ADDBOARDHELP 19
When you choice 'Addboard', the door will ask you for your boardname,
Active nodes, Phonenumber and a comment. The comment is an optional
line where you can write whatever you like about the board. You have 16
chars for the boardname, 2 chars for the number of nodes, 15 chars for
the phonenumber, and 35 for the optional comment. You may also press
return, empty on the number of nodes, phonenumber and the comment to
get a default line.

Enter the Boardname (JuNgLe! BBS   ) < This question must be answered.

Enter how many nodes your board are running (01) < This is the default if you
                                                   just press return empty

Enter the Phonenumber (=+= PRiVATE =+=) < This is the default if you just
                                          press return empty.

Enter the baud rate of your bbs (28.8) < default is 28.8...the '.' is auto.

Enter a comment for the board (AMIGA ONLY! NUP REQUIRED!  )
EDITOPTIONS 16
When you have answered the easy questions, you have some editing options.:

C)hange L)ist Q)uit S)ave option?

The C)hange command able you to change the boardname, nodes,
phonenumber and the comment.

The L)ist command lists your final output. Good way to check if you
have written all right.

The Q)uit command prompts you back to the mainmenu without saving.

The S)ave command saves your board to the logoff screen. First, ABTL
checks so no user on some other node are saving. Then, if the sysop have
turned the duplicate check on, ABTL checks so the board isn't already
added.
LISTLOGOFF 3
The logoff screen will be displayed with all boards. If no logoff screen
is availible, ABTL will tell you soo. (You are also able to delete
logoffscreen in the sysopcommands)
SYSOPCOMMANDS 13
In the sysopmenu, you have some nice sysopediting. You can choice in the
configfile how much seclevel it's required. The default is 255.
You have the options Delete Logoffscreen, Make/edit config, Edit board
and Remove Board.

The D)elete Logoffscreen command able you to delete the whole logoffscreen.

The M)ake/Edit config command is an configuration editor. Use this if you
want to change anything in the configfile.

The E)dit board command let's you to edit a board in the logoffscreen.

The R)emove board command let's you to remove a board in the logoffscreen.