Short: V2.2 Microtek/Highscreen/Mustek scanner driver Author: wzoehner@nuernberg.netsurf.de Uploader: wzoehner@nuernberg.netsurf.de Version: 2.2 Type: hard/drivr ScanTek 2.2 A scanner driver for Microtek, Highscreen and some Mustek Flatbed Scanner © Copyright 1995/1996 Waldemar Zöhner Get It, Feel It, Love It The ScanTek scanner driver has the following features: 1. Support of the following SCSI Microtek scanner models: MICROTEK IISP, MICROTEK II, HIGHSCREEN Flatbed Color IIs, ScanMaker E3, ScanMaker 35t Support of the following SCSI Mustek scanner models: 6000CX 8000CX (not tested) 12000CX (not tested) Other Mustek scanners are not supported, because they have a different firmware software. If your scanner is not mentioned in the list above try it and give me a response if it works or not. Attention: Mustek scanners have a critical SCSI interface. It was reported to me that these scanners may not work with the A3000(T) internal SCSI interface. It is possible that these scanners do not work with other SCSI host adapters, either. But the Mustek 6000CX works in combination with an Oktagon SCSI host adapter. 2. Support of black/white, built-in halftone (dither), one-pass-color-scan, three pass color scan, grey, red, green and blue scan. 3. Individual setting of resolution, scanning frame, contrast, shadow, midtone, highlight, exposure time and scanning speed for download to the scanner. 4. Download of a color look up table (gamma correction table ) to the scanner supported. 5. Scanning to IFF File of 1, 8 or 24 bit color depth. The maximum size of the scanned image is independent from the RAM size. After the scanning process it is possible to start an external program. 6. GUI for preview and configuration of the driver. You need Kickstart 2.04 or higher. 7. Sizeable preview window in black/white or grey scale. There are much more skilled programs to view and manipulate the scanned images in color. (A tool like ADPRO, IMAGE FX or so is needed, if you want to do sophisticated postproduction) 8. Screenmode requester to define screen for working. 9. Configurable SCSI device and SCSI ID. ( Yes, the driver supports only SCSI connectable Microtek scanners. This is not rather bad, since I do not know of any NON-SCSI scanner from Microtek). 10. The driver is tested with the following SCSI drivers: oktagon.device and gvpscsi.device V4.5. 11. ScanTek is written using SAS C 6.55. 11. ScanTek is SHAREWARE. 12. The non registered version of ScanTek is a full working version but all scanned images have black lines to motivate you to register. History: V1.0 30 Nov. 1995 - first public release V1.1 17 Dec. 1995 - detection of Microtek scanner via SCSI inquiry enhanced - stepping of resolution slider adapted to expanded base resolution - calculation of scanning frame size data modified V1.2 3 Jan. 1996 - Debug output data revised and enhanced - Max Frame Setting setting introduced - Start of external program possible - Window positions are remembered and saved - Configuration file enhanced V1.3 25 Feb. 1996 - Detection of new ScanMaker E3 Flatbed scanner implemented - Special adaption for E3 to use 8.5 * 13.5 inch scanning frame (due to E3 inquiry data the max frame size is 8.5 * 11.69 inch) - No start of the external program, if the scanning process is aborted - Higher dpi rates for ScanMaker 35t (slide scanner) possible Preview image schould look better now. - "Main Control" window and gadgets modified - Debug filename "ScanTek.log" can be overriden through CLI or Tooltype V2.0 30 Apr. 1996 - Preview in color mode with proper options values - Use of expanded Contrast and Exposure Time selections on certain scanners - X and Y Aspect Ratio in scanned color images is now correct - ScanMaker E3 does not support undocumentated red, gree and blue scanning - Lookup Table command supported (Gamma Correction on certain scanner possible) - Scanning Frame Setting is now more intuitive - Reverse image scanning supported (only on certain scanners possible) - Accurate scanning frame definition. Scanning frame is now more precise. V2.1 5 July 1996 - Preview now fully supported for Mustek 6000CX - Special adaption for Mustek 6000CX to use 8.5 * 14 inch scanning frame V2.2 26 July 1996 - Enhanced support for Mustek scanners "Exposure Time" and "Contrast" parameters are now correct - Gamma value "All" now works on threepass scanner - Alternative Black/White scanning mode ============================= Archive contents ============================= Original Packed Ratio Date Time Name -------- ------- ----- --------- -------- ------------- 1188 539 54.6% 27-May-96 20:29:42 Scantek.info 1475 518 64.8% 27-May-96 19:27:28 +Bestellformular 1391 504 63.7% 27-May-96 20:29:42 +Bestellformular.info 1233 780 36.7% 27-May-96 20:29:42 +Gamma.info 63 63 0.0% 27-May-96 19:17:08 +descript 1233 778 36.9% 27-May-96 20:29:42 +Images.info 39 39 0.0% 23-Nov-95 23:51:06 +descript 1407 461 67.2% 27-May-96 19:32:40 +OrderForm 1391 505 63.6% 27-May-96 20:29:42 +OrderForm.info 4770 2044 57.1% 28-Jul-96 09:23:40 +ReadMe 1391 503 63.8% 27-May-96 20:29:42 +ReadMe.info 149904 65330 56.4% 30-Jul-96 23:17:06 +ScanTek 49770 15167 69.5% 30-Jul-96 22:33:26 +ScanTek.guide 1866 1348 27.7% 27-May-96 20:29:42 +ScanTek.guide.info 1589 858 46.0% 30-Jul-96 23:25:00 +ScanTek.info 30 30 0.0% 23-Nov-95 23:50:00 +descript -------- ------- ----- --------- -------- 218740 89467 59.0% 31-Jul-96 21:41:02 16 files