Article 379 of comp.sys.amiga.reviews: Path: news.csos.orst.edu!flop.ENGR.ORST.EDU!ogicse!uwm.edu!math.ohio-state.edu!cs.utexas.edu!swrinde!menudo.uh.edu!usenet From: bn@gnu.ai.mit.edu (Bo Najdrovsky) Newsgroups: comp.sys.amiga.reviews Subject: MINI-REVIEW: EGS Spectrum 28/24 graphics card Keywords: hardware, graphics, 24-bit, Zorro III, commercial Message-ID: <29e9nl$daa@menudo.uh.edu> Date: 12 Oct 93 12:59:33 GMT Article-I.D.: menudo.29e9nl$daa Sender: amiga-reviews@math.uh.edu (comp.sys.amiga.reviews moderator) Reply-To: bn@gnu.ai.mit.edu (Bo Najdrovsky) Followup-To: comp.sys.amiga.graphics Distribution: world Organization: The Amiga Online Review Column - ed. Daniel Barrett Lines: 145 Approved: barrett@math.uh.edu NNTP-Posting-Host: karazm.math.uh.edu PRODUCT NAME EGS Spectrum 28/24 BRIEF DESCRIPTION The EGS Spectrum is a high performance Zorro II/III graphics adapter for the Amiga series computers. It provides users with high resolution and color depth capability. AUTHOR/COMPANY INFORMATION Name: Great Valley Products, Inc. Address: 637 Clark Ave. King Of Prussia, PA 19406 USA Telelphone: (215) 354-9495 Fax: (215) 337-9922 LIST PRICE $599.00 (US) for the 2MB RAM version. I paid $540. SPECIAL HARDWARE AND SOFTWARE REQUIREMENTS Amiga with a Zorro slot. AmigaDOS 2.04 or greater. Minimum of 2 MB of RAM. COPY PROTECTION None. MACHINE USED FOR TESTING My current setup: o Amiga 3000/25 with 2 CHIP 4 FAST, rev. 11 Super Buster chip o IV24 frame buffer/genlock o BCD2000A single frame controller o EMPLANT Macintosh emulation card (deluxe version) o Mitsubishi Diamondscan 1381A multisync monitor o Texel DM5024 CD-ROM drive. o OS 2.1 and OS 3.1 REVIEW Dan read my initial post on comp.sys.amiga.graphics regarding this card, and suggested that I submit it as a mini-review. Therefore, I'm including my original posting, and some further experiences I've had with the board since I got it. On Friday, October 8th, I received my EGS Spectrum 28/24 2MB version. This card is GREAT! I shall never yearn for AGA again. :-) It came with the EGS system software (obviously), and some miscellaneous EGS toys like Tetris, a function plotter, and a dock program (a la ToolManager). The installation was totally painless. I just double-clicked on the Install icon which invoked the C= Installer program, and away I went. A note here for those getting the board: be sure to select the Advanced User option, so that you can select between 68030 and 68000 versions of the libraries. In the Intermediate user setting, it will install the 68000 version by default. Once the installation is done, you just reboot, and POOOF!: your Amiga has a bunch of new screen modes. Some of the preset modes that GVP provides tend to flicker a bit too much for my taste. This is because they are designed to fit a wider range of multisync monitors (hence, smaller scan rate numbers). Since I have the Mitsubishi Diamondscan 1381A monitor, I used the included EGS program for designing your own screen modes, and created a virtually flicker-free 1024x768 90Hz screen mode. The included 800x600 24 bit mode is noninterlaced, but the refresh rate is something like 45 Hz, so it looks worse then PAL. So, I created my own 800x600x16 mode which is rock solid. This mode is great for running EGS Paint. Speaking of which, I've played with it a bit, but not enough to really give you guys an in-depth overview. All I can say is that my first impression was very favorable. I also had a PC clone owning friend here when I installed the stuff, and when I brought up EGS paint, and loaded the included 24 bit picture, he just said "Wow, my PC sure can't do that!" I gotta tell ya, I don't usually get into these stupid MCIBTYC ("My Computer Is Better Than Your Computer") wars, but hearing that statement sure made me feel warm and fuzzy. :-) Finally, I want to report one annoyance. When I select any of the EGS screen modes as the default Workbench screen and reboot, all I get is a white screen, I know that Workbench is loaded because my hotkeys work (if I hit Alt-F1, a shell gets loaded). The Workbench functions just fine if I switch into the EGS mode AFTER the whole system has booted into Amiga screen mode. This problem disappeared when I switched from AmigaDOS 2.1 to 3.1 (I work for a registered developer). Here is some new information since I posted my original review in c.s.a.graphics. Since then, I've installed OS 3.1 on my system as I said. My Amiga now boots directly into 1024x768 256-color Workbench. Note that I was not able to use 256 colors under 2.1, though some folks E-mailed me and told me that they got it to work. I should point out that the 256-color Workbench is MUCH faster than what I've seen on an A4000 using AGA. Moving windows around is as fast as 2 bit (4 color) regular Amiga screen. I noticed that using WBPattern Prefs or a background picture slows the redraws down considerably, so I decided not to use it. On software compatibility side, thus far I have tested Final Copy II, PageStream 2.2, Term 3.3, Postview 1.1, and EMPLANT. All of these programs work flawlessly in EGS screenmodes. FCII needs to run on the Workbench, but it handles the 256 colors very well. PS 2.2 also runs on the Workbench, but it does not take advantage of the color. However, it most certainly benefits from the high resolution. Term 3.3 seems like a different program. I've always used VLT because there was nothing faster. I tried Term once before, but stopped using it, because it was slow -- well, no more. Using the screen database, I selected a 640x480 VGA screen, and it runs as fast as it normally would on a 1 or 2 bitplane screen. Postview also uses the screen database, so it was able to open its own 1024x768 screen without any problems. Finally, there's my EMPLANT. This was one of the reasons I got the card in the first place, and I am not disappointed. The Mac display emulation seems faster than our Mac IIci at the office. CONCLUSION After only owning the card for less than a week, I can confidently say that it's the best Amiga purchase I've ever made. This card is fast, well integrates into current the Amiga system, and truly delivers what it promises. Originally, I was a bit jealous of my AGA equipped friends, however now I'm glad I've kept my A3000. This card really does take the Amiga "beyond AGA" as the adverts state. This review is Copyright 1993 by Bo Najdrovsky. You may redistribute it all you like, as long as it remains in its entirety. If you wish to print it somewhere, please contact me at bn@gnu.ai.mit.edu. --- Daniel Barrett, Moderator, comp.sys.amiga.reviews Send reviews to: amiga-reviews-submissions@math.uh.edu Request information: amiga-reviews-requests@math.uh.edu Moderator mail: amiga-reviews@math.uh.edu Anonymous ftp site: math.uh.edu, in /pub/Amiga/comp.sys.amiga.reviews Article 384 of comp.sys.amiga.reviews: Path: news.csos.orst.edu!flop.ENGR.ORST.EDU!ogicse!netnews.nwnet.net!news.clark.edu!spool.mu.edu!howland.reston.ans.net!pipex!uunet!tadpole.com!news.dell.com!swrinde!menudo.uh.edu!usenet From: jeff_w1@sfov1.verifone.com (Jeff Wahaus) Newsgroups: comp.sys.amiga.reviews Subject: REVIEW: EGS Spectrum 28/24 graphics card Keywords: hardware, graphics, 24-bit, Zorro III, commercial Message-ID: <29hmma$j0@menudo.uh.edu> Date: 13 Oct 93 19:59:06 GMT Article-I.D.: menudo.29hmma$j0 Sender: amiga-reviews@math.uh.edu (comp.sys.amiga.reviews moderator) Reply-To: jeff_w1@sfov1.verifone.com (Jeff Wahaus) Followup-To: comp.sys.amiga.graphics Distribution: world Organization: The Amiga Online Review Column - ed. Daniel Barrett Lines: 271 Approved: barrett@math.uh.edu NNTP-Posting-Host: karazm.math.uh.edu PRODUCT NAME EGS Spectrum 28/24 BRIEF DESCRIPTION The following is a review of GVP's new EGS Spectrum 28/24 graphics board. I've had this board for a little over a week now, so I think that I have a pretty good feel for what its capabilities are. Here are my impressions so far as well as the technical specs. AUTHOR/COMPANY INFORMATION Name: Great Valley Products, Inc. Address: 637 Clark Ave. King Of Prussia, PA 19406 USA Telelphone: (215) 354-9495 Fax: (215) 337-9922 LIST PRICE The list price of the Spectrum board is $599 for the 2MB version and $499 for the 1MB version. SPECIAL HARDWARE AND SOFTWARE REQUIREMENTS Amiga with a Zorro slot. AmigaDOS 2.04 or greater. Minimum of 2 MB of RAM. COPY PROTECTION None. MACHINE USED FOR TESTING My system is an Amiga 2000 with 22MHz 68030/68882 and 12MB of memory, A2320 Display Enhancer, Commodore 1950 Multisync monitor, and various other SCSI disk drives, tape drive, bridge board, etc. INSTALLATION Installation was very simple. I just put the board into a slot, connected the supplied video jumper cable from the output of my Display Enhancer to the Spectrum's input (I really appreciated the supplied cable), and that was it. The software comes on 5 disks and uses Commodore's Installer program. OVERVIEW The performance of the Spectrum board is exceptionally good, and this is with a Zorro II system. I imagine that this board would fly on a Zorro III system (you will need an up-to-date Buster chip for Zorro III though). Scroll speeds on a EGS 640x480 pixel 16-color Workbench are about 8 times faster than when using an equivalent native Amiga mode. Even when using an EGS 800x600 pixel 256-color Workbench, scroll speeds do not substantially degrade. An awesome feature of the Spectrum/EGS system is that you can move windows with their contents intact in real time. This looks really incredible in 24-bit color. In EGS Paint, moving around with an oversized 800x1200 24-bit image was done in real time as well. The image quickly and smoothly scrolled as I moved the windows sliders to reveal the hidden parts of the image. The output of the Spectrum is exceptional. All of the EGS display modes are very crisp. When the native Amiga display modes are passed through (this is handled automatically), they appear as they always did with no noticeable noise or interference from the Spectrum board. I am a little disappointed that the maximum refresh rate for a 800x600 pixel 24-bit screen is 50Hz. I guess you Europeans won't mind this, as you all are used to that 50Hz flicker. I did define a 800x600 pixel 16-bit screen mode at 60Hz and I am pleased with this mode. To be honest, I can't discern much difference between the 16-bit and 24-bit modes; they both look very good. One slight glitch I noticed was that the EGS's cursor produces a short line of horizontal pixels if you moved it to the very top line of the display screen. Not a big problem, though. After reading the manual, I discovered that this may be a result of the way in which the screen mode was defined. Sure enough with a little bit of tweaking, I was able to get rid this problem. THE HARDWARE The board itself looks very clean and professionally designed. There is only 1 jumper, which controls the Force Zorro II option. There are two 512KB RAM chip sockets which were filled on my board as I have the 2MB version. There is also an empty socket in the middle of the board. I would guess that this socket will be used to support the upcoming RTG (ReTargetable Graphics) from Commodore. The board has 2 ports which are accessible from the back of the computer: one is a 9-pin video input, and the other is a 15-pin (SVGA type) video output. One thing worth mentioning is RAM. You will need a lot of it. The Spectrum board uses Fast RAM for storing screens. Chip RAM is not used at all unless you use a native Amiga display mode. For instance, I had both an 800x600x3 Workbench screen and a 736x556x24 EGS screen open and still had 980K of Chip RAM free on a 1MB Chip RAM machine. All EGS screens do use Fast RAM, however. My 12MB machine was constantly getting low on memory (less than 2MB free) when running several programs at once. Granted, I did have a couple of 24-bit images loaded in EGS-Paint and an Image processing program running at the same time. THE SOFTWARE The supplied software includes EGS Paint and several preferences programs: one to set the default EGS Screen Mode, one to set the EGS System Fonts, one to set the Display Colors, and the Display Adjust program for defining and editing screen modes. Another preferences program lets you edit the EGS sprite pointers, although this program constantly crashed on me. And finally, there is a program to select which EGS screen blanker to use. The screen blanker program has several neat blankers to choose from like raindrops, fractals, EGS wave, and others. There are also several utility programs included such as an IFF display program, a clock, an EGS version of the text display program 'More', an EGS Shell (couldn't get this one to work), and a screen/window grabber program which saves EGS displays to an IFF-24 file. There is a program to let you define 24-bit backgrounds for your EGS screen. Several pre-defined backgrounds are provided. In a directory named 'Tools' there is a neat little function plotter program and a Tetris Game. The software was all pretty straightforward: I was up and running without opening the manuals. That is, until I tried actually using some of EGS Paint's features. It took a little getting used to; but with a little help from the manual, I quickly got the gist of it. My impression of EGS Paint is not so favorable, but it does have a few neat features. The author obviously spent a lot of time on the stencil features. They allow you to mark off areas of the image which can/cannot be modified. The stencil area can be captured as a brush or saved to disk. EGS Paint will let you have multiple images open at the same time. Also it will let you have 2 or 4 views of the same image within a window at different magnifications if desired. Overall I would say that EGS Paint still needs quite a bit more work. I haven't really found any bugs with EGS Paint, but there are a few things which need fixing. For instance the window which contains the image being edited constantly updates its title when the mouse moves (even when coordinates have been turned off). Not only does this needlessly slow down painting, but it is very annoying to see the title bar flickering like that. Another thing which I don't like about this program is that when drawing lines with a brush larger than 1 pixel, you get a thin 1 pixel wide representation of where the line will be drawn. I would really like to have the option of seeing the entire thick line drawn before I let go of the mouse button. I know that this would be slow, but they could at least make it an option so that you can see what the line will really look like if you want to. Another dislike about EGS Paint is that when you grab a brush you are given a 1 pixel deep outline image of what the brush looks like until you stamp it down on the image. If the EGS system is fast enough to move entire 24-bit windows with their contents intact in real time then why can't EGS Paint show the full 24-bit brush? Brushes also don't seem to know about using transparent background colors. I could go on and on about what features are missing but I won't. Would I say that EGS Paint is useless? No, not really. It is useful for touching up 24 bit images. It does have a slick interface. But in comparison to a program like Deluxe Paint there is quite a lot missing. One notable capability missing from both EGS Paint and the IFF Viewer program is the ability to read and write JPEG and GIF type images. Currently only IFF is supported. It is a real headache to convert JPEG's to IFF before working with them. And the size of them!!! A 150K JPEG image becomes about 2MB once it's converted to IFF-24. To give GVP credit, they do use external libraries to support file IO. This means all they have to do is release modules for JPEG and GIF in the future and the programs will automatically support them. I have been using HamLab II+ to do the conversions. It's an excellent program that is well worth the modest asking price. I would love direct Spectrum support in this program. Ed, are you listening? Hint. Hint. Moving on to the rest of the software.... A nice program included is the display database/screen mode creator. You can define custom resolutions to add to the display database. It gives you complete control over the Vertical and Horizontal scan rates allowing you to squeeze the most out of you monitor. Compatibility with existing software is good as long as you don't try and use an EGS display mode. This is probably the most disappointing aspect of this package right now. I tried running ProPage 3.1, ProDraw 3.0, and Final Copy II on a 256 color hi-res Workbench screen, and none of these programs would work at all. In fact they crashed and burned. Both ProPage and ProDraw would not even work on their own custom screens if I had the workbench set to an EGS mode of any type. I did have a little luck, however. Most programs which open up a window on the Workbench screen will work. They don't seem to know or care about any extra colors you have over 16 though. Even the Workbench preferences programs won't use more than 16 colors. I'm running Workbench 2.1 by the way. I would really like to see GVP come up with a screen mode promoter program like the Retina graphics board has currently. Programs which use the Display Database do work correctly. I currently have exactly 2 programs which do use the display database (out of thousands). One is the Workbench and the other is Term 3.4. Final Copy II does work on large screens as long as they have 32 colors or less. I guess I'll be needing a lot of software upgrades in the near future. SPECIFICATIONS Zorro II/III autosense (with a "force Zorro II" jumper on board) 32-bit Video Local Bus 1MB or 2MB of DRAM (I got the 2MB version) Maximum pixel display speed: 28M pixels/sec @ 24bits 80M pixels/sec @ 8bits Maximum Display Screen Sizes: 1600x1280 @ 4 bits 1280x1024 @ 8 bits 1024x768 @ 16 bits 800x600 @ 24 bits Zorro Bus to Spectrum bandwidth: Zorro II - 3.5 MB/Sec Zorro III - 12.0 MB/Sec Special Hardware: Hardware Blitter 64x64 pixel sprite (pointer) Video Signal Passthrough (allows all Amiga modes to be displayed with 1 monitor) BUGS The EGS sprite pointer program would not run -- it crashed constantly. I could not get the EGS shell program to work. CONCLUSIONS In retrospect I would say that Spectrum board is a really nice piece of hardware. My complaints with this system are all software related. I think that we can count on the software's improving, knowing GVP's reputation. I feel that they rushed the software to get this board out because of the heavy competition now emerging. Not that all of the software included is all bad. In fact, it all has a very polished look, but it lacks a little substance right now. Once the software catches up, I will be in 24-bit bliss. The opinions expressed above are my own. I am in no way connected with Great Valley Products. I am a software engineer by trade and an artist by heart. -Jeff Wahaus- jeff_w1@verifone.com --- Daniel Barrett, Moderator, comp.sys.amiga.reviews Send reviews to: amiga-reviews-submissions@math.uh.edu Request information: amiga-reviews-requests@math.uh.edu Moderator mail: amiga-reviews@math.uh.edu Anonymous ftp site: math.uh.edu, in /pub/Amiga/comp.sys.amiga.reviews