; ; English messagefile for Free Pascal Compiler ; ; The letters until the _ indicate which type of message will be displayed, ; they are listed in order of importance, combinations may be made. The ; default when no type is listed is V_Default (=Error) ; F - Fatal Error ; E - Error ; W - Warning ; N - Note ; H - Hint ; I - Info ; L - Linenumber ; U - Used ; T - Tried ; M - Macro ; P - Procedure ; C - Conditional ; D - Debug ; Special cases: ; S - Stop the compiler after displaying the message ; ; Warning: When this file is loaded at runtime, the comments are also ; loaded to the memory ; I_$1 kB free L_$1 lines $2 kB free I_$1 stream kB used I_$1 EMS kB used I_Compiler: $1 I_Units are searched in: $1 D_Source OS: $1 I_Target OS: $1 U_Using executable path: $1 U_Using GCClib path: $1 I_$1 Lines compiled, $2 sec ; ; Scanner (also scanner part of the assembler) ; F_Unexpected end of file F_String exceeds line F_illegal character F_Syntax error $2 expected at col $1 U_Start reading includefile $1 W_Comment level $1 found N_$F directive (FAR) ignored N_Stack check is global under linux W_Illegal compiler switch W_This compiler switch has a global effect E_Illegal char constant F_Can't open file F_Can't open include file $1 E_Too many $ENDIFs or $ELSEs W_Records fields can be aligned to 1,2 or 4 bytes only E_$1 expected for $2 defined in line $3 E_Syntax error while parsing a conditional compiling expression E_Evaluating a conditional compiling expression W_Macro contents is cut after char 255 to evalute expression E_ENDIF without IF(N)DEF F_User defined: $1 E_User defined: $1 W_User defined: $1 N_User defined: $1 H_User defined: $1 I_User defined: $1 E_Keyword redefined as macro has no effect F_Macro buffer overflow while reading or expanding a macro W_Extension of macros exceeds a deep of 16, perhaps there is a recursive macro definition (crashes the compiler) E_compiler switches aren't allowed in (* ... *) styled comments D_Handling switch "$1" C_ENDIF $1 found C_IFDEF $1 found, $2 C_IFOPT $1 found, $2 C_IF $1 found, $2 C_IFNDEF $1 found, $2 C_ELSE $1 found, $2 C_Skipping until... I_Press to continue W_Unsupported switch $1 W_Illegal compiler directive $1 ; ; Parser ; E_Parser - Syntax Error W_Procedure type FAR ignored W_Procedure type NEAR ignored E_No DLL File specified E_Constructor name must be INIT E_Destructor name must be DONE E_Illegal open parameter E_Procedure type INLINE not supported W_Private methods shouldn't be VIRTUAL E_Constructor can't be private or protected E_Destructor can't be private or protected N_Class should have one destructor only E_Local class definitions are not allowed E_Anonym class definitions are not allowed E_Ordinal value expected E_Illegal parameter list E_overloaded identifier isn't a function identifier E_overloaded functions have the same parameter list E_function header doesn't match the forward declaration $1 N_only values can be jumped over in enumeration types N_Interface and implementation names are different ! E_function nesting > 31 E_range check error while evaluating constants E_pointer type expected E_class type expected E_duplicate case label E_typed constants of classes are not allowed E_functions variables of overloaded functions are not allowed E_string length must be a value from 1 to 255 W_use extended syntax of DISPOSE and NEW to generate instances of objects E_class identifier expected E_method identifier expected E_function header doesn't match any method of this class P_procedure/function $1 ($2) at line $3 E_Illegal floating point constant E_FAIL can be used in constructors only E_Destructors can't have parameters E_string types doesn't match, because of $V+ mode E_Only class methods can be referred with class references E_Only class methods can be accessed in class methods E_Constant and CASE types do not match E_The symbol can't be exported from a library W_A inherited method is hidden by $1 E_There is no method in an ancestor class to be overridden: $1 E_No member is provided to access property E_Illegal symbol for property access E_Cannot write a protected field of an object E_all overloaded methods must be virtual if one is virtual: $1 E_overloaded methods which are virtual must have the same return type: $1 E_EXPORT declared functions can't be nested E_methods can't be EXPORTed E_call by var parameters have to match exactly E_Class isn't a super class of the current class E_SELF is only allowed in methods E_methods can be only in other methods called direct with type identifier of the class E_Illegal use of ':' E_range check error in set constructor or duplicate set element E_Pointer to class expected E_Expression must be constructor call E_Expression must be destructor call E_Type conflict between set elements W_Using / will give a floating point result, use DIV instead to get an integer result E_Illegal order of record elements E_Expression type must by class or record type E_Functions with void return value can't return any value E_constructors and destructors must be methods W_Automatic type conversion from floating type to COMP which is an integer type E_Operator is not overloaded E_Variable or type indentifier expected E_Re-raise isn't possible there E_The extended syntax of new or dispose isn't allowed for a class E_Assembler incompatible with function return value E_Procedure overloading is switched off E_It is not possible to overload this operator (overload = instead) E_Comparative operator must return a boolean value E_Only virtual methods can be abstract F_Use of unsupported feature! E_The mix of CLASSES and OBJECTS isn't allowed W_Unknown procedure directive had to be ignored: $1 E_absolute can only be associated to ONE variable E_absolute can only be associated a var or const E_Abtract methods shouldn't have any definition (with function body) E_This overloaded function can't be local (must be exported) E_succ or pred on enums with assignments not possible W_Virtual methods are used without a constructor M_Macro defined: $1 M_Macro undefined: $1 M_Macro $1 set to $2 I_Compiling $1 D_Compiling $1 for the second time E_Array properties aren't allowed at this point E_No property found to override E_Only one default property is allowed, found inherited default property in class %1 E_The default property must be an array property E_Virtual constructors are only supported in class object model E_No default property available ; ; Symbol-table errors/warnings ; N_Local variable $1 doesn't seem to be initialized yet ! E_Identifier not found $1 F_Internal Error in SymTableStack() E_Duplicate identifier $1 E_Unknown identifier $1 E_Forward declaration not solved: $1 F_Identifier type already defined as type E_Type identifier expected E_Type mismatch E_Error in type defenition E_Type identifier not defined E_Only static variables can be used in static methods or outside methods E_Invalid call to tvarsym.mangledname() F_record or class type expected E_To generate an instance of a class or an object with an abtract method isn't allowed E_Label not defined $1 E_Illegal label declaration E_GOTO und LABEL are not supported (use command line switch -Sg) E_Label not found E_identifier isn't a label E_label already defined E_illegal type declaration of set elements E_Forward class definition not resolved $1 H_Identifier not used $1, declared in line $2 E_Set elements are not compatible E_Set type expected W_Function result does not seem to be set E_Unknown field identifier N_Local variable does not seem to be initialized: $1 E_identifier idents no member ; ; Codegenerator ; E_BREAK not allowed E_CONTINUE not allowed E_Expression too complicated - FPU stack overflow E_Illegal expression E_Invalid integer E_Illegal qualifier E_High range limit < low range limit E_Illegal counter variable E_Can't determine which overloaded function to call E_Parameter list size exceeds 65535 bytes E_Illegal type conversion E_File types must be var parameters E_The use of a far pointer isn't allowed there E_illegal call by reference parameters E_EXPORT declared functions can't be called W_Possible illegal call of constructor or destructor (doesn't match to this context) N_Inefficient code W_unreachable code E_procedure call with stackframe ESP/SP E_Abstract methods can't be called directly F_Internal Error in getfloatreg(), allocation failure F_Unknown float type F_SecondVecn() base defined twice F_Extended cg68k not supported F_32-bit unsigned not supported in MC68000 mode F_Internal Error in secondinline() D_Register $1 weight $2 $3 E_Stack limit excedeed in local routine D_Stack frame is omited ; ; Assembler parsers ; F_Divide by zero in asm evaluator F_Evaluator stack overflow F_Evaluator stack underflow F_Invalid numeric format in asm evaluator F_Invalid Operator in asm evaluator F_Unknown error in asm evaluator W_Invalid numeric value E_escape sequence ignored: $1 E_Asm syntax error - Prefix not found E_Asm syntax error - Trying to add more than one prefix E_Asm syntax error - Opcode not found E_Invalid symbol reference W_Calling an overload function in an asm E_Constant value out of bounds E_Non-label pattern contains @ E_Invalid Operand: $1 W_Override operator not supported E_Error in binary constant: $1 E_Error in octal constant: $1 E_Error in hexadecimal constant: $1 E_Error in integer constant: $1 E_Invalid labeled opcode F_Internal error in Findtype() E_Invalid size for MOVSX/MOVZX E_16-bit base in 32-bit segment E_16-bit index in 32-bit segment E_Invalid Opcode E_Constant reference not allowed W_Fwait can cause emulation problems with emu387 E_Invalid combination of opcode and operands W_Opcode $1 not in table, operands not checked F_Internal Error in ConcatOpcode() E_Invalid size in reference E_Invalid middle sized operand E_Invalid three operand opcode E_Assembler syntax error E_Invalid operand type E_Segment overrides not supported E_Invalid constant symbol $1 F_Internal Errror converting binary F_Internal Errror converting hexadecimal F_Internal Errror converting octal E_Invalid constant expression E_Unknown identifier: $1 E_Trying to define an index register more than once E_Invalid field specifier F_Internal Error in BuildScaling() E_Invalid scaling factor E_Invalid scaling value E_Scaling value only allowed with index E_Invalid assembler syntax. No ref with brackets) E_Expressions of the form [sreg:reg...] are currently not supported E_Trying to define a segment register twice E_Trying to define a base register twice E_Trying to use a negative index register E_Asm syntax error - error in reference E_Local symbols not allowed as references E_Invalid operand in bracket expression E_Invalid symbol name: $1 E_Invalid Reference syntax E_Invalid string as opcode operand: $1 W_@CODE and @DATA not supported E_Null label references are not allowed E_Cannot use SELF outside a method E_Asm syntax error - Should start with bracket E_Asm syntax error - register: $1 E_SEG and OFFSET not supported E_Asm syntax error - in opcode operand E_Invalid String expression E_Constant expression out of bounds F_Internal Error in BuildConstant() W_A repeat prefix and a segment override on <= i386 may result in errors if an interrupt occurs E_Invalid or missing opcode E_Invalid combination of prefix and opcode: $1 E_Invalid combination of override and opcode: $1 E_Too many operands on line E_Duplicate local symbol: $1 E_Unknown label identifer: $1 E_Assemble node syntax error E_Undefined local symbol: $1 D_Starting intel styled assembler parsing... D_Finished intel styled assembler parsing... E_Not a directive or local symbol: $1 E_/ at beginning of line not allowed E_NOR not supported E_Invalid floating point register name W_Modulo not supported E_Invalid floating point constant: $1 E_Size suffix and destination register do not match E_Internal error in ConcatLabeledInstr() W_Floating point binary representation ignored W_Floating point hexadecimal representation ignored W_Floating point octal representation ignored E_Invalid real constant expression E_Parenthesis are not allowed E_Invalid Reference E_Cannot use __SELF outside a method E_Cannot use __OLDEBP outside a nested procedure W_Identifier $1 supposed external E_Invalid segment override expression E_Strings not allowed as constants D_Starting AT&T styled assembler parsing... D_Finished AT&T styled assembler parsing... E_Switching sections is not allowed in an assembler block E_Invalid global definition E_Line separator expected W_globl not supported W_align not supported W_lcomm not supported W_comm not supported E_Invalid local common definition E_Invalid global common definition E_local symbol: $1 not found inside asm statement E_assembler code not returned to text F_internal error in BuildReference() E_invalid opcode size W_NEAR ignored W_FAR ignored D_Creating inline asm lookup tables W_Using a defined name as a local label F_internal error in HandleExtend() E_Invalid character: < E_Invalid character: > E_Unsupported opcode E_Increment and Decrement mode not allowed together E_Invalid Register list in movem/fmovem E_Invalid Register list for opcode E_68020+ mode required to assemble D_Starting Motorola styled assembler parsing... D_Finished Motorola styled assembler parsing... W_XDEF not supported W_Functions with void return value can't return any value in asm code E_Invalid suffix for intel assembler E_Extended not supported in this mode E_Comp not supported in this mode W_You need GNU as version >= 2.81 to compile this MMX code ; ; Exec, calls to assembler, linker, binder, libraries ; I_Assembling (pipe) $1 E_Can't create assember file $1 W_Assembler $1 not found, switching to external assembling U_Using assembler: $1 W_Error while assembling W_Can't call the assembler, switching to external assembling I_Assembling $1 W_Linker $1 not found, switching to external linking U_Using linker: $1 E_File $1 not found, Linking may fail !! W_Error while linking W_Can't call the linker, switching to external linking I_Linking $1 W_binder not found, switching to external binding W_ar not found, switching to external ar E_Dynamic Libraries not supported I_Closing script $1 ; ; Unit handling, PPU file ; U_PPU Loading $1 D_PPU Time: $1 D_PPU File too short D_PPU Invalid Header (no PPU at the begin) D_PPU Invalid Version $1 D_PPU Flags: $1 D_PPU Crc: $1 T_PPU Source: $1 D_objectfile and assemblerfile are older than ppufile D_objectfile is older than assemblerfile T_Unitsearch: $1 U_Writing $1 F_Can't Write PPU-File F_reading PPU-File F_Invalid PPU-File entry: $1 F_PPU Dbx count problem E_Illegal unit name: $1 F_Too much units F_Circular unit reference F_Can't compile unit $1, no sources available W_Compiling the system unit requires the -Us switch E_$1 Errors F_There were errors compiling module, compilation stopped