/* Automatically generated by po2tbl.sed from sh-utils.pot. */ #if HAVE_CONFIG_H # include #endif #include "libgettext.h" const struct _msg_ent _msg_tbl[] = { {"", 1}, {"invalid argument %s for `%s'", 2}, {"ambiguous argument %s for `%s'", 3}, {"Valid arguments are:", 4}, {"write error", 5}, {"Unknown system error", 6}, {"%s: option `%s' is ambiguous\n", 7}, {"%s: option `--%s' doesn't allow an argument\n", 8}, {"%s: option `%c%s' doesn't allow an argument\n", 9}, {"%s: option `%s' requires an argument\n", 10}, {"%s: unrecognized option `--%s'\n", 11}, {"%s: unrecognized option `%c%s'\n", 12}, {"%s: illegal option -- %c\n", 13}, {"%s: invalid option -- %c\n", 14}, {"%s: option requires an argument -- %c\n", 15}, {"%s: option `-W %s' is ambiguous\n", 16}, {"%s: option `-W %s' doesn't allow an argument\n", 17}, {"block size", 18}, {"Written by %s.\n", 19}, {"\ \n\ Copyright (C) 1999 Free Software Foundation, Inc.\n\ This is free software; see the source for copying conditions. There is NO\n\ warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n", 20}, {"Memory exhausted", 21}, {"Try `%s --help' for more information.\n", 22}, {"\ Usage: %s NAME [SUFFIX]\n\ or: %s OPTION\n", 23}, {"\ Print NAME with any leading directory components removed.\n\ If specified, also remove a trailing SUFFIX.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n", 24}, {"\ \n\ Report bugs to .", 25}, {"too few arguments", 26}, {"too many arguments", 27}, {"\ Usage: %s [OPTION] NEWROOT [COMMAND...]\n\ or: %s OPTION\n", 28}, {"\ Run COMMAND with root directory set to NEWROOT.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n\ \n\ If no command is given, run ``${SHELL} -i'' (default: /bin/sh).\n", 29}, {"cannot change root directory to %s", 30}, {"cannot chdir to root directory", 31}, {"cannot execute %s", 32}, {"\ Usage: %s [OPTION]... [+FORMAT]\n\ or: %s [OPTION] [MMDDhhmm[[CC]YY][.ss]]\n", 33}, {"\ Display the current time in the given FORMAT, or set the system date.\n\ \n\ -d, --date=STRING display time described by STRING, not `now'\n\ -f, --file=DATEFILE like --date once for each line of DATEFILE\n\ -I, --iso-8601[=TIMESPEC] output an ISO-8601 compliant date/time string.\n\ TIMESPEC=`date' (or missing) for date only,\n\ `hours', `minutes', or `seconds' for date and\n\ time to the indicated precision.\n\ -r, --reference=FILE display the last modification time of FILE\n\ -R, --rfc-822 output RFC-822 compliant date string\n\ -s, --set=STRING set time described by STRING\n\ -u, --utc, --universal print or set Coordinated Universal Time\n\ --help display this help and exit\n\ --version output version information and exit\n", 34}, {"\ \n\ FORMAT controls the output. The only valid option for the second form\n\ specifies Coordinated Universal Time. Interpreted sequences are:\n\ \n\ %%%% a literal %%\n\ %%a locale's abbreviated weekday name (Sun..Sat)\n\ %%A locale's full weekday name, variable length (Sunday..Saturday)\n\ %%b locale's abbreviated month name (Jan..Dec)\n\ %%B locale's full month name, variable length (January..December)\n\ %%c locale's date and time (Sat Nov 04 12:02:33 EST 1989)\n\ %%d day of month (01..31)\n\ %%D date (mm/dd/yy)\n\ %%e day of month, blank padded ( 1..31)\n\ %%h same as %%b\n\ %%H hour (00..23)\n\ %%I hour (01..12)\n\ %%j day of year (001..366)\n\ %%k hour ( 0..23)\n\ %%l hour ( 1..12)\n\ %%m month (01..12)\n\ %%M minute (00..59)\n\ %%n a newline\n\ %%p locale's AM or PM\n\ %%r time, 12-hour (hh:mm:ss [AP]M)\n\ %%s seconds since 00:00:00, Jan 1, 1970 (a GNU extension)\n\ %%S second (00..60)\n\ %%t a horizontal tab\n\ %%T time, 24-hour (hh:mm:ss)\n\ %%U week number of year with Sunday as first day of week (00..53)\n\ %%V week number of year with Monday as first day of week (01..52)\n\ %%w day of week (0..6); 0 represents Sunday\n\ %%W week number of year with Monday as first day of week (00..53)\n\ %%x locale's date representation (mm/dd/yy)\n\ %%X locale's time representation (%%H:%%M:%%S)\n\ %%y last two digits of year (00..99)\n\ %%Y year (1970...)\n\ %%z RFC-822 style numeric timezone (-0500) (a nonstandard extension)\n\ %%Z time zone (e.g., EDT), or nothing if no time zone is determinable\n\ \n\ By default, date pads numeric fields with zeroes. GNU date recognizes\n\ the following modifiers between `%%' and a numeric directive.\n\ \n\ `-' (hyphen) do not pad the field\n\ `_' (underscore) pad the field with spaces\n", 35}, {"standard input", 36}, {"invalid date `%s'", 37}, {"the options to specify dates for printing are mutually exclusive", 38}, {"the options to print and set the time may not be used together", 39}, {"too many non-option arguments", 40}, {"\ the argument `%s' lacks a leading `+';\n\ When using an option to specify date(s), any non-option\n\ argument must be a format string beginning with `+'.", 41}, {"undefined", 42}, {"cannot set date", 43}, {"\ Usage: %s NAME\n\ or: %s OPTION\n", 44}, {"\ Print NAME with its trailing /component removed; if NAME contains no /'s,\n\ output `.' (meaning the current directory).\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n", 45}, {"Usage: %s [OPTION]... [STRING]...\n", 46}, {"\ Echo the STRING(s) to standard output.\n\ \n\ -n do not output the trailing newline\n\ -e enable interpretation of the backslash-escaped characters\n\ listed below\n\ -E disable interpretation of those sequences in STRINGs\n\ --help display this help and exit (should be alone)\n\ --version output version information and exit (should be alone)\n\ \n\ Without -E, the following sequences are recognized and interpolated:\n\ \n\ \\NNN the character whose ASCII code is NNN (octal)\n\ \\\\ backslash\n\ \\a alert (BEL)\n\ \\b backspace\n\ \\c suppress trailing newline\n\ \\f form feed\n\ \\n new line\n\ \\r carriage return\n\ \\t horizontal tab\n\ \\v vertical tab\n", 47}, {"Usage: %s [OPTION]... [-] [NAME=VALUE]... [COMMAND [ARG]...]\n", 48}, {"\ Set each NAME to VALUE in the environment and run COMMAND.\n\ \n\ -i, --ignore-environment start with an empty environment\n\ -u, --unset=NAME remove variable from the environment\n\ --help display this help and exit\n\ --version output version information and exit\n\ \n\ A mere - implies -i. If no COMMAND, print the resulting environment.\n", 49}, {"\ Usage: %s EXPRESSION\n\ or: %s OPTION\n", 50}, {"\ \n\ --help display this help and exit\n\ --version output version information and exit\n\ \n", 51}, {"\ Print the value of EXPRESSION to standard output. A blank line below\n\ separates increasing precedence groups. EXPRESSION may be:\n\ \n\ ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n\ \n\ ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n\ \n\ ARG1 < ARG2 ARG1 is less than ARG2\n\ ARG1 <= ARG2 ARG1 is less than or equal to ARG2\n\ ARG1 = ARG2 ARG1 is equal to ARG2\n\ ARG1 != ARG2 ARG1 is unequal to ARG2\n\ ARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n\ ARG1 > ARG2 ARG1 is greater than ARG2\n\ \n\ ARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n\ ARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n\ \n\ ARG1 * ARG2 arithmetic product of ARG1 and ARG2\n\ ARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n\ ARG1 %% ARG2 arithmetic remainder of ARG1 divided by ARG2\n\ \n\ STRING : REGEXP anchored pattern match of REGEXP in STRING\n\ \n\ match STRING REGEXP same as STRING : REGEXP\n\ substr STRING POS LENGTH substring of STRING, POS counted from 1\n\ index STRING CHARS index in STRING where any CHARS is found, or 0\n\ length STRING length of STRING\n\ quote TOKEN interpret TOKEN as a string, even if it is a\n\ keyword like `match' or an operator like `/'\n\ \n\ ( EXPRESSION ) value of EXPRESSION\n", 52}, {"\ \n\ Beware that many operators need to be escaped or quoted for shells.\n\ Comparisons are arithmetic if both ARGs are numbers, else lexicographical.\n\ Pattern matches return the string matched between \\( and \\) or null; if\n\ \\( and \\) are not used, they return the number of characters matched or \ 0.\n", 53}, {"syntax error", 54}, {"\ warning: unportable BRE: `%s': using `^' as the first character\n\ of the basic regular expression is not portable; it is being ignored", 55}, {"\ Usage: %s [NUMBER]...\n\ or: %s OPTION\n", 56}, {"\ Print factors of each NUMBER; read standard input with no arguments.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n\ \n\ Print the prime factors of all specified integer NUMBERs. If no \ arguments\n\ are specified on the command line, they are read from standard input.\n", 57}, {"`%s' is not a valid positive integer", 58}, {"\ Usage: %s [ignored command line arguments]\n\ or: %s OPTION\n\ Exit with a status code indicating failure.\n\ \n\ These option names may not be abbreviated.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n", 59}, {"Usage: %s [-v]\n", 60}, {"\ Print the numeric identifier (in hexadecimal) for the current host.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n\ \n", 61}, {"\ Usage: %s [NAME]\n\ or: %s OPTION\n\ Print the hostname of the current system.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n", 62}, {"cannot set hostname to `%s'", 63}, {"cannot set hostname; this system lacks the functionality", 64}, {"cannot determine hostname", 65}, {"Usage: %s [OPTION]... [USERNAME]\n", 66}, {"\ Print information for USERNAME, or the current user.\n\ \n\ -a ignore, for compatibility with other versions\n\ -g, --group print only the group ID\n\ -G, --groups print only the supplementary groups\n\ -n, --name print a name instead of a number, for -ugG\n\ -r, --real print the real ID instead of effective ID, for -ugG\n\ -u, --user print only the user ID\n\ --help display this help and exit\n\ --version output version information and exit\n\ \n\ Without any OPTION, print some useful set of identified information.\n", 67}, {"cannot print only user and only group", 68}, {"cannot print only names or real IDs in default format", 69}, {"%s: No such user", 70}, {"cannot get supplemental group list", 71}, {" groups=", 72}, {"Usage: %s [OPTION]...\n", 73}, {"\ Print the name of the current user.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n", 74}, {"%s: no login name\n", 75}, {"Usage: %s [OPTION]... [COMMAND [ARG]...]\n", 76}, {"\ Run COMMAND with an adjusted scheduling priority.\n\ With no COMMAND, print the current scheduling priority. ADJUST is 10\n\ by default. Range goes from -20 (highest priority) to 19 (lowest).\n\ \n\ -ADJUST increment priority by ADJUST first\n\ -n, --adjustment=ADJUST same as -ADJUST\n\ --help display this help and exit\n\ --version output version information and exit\n", 77}, {"invalid option `%s'", 78}, {"invalid priority `%s'", 79}, {"a command must be given with an adjustment", 80}, {"cannot get priority", 81}, {"cannot set priority", 82}, {"Usage: %s [OPTION]... NAME...\n", 83}, {"\ Diagnose unportable constructs in NAME.\n\ \n\ -p, --portability check for all POSIX systems, not only this one\n\ --help display this help and exit\n\ --version output version information and exit\n", 84}, {"path `%s' contains nonportable character `%c'", 85}, {"`%s' is not a directory", 86}, {"directory `%s' is not searchable", 87}, {"name `%s' has length %d; exceeds limit of %d", 88}, {"path `%s' has length %d; exceeds limit of %d", 89}, {"Login name: ", 90}, {"In real life: ", 91}, {"???\n", 92}, {"Directory: ", 93}, {"Shell: ", 94}, {"Project: ", 95}, {"Plan:\n", 96}, {"Login", 97}, {" Name", 98}, {"TTY", 99}, {"Idle", 100}, {"When", 101}, {"Where", 102}, {"Usage: %s [OPTION]... [USER]...\n", 103}, {"\ \n\ -l do long format output\n\ -b omit the user's home directory and shell in long format\n\ -h omit the user's project file in long format\n\ -p omit the user's plan file in long format\n\ -s do short format output, this is the default\n\ -f omit the line of column headings in short format\n\ -w omit the user's full name in short format\n\ -i omit the user's full name and remote host in short format\n\ -q omit the user's full name, remote host and idle time\n\ in short format\n\ --help display this help and exit\n\ --version output version information and exit\n\ \n\ A lightweight `finger' program; print user information.\n\ The utmp file will be %s.\n", 104}, {"Usage: %s [OPTION]... [VARIABLE]...\n", 105}, {"\ If no environment VARIABLE specified, print them all.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n", 106}, {"\ warning: %s: character(s) following character constant have been ignored", 107}, {"\ Usage: %s FORMAT [ARGUMENT]...\n\ or: %s OPTION\n", 108}, {"\ Print ARGUMENT(s) according to FORMAT.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n\ \n\ FORMAT controls the output as in C printf. Interpreted sequences are:\n\ \n\ \\\" double quote\n\ \\0NNN character with octal value NNN (0 to 3 digits)\n\ \\\\ backslash\n\ \\a alert (BEL)\n\ \\b backspace\n\ \\c produce no further output\n\ \\f form feed\n\ \\n new line\n\ \\r carriage return\n\ \\t horizontal tab\n\ \\v vertical tab\n\ \\xNNN character with hexadecimal value NNN (1 to 3 digits)\n\ \n\ %%%% a single %%\n\ %%b ARGUMENT as a string with `\\' escapes interpreted\n\ \n\ and all C format specifications ending with one of diouxXfeEgGcs, with\n\ ARGUMENTs converted to proper type first. Variable widths are handled.\n", 109}, {"%s: expected a numeric value", 110}, {"%s: value not completely converted", 111}, {"missing hexadecimal number in escape", 112}, {"\\%c: invalid escape", 113}, {"%%%c: invalid directive", 114}, {"Usage: %s format [argument...]\n", 115}, {"warning: excess arguments have been ignored", 116}, {"Usage: %s [OPTION]\n", 117}, {"\ Print the full filename of the current working directory.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n", 118}, {"ignoring non-option arguments", 119}, {"cannot get current directory", 120}, {"\ Usage: %s [OPTION]... LAST\n\ or: %s [OPTION]... FIRST LAST\n\ or: %s [OPTION]... FIRST INCREMENT LAST\n", 121}, {"\ Print numbers from FIRST to LAST, in steps of INCREMENT.\n\ \n\ -f, --format FORMAT use printf(3) style FORMAT (default: %%g)\n\ -s, --separator STRING use STRING to separate numbers (default: \\n)\n\ -w, --equal-width equalize width by padding with leading zeroes\n\ --help display this help and exit\n\ --version output version information and exit\n\ \n\ If FIRST or INCREMENT is omitted, it defaults to 1.\n\ FIRST, INCREMENT, and LAST are interpreted as floating point values.\n\ INCREMENT should be positive if FIRST is smaller than LAST, and negative\n\ otherwise. When given, the FORMAT argument must contain exactly one of\n\ the printf-style, floating point output formats %%e, %%f, or %%g.\n", 122}, {"format string may not be specified when printing equal width strings", 123}, {"invalid format string: `%s'", 124}, {"invalid floating point argument: %s", 125}, {"\ when the starting value is larger than the limit,\n\ the increment must be negative", 126}, {"\ when the starting value is smaller than the limit,\n\ the increment must be positive", 127}, {"Usage: %s [OPTION]... NUMBER[SUFFIX]\n", 128}, {"\ Pause for NUMBER seconds.\n\ SUFFIX may be s to keep seconds, m for minutes, h for hours or d for days.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n", 129}, {"invalid time interval `%s'", 130}, {"\ Usage: %s [-F device] [--file=device] [SETTING]...\n\ or: %s [-F device] [--file=device] [-a|--all]\n\ or: %s [-F device] [--file=device] [-g|--save]\n", 131}, {"\ Print or change terminal characteristics.\n\ \n\ -a, --all print all current settings in human-readable form\n\ -g, --save print all current settings in a stty-readable form\n\ -F, --file open and use the specified device instead of stdin\n\ --help display this help and exit\n\ --version output version information and exit\n\ \n\ Optional - before SETTING indicates negation. An * marks non-POSIX\n\ settings. The underlying system defines which settings are available.\n", 132}, {"\ \n\ Special characters:\n\ * dsusp CHAR CHAR will send a terminal stop signal once input flushed\n\ eof CHAR CHAR will send an end of file (terminate the input)\n\ eol CHAR CHAR will end the line\n\ * eol2 CHAR alternate CHAR for ending the line\n\ erase CHAR CHAR will erase the last character typed\n\ intr CHAR CHAR will send an interrupt signal\n\ kill CHAR CHAR will erase the current line\n\ * lnext CHAR CHAR will enter the next character quoted\n\ quit CHAR CHAR will send a quit signal\n\ * rprnt CHAR CHAR will redraw the current line\n\ start CHAR CHAR will restart the output after stopping it\n\ stop CHAR CHAR will stop the output\n\ susp CHAR CHAR will send a terminal stop signal\n\ * swtch CHAR CHAR will switch to a different shell layer\n\ * werase CHAR CHAR will erase the last word typed\n", 133}, {"\ \n\ Special settings:\n\ N set the input and output speeds to N bauds\n\ * cols N tell the kernel that the terminal has N columns\n\ * columns N same as cols N\n\ ispeed N set the input speed to N\n\ * line N use line discipline N\n\ min N with -icanon, set N characters minimum for a completed read\n\ ospeed N set the output speed to N\n\ * rows N tell the kernel that the terminal has N rows\n\ * size print the number of rows and columns according to the \ kernel\n\ speed print the terminal speed\n\ time N with -icanon, set read timeout of N tenths of a second\n", 134}, {"\ \n\ Control settings:\n\ [-]clocal disable modem control signals\n\ [-]cread allow input to be received\n\ * [-]crtscts enable RTS/CTS handshaking\n\ csN set character size to N bits, N in [5..8]\n\ [-]cstopb use two stop bits per character (one with `-')\n\ [-]hup send a hangup signal when the last process closes the tty\n\ [-]hupcl same as [-]hup\n\ [-]parenb generate parity bit in output and expect parity bit in \ input\n\ [-]parodd set odd parity (even with `-')\n", 135}, {"\ \n\ Input settings:\n\ [-]brkint breaks cause an interrupt signal\n\ [-]icrnl translate carriage return to newline\n\ [-]ignbrk ignore break characters\n\ [-]igncr ignore carriage return\n\ [-]ignpar ignore characters with parity errors\n\ * [-]imaxbel beep and do not flush a full input buffer on a character\n\ [-]inlcr translate newline to carriage return\n\ [-]inpck enable input parity checking\n\ [-]istrip clear high (8th) bit of input characters\n\ * [-]iuclc translate uppercase characters to lowercase\n\ * [-]ixany let any character restart output, not only start character\n\ [-]ixoff enable sending of start/stop characters\n\ [-]ixon enable XON/XOFF flow control\n\ [-]parmrk mark parity errors (with a 255-0-character sequence)\n\ [-]tandem same as [-]ixoff\n", 136}, {"\ \n\ Output settings:\n\ * bsN backspace delay style, N in [0..1]\n\ * crN carriage return delay style, N in [0..3]\n\ * ffN form feed delay style, N in [0..1]\n\ * nlN newline delay style, N in [0..1]\n\ * [-]ocrnl translate carriage return to newline\n\ * [-]ofdel use delete characters for fill instead of null characters\n\ * [-]ofill use fill (padding) characters instead of timing for delays\n\ * [-]olcuc translate lowercase characters to uppercase\n\ * [-]onlcr translate newline to carriage return-newline\n\ * [-]onlret newline performs a carriage return\n\ * [-]onocr do not print carriage returns in the first column\n\ [-]opost postprocess output\n\ * tabN horizontal tab delay style, N in [0..3]\n\ * tabs same as tab0\n\ * -tabs same as tab3\n\ * vtN vertical tab delay style, N in [0..1]\n", 137}, {"\ \n\ Local settings:\n\ [-]crterase echo erase characters as backspace-space-backspace\n\ * crtkill kill all line by obeying the echoprt and echoe settings\n\ * -crtkill kill all line by obeying the echoctl and echok settings\n\ * [-]ctlecho echo control characters in hat notation (`^c')\n\ [-]echo echo input characters\n\ * [-]echoctl same as [-]ctlecho\n\ [-]echoe same as [-]crterase\n\ [-]echok echo a newline after a kill character\n\ * [-]echoke same as [-]crtkill\n\ [-]echonl echo newline even if not echoing other characters\n\ * [-]echoprt echo erased characters backward, between `\\' and '/'\n\ [-]icanon enable erase, kill, werase, and rprnt special characters\n\ [-]iexten enable non-POSIX special characters\n\ [-]isig enable interrupt, quit, and suspend special characters\n\ [-]noflsh disable flushing after interrupt and quit special \ characters\n\ * [-]prterase same as [-]echoprt\n\ * [-]tostop stop background jobs that try to write to the terminal\n\ * [-]xcase with icanon, escape with `\\' for uppercase characters\n", 138}, {"\ \n\ Combination settings:\n\ * [-]LCASE same as [-]lcase\n\ cbreak same as -icanon\n\ -cbreak same as icanon\n\ cooked same as brkint ignpar istrip icrnl ixon opost isig\n\ icanon, eof and eol characters to their default values\n\ -cooked same as raw\n\ crt same as echoe echoctl echoke\n\ dec same as echoe echoctl echoke -ixany intr ^c erase 0177\n\ kill ^u\n\ * [-]decctlq same as [-]ixany\n\ ek erase and kill characters to their default values\n\ evenp same as parenb -parodd cs7\n\ -evenp same as -parenb cs8\n\ * [-]lcase same as xcase iuclc olcuc\n\ litout same as -parenb -istrip -opost cs8\n\ -litout same as parenb istrip opost cs7\n\ nl same as -icrnl -onlcr\n\ -nl same as icrnl -inlcr -igncr onlcr -ocrnl -onlret\n\ oddp same as parenb parodd cs7\n\ -oddp same as -parenb cs8\n\ [-]parity same as [-]evenp\n\ pass8 same as -parenb -istrip cs8\n\ -pass8 same as parenb istrip cs7\n\ raw same as -ignbrk -brkint -ignpar -parmrk -inpck -istrip\n\ -inlcr -igncr -icrnl -ixon -ixoff -iuclc -ixany\n\ -imaxbel -opost -isig -icanon -xcase min 1 time 0\n\ -raw same as cooked\n\ sane same as cread -ignbrk brkint -inlcr -igncr icrnl\n\ -ixoff -iuclc -ixany imaxbel opost -olcuc -ocrnl onlcr\n\ -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0\n\ isig icanon iexten echo echoe echok -echonl -noflsh\n\ -xcase -tostop -echoprt echoctl echoke, all special\n\ characters to their default values.\n", 139}, {"\ \n\ Handle the tty line connected to standard input. Without arguments,\n\ prints baud rate, line discipline, and deviations from stty sane. In\n\ settings, CHAR is taken literally, or coded as in ^c, 0x37, 0177 or\n\ 127; special values ^- or undef used to disable special characters.\n", 140}, {"only one device may be specified", 141}, {"\ the options for verbose and stty-readable output styles are\n\ mutually exclusive", 142}, {"when specifying an output style, modes may not be set", 143}, {"%s: couldn't reset non-blocking mode", 144}, {"invalid argument `%s'", 145}, {"missing argument to `%s'", 146}, {"%s: unable to perform all requested operations", 147}, {"new_mode: mode\n", 148}, {"%s: no size information for this device", 149}, {"", 150}, {"invalid integer argument `%s'", 151}, {"virtual memory exhausted", 152}, {"Password:", 153}, {"getpass: cannot open /dev/tty", 154}, {"cannot set groups", 155}, {"cannot set group id", 156}, {"cannot set user id", 157}, {"cannot run %s", 158}, {"Usage: %s [OPTION]... [-] [USER [ARG]...]\n", 159}, {"\ Change the effective user id and group id to that of USER.\n\ \n\ -, -l, --login make the shell a login shell\n\ -c, --commmand=COMMAND pass a single COMMAND to the shell with -c\n\ -f, --fast pass -f to the shell (for csh or tcsh)\n\ -m, --preserve-environment do not reset environment variables\n\ -p same as -m\n\ -s, --shell=SHELL run SHELL if /etc/shells allows it\n\ --help display this help and exit\n\ --version output version information and exit\n\ \n\ A mere - implies -l. If USER not given, assume root.\n", 160}, {"user %s does not exist", 161}, {"incorrect password", 162}, {"using restricted shell %s", 163}, {"warning: cannot change directory to %s", 164}, {"Usage: %s [OPTION]... [FILE]...\n", 165}, {"\ Copy standard input to each FILE, and also to standard output.\n\ \n\ -a, --append append to the given FILEs, do not overwrite\n\ -i, --ignore-interrupts ignore interrupt signals\n\ --help display this help and exit\n\ --version output version information and exit\n", 166}, {"standard output", 167}, {"read error", 168}, {"argument expected\n", 169}, {"integer expression expected %s\n", 170}, {"')' expected\n", 171}, {"')' expected, found %s\n", 172}, {"%s: unary operator expected\n", 173}, {"%s: binary operator expected\n", 174}, {"before -lt", 175}, {"after -lt", 176}, {"before -le", 177}, {"after -le", 178}, {"before -gt", 179}, {"after -gt", 180}, {"before -ge", 181}, {"after -ge", 182}, {"-nt does not accept -l\n", 183}, {"before -ne", 184}, {"after -ne", 185}, {"before -eq", 186}, {"after -eq", 187}, {"-ef does not accept -l\n", 188}, {"unknown binary operator", 189}, {"after -t", 190}, {"\ Usage: %s EXPRESSION\n\ or: [ EXPRESSION ]\n\ or: %s OPTION\n", 191}, {"\ Exit with the status determined by EXPRESSION.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n\ \n\ EXPRESSION is true or false and sets exit status. It is one of:\n", 192}, {"\ \n\ ( EXPRESSION ) EXPRESSION is true\n\ ! EXPRESSION EXPRESSION is false\n\ EXPRESSION1 -a EXPRESSION2 both EXPRESSION1 and EXPRESSION2 are true\n\ EXPRESSION1 -o EXPRESSION2 either EXPRESSION1 or EXPRESSION2 is true\n\ \n\ [-n] STRING the length of STRING is nonzero\n\ -z STRING the length of STRING is zero\n\ STRING1 = STRING2 the strings are equal\n\ STRING1 != STRING2 the strings are not equal\n\ \n\ INTEGER1 -eq INTEGER2 INTEGER1 is equal to INTEGER2\n\ INTEGER1 -ge INTEGER2 INTEGER1 is greater than or equal to INTEGER2\n\ INTEGER1 -gt INTEGER2 INTEGER1 is greater than INTEGER2\n\ INTEGER1 -le INTEGER2 INTEGER1 is less than or equal to INTEGER2\n\ INTEGER1 -lt INTEGER2 INTEGER1 is less than INTEGER2\n\ INTEGER1 -ne INTEGER2 INTEGER1 is not equal to INTEGER2\n", 193}, {"\ \n\ FILE1 -ef FILE2 FILE1 and FILE2 have the same device and inode numbers\n\ FILE1 -nt FILE2 FILE1 is newer (modification date) than FILE2\n\ FILE1 -ot FILE2 FILE1 is older than FILE2\n\ \n\ -b FILE FILE exists and is block special\n\ -c FILE FILE exists and is character special\n\ -d FILE FILE exists and is a directory\n\ -e FILE FILE exists\n\ -f FILE FILE exists and is a regular file\n\ -g FILE FILE exists and is set-group-ID\n\ -G FILE FILE exists and is owned by the effective group ID\n\ -k FILE FILE exists and has its sticky bit set\n\ -L FILE FILE exists and is a symbolic link\n\ -O FILE FILE exists and is owned by the effective user ID\n\ -p FILE FILE exists and is a named pipe\n\ -r FILE FILE exists and is readable\n\ -s FILE FILE exists and has a size greater than zero\n\ -S FILE FILE exists and is a socket\n\ -t [FD] file descriptor FD (stdout by default) is opened on a \ terminal\n\ -u FILE FILE exists and its set-user-ID bit is set\n\ -w FILE FILE exists and is writable\n\ -x FILE FILE exists and is executable\n", 194}, {"\ \n\ Beware that parentheses need to be escaped (e.g., by backslashes) for \ shells.\n\ INTEGER may also be -l STRING, which evaluates to the length of STRING.\n", 195}, {"missing `]'\n", 196}, {"too many arguments\n", 197}, {"\ Usage: %s [ignored command line arguments]\n\ or: %s OPTION\n\ Exit with a status code indicating success.\n\ \n\ These option names may not be abbreviated.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n", 198}, {"\ Print the file name of the terminal connected to standard input.\n\ \n\ -s, --silent, --quiet print nothing, only return an exit status\n\ --help display this help and exit\n\ --version output version information and exit\n", 199}, {"not a tty", 200}, {"\ Print certain system information. With no OPTION, same as -s.\n\ \n\ -a, --all print all information\n\ -m, --machine print the machine (hardware) type\n\ -n, --nodename print the machine's network node hostname\n\ -r, --release print the operating system release\n\ -s, --sysname print the operating system name\n\ -p, --processor print the host processor type\n\ -v print the operating system version\n\ --help display this help and exit\n\ --version output version information and exit\n", 201}, {"cannot get system name", 202}, {"cannot get processor type", 203}, {"couldn't get boot time", 204}, {" %2d:%02d%s up ", 205}, {"am", 206}, {"pm", 207}, {"day", 208}, {"days", 209}, {"user", 210}, {"users", 211}, {", load average: %.2f", 212}, {"Usage: %s [OPTION]... [ FILE ]\n", 213}, {"\ Print the current time, the length of time the system has been up,\n\ the number of users on the system, and the average number of jobs\n\ in the run queue over the last 1, 5 and 15 minutes.\n\ If FILE is not specified, use %s. %s as FILE is common.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n", 214}, {"\ Output who is currently logged in according to FILE.\n\ If FILE is not specified, use %s. %s as FILE is common.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n", 215}, {" old ", 216}, {"\ \n\ # users=%u\n", 217}, {"USER", 218}, {"MESG ", 219}, {"LINE", 220}, {"LOGIN-TIME ", 221}, {"IDLE ", 222}, {"FROM\n", 223}, {"Usage: %s [OPTION]... [ FILE | ARG1 ARG2 ]\n", 224}, {"\ \n\ -H, --heading print line of column headings\n\ -i, -u, --idle add user idle time as HOURS:MINUTES, . or old\n\ -l, --lookup attempt to canonicalize hostnames via DNS\n\ -m only hostname and user associated with stdin\n\ -q, --count all login names and number of users logged on\n\ -s (ignored)\n\ -T, -w, --mesg add user's message status as +, - or ?\n\ --message same as -T\n\ --writable same as -T\n\ --help display this help and exit\n\ --version output version information and exit\n\ \n\ If FILE is not specified, use %s. %s as FILE is common.\n\ If ARG1 ARG2 given, -m presumed: `am i' or `mom likes' are usual.\n", 225}, {"\ Print the user name associated with the current effective user id.\n\ Same as id -un.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n", 226}, {"%s: cannot find username for UID %u\n", 227}, {"\ Repeatedly output a line with all specified STRING(s), or `y'.\n\ \n\ --help display this help and exit\n\ --version output version information and exit\n", 228}, }; int _msg_tbl_length = 228;