Short: V2.2 Update of AmigaTalk (Smalltalk GUI)

Uploader: jimbot@frontiernet.net (The Author)
Author:   jimbot@frontiernet.net (James T. Steichen)
Type:     dev/lang
Version:  V2.2

AmigaTalk V2.2 is a version of 'Little Smalltalk' (V1.0 by Tim Budd) that
has been re-written & enhanced for the Amiga line of computers.

               James T. Steichen, Copyright (c) 1998-2002.

   Be sure to have the sound turned on when you start the program!
   (It's called AmigaTalk for a reason!)
   
WARNING:
~~~~~~~
   There are some things that I can no longer test due to the fact
   that my System has a CyberVision 64D graphics card & is using
   the cybergraphics.library (et al).  I would appreciate some
   feedback about problems that you might find, since I will not
   always be able to find them.

   The system is currently NOT fully documented (especially IFF & BOOPSI
   Classes), so expect to see some holes in the documentation.
   
   I did NOT go back & verify that all the Test files still work as
   shown.
   
REQUIREMENTS
~~~~~~~~~~~~
   AmigaTalk uses DeckBrowser which is Copyrighted (c) by InovaTronics.
   I've included a copy of it with my distribution.  It should be placed
   in the command path where the Amiga OS can find it (example: 'C:')

   68040 or better microprocessor. (68000 or 68020 available upon request).

   20+ Mb of RAM (or you can edit the AmigaTalk:c/InitializeCommands
                  script & delete the instantiations for Intuition Tags,
                  DosSystem Tags & DataTypeSystem Tags & drop this
                  number down to 4 Mb of RAM).
   
   AmigaDOS 3.5+

   Hard disk (5MB of space).

HISTORY
~~~~~~~
   For Version 2.2 the following enhancements/bug fixes were
   made:
   
   * Fixed the install script (by deleting the History.txt copy
     action & including the Images directory in the distribution).
     
   * Added Status Window coordinate bookeeping to the AmigaTalk.env
     file.
   
   * Added more error detection code to initialization of the
     AmigaTalk screen code so that the Command & Status window
     will fill whatever screen you select.  I've been able to check
     almost all screen modes that the CyberVision-64D uses (except
     for 16-bit 1024 * 768, which shows a black screen).  
     AmigaTalk will not let you use a Screen smaller than 640 * 400,
     so don't try to.  If you rename AmigaTalk.env, AmigaTalk will
     use the coordinates from your Workbench screen (or whatever
     screen is active).

   * Added a ScreenModeID ToolType to the Icon (default: 0x40D20001).

   See AmigaTalk:help/History.guide for the rest.