Short: SNES Emulator for PowerPC (WarpUP) V3.5a Author: MagicSN@Birdland.es.bawue.de (Amiga Port), chinoclast@softhome.net (Sound Code), Jeremy Koot and Gary Henderson (original Unix Version) Uploader: MagicSN@Birdland.es.bawue.de Type: misc/emu New in V3.5a - No crashes on exit anymore with sound enabled (V3.5 sometimes crashed on exit if sound enabled, i found the bug and fixed it). Else no changes in this version. New in V3.5: - Sound Support !!! Options for AHI-Sound: -nosound: Switch off Sound (Default: Sound is on) -soundskip: values 0-3, only if sound is disabled -soundquality: 0 - off 1 - 8192 2 - 11025 3 - 16500 4 - 22050 (default) 5 - 29300 6 - 33600 7 - 44000 Try a bit around what produces the best output !!! Also try around with your AHI settings. Usually GOOD is: * Paula = Set frequency as high as possible * Sound Board = Set frequency to EXACTLY the one set in soundquality, for example 22050 If the sound jerks, play around with the settings !!! -stereo (default) -mono -buffersize: 4096-32768 (default: 16384) (Try playing around with this too... i think the default gives the best results) Important note to owners of Soundboards: Appearently it does not work nice with Soundboard (at least not with my Prelude). It only jerks. The same happens when i use my Soundboard with Abuse 68k. I do not know if the hardware or the AHI Driver is the problem. There exists a -prelude Parameter for Prelude native sound. Not sure if it will make it into the first sound-supporting version already, but there will be an update of WarpSNES soon. Hopyfully then it will also sound good on Prelude. The next version hopefully will also support SNES9x 1.18e changes. But i wanted to finish sound-support first !!! New in last version: - Removed the AGA Speedup again, as it was incompatible with some games (actually a LOT of games). These games then only crashed, even if called on a GFX Board Screen. I now provided two versions of the executable, WarpSNES without the AGA speedup, WarpSNES.old with it (but not all games run on WarpSNES.old). WarpSNES is V3.4, WarpSNES.old is V3.3. New in last version: - Major speedup for AGA (thanks to the author of SNES9xPPC for hints) Note: For optimal speed it is still recommended to use a CD32 Joypad. Keyboard controls are rather slow. But AGA display now runs at 80% of GFX Board Display. - Now also works on systems without TCP/IP Stack installed (actually removed TCP/IP part, as it still was not working... will reinsert it later... now back to try to make the sound working :) ) New in last version: - Adapted Sources to new-released SNES9x 1.10 (which means mainly that the DSP Emulation improved so that more games run now, MarioKart *nearly* runs fine now) - Changed Joypad Buttons, so that they come closer to the real SNES - -minimal option added to switch of keyboard code with exception of ESC (did not give much of a speedup, though) - Network Support of 1.10 SNES9x (Untested, might not work) - No unzip support of 1.10 SNES9x (but gzip Support works like always) - Sound still does not work, sorry, also no ASM Optimizations yet... (maybe next version...). If anybody has an idea about the sound, contact me :) - fps should now show the real value for frameskip - added a 4th GUI sent to me by the author, Johan Lundell (ghwerig@home.se). Thanks for the Support :) - Last version: - frameskip now works. Note: the fps counter will show the Frames Displayed / second So the number will be much lower than your gaming feeling. Somehow i am not sure if the number is displayed correct. If i do -f 0 i get 36 fps, if i do -f 2 i get 15 fps, but the 15 fps of -f 2 are definitely faster than the 36 fps :) The 36 fps are correctly calculated however... somehow measuring goes strange when frameskip is enabled... as the result looks much more like 50 fps than like 15 fps... Use -f 0 to play with every frame displayed. - Included a new version of SNES9xgui - Included wsl GUI which by mistake was not included last time (instead theguis.lha included an old version of WarpSNES last time... shame on me :) ) New in last versions: - Lots of bugfixes - If Subdirectory Snapshots exists, saving works - Added 3 GUI's sent to me by different people. Use the one you like best :) Thanks to Andreas Falkenhahn, Rune J. Keller and Sinan Gurkan for the GUI's (personally i prefer snes9xgui from Andreas Falkenhahn) - Note about the GUIs: The GUI of Andreas Falkenhahn sets the name of the Emulator (it works with both WarpSNES and SNES9x for 68k) in a Tooltype. The GUI of Sinan Gurkan assumes the name to be WarpSNES, the GUI of Rune J. Keller enables the user to choose a name. - Another note: Even if Andreas' GUI display's .zip'ed files, WarpSNES does not run these. It can run gzip, not zip !!! That was a misunderstanding between me and Andreas, hopefully fixed in the next version of the GUI :) - BTW: WarpSNES now also runs .fig format, not only .smc !!! - 15/16 Bit for *all* GFX Boards with WORKING Transparency effects - Mousepointer is switched off during the game runs - Still no sound, sadly. Hopefully next version :) Notes: - -speedhack gives 1-2 extra fps, but does not work with all games - as long as sound does not work -nosound is also useful, gives 3-4 extra fps normally - 16 Bit looks much better than 15 Bit, and is not slower - 256*256 Screenmodes enable a special optimization that gives 1 extra fps - 15/16 Bit is only recommended for PPC 604e + Zorro III Boards, it really pushes your system to its limits (on my system Earthworm Jim runs with -speedhack -nosound on a 256*256 16 Bit Mode - RGB16PC - at around 24-25 fps... probably on a GFX Board without Byte-Swapping 16 Bit is faster...) - Byteswapping for 15/16 Bit is MUCH optimized. If anyone thinks he can do better, contact me :) A piece of code to load 8 Bytes at once from memory, Byteswap them and store them to memory, using lfdu/stfdu, would be nice... currently i am using "4-Bytes at once". New in the last version: - "Wrong-Colors-Bug" of the first version (the colors looked dull at best) fixed. - Experimental 16 Bit Support integrated. Transparency currently lets things look in very strange colors (Transparency can be toggled on/off by pressing F10). 16 Bit currently only works on GFX Boards with RGB16PC GFX Modes (for example Picasso IV or Piccolo SD64). I do NOT guarantee that you won't get crashes in 16 Bit mode, activate it with -hicolor. - stretch currently does not work (but why anyways, on Amiga you can do a screenmode the size that you get Fullscreen !!!) - hires support added (activate it with -hires) - snes: assign is not needed anymore - Loading of Compressed Files is now supported (use gzip to pack an Image File, gzip should be on Aminet, and no, gzip is NOT the same like zip !!!) The loading of the packed image files is very fast, as it is PPC Boosted :) You then don't need the depacked images anymore on your harddrive. The Emulator depacks them to RAM and starts them... :) Thanks to zlib... If ANYBODY has an idea why 16 Bit stuff looks that strange, please tell me !!! I will then add the 16 Bit support for the other GFX Boards, also... hopefully the next versionwill also have sound-support. I also hope that till the next version Phase 5 have ruled out the problems with their A1200-FlashROM-Software. BTW: Remember to raise the stack to a higher value. WarpSNES Documentation ====================== Games reported to run/not to run: --------------------------------- Game Runs ? Hardware fps ---- ------ -------- --- Earthworm Jim yes 150 MHz 604e + Picasso IV 27 R-Type III yes 150 MHz 604e + Picasso IV 32 Mariokarts no 150 MHz 604e + Picasso IV -- Ranma 1/2 yes 150 MHz 604e + Picasso IV 30 Uniracers yes 150 MHz 604e + Picasso IV 28 Final Fantasy 5 yes 150 MHz 604e + Picasso IV 32 For the AGA users among us, i did also some AGA tests. Earthworm Jim yes 150 MHz 604e + AGA 21 R-Type III yes 150 MHz 604e + AGA 23 WarpSNES is the first SNES Emulator for the PowerPC. It is really fast. WarpSNES needs WarpUP V12 and the rtgmaster.library to run. If you want Joystick/Joypad Support, you should also have the lowlevel.library. An assign snes: has to exist. WarpSNES bases on the great SNES9x code by Jeremy Koot and Gary Henderson. At this place the copyright notice: /* * Snes9x - Portable Super Nintendo Entertainment System (TM) emulator. * * (c) Copyright 1996, 1997, 1998 Gary Henderson (gary@daniver.demon.co.uk) and * Jerremy Koot (jkoot@euronet.nl) * * Super FX C emulator code * (c) Copyright 1997, 1998 Lestat (lstat@hotmail.com) and * Gary Henderson. * Super FX assembler emulator code (c) Copyright 1998 zsKnight and _Demo_. * * DSP1 emulator code (c) Copyright 1998 Lestat and Gary Henderson. * DOS port code contains the works of other authors. See headers in * individual files. * * Permission to use, copy, modify and distribute Snes9x in both binary and * source form, for non-commercial purposes, is hereby granted without fee, * providing that this license information and copyright notice appear with * all copies and any derived work. * * This software is provided 'as-is', without any express or implied * warranty. In no event shall the authors be held liable for any damages * arising from the use of this software. * * Snes9x is freeware for PERSONAL USE only. Commercial users should * seek permission of the copyright holders first. Commercial use includes * charging money for Snes9x or software derived from Snes9x. * * The copyright holders request that bug fixes and improvements to the code * should be forwarded to them so everyone can benefit from the modifications * in future versions. * * Super NES and Super Nintendo Entertainment System are trademarks of * Nintendo Co., Limited and its subsidiary companies. WarpSNES is AFAIK the first Amiga-port of SNES9x, and it is for PowerPC and damned fast !!! :) And before someone asks: I know that the latest Flashrom Update for BlizzardPPC has problems with WarpUP. But this is not my problem, it is the problem of Phase 5. They should fix it. As long as it is not fixed i can only recommend NOT to update the FlashROM if you did not do it already and wait for a bugfixed version (the latest FlashROM has not only problems with WarpUP, but also with MUI and other things, so it is NOT recommended). Now we come to the more detailed docs: WarpSNES does not (yet...) support : - Sound - Emulation of SNES Mouse - timing correction If someone could help me with SNES Sound-Stuff (a coder of a 68k SNES Emulator maybe...), simply contact me. Also if you think you can do a nice GUI for it, contact me... at MagicSN@Birdland.es.bawue.de... WarpSNES will get better versions later... It has to be said, that i only can recommend using a CD32 Pad with this emulation. The keyboard movement sucks IMHO (you can't press several keys at the same time !!!) Play it with the CD32 Pad for the correct Console-Feeling... The movement: (Controller always means that you also can get this function by using a CD32 Controller instead of pressing a key...). I tried to stay as close as possible with the original SNES9x controls. A lot of functions are available on several keys. Controller 1: - cursor right or controller => Right - cursor left or controller => Left - cursor up or controller => Up - cursor down or controller => Down - Keypad Enter or controller "Play" => Start - Keypad Plus => Select - Insert or Controller => TL - Remove or Controller => TR - Home or Controller => X - End or Controller => Y - Pageup or Controller => A - Pagedown or Controller => B Controller 2: - K, Cursorblockright, Controller => Right - H, Cursorblockleft, Controller => Left - N,J,Cursorblockdown, Controller => Down - U,Cursorblockup,Controller => Up - Return, Controller => Start - Space => Select - A,V,Q,Controller => TL - Z,B,W,Controller => TR - S,M,E,Controller => X - X,,,R,Controller => Y - D,.,T,Controller => A - C,\,Y,Controller => B - 1-5: No idea what this does, but something... ("BG_Forced") - 0: Disable HDMA - 8: Toggle BGLayering - 6: Swap Joypads - Backspace: Toggle DisableGraphicWindows - P: Pause - <: Something with frame-skip, probably does not yet have an effect - +: "" - left alt+f2 or del => load snapshot - left alt+f3 or help => save snapshot New options not in the original Unix Version: -nosecondjoy disables second joypad for less contextswitches -showfps shows the fps rate on the game screen ============================= Archive contents ============================= Original Packed Ratio Date Time Name -------- ------- ----- --------- -------- ------------- 40196 15957 60.3% 14-Oct-98 01:41:12 CHANGES 1575 752 52.2% 14-Oct-98 01:41:12 COPYRIGHT 9365 9365 0.0% 14-Oct-98 19:11:48 gui4.lha 1072 606 43.4% 20-Mar-99 22:43:02 PPC.notes 19065 7858 58.7% 14-Oct-98 01:41:12 PROBLEMS 34601 14206 58.9% 14-Oct-98 01:41:12 README.TXT 42188 42188 0.0% 20-Mar-99 22:47:36 SNES9xGUI1_9.lha 195 149 23.5% 20-Mar-99 22:47:12 SNES9xGUI1_9.readme 14418 14418 0.0% 21-Mar-99 20:00:20 SNESLauncher.lha 1656 905 45.3% 20-Mar-99 22:38:04 Sound.notes 1821432 165910 90.8% 21-Jun-99 18:15:32 WarpSNES 13204 5823 55.8% 21-Jun-99 18:16:50 WarpSNES.readme 47018 47018 0.0% 26-Aug-98 00:17:46 wsl.lha -------- ------- ----- --------- -------- 2045985 325155 84.1% 22-Jun-99 19:42:28 13 files