// defines for askmsg->flags for CONTROL program
#define ASK_BBSGLOBAL 1

// defines for askmsg->flags for NODE program
#define ASK_STATUS 20


// error messages for HBBS_LogError()

#define ERR_NO_ERROR 0
#define ERR_ERROR_OPENING 1
#define ERR_ERROR_READING 2
#define ERR_ERROR_WRITING 3
#define ERR_GENERAL 4
#define ERR_NODESETTINGS 5
#define ERR_DOORTIMEOUT 6

// if ya change any of the errors here don't forget to update the array
// of error msg strings in errors.h

#define TYPE_NONE 0
#define TYPE_FATAL 1
#define TYPE_CRITICAL 2
#define TYPE_IMPORTANT 3
#define TYPE_WARNING 4
#define TYPE_DONTCARE 5

#define TYPE_MEMORY 6 // a bit different to the above types...

#define BIG_STR 1024 // ppplenty long enough.. and just to be on the (very) safe
                     // side of long sprintf's :-)

#define VTYPE_TIME 1
#define VTYPE_SMALLNUM 2
#define VTYPE_BIGNUM 3
#define VTYPE_STRING 4
#define VTYPE_BOOL 5
#define VTYPE_STRINGLIST 6
#define VTYPE_FLAGS 7
#define VTYPE_PATH 8
#define VTYPE_PATHLIST 9
#define VTYPE_WORD 10
#define VTYPE_DATE 11

#define OPT_SINGLE 0
#define OPT_MULTI 1

// possible node status's

#define STAT_CLOSED 0
#define STAT_LOADING 1
#define STAT_INITIALIZING 2
#define STAT_READY 3
#define STAT_ONLINE 4
#define STAT_CLOSING 5

// gets sent to Node Program when you want a node to shutdown..

#define STAT_REQUESTCLOSE 6

// send to node program if you want it to open or close it's window (NOT UserScreen tho!, just the node control window)
#define STAT_OPENWINDOW 7
#define STAT_CLOSEWINDOW 8
// send to node program if you want it to open or close it's UserScreen
#define STAT_OPENSCREEN 9
#define STAT_CLOSESCREEN 10

// login types..

#define LOGIN_NONE   0
#define LOGIN_REMOTE 1
#define LOGIN_LOCAL  2

// possible flags for displaying information in the ctrl window's status bar!

#define UPD_NODESTATUS 1

// define some string lengths

#define LEN_NODESTATNAME  10
#define LEN_CURRENTLINE   1024  // should be PLENTY..
#define LEN_MAXDOORRETURN 255
#define LEN_DATESTR       12 // DD-MMM-YYYY + Terminator
#define LEN_TIMESTR       9 // HH:MM:SS + Terminator

// defines for request message types

#define REQ_UPDATEINFO 1 // tells control program to update the currently displayed
                         // list above the Information gadget (callers/dls/ul's....)


// message types

//#define mtype_ASK 1
#define mtype_STATUS 2
#define mtype_DOORACTIVITY 3
#define mtype_DOORIO 4
#define mtype_REQUEST 5
#define mtype_CHECK 6

// door status message types..

#define DMSG_DOORSTARTED 1
#define DMSG_DOORFINISHED 2

// door io message types

#define DOORIO_WRITECONSTR          1
#define DOORIO_WRITECONDATA         2
#define DOORIO_WRITESERSTR          3
#define DOORIO_WRITESERDATA         4
#define DOORIO_WRITESTR             5
#define DOORIO_GETLINE              6
#define DOORIO_SYSTEMDOOR           7
#define DOORIO_USERDOOR             8
#define DOORIO_HANGUP               9
#define DOORIO_DISPLAYSCREEN        10
#define DOORIO_DISPLAYSPECIALSCREEN 11
#define DOORIO_PAUSEPROMPT          12
#define DOORIO_ADDLASTUPLOAD        13
#define DOORIO_CONTINUEPROMPT       14
#define DOORIO_MENUPROMPT           15

// getline flags!

#define GL_NONE      0   // default
#define GL_HISTORY   1   // if set history is enabled (up/down cursor keys)
#define GL_LINEWRAP  2   // if maxlen is reached then data back to the last ' ' character is copied to N_ND->CurrentLineWrap and returns immediately
#define GL_IMMEDIATE 4   // returns when maxlen is reached
#define GL_NORETURN  8   // does not print a cr+lf when a) reached maxlen or b) timeout or c) return press
#define GL_EDIT      16  // enables cursor left/right and backspace/delete
#define GL_DISPLAY   32  // display chars (don't specify for "Press [return] to contine" type prompts)
#define GL_SYSOP     64  // does not write to, or read from, the serial port
#define GL_USECHARS  128 // see N_ND->CharsAllowed
#define GL_NOBEEP    256 // use with GL_USECHARS if you don't want a beep when
                         // the presses a key not in N_ND->CharsAllowed
#define GL_NOOLM     512 // (No OLM) if set olm's will not inturrpt the user

// pass this to LoadNodeDataSettings if you want the hbbs:nodes/nodeglobal file

#define NODE_GLOBAL 200000

#define IN_CONSOLE 1
#define IN_SERIAL 2

#define GET_ANYWHERE 0
#define GET_SERIAL 1
#define GET_CONSOLE 2

#define DEF_CONBUFLEN 2048  // default lenghts used to allocate NodeData->ConBuffer
#define DEF_SERBUFLEN 2048  // default lenghts used to allocate NodeData->SerBuffer
  // note: these may be reallocated by the program to a different length,
  // so check NodeData->Con/SerBufferLen for actual current length!

#define IN_NOTHING 0       // (reserved)

#define IN_GOTLINE 1       // returned if function actually got a line of
                           // text
#define IN_LOSSCARRIER 2   // retuned only if N_ND->Logintype!=LOGIN_NONE
                           // or sysop logged user off! :-)
#define IN_LOGIN 3         // returned if N_ND->LoginType==LOGIN_NONE and
                           // sysop wants to local login
#define IN_SHUTDOWN 4      // will never be returned to a door,
                           // only to AwaitConnect();
                           // due the the fact that N_ND->RequestShutdown can only
                           // be set if there's no user online and therefore
                           // no door can be running!
#define IN_IMMEDIATE 5

#define IN_TERMINAL 6

#define IN_TIMEOUT 7

#define IN_ENDCHAT 8

#define IN_DISPLAYAWAIT 9  // if sysop presses F4 at await connect prompt you'll get this..


#define DEF_WINSIG         (1L << NodeWnd->UserPort->mp_SigBit)
#define DEF_CONWINSIG      (1L << N_ND->ConWin->UserPort->mp_SigBit)
#define DEF_INFOWINSIG     (1L << InfoWin->UserPort->mp_SigBit)
#define DEF_SETTINGSWINSIG (1L << SettingsWin->UserPort->mp_SigBit)
#define DEF_CONSIG         (1L << N_ND->ConRPort->mp_SigBit)
#define DEF_SERSIG         (1L << N_ND->SerPort->mp_SigBit)
#define DEF_PORTSIG        (1L << N_ND->NodePort->mp_SigBit)
#define DEF_TIMERSIG       (1L << N_ND->NodeTimer->TimerPort->mp_SigBit)

// the lengths of the strings in the user data file..

// update user editor GUI string max chars values if you modify these..

#define LEN_HANDLE         25
#define LEN_REALNAME       30
#define LEN_GROUP          30
#define LEN_GEOLOCATION    20
#define LEN_COUNTRY        20
#define LEN_PHONENUMBER    20
#define LEN_PASSWORD       20
#define LEN_COMPUTERTYPE   40
#define LEN_SENTBY         48
#define LEN_TIMEACCESS     32 // same as max filename length!
#define LEN_CONFACCESSFILE 32
#define LEN_LEECHACCESSFILE 32
#define MAX_ACCESSSETTINGS        4096       // 4k is not unreasonably large..
                                             // nor to small..  think about it,
                                             // are we really going to have
                                             // 4096 access flags ??

// tells node what to update..

#define UPD_NAME     1
#define UPD_GROUP    2
#define UPD_ACTION   3
#define UPD_CPSBAUD  4

// string lengths for action

#define MAX_ACTION_LEN 29
#define MAX_CPSBAUD_LEN 8
#define MAX_GROUP_LEN 20
#define MAX_NAME_LEN 20

#define TIMEOUT_DOORLOAD 10 // ten seconds..


#define OS_ONLINE TRUE
#define OS_OFFLINE FALSE

// flags for UserData->Status

#define USER_NEW          'N'
#define USER_VALIDATED    'V'
#define USER_DELETED      'D'
#define USER_INACTIVE     'I'
#define USER_LOGINSDENIED 'L'
#define USER_OVERWRITABLE 'O'


// screen names,  use these when calling DOOR_DisplaySpecialScreen()

#define SSCREEN_PRIVATESYSTEM "PRIVATESYSTEM"
#define SSCREEN_PRIVATENODE "PRIVATENODE"
#define SSCREEN_BBSTITLE "BBSTITLE"
#define SSCREEN_NONEWAT_ALL "NONEWAT_ALL"
#define SSCREEN_NONEWAT_THISTIME "NONEWAT_THISTIME"
#define SSCREEN_GUESTLOGIN "GUESTLOGIN"
#define SSCREEN_JOINED "JOINED"
#define SSCREEN_LOGINLOGO "LOGINLOGO"
#define SSCREEN_BULLETIN "BULLETIN"
#define SSCREEN_CONFBULLETIN "CONFBULLETIN"

// user level types..

#define USERTYPE_NORMAL 'N'
#define USERTYPE_EXPERT 'X'

// protocol directional types

#define PTYPE_UNIDIRECTIONAL 1
#define PTYPE_BIDIRECTIONAL 2

// node flags             bits

#define NFLG_NONE         0
#define NFLG_BLOCKSERIAL  1
#define NFLG_PAGED        2
#define NFLG_CTRLC        4
#define NFLG_OLMSWAITING  8
#define NFLG_HANDLINGOLM  16

// flags for DOOR_ContinuePrompt()

#define DEFAULT_NONE 0
#define DEFAULT_YES  1
#define DEFAULT_NO   2
#define DCP_ADDYN    4


// used in N_ND->Actions, to set an access flag just use the follow:
//
// N_ND->Actions[ACTN_<action>]=ACTC_<action>;
//
// where <action> is one of the names below...

#define ACTC_NONE            ' '   // all ACTC's default to this

#define ACTN_HACK                0
#define ACTC_HACK            'H'   // user failed to enter a correct password
#define ACTN_CARRIERLOST         1
#define ACTC_CARRIERLOST     'L'   // user lost carrier!
#define ACTN_FILESCAN            2
#define ACTC_FILESCAN        'S'   // user scanned one or more filelists (FR,N,Z or F)
#define ACTN_WROTEMAIL           3
#define ACTC_WROTEMAIL       'W'   // user wrote some mail
#define ACTN_READMAIL            4
#define ACTC_READMAIL        'R'   // user read some mail
#define ACTN_PAGED               5
#define ACTC_PAGED           'P'   // user used the 'O' door to page the sysop
#define ACTN_UPLOAD              6
#define ACTC_UPLOAD          'U'   // user uploaded files
#define ACTN_FAILEDUPLOAD        7
#define ACTC_FAILEDUPLOAD    'u'   // user failed an upload transfer
#define ACTN_DOWNLOAD            8
#define ACTC_DOWNLOAD        'D'   // user downloaded a file
#define ACTN_FAILEDDOWNLOAD      9
#define ACTC_FAILEDDOWNLOAD  'd'   // user failed to dow3nload 1 or more files
#define ACTN_CHANGEDSETTINGS     10
#define ACTC_CHANGEDSETTINGS 'C'   // user uses a 'W' type door
#define ACTN_CHATTEDTOSYSOP      11
#define ACTC_CHATTEDTOSYSOP  '1'   // sysop chatted to the user!
#define ACTN_NUKEDFILES          12
#define ACTC_NUKEDFILES      'X'   // user used the nuker!
#define ACTN_NEWUSER             13
#define ACTC_NEWUSER         'N'    // user used the nuker!

#define LEN_ACTIONS              14 // must be last ACTN_blah + 1

// flags for LoadConfig       bits

#define LCFG_NONE             0
#define LCFG_NOSTRIPCOMMENTS  1
#define LCFG_NOSTRIPSPACES    2