Short: 85kHz Monitor preset for CyberGraphX V3 Uploader: cyco@gmx.de (Sebastian Huebner) Author: cyco@gmx.de (Sebastian Huebner) Type: gfx/board Kurz: 85kHz-Monitortreiber fuer CyberGraphX V3 Requires: CyberGraphX-Software, Graphicboard Version: $VER: Monitor-85KHz.readme (25-Jan-1998) 2.14 Replaces: gfx/board/Monitor-85kHz.lha, gfx/board/Monitor-85KHz.lha WHAT IS NEW MAJOR UPDATE! (Nearly) complete rework of all screen modes! - NEW: 320 x 200 x 256/64k/16M (for D**m & Quoke ;-) - Cloned AGA modes (320/640 x 256/512 x 256) now all at 85Hz, using doublescan if needed - Adjusted higher resolutions: you can now switch from 1024x786 with 256 colours to 64k colours _without_ monitor resyncing !! Works with 320x200, 320x240, 640x480, 800x600, 1024x768, 1152x864. ==>Use Workbench with 64k colours (nice backdrop) and e.g. FinalWriter with only 256 colours (for speed); switching the screens will be extremly fast and your monitor won't even notice it (no flickering, cr*zy sync sounds, etc.) - all modes up to 1024x768x64k now @85Hz WHAT IS IT This is a driver to use with a 85kHz monitor and the CyberGraphX system. I use it on my A4000/604e@200/060@50 with a Cybervision64 (2MB) and a Belinea 105596 17" monitor. When I started to develop it I was using CGX V2. Now I switched to CyberGraphX V3 and I'm not able to test it with V2 any more, but I think this would be possible. Please tell me wether this is right or not! If there are any other problems / missing features, PLEASE contact me () !! FEATURES The driver offers the following resolutions/frequencies: | number of colours | | 256 64k 16M | Comment 64k = 65536 ------------------------------------------- 16M = 16.7 millions 320x256 | 85 -- -- | CL, DS 320x512 | 85 -- -- | CL 640x256 | 85 -- -- | CL, DS 85 = runs at 85Hz, etc. 640x512 | 85 -- -- | CL ------------------------------------------- 320x200 | 85 85 85 | DS XX = out of limits 320x240 | 85 85 85 | DS 640x480 | 85 85 71 | -- = do YOU need this ? 800x600 | 85 85 55 | 1024x768 | 85 85 XX | CL = cloned AGA mode for 1152x864 | 70 70 XX | screen promotion 1280x1024 | 67 XX XX | 1600x1200 | 50 XX XX | DS = uses Doublescan (see MonitorSpecs.txt for details) INSTALLATION (CyberGraphX V3) Unpack archives, cd into Monitor-85kHz drawer, then type in Shell: 1. Copy Monitor-85kHz TO SYS:Prefs/presets/monitors 2. Echo > ENVARC:cybergraphx/Monitor "Monitor-85KHz" (e.g. "ENVARC:cybergraphx/CVision64Monitor") Select a none-CyberGraphX screen mode (e.g. AGA-MultiScan) with SYS:Prefs/ScreenMode and save it. Restart your System (RESET). After Workbench comes up, you can select one of the new/modified screen modes! Use SYS:Prefs/ScreenMode to use and save it. OTHER CONFIGURATIONS : ... (None tested with the new driver. Please contact me!) DISCLAIMER **** ATTENTION **** ATTENTION ***** ATTENTION **** ATTENTION **** ! ! ! !! CHECK YOUR MANUAL BEFORE USING THIS DRIVER !! ! ! ! ! YOU CAN DESTROY YOUR MONITOR AND/OR COMPUTER AND/OR PERIPHERY ! ! IF THESE CONFIGURATIONS ARE OUT OF THE LIMITS OF YOUR SYSTEM ! ! ! ! IF SO, D O N O T U S E I T ! ! ! ! ! ! IF YOU USE IT, YOU TOTALLY DO IT AT YOUR OWN RISK, OK ? ! ! ! **** ATTENTION **** ATTENTION ***** ATTENTION **** ATTENTION **** DISTRIBUTION Private use: ----------- This is Freeware. eMail is always welcome (thanx to my registered users :-) ) Aminet(CD), Fred Fish: ---------------------- Distribution welcome and allowed !! Other commercial use: --------------------- NO ONE is allowed to include these files on CD or disk or other medium whithout my permission !! CONTACT eMail: cyco@gmx.de (Sebastian Huebner)