;************************************************************************* ;** Locale constructor V40.21 ViNCEd prefs part ** ;** ** ;** This is a constructor/shell script for CreateCatalog. Please read ** ;** the instructions below carefully. ** ;************************************************************************* ; ; This file has two purposes: ; ; First it acts as a shell script that must be "execute"d to ; build the catalog with one command ; Second, it tells CreateCatalog how to build the ; catalog. Thus, this file gets a) executed by the shell ; and b) is parsed by CreateCatalog. This is possible due to ; the special syntax of CreateCatalog. ; All lines starting with a semicolon or a blank space are comments ; for CreateCatalog. Thus these lines and the lines that act as ; a shell script are ignored by the catalog builder: The former ; because they have the semicolon, the later because I added a ; blank space at the beginning. ; ; Shell script part of the catalog builder: ; ; no assembler is needed for this part. This time the complete job can ; be done by CreateCatalog, and the strings of the locale are in ; THIS file. ; ; The next line starts the catalog builder: ; The arguments are: This file (instructions how to build) ; the output file (will be put to RAM:) ; the language: Please change "deutsch" to ; your language, i.e. "italiano" or "français". ; and the version/revision of the catalog. ; Here version 40.21 (40 is internal for release 3) ; ;*************** Edit this line below ************************************* vl:bin/CreateCatalog vl:prefs.construct ram:VNC.prefs.catalog deutsch 40 21 ; ^^^^^ ; This string must be ; adjusted ! quit ; ; End of the shell script. quit is used to prevent the shell from parsing the ; lines below. ; ; Here we use another set of CreateCatalog commands. ; The '#' command sets the string counter to a specific value. ; There's no need to change these lines. ; ; The 'lines contain the actual strings that replace the english (default) strings ; The lines starting with a semicolon are again comments and ignored ; by the catalog builder. Thus you ONLY NEED TO EDIT the lines starting with ; the apostrophe '. ; Please note that unlike in the "sys" part of the localization, the ; reverse apostrophe ` IS NOT USED HERE! ; ; Please note that you MUST surround these strings with an additional pair ; of double quotes if you want to include leading/following blank spaces. ; The usual C style syntax is used for special charaters, like ; \r for carriage return \n for newline ; \t for TAB \b for backspace ; \\ for the backslash itself. It is the same syntax that is used in the ; ViNCEd macros, so propably read this section of the guide. ; ; ; Since this is taken from the german localization, I put the original ; english strings ON TOP of the german ones, plus some information ; when this string gets printed/displayed. ; ;*************************************************************************** ;Strings of the startup-segment ;*************************************************************************** #1 ;unkown command. Printed if you pass an illegal argument to SetVNC 'unbekanntes Kommando. ;required subcommand missing Printed if a subcommand needs a sub argument that is missing. 'benötigtes Teilkommando fehlt. ;unknown subcommand Printed if the parser encountered a sub command (like the FROM to LOAD or the TO for SAVE) that it does not understand 'unbekanntes Teilkommando. ;required argument missing Printing if a command takes an argument that is not present 'benötigtes Argument fehlt. ;boolean value neither ON nor OFF. The parser expected an ON or OFF as argument. 'boolscher Wert weder ON noch OFF. ;invalid numeric value. The parser expected a number. The one supplied was invalid 'ungültiger Zahlenwert. ;out of memory SetVNC has not enough memory. 'Speicher fehlt. ;Failed parsing "%s" : %s \n\r Printed if the parsing of an arugment failed. ;The first %s is substituted with the argument name, the second with the failure type, from above. ;The \n\r code is a newline command. ;(Here both, newline plus line feed since someone may have turned ViNCEd's ; auto CR off) 'Fehler beim Bearbeiten von "%s" : %s\n\r ;SetVNC failure: Need AT LEAST vnc.library version 40.00. Printed if SetVNC failed to open the vnc.library 'SetVNC Fehler: Es wird MINDESTENS die Version 40.00 der vnc.library benötigt.\n\r ;SetVNC failure: Can't open needed libraries. Printed if some generic libs are missing (asl/dos/gfx/intuition) 'SetVNC Fehler: Benötigte Bibliotheken können nicht geöffnet werden.\n\r ;SetVNC failure: Need a ViNCEd stream as output handle. Printed if SetVNC found a non-VINCEd stream, i.e. hasn't been called from ViNCEd. 'SetVNC Fehler: Ein ViNCEd-Stream wird als Ausgabekanal benötigt.\n\r ;"DOS failed " A generic failure message if some DOS function returned an error '"DOS Fehler " ;%s: error code %ld.\n\r A generic error code if no standard fail message of the DOS could be found. ; %s is substituted with the text above, and %ld is the DOS error number. '%s: Fehler-Code %ld.\n\r ;"Usage: SetVNC " The title of the text that is printed if you specify "?" as argument '"Aufruf: SetVNC " ;" O.K. " This text is put into the fail requester (it has only one button) '" O.K. " ;*************************************************************************** ;Strings of the prefs-loader ;*************************************************************************** ; ;these strings are printed if the loading/saving of some prefs can't be done ; #16 ;"SetVNC failure: Unable to save preferences as " Printed if SetVNC failed to save the prefs as a file. ;The actual file name is put behind this text. '"SetVNC-Fehler: Kann Voreinstellungen nicht abspeichern unter \n\r" ;SetVNC failure: No memory for preferences. Due to a lack of memory ViNCed can't build them 'SetVNC-Fehler: Speicher für die Voreinstellungen fehlt.\n\r ;SetVNC failure: Can't get preferences from active window. SetVNC can't load the prefs of the window it was invoked in. 'SetVNC-Fehler: Voreinstellungen können nicht vom Fenster geholt werden.\n\r ;SetVNC failure: Can't get global preferences. SetVNC can't load the global ("Used") prefs. 'SetVNC-Fehler: Die globalen Voreinstellungen können nicht geholt werden.\n\r ;SetVNC failure: Can't get default preferences. The defaults were unavailable. 'SetVNC-Fehler: Die Standard-Voreinstellungen können nicht geholt werden.\n\r ;"SetVNC failure: Can't get preferences from file " SetVNC failed to load the prefs from a given file. ;The actual file name is printed behind this text ;SetVNC failure: Can't get preferences from file SetVNC failed to load a given prefs file. ;The file name is printed behind this text '"SetVNC-Fehler: Kann die Voreinstellungen nicht Lesen von der Datei " ;SetVNC failure: Can't get last saved preferences. SetVNC failed to load the prefs beeing saved as global prefs. 'SetVNC-Fehler: Die zuletzt gespeicherten Voreinstellungen können nicht gelesen werden.\n\r ;SetVNC failure: Can't construct macro list. The list of the macros can't be setup 'SetVNC-Fehler: Kann die Makro-Liste nicht erstellen.\n\r ;SetVNC failure: Can't build macros from list. The list of the macros can't be installed into the prefs. 'SetVNC-Fehler: Kann die Makro-Liste nicht in die Voreinstellungen einbauen.\n\r ;SetVNC failure: Can't install preferences into active window. The window SetVNC was invoked in did not accept the new prefs. 'SetVNC-Fehler: Kann die Voreinstellungen des aktiven Fensters nicht ändern.\n\r ;SetVNC failure: Can't install preferences into library base. The prefs have been rejected as global ("Used") prefs. 'SetVNC-Fehler: Kann die Voreinstellungen der Bibliothek nicht ändern.\n\r ;*************************************************************************** ;Strings of the shell-commands ;*************************************************************************** ; ;Strings used for one of the many in-place actions. ; #32 ;TabHook installed. The TAB expansion has been turned on. ;The notation "TABHook" is a bit antique and due to some earlier release ;of ViNCEd, where this feature was done by an external "Hook" program. 'TabHook ist installiert.\n\r ;TabHook removed. The TAB expansion has been turned off. 'TabHook wurde entfernt.\n\r ;"The TabHook is no longer driven by an external supervisor.\n\rThe "hook" is now removed and the command was ignored.\n\r ;This text explains that the TAB expansion has been removed, and that this ;feature is now internal - no external process is needed. 'Der TabHook wird nicht mehr von einem externen Prozeß gesteuert.\n\rDer "TabHook" wurde entfernt und das Kommando ignoriert.\n\r ;The specified number of lines is invalid. The size of a buffer given to SetVNC is too large or too small. 'Die angegebene Zeilenanzahl ist außerhalb des erlaubten Bereiches.\n\r ;The specified time interval is invalid. The time (blink speed/refresh interval etc..) is too short or too long. 'Das angegebene Zeitintervall ist außerhalb des erlaubten Bereiches.\n\r ;*** The next ones are new to 40.12.... ;The specified monitor does not exist. The monitor name was not found in the monitor data base. 'Der angegebene Monitor existiert nicht. ;The 1.2/1.3 workbench does not support monitor names.\n\rUse MONITORID instead.\n\r ;SetVNC complains of a MONITOR argument which is useless with WB 1.2/1.3 since the monitor data ;base was introduced in 2.0 'Die 1.2/1.3 Workbench unterstützt keine Monitornamen.\n\rVerwenden Sie stattdessen MONITORID.\n\r ;The specified qualifier is invalid.\n\r ;The user gave a qualifier for the icon drop modifier which is useless (like caps or the "number pad" qualifier). 'Der angegebene Qualifier ist ungültig.\n\r ;*************************************************************************** ;Strings of the mounter ;*************************************************************************** ; ; This string is used by the "MOUNT" command on failure ; #64 ;"Can't mount ViNCEd as " Printed if mount failed. ;The device name which should be replaced by VNC: (usually CON:) is ;printed BEHIND this text. '"ViNCEd kann nicht gemountet werden als " ;*************************************************************************** ;Strings for the job control functions fg,bg ;*************************************************************************** ; ; #72 ;SetVNC failure : Nothing found to put in foreground instead.\n\r SetVNC's bg failed since ;there's no process that can't be put in foreground to replace the current one. 'SetVNC-Fehler: Es fehlt ein Prozeß, der stattdessen in den\n\rVordergrund geschickt werden kann.\n\r ;SetVNC failure : Can't send this process to foreground.\n\r The process can't be set ;to foreground for some reason. 'SetVNC-Fehler: Dieser Prozeß kann nicht in den Vordergrund geschickt werden.\n\r ;SetVNC failure : CLI process not found.\n\r The CLI number of the process ;to set to foreground does not exist. 'SetVNC-Fehler: Der angegebene CLI-Prozeß existiert nicht.\n\r ;SetVNC failure : This process is not under my control.\n\r The process corresponding to ;the given CLI number exists, but was not under control of the ViNCEd process in the window ;SetVNC was invoked in - propably it is not under control of ViNCEd at all, or propably it runs ;in a different window. 'SetVNC-Fehler: Dieser Prozeß ist nicht unter meiner Kontrolle.\n\r ;*************************************************************************** ;Strings for the guide-loading module ;*************************************************************************** ; ; #80 ;SetVNC failure: Can't load help browser.\n\r The help program (usually MultiView) ;can't been loaded. Propably it is missing or its location (found in the "default tool") is ;wrong 'SetVNC-Fehler: Kann den Hilfstext-Browser nicht laden.\n\r ;SetVNC failure: Can't find help database.\n\r SetVNC was unable to locate the ;VNC.guide. It's location is kept in the tooltypes of the SetVNC program. 'SetVNC-Fehler: Kann den Hilfetext nicht finden.\n\r ;*************************************************************************** ;Strings used by the prefs editor ;*************************************************************************** ; ; ; #128 ;SetVNC failure : Can't install the prefs requester.\n\r ;Printed if SetVNC failed to build its requester into the window. 'SetVNC-Fehler: Der Voreinstellungs-Requester\n\rkann nicht erstellt werden.\n\r ;SetVNC failure : Can't build requester page.\n\r ;Printed if SetVNC failed to draw a "page" of the prefs, i.e. construction ;of the gadgets failed. 'SetVNC-Fehler: Die Voreinstellungs-Seite\n\rkann nicht aufgebaut werden.\n\r ;SetVNC failure : Can't write string back into prefs. ;Printed if some of the strings (usually the macros) can't be re-installed ;to the prefs. 'SetVNC-Fehler: Die Änderung kann nicht in die\n\rVoreinstellungen zurückgeschrieben werden.\n\r ;Please locate guide : ;This is the title of the file requester that appears to choose the VNC.Guide 'Bitte die Hilfe-Datei auswählen : ;Please locate the guide path\n\rin the "System" menu.\n\r ;The contents of a failure requester in case the user requested for help, ;but SetVNC does not yet know the location of the VNC.guide. 'Bitte zuerst die Hilfe-Datei\n\rim "System"-Menü einstellen.\n\r ;SetVNC failure : Out of chip mem for images.\n\r ;Chip memory failed for the magnification of the title picture ;(ViNCEd-logo & the Elf & THOR-Software text) 'SetVNC-Fehler: Chip-Speicher für die Bilder fehlt.\n\r ;The next ones are new to 40.11 ;The font name is invalid.\n\rPlease specify it as .\n\r ;SetVNC complains about an invalid font name in the font string gadget ;of the window page. 'Der Schriftname ist ungültig.\n\rBitte geben Sie ihn als . an.\n\r ;The specified font can't be found.\n\r ;SetVNC can't find the font the user requested. 'Die angegebene Schrift wurde nicht gefunden.\n\r ;The specified monitor does not exist.\n\r ;The monitor id in the monitor string gadget 'Der angegebene Monitor wurde nicht gefunden.\n\r ;ASL.library V37 is missing.\n\r ;SetVNC needs ASL 37.xx for the font requester. 'ASL.library V37 fehlt.\n\r ;ASL.library V38 needed.\n\r ;The V38 version of ASL must be present for the screen mode requester. 'ASL.library V38 wird benötigt.\n\r ;Select default font: ;The title of the font requester. 'Standardschrift wählen: ;Default monitor ID: ;The title of the screen mode requester 'Standardmonitor wählen: ;Can't create font requester.\n\r ;ASL returned a failure building the font requester, for what reason ever. 'Der Schriftrequester kann\n\rnicht aufgebaut werden.\n\r ;Can't create screen mode requester.\n\r ;ASL failed to construct the screen mode requester. 'Der Monitorrequester kann\n\rnicht aufgebaut werden.\n\r ;*************************************************************************** ;The page names ;*************************************************************************** ; ; The next ones are the page names that are printed in the ; top row of each page. PLEASE KEEP THEM VERY SHORT, since the ; room is limited. ; WARNING: One of the names changed in 40.30: The buffers page is ; now called "Window" ; ; ;Page-Names #192 ;About Title of the page that contains the logo. 'Über ;Macros The macros (for the menu) setup pages 'Makros ;Buttons The buttons (for the titlebar) setup pages 'Knöpfe ;Edit Lots of flags for the editor behaiviour 'Edit ;Shell Lots of stuff for the shell:TAB Expansion plus some more 'Shell ;Window The page to setup window related stuff, and custom screens (new to 40.30) 'Fenster ;Timing Blink speeds, rebuild delay setup 'Timing ;System A lot of internal system settings (system macros & flags) 'System ;*************************************************************************** ;Strings used by the on-line help ;*************************************************************************** ; ; These strings are used whenever the user requested help thru one ; of the "HELP" buttons on the pages and the help failed for some ; reason. They are put into requesters with an "O.K." button. ; The text for the button is in one of the strings on top ; ; #208 ;SetVNC failure : Need amigaguide.library V34 or better.\n\r ;The amigaguide.library which is used to display the VNC.guide is ;missing 'SetVNC-Fehler: Es wird die amigaguide.library\n\rVersion 34 oder besser benötigt.\n\r ;SetVNC failure : Can't open the specified guide file.\n\r ;amigaguide.library failed to open the requested guide. Propably it is ;missing, or the location (setup by in the system page) is not correct, ;or maybe it's the wrong file 'SetVNC-Fehler: Die angegebene Hilfe-Datei kann nicht geöffnet werden.\n\r ;SetVNC failure : Can't find the requested help node.\n\r ;The help node requested is not in the guide. Propably the guide ;must be updated, since I added some nodes to it in the past... 'SetVNC-Fehler: Der benötigte Hilfe-Text fehlt.\n\r ;"SetVNC failure : " ;Some error condition has occured. The string amigaguide returned as ;failure code is appended to this one and forms the complete fail ;message. '"SetVNC-Fehler: " ; ;Unknown amigaguide failure ;This one gets appended to the string on top if amigaguide did not ;return a readable failure code 'Unbekannter AmigaGuide-Fehler ;*************************************************************************** ;Strings used by the buffer load/save module. New to 40.35 ;*************************************************************************** ; ; These strings are used by the buffer saving/loading routine ; i.e. subcommands SetVNC get / put ; #224 ;***Break\n\r ;Printed if the loading gets aborted '*** Abbruch\n\r ;Some obsolete strings follow. They are partially replaced ;by strings in the ViNCEd module since bufferI/O is now ;a part of the library, not of SetVNC. ;SetVNC calls the proper library functions, that's all! ; ;*** this one is obsolete *** ;SetVNC failed writing the line buffer.\n\r ;A generic IO error generated if something went wrong while writing ;some part of the buffer lines, either the history or the screen. 'SetVNC kann den Zeilenbuffer nicht schreiben.\n\r ;*** this one is obsolete *** ;SetVNC failed reading the line buffer.\n\r ;Another generic error if something went wrong while reading a line ;buffer, either the history or the screen. 'SetVNC kann den Zeilenbuffer nicht lesen.\n\r ;*** this one is obsolete ;SetVNC failed to open %s\n\r ;This error is generated if SetVNC failed to open the buffer file, i.e. ;can't create a line buffer file for writing or failed to open the buffer ;file for reading. %s is replaced by the name of the file. 'SetVNC kann %s nicht öffnen.\n\r ;******* New strings in here! ; ;This text is printed if the new SetVNC release is ;used with an obsolete library that does not provide the ;buffer I/O functions. Please note the escaped line feeds ;at the end! ;You are using an obsolete version of ViNCEd!\ ;\rBuffer I/O operations have to be supported by the library,\ ;\rplease upgrade to 43.50 or better.\n\r 'Sie benutzen eine veraltete ViNCEd-Version!\ \rDie Lade- und Speicherfunktionen müssen nun von der\ \rBibliothek übernommen werden, bitte besorgen Sie\ \rein Update auf 43.50 oder besser.\n\r ; ; ;The next strings are inserted as names of the failure operation ;this is the first "%s" in the text below. ; ;The first text is shown if the history can't be saved: ;ViNCed failed to... (text goes here) ;save the history 'die History abspeichern ; ;Same for the window contents: ;save the line buffer 'den Fensterinhalt speichern ; ;Loading the history failed here ;load the history 'die History einladen ; ;Loading the screen failed ;load the line buffer 'den Fensterinhalt laden ; ; ;This is the first failure requester body. The first "%s" here is replaced ;by one of the strings shown above, related to which operation failed. ;The second "%s" is the file name. ;Try to formulate this in a way that you get a complete sentence that ;makes some sense! Note the escaped line feeds at the end! ;SetVNC failed to %s.\ ;\rOut of memory while processing %s.\n\r 'SetVNC konnte nicht %s,\ \res fehlt Speicher.\n\r ; ; ;The next one is printed if a file can't be opened. The first "%s" is ;replaced with one of the four operation strings above, the second ;"%s" is the file name. ;SetVNC failed to %s:\ ;\rCan't open %s.\n\r 'SetVNC konnte nicht %s:\ \r%s kann nicht geöffnet werden.\n\r ; ; ;The same, but the failure reason is this time located in a ;read error ;SetVNC failed to %s:\ ;\rCan't read %s.\n\r 'SetVNC konnte nicht %s:\ \r%s kann nicht gelesen werden.\n\r ; ; ;Again the same, but writing failed: ;SetVNC failed to %s: Can't write %s.\n\r 'SetVNC konnte nicht %s:\ \r%s kann nicht geschrieben werden.\n\r ; ; ;And last but not least: A generic text if the failure ;condition is unkown. A DOS error code is appended. ;SetVNC failed to %s:\n\r 'SetVNC konnte nicht %s:\n\r ; ; ; ; ;*************************************************************************** ;Strings used in the pages ;*************************************************************************** ; ; the next strings are put into the pages, mostly as ; gadget names. So please try if the strings are "short enough" to ; fit into the buttons. The spacing is *worst* for fixed-width fonts ; but the actual point size does not matter since everything gets ; rescaled automagically. Proportional fonts tend to give a ; more relaxed spacing, so you should try this with topaz.8 ; although this font is usually "too tiny". ; ;*************************************************************************** ;Strings common to all pages: The bottom bar ;*************************************************************************** ; ;!!! Warning: The "Save" string has moved TO THE END of this collection!!! ; #257 ;Use Use prefs globally 'Benutzen ;To Window Try in window SetVNC was called from only. 'im Fenster ;Cancel Abort SetVNC without saving 'Abbrechen ;*************************************************************************** ;Buttons in the about page ;*************************************************************************** ; ; ;Last Saved Reload prefs from default location 'Zuvor gsp. ;Last Used Reload global prefs 'Benutzten ;Window Reload prefs from the window SetVNC was invoked from. 'Fenster ;Default Load defaults. 'Standard ;Restore settings from: This text is put in front of the button above. Propably this ;together with the gadget text should form a sentence. 'Voreinstellungen einlesen vom : ;About Loads the main node of the VNC.guide. 'Über... ;*************************************************************************** ;The save button was moved to this place... ;*************************************************************************** ;Save Save prefs to default location (ENVARC: & ENV:) 'Speichern ;*************************************************************************** ;Buttons in the macros pages ;*************************************************************************** ; ; ; #272 ;ViNCEd Macros Page 1 (of 2) : The page title, giving the name ;of the page, the number if there's more than one page for the topic ;plus the total number of pages for this topic. 'ViNCEd Makros Seite 1 (von 2) : ;Help... Common to all pages: The HELP button ;it loads the VNC.Guide and displays the node for the page this button is on. 'Hilfe... ;2nd Page » The link to the other page. This ;button is also very common. ;New in 3.53: These strings are no longer needed. Leaving them ;empty is fine as well... '2. Seite » ;Macro 0 These gadgets just count thru the ;number of macros. 0-4 are on the first page 'Makro 0 ;Macro 1 'Makro 1 ;Macro 2 'Makro 2 ;Macro 3 'Makro 3 ;Macro 4 'Makro 4 ;*************************************************************************** ; ;Second macro page ; #288 ;ViNCEd Macros Page 2 (of 2) : 'ViNCEd Makros Seite 2 (von 2) : ;Help 'Hilfe... ;« 1st Page ;Link back. Note that the arrow points ;to the opposide direction. '« 1. Seite ;Macro 5 'Makro 5 ;Macro 6 'Makro 6 ;Macro 7 'Makro 7 ;Macro 8 'Makro 8 ;Macro 9 'Makro 9 ;*************************************************************************** ;Buttons in the buttons page ;*************************************************************************** ; ;There's only one page, so no link buttons... ; #304 ;ViNCEd Button Page : 'ViNCEd Knöpfe : ;Help... 'Hilfe... ;Button title :" ;Put in front of the gadget that contains the name of a button, i.e. what ;gets printed in the title bar. 'Titel : ;Remove ;A button to remove a button from the list 'Entfernen ;Insert ;A button to insert a new button between others 'Einfügen ;Command : ;The text of the macro. This one will be expanded and executed by, ;well usually the shell. 'Kommando : ;« Prev ;A button to go backwards (towards the first) button in the list '« Zurück ;Next » ;A button to go forwards (towards the last) button 'Vorwärts » ;The next one is new to 40.30: ;"Key : F%ld " ;This one expands into the key related to the current button in the ;window. "%ld" is replaced by a number from 1 to 10. Please note the ;space at the end, which is needed! '"Taste : F%ld " ;*************************************************************************** ;Buttons in the edit pages ;*************************************************************************** ; ;These strings are used in the four pages for editor features. ; ;A fourth page has been added in 40.33 which is now at the end of this ;file. ;A fifth page was added in 40.41! ; ; #320 ;ViNCEd Edit Page 1 (of 5) : The title 'ViNCEd Editor Seite 1 (von 5) : ;Help... 'Hilfe... ;2nd Page » '2. Seite » ;Unrestricted cursor movement ;Same as the "DOS Cursor mode" in the menu. Used to move the cursor ;like the DOS, without restrictions. For example, backspace does not ;stop on the shell prompt if this is turned on. 'Uneingeschränkte Cursorbewegung ;CR inserts below at start of line ;What happends if return gets pressed at the beginning of a line ;If this is turned on, a RETURN key press is not special at the beginning of ;a line. If turned off, it will insert a line on top instead of below. 'CR fügt am Zeilenanfang unterhalb ein ;TAB moves, no insertion ;Determinates the operation of the TAB key 'TAB bewegt den Cursor und fügt nicht ein ;Overwrite Text ;Insertion mode (off) vs. overwrite mode (on): 'Text überschreiben ;History buffer wraps around ;The operation of the command history and of the TAB expansion. If turned ;on, and you reached one end of the history / list of possible expansions, ;the buffer will wrap around, i.e. starts again at the beginning 'Eingabebuffer ist zyklisch ;*************************************************************************** ; ; #336 ;ViNCEd Edit Page 2 (of 5) : 'ViNCEd Editor Seite 2 (von 5) : ;Help... 'Hilfe... ;3rd Page » '3. Seite » ;Don't write printed text into clipboard ;Like "Cut inputs only" in the menu: Put only user input into the clipboard 'Gedruckten Text nicht in die Zwischenablage ;Implicit copy after text marking ;Copy the marked area immediately into the clipboard, don't wait for a copy 'Markierten Text sofort in die Zwischenablage ;Swap ALT-cursor and cursor keys ;History movement by cursor keys, cursor movement by ALT+Cursor if on 'ALT-Cursortasten mit Cursortasten vertauschen ;Underline cursor ;instead of a block cursor 'Unterstrich-Cursor ;Blinking cursor ;make the cursor blink. Speed is setup in the timing page 'Blinkender Cursor ;*************************************************************************** ; ; #344 ;ViNCEd Edit Page 3 (of 5) : 'ViNCEd Editor Seite 3 (von 5) : ;Help 'Hilfe... ;4th Page » '4. Seite » ;XTerm cursor mode ;The cursor gets frozen and does not move if you scroll the window or ;mark a block 'Cursorbewegung wie in XTerm/CON: ;The next two are new in 40.30: ;Disable middle mouse button ;Use the MMB for other programs, not for unix like clipboard control ;The replacement Ctrl+Left works, however 'Mittlere Maustaste ignorieren ;Disable BS at start of line ;Do not join lines if BS is pressed at the start of the line. Ignore ;it instead! 'Backspace am Zeilenanfang ausschalten ;Extensions made to 40.33: ;ANSI colors as default ;Use the ANSI coloring sheme by default. Can be enabled by hand with the ;CSI >?8h sequence, see the guide for more on that. 'ANSI-Farben als Voreinstellung ;Don't scroll into the border ;Enable hard window scroll borders. Prevent the cursor from goining into ;"blank" lines and stop scrolling at these boundaries. 'Nicht in den Rand scrollen ;*************************************************************************** ;There's also a fourth editor page which has been added later on. It is ;for that reason below in this file... ;*************************************************************************** ;Buttons in the shell page ;*************************************************************************** ; ;These pages setup functions related to the shell mode of ViNCEd ;like TAB expansion and requesters ;Please note that in 40.30 a fourth one was added to the shell pages, ;so the titles changed a bit... ;A fifth page was added to 40.41... ; ; #352 ;ViNCEd Shell Page 1 (of 5) : 'ViNCEd Shell Seite 1 (von 5) : ;Help... 'Hilfe... ;2nd Page » '2. Seite » ;Call macro to close window ;Like "Smart Close" in the menu 'Makro zum Fensterschließen aufrufen ;Prevent accidental window closing ;Like "Safer Close" in the menu: Do not close if more than one process ;posesses the window 'Versehentliches Fensterschließen verhindern ;Don't send EOF until everybody waits ;A very technical setting, determinates what should happen if more than ;one process is in the window and the user closes the window 'EOF nur senden, falls alle Prozesse warten ;Don't add close gadget by default ;If turned on, you must explicitly ask for a CLOSE gadget in the path to ;get one. By default (since 1.00), ViNCEd windows come always with a ;close gadget. 'Close-Gadget nur auf Anfrage erzeugen ;Don't add iconify gadget by default ;If turned on, you must ask for a iconify gadget. The default is that all ;windows that appear on the workbench or that have the FALLBACK option ;turned on will get an iconifier. 'Iconifizierungs-Gadget nur auf Anfrage ;************************************************************************** ; ; #368 ;ViNCEd Shell Page 2 (of 5) : 'ViNCEd Shell Seite 2 (von 5) : ;Help... 'Hilfe... ;3rd Page » '3. Seite » ;TAB filename expansion ;Use TAB instead of Ctrl+TAB in the SHELL mode for file name expansion 'Filenamen-Erweiterung mit TAB ;Double TAB requester ;Display a requester if TAB is pressed twice within the double ;click interval 'Doppel-TAB Dateirequester ;First TAB expands fully ;If not turned on, ViNCEd will try a partial expansion first. 'Erstes TAB ergänzt vollständig ;Requester if expansion is ambigious ;If turned on, ViNCEd will display a requester if more than one expansion ;is possible 'Requester, falls Ergänzung nicht eindeutig ;Show ViNCEd matches, not directories ;Don't use a directory requester for the matches, but show the list ;that ViNCEd generated interally. Additional entries in this list (that ;can't be shown by a standard requester) are devices, assigns and resident ;modules. However, you can't go into a directory with this requester 'ViNCEd Ergänzungen in den Requester ;************************************************************************* ; ; #376 ;ViNCEd Shell Page 3 (of 5) : 'ViNCEd Shell Seite 3 (von 5) : ;Help... 'Hilfe... ;4th Page » '4. Seite » ;Use shell mode by default ;Turn on shell mode even if the SHELL keyword is missing in the PATH 'Shell-Modus als Voreinstellung ;The next ones are new to 40.30: ;Search commands in currernt and C: only ;Speed up TAB expansion of commands by searching them in the ;current directory and C: only. 'Nur in C: und im aktuellen Pfad suchen ;Show matching directories first ;When expanding by hand, the directories are sorted in prior to ;the devices. THIS DOES NOT change the sorting of the strings ;in the requester, since this is up to reqtools/asl - only the ;manual list is sorted differently. 'Directories zu Beginn einsortieren ;Enable close requester ;Turn on the requester warning if the user wants to close a shell ;with more than one process running in it. ;REMARK: The "safer close" setting must be turned on as well, to ;see this requester. 'Close-Requester einschalten ;Devices don't match implicitly ;Don't sort devices into the ViNCEd requester unless the user asked for ;devices explicitly by giving a ":" as the last part of the search pattern. 'Devices nicht implizit einsortieren ;*************************************************************************** ; The forth & fifth shell page, new to 40.30 is located AT THE END of this ; file... ;*************************************************************************** ;Buttons in the window page ;*************************************************************************** ; ;This page is used to setup the size of various buffers for ViNCEd, ;namely the command history and the visual history, upper and lower part. ; ;More is here in 40.30, and a second and third page is available as well ;The third page was added in 40.33, so please check out to change the titles! ; ; #384 ;ViNCEd Window Page 1 (of 3) : 'ViNCEd Fenster Seite 1 (von 3) : ;Help... 'Hilfe... ;History lines : ;The size of the command history in lines 'Größe der History : ;Upper Display size : ;The number of lines that are kept above the visual window, i.e. maximal ;number of lines scrolled off the window. 'Obere Zeilen : ;Lower Display size : ;The number of lines kept in the opposide direction, including the lines ;actually visible plus the lines kept below the visible window. 'Untere Zeilen : ;2nd Page » ;located at an usual place since I added this later '2. Seite » ;Monitor ;The name of the screen mode button 'Monitor ;Font ;The contents of the font selection button 'Schrift ;*************************************************************************** ;The second and third window page is at the end of this file! ; ;*************************************************************************** ;Buttons in the timing page ;*************************************************************************** ; ;Various timing rates are setup with this page ; ; #400 ;ViNCEd Timing Page : 'ViNCEd Timing Seite : ;Help... 'Hilfe... ;Cursor blink speed : ;Setup the blink interval. Units are milliseconds (1 ms = 1 thousands of a second) 'Cursor-Blinkzeit (in ms) : ;Vertical scroll threshold : ;If vertical scrolling is slower than this, ViNCEd will delay the refresh ;to speedup scrolling. Again measured in ms. 'Schranke für Scrollzeit : ;Rebuild delay : ;If this time has passed, ViNCEd will refresh the window. Again in ms. 'Zeit bis Wiederaufbau : ;Intuition delay (1.3 only): ;Only used with kickstart 1.3 and below. This should be setup to the ;usual time needed for intuition to do a window operation, i.e. resize. ;Usually the interval of the input device, i.e. 1/10th of a second. 'Intuition-Verzögerung(1.3): ;Allow delayed window refresh ;A checkmark. Must be turned on to allow a delayed refresh and to make use ;of the settings above. 'Verzögerter Wiederaufbau ;*************************************************************************** ;Buttons in the system pages ;*************************************************************************** ; ;The four system pages setup internal ViNCEd stuff that does not fit ;into the other categories. ; ; #416 ;ViNCEd System Page 1 (of 4) : 'ViNCEd System Seite 1 (von 4) : ;Help... 'Hilfe... ;2nd Page » '2. Seite » ;ViNCEd Guide Path : ;This gadget is used to setup the path of the VNC.guide. 'ViNCED Hilfe-Datei : ;Chunky pixel graphics ;If set, ViNCEd does not use the bitplane mask to scroll only used ;bitplanes. Useful for gfx cards. 'Chunky Pixel Graphik ;Line break at right border ;Break DOS output at the right window border. This line break operation ;is a bit different from what CON: does, since it is permanently. Lines ;won't get reorganized if the window gets resized. ;This one shouldn't be turned on! 'Zeilenumbruch am Fensterrand ;Inhibit horiz. scrolling by DOS output ;Do not scroll the window by DOS output. This avoids some flicker, but ;may move the cursor to invisible areas. ;This one shouldn't be turned on! 'Keine horizontales Scrolling durch das DOS ;VT-220 compatibility mode ;Some control sequences are interpretated differently if this is turned on. ;Also not useful if you want to run a shell in this window. 'VT-220 Kompatibilitätsmodus ;*************************************************************************** ; ; #432 ;ViNCEd System Page 2 (of 4 ) : 'ViNCEd System Seite 2 (von 4) : ;Help... 'Hilfe... ;3rd Page » '3. Seite » ;Destructive DEL and BS ;Usually a printed backspace moves the cursor backwards and does nothing else. ;If turned on, it will erase characters. The DEL is usually printed as a ;smear symbol. If turned on, it will erase characters. ;Not useful for the shell! 'DEL und BS löschen beim Ausdruck ;Insertion mode for DOS output ;If turned on, DOS output will be inserted into the window data instead of ;overwriting it. Since this is never done by CON:, leave this flag ;off for the shell. 'Einfügemodus für DOS Ausgaben ;Notify DOS about paste ;Do not paste if the user asks to do so, instead send a paste request ;to the reading program. THIS IS NOT USEFUL FOR THE SHELL. 'Paste Kommando an DOS schicken ;Disable full screen edit ;Totally forbid cursor movement thru cursor keys AND RETURN! This might ;be useful for programs that read masks, BUT IT IS NOT USEFUL for the ;shell. LEAVE IT OFF. 'Auf Zeilenbasis edieren ;*************************************************************************** ; ; #448 ;ViNCEd System Page 3 (of 4) : 'ViNCEd System Seite 3 (von 4) : ;Help... 'Hilfe... ;4th Page » '4. Seite » ;Quit shell : ;This is a system macro invoked if the user presses the close window ;gadget in an active shell. 'Beende Shell : ;New Window : ;A system macro expanded by the "New Window" item in the project menu. 'Neues Fenster : ;Get Help : ;A macro that should call the VNC.guide. Usually set to "SetVNC HELP" 'Hilfe aufrufen: ;Edit settings : ;A macro used to invoke the prefs editor. Usually "SetVNC". Called if ;the user select the "Settings" item in the project menu. 'Einstellungen : ;Fork new shell: ;Another macro used to build a new shell on Ctrl-Z. This one is unique ;since it is not expanded as a keyboard sequence, but Execute()-d ;instead (so use \n to terminate it instead of \r). Should be something ;like newcli. 'Shell erzeugen: ;*************************************************************************** ; ; ; #464 ;ViNCEd system page 4 (of 4) : 'ViNCEd System Seite 4 (von 4) : ;Help... 'Hilfe... ;« 1st Page '« 1. Seite ;Quit program : ;Another system macro that is called if a running program in a ViNCEd shell ;should be terminated. Called if the close gadget is pressed and a command ;is loaded. 'Beende Progr. : ;Icon path : ;This is the path of the icon that is displayed if a ViNCEd window gets ;iconified. It is a standard workbench icon, without the ".info". 'Iconpfad : ;Icon title : ;The title that is shown under the icon. Defaults to the window title or ;to the title that is set by some XTerm control sequence. 'Icontitel : ;************************************************************************ ;The second window page, located here since I added it later ;************************************************************************ #472 ;ViNCEd Window page 2 (of 3): 'ViNCEd Fenster Seite 2 (von 3) : ;Help 'Hilfe... ;3rd Page » '3. Seite » ;Sample color ;Title of the box with the sample of the new color you can choose with ;the sliders for custom screens 'Farbbeispiel ;*** the next string changed ! *** ;Color :%s ;The current pen to be edited. The cryptic "%s" gets expanded to a ;number between 0 and 15, i.e. the actual pen number. 'Farbe :%s ;Custom Screen Colors: ;Title on top of the red,green,blue sliders ;This string is no longer printed because there's no room left.... 'Bildschirmfarben ;Red : ;The title in front of the slider for the red component 'Rot : ;Green : ;Same for the green slider 'Grün : ;Blue : ;Same for the blue slider. 'Blau : ;The next ones display a percent value, namely the contribution of ;red,green and blue, respectively, to the current color. ;There's usually no need to change them... ;%% is expanded into a single percent sign, by the way. ;%-3ld results in a three digit decimal number. ;%-3ld%% '%-3ld%% ;%-3ld%% '%-3ld%% ;%-3ld%% '%-3ld%% ;Load this register ;A checkmark, used to indicate if the current pen should be set by ;ViNCEd. The sliders are unaccessable unless this one is checked. 'Dieses Register setzen ;« Prev ;Move to the previous pen '« Zurück ;Next » ;Edit the next pen 'Vorwärts » ;Set ANSI mapping ;A checkmark added to the 40.15 release of ViNCEd. If set, this color ;defines not an hardware register, but the software ANSI mapping, i.e. ;the ANSI pen of the same color index. 'ANSI Farbe definieren ;************************************************************************** ;The fourth shell page, also added for 40.30 ;************************************************************************** #488 ;ViNCEd Shell Page 5 (of 5) : 'ViNCEd Shell Seite 5 (von 5) : ;Help... 'Hilfe... ;« 1st Page '« 1. Seite ;Name only qualifier ;Setup the qualifier for icon-drop, used to indicate that the user wants ;to insert the name of the dropped icon only. 'Nur Namen einfügen ;Path only qualifier ;The same, but for the path-only icon drop modifier 'Nur Pfad einfügen ;The names of the keys. Shouldn't change until they are labeled ;differently at your local keyboard. All are present twice, once for ;the name only and once for path only. Please change both if you ;have to change them at all. ;Shift 'Shift ;Shift 'Shift ;Control 'Control ;Control 'Control ;Alt 'Alt ;Alt 'Alt ;Commodore ;The left amiga key 'Commodore ;Commodore 'Commodore ;************************************************************************ ;The fourth edit page, also added later on ;************************************************************************ #504 ;ViNCEd Edit page 4 (of 5) : 'ViNCEd Editor Seite 4 (von 5) : ;Help 'Hilfe... ;5th page » '5. Seite » ;Invisible type ahead ;Enable the type ahead. Typing while no input is requested won't go into ;the window, it is instead buffered and displayed as soon as some ;program wants to read keyboard input. 'Asynchroner Tastaturbuffer ;Enable scrollers in RAW mode ;Allow scroller usage, even in RAW mode. The scrollers are usually ;ghosted (disabled), but when this flag is turned on you MAY scroll ;in the window. This works like an implicit XTerm mode for RAW windows. 'Scroller im RAW Modus verwendbar ;Inverse ANSI coloring ;Swap the meaning of ANSI black and white for better readability. Does ;work ONLY in the ANSI mode. 'Inverse ANSI-Farben ;Numeric keypad cursor control ;Use the numeric keypad for cursor and history movement, not for number ;input. 8 and 2 replace ALT+cursor, 4 and 6 the left and right cursor keys ;7 and 1 scroll to the top / end of the buffer, 9 and 3 scroll upwards and ;downwards one page. 5 moves to the end of the line, and 0 toggles ;overwrite/insert mode 'Cursorsteuerung durch Ziffernblock ;Mouse clicks do not block ;If the XTerm mode is not enabled and you click into the window, the ;output of a printing program is usually stopped, to allow user inter- ;action. If, however, this flag is set, printing resumes immediately. ; ;New in 3.53: This flag is no longer supported 'Mausklick stoppt nicht die Ausgabe ;************************************************************************ ;The third window page ;************************************************************************ ; ;Some miscellaneous window control flags have been added here. This page ;is new to 40.33 ; #513 ;ViNCEd window page 3 (of 3): 'ViNCEd Fenster Seite 3 (von 3) : ;Help... 'Hilfe... ;« 1st Page '« 1. Seite ;Disable horizontal scroller ;Prevents ViNCEd from adding a horizontal scroller by default. ;The scroller can be requested with a PROPX in the window open path ;explicitly. 'Keinen horizontalen Scroller ;Disable vertical scroller ;Same for the vertical scroll bar. 'Keinen vertikalen Scroller ;************************************************************************ ;The fifth edit page, new to 40.15 ;************************************************************************ #528 ;ViNCEd Edit page 5 (of 5) : 'ViNCEd Editor Seite 5 (von 5) : ;Help 'Hilfe... ;« 1st page '« 1. Seite ;Exchange A+BS/Del with S+A+BS/Del ;Swap the keyboard layout of these two delete-related settings. ;If checked, Alt+Del and Alt+Bs erase the end/beginning of the line ;Delete user input and delete word are mapped to the same keys with ;Shift as additional qualifier 'Vertausche A+BS/Del mit S+A+BS/Del ;Keep bottom of window adjusted ;The bottom line of the window will be scrolled down to the bottom border ;of the window on resize, giving the old CON: behaiviour. 'Unterste Zeile am Rand ausrichten ;Rigid XTerm cursor ;If selected, the cursor position can't be set with a mouse click ;if the XTerm mode is enabled. Ignored if XTerm mode is not set. 'Starrer XTerm-Cursor ;************************************************************************ ;The fourth shell page, new to 40.15 ;************************************************************************ ; ;This page was inserted between the third and forth shell page in 40.15. ;The former forth page is now the fifth page and defined above... ; #544 ;ViNCEd Shell page 4 (of 5) : 'ViNCEd Shell Seite 4 (von 5) : ;Help 'Hilfe... ;5th page » '5. Seite » ;Icon files don't match implicitly ;Don't add ".info" files to the TAB expansion list unless the user asks ;for them by giving a pattern ending with .info '".info" Dateien nicht implizit einsortieren ;Shorter command search paths ;Truncate the search path for commands even more. If this is enabled, ;the "Partial Path" C: and CurrentDir() is used with the ;"Search commands in current and C: only" disabled, and only the current ;dir is used if both flags are enabled. 'Noch kürzere Suchpfade für Kommandos ;New for 3.53 ;Keep duplicates in history ;If two identical lines are entered, only the first one will go ;to the history by default. If this flag is selected, both will ;and ViNCEd won't scan any more for identical commands. 'Identische Zeilen in die History aufnehmen ;************************************************************************ ;That's all folks! ;