2010 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[175

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2022 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2022 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2022 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2022 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2022 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2022 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2022 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[176

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2031 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2031 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2031 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2031 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2031 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2031 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2031 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[177

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2042 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2042 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2042 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2042 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2042 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2042 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2042 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[178

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2051 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2051 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2051 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2051 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{case...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2051 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{case...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2051 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2051 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{case...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[179

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2059 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2059 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2059 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2059 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{case}
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2059 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{case}
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2059 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2059 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{case}
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[180

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2069 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2069 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2069 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2069 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{else...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2069 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{else...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2069 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2069 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{else...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[181

] [182

] [183

] [184

] [185

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2111 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2111 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2111 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2111 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2111 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2111 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2111 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[186

] [187

] [188

] [189

] [190

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2159 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2159 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2159 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2159 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{for\...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2159 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{for\...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2159 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2159 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{for\...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[191

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2174 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2174 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2174 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2174 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cont...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2174 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cont...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2174 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2174 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cont...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[192

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2178 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2178 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2178 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2178 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{init...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2178 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{init...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2178 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2178 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{init...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[193

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2182 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2182 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2182 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2182 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fina...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2182 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fina...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2182 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2182 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{fina...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[194

] [195

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2194 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2194 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2194 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2194 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2194 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2194 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2194 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[196

] [197

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2215 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2215 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2215 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2215 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2215 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2215 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2215 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[198

] [199

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2235 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2235 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2235 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2235 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2235 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2235 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2235 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[200

] [201

] [202

] [203

] [204


] [205

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2295 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2295 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2295 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2295 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{asm\...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2295 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{asm\...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2295 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2295 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{asm\...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[206

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2305 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2305 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2305 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2305 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{regi...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2305 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{regi...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2305 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2305 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{regi...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[207

] [208

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2319 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2319 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2319 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2319 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2319 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2319 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2319 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


Overfull \hbox (6.35995pt too wide) in paragraph at lines 2319--2322
[][] []\OT1/cmr/m/n/9 -nowrap[]-nowrap[][][][][]  []
 []

[209

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2325 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2325 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2325 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2325 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2325 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2325 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2325 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[210

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2336 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2336 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2336 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2336 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{subr...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2336 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{subr...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2336 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2336 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{subr...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[211

] [212

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2356 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2356 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2356 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2356 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{func...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2356 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{func...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2356 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2356 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{func...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[213

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2362 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2362 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2362 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2362 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{func...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2362 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{func...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2362 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2362 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{func...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[214

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2374 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2374 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2374 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2374 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{subr...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2374 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{subr...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2374 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2374 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{subr...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[215

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2385 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2385 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2385 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2385 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{form...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2385 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{form...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2385 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2385 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{form...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[216

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2390 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2390 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2390 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2390 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{para...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2390 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{para...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2390 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2390 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{para...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[217

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2400 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2400 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2400 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2400 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2400 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2400 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2400 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[218

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2409 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2409 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2409 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2409 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2409 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2409 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2409 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[219

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2424 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2424 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2424 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2424 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2424 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2424 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2424 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[220

] [221



] [222

] [223

] [224

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2520 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2520 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2520 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2520 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2520 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2520 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2520 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[225

] [226

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2560 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2560 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2560 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2560 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2560 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2560 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2560 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[227




]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2569 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2569 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2569 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2569 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{modi...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2569 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{modi...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2569 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2569 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{modi...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[228

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2582 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2582 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2582 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2582 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{call...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2582 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{call...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2582 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2582 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{call...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[229

] [230

] [231

] [232

] [233

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2663 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2663 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2663 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2663 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prog...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2663 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prog...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2663 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2663 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prog...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[234

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2672 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2672 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2672 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2672 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prog...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2672 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prog...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2672 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2672 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prog...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[235

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2678 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2678 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2678 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2678 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prog...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2678 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prog...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2678 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2678 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{prog...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[236

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2682 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2682 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2682 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2682 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{uses...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2682 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{uses...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2682 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2682 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{uses...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[237

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2687 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2687 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2687 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2687 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\end{syntd...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2687 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\end{syntd...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2687 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2687 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\end{syntd...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[238

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2691 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2691 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2691 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2691 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unit}
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2691 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unit}
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2691 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2691 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unit}
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[239

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2700 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2700 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2700 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2700 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unit...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2700 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unit...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2700 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2700 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{unit...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[240

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2707 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2707 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2707 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2707 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{inte...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2707 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{inte...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2707 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2707 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{inte...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[241

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2717 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2717 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2717 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2717 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2717 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2717 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2717 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[242

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2723 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2723 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2723 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2723 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{impl...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2723 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{impl...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2723 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2723 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{impl...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[243

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2730 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2730 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2730 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2730 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{init...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2730 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{init...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2730 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2730 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{init...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[244

] [245

] [246

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2774 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2774 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2774 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2774 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{bloc...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2774 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{bloc...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2774 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2774 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{bloc...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[247

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2778 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2778 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2778 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2778 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{decl...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2778 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{decl...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2778 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2778 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{decl...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[248

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2791 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2791 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2791 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2791 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{labe...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2791 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{labe...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2791 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2791 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{labe...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[249

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2801 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2801 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2801 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2801 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cons...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2801 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cons...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2801 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2801 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{cons...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[250

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2812 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2812 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2812 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2812 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{type...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2812 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{type...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2812 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2812 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{type...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[251

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2820 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2820 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2820 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2820 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{vari...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2820 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{vari...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2820 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2820 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{vari...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[252

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2828 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2828 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2828 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2828 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2828 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2828 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2828 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{proc...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[253

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2840 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2840 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2840 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2840 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{stat...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2840 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{stat...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2840 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2840 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{stat...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[254

] [255

] [256

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2896 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2896 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2896 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2896 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2896 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2896 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2896 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy
Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[257

]
Overfull \hbox (22.65392pt too wide) in paragraph at lines 2913--2914
[][][][][][][][][][][][][][][][][][][][][][] 
 []

[258

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2920 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2920 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2920 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2920 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{try\...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2920 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{try\...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2920 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2920 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{try\...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


Overfull \hbox (75.18863pt too wide) in paragraph at lines 2920--2926
[][] []\OT1/cmr/m/n/9 -nowrap[]-nowrap[][][][][][]  []
 []

[259

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2929 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2929 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2929 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2929 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{stat...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2929 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{stat...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2929 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2929 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{stat...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[260

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2934 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2934 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2934 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2934 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{exce...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2934 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{exce...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2934 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2934 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{exce...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[261

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2945 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2945 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2945 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2945 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\lit*{on} ...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2945 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\lit*{on} ...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2945 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2945 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\lit*{on} ...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[262

] [263

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2961 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2961 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2961 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2961 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{try ...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2961 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{try ...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2961 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2961 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{try ...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.


Overfull \hbox (5.35585pt too wide) in paragraph at lines 2961--2967
[][] []\OT1/cmr/m/n/9 -nowrap[]-nowrap[][][][][][]  []
 []

[264

]
! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2970 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\@ifundefined ...dafter \ifx \csname #1\endcsname 
                                                  \relax \expandafter \@firs...
l.2970 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: Environment tex2html\@uscore.nowrap undefined.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2970 \begin{syntdiag}\begin{tex2html_nowrap}
                                              \setlength{\sdmidskip}{.5em}\e...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

! Missing \endcsname inserted.
<to be read again> 
                   \protect 
l.2970 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{stat...
The control sequence marked <to be read again> should
not appear between \csname and \endcsname.

! Extra \endcsname.
\end #1->\csname end#1\endcsname 
                                 \@checkend {#1}\expandafter \endgroup \if@e...
l.2970 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{stat...
I'm ignoring this, since I wasn't doing a \csname.


! LaTeX Error: \begin{syntdiag} on input line 2970 ended by \end{tex2html\@usco
re.nowrap}.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              
                                                  
l.2970 ...h{\sdmidskip}{.5em}\end{tex2html_nowrap}
                                                  \sffamily\sloppy\synt{stat...

Your command was ignored.
Type  I <command> <return>  to replace it with another command,
or  <return>  to continue without it.

[265

] [266

]
Overfull \hbox (106.65477pt too wide) in paragraph at lines 3001--3002
[][][][][][][][][][][][][][][][][][][][][][][][] 
 []


Overfull \hbox (28.65398pt too wide) in paragraph at lines 3002--3003
[][][][][][][][][][][][][][][][][][][][][][][][] 
 []

[267

] [268

] [269

] [270

] [271

] [272

] [273

] [274

] [275

] (images.aux) )
(\end occurred inside a group at level 146) 
Here is how much of TeX's memory you used:
 945 strings out of 10906
 10421 string characters out of 72188
 67908 words of memory out of 262141
 3832 multiletter control sequences out of 9500
 5829 words of font info for 22 fonts, out of 150000 for 255
 14 hyphenation exceptions out of 607
 28i,14n,18p,279b,2932s stack positions out of 300i,40n,60p,3000b,4000s

Output written on images.dvi (275 pages, 157016 bytes).