History
	~~~~~~~

    First, thank you for your bug reports, comments and suggestions.

    Thanks to the following people (in no particular order):
    (Sorry, if I have forgotten someone and for misspelled names).

    Gunther Nikl, Veli Nuutimäki, Eric Augustine, Laura Mahony,
    Marco Nelissen,  Jarkko Vatjus-Anttila, Yambo.

    V2.00
	o (An,Xn) is finally allowed in 68000/010 cpu mode.
	o tst lab was optimized to tst lab(pc) when only 68000/010 cpu was
	  allowed.
	o Power ('^^') operator
	o EOR/XOR ('^') operator ended expression
	o Bitfield offset and width can now be defined after they use.
	o Various small bugs fixed
	o xdef and xref caused crash if operands had illegal chars.
	o Floating point numbers with exponent were incorrect.
	o FTENTOX was coded badly.
	o CNUL, DX and MOVE16 caused snma to guru when generating
	  listing file.
	o When running out of mem, requester allows retry.
	o Memory usage for the end message (shell interface).
	o Pre-defined (commandline & optfile) symbols.
	o Macros with MEXIT and ENDC won't miss the ENDC.
	o Immediate data range checking can be turned off and it works
	  for symbols which are declared after use.
	o Pre-assembled include files, which contain symbol and macro
	  definitions of include files (was in V1.99 but I forget to
	  mention it here). See INCLUDE and Arexx/MAKEGB docs.
	o ADDGB ARexx command lost main source file symbols after one
	  INCLUDE operation. ADDGB is now a bit slower when there are many
	  symbols, but it works as intended.
	o Bitfield stuff was broken in	V1.99.

    V1.99
	o Relative-relative (difference between labels) symbol was set as
	  relative (ext_def) instead of correct ext_abs when xdef'ed.
	o Arexx startup now toggles snma on/off.
	o Some bugs from INCBIN removed.
	o "=" operator didn't produce FALSE (0) if the operands were not
	  equal.
	o '040 stuff. MOVE16, CINV, CPUSH, MMU & FPU commands. Special regs.
	o Object file is no longer deleted if snma is trying to produce
	  executable and there are errors and vice-versa.
	o Floating point equate file equates were screwed up as well as
	  packed type conversion (nobody seems to use this :).
	o CASESEN=OFF caused xdefs to fail.
	o local symbols .l and .w were mixed up with long and word suffix,
	  resulting enforcer hit and garbage expression.
	o Dcb directive works now like ds directive if it has only one
	  parameter.
	o Lists with two successive commas are now handled (like x,,y).
	o Searches include files also from the directory where snma was
	  started from (used to search only from where source file is).

    V1.97
	o Case-insensitive symbol names option.
	o ELSE directive works now.
	o Some new directives (types.i stuff mainly).
	o New expression handler (boolean operators).
	o IFs were tested even if assembly was toggled off.
	o Some errenous expressions - like (A)A -  don't crash anymore.
	o Multilevel optimizing.
	o Macro directive allows macro name as parameter.
	o DX directive (BSS to code or data hunk).
	o Absolute+Relative bug fixed (if in different hunks).
	o divu.l works (argh).
	o LINE DEBUG HUNK
	o Octal numbers.

    V1.95
	o ERRCOLOR keyword in template. Highlight error char.
	o AREXX/REMGB without parameters didn't work (+ fixed one mungwall hit
	  from it).
	o QUIET startup switch disables only startup message. (You can redirect
	  output to the nil: if you don't want any output).
	o SNMAOPT M controls now movem optimizing.(It was in Q flag).
	o End message is now little different in shell mode.
	o OPT directice changed to SNMAOPT to avoid any confusion.
	o fmovecr generated also extended immediate data.
	o Output file naming failed with ".s" extension (ooouups).
	o Behaves little better when running out of memory.
	o LABEL INCBIN <file>, LABEL get wrong value. (Veli Nuutimäki).
	o NULL byte in source ends it (to avoid to assemble binaries).
	o SELFCHECK arexx command.
	o Fmove.l #imm,fpcr works.
	o FBxx works now (Eric Augustine).
	o shift/rotate to <ea> generated spurious code.
	o INDEX register scale was allowed in 68000/010.
	o CNOP started to act like maniac if PC was more than 2^16.
	o addq/subq with undefined (at 1st pass) value, caused snma to begin
	  'flying high again' actions. (Gunther Nikl).
	o "'" or '"'  works now (Gunther Nikl).
	o HUNK_RELOC32SHORT (implemented as 1015) to executables.
	o Produces also executables. (Laura Mahoney).
	o OPT A (address mode optimizing) was implemented as OPT E.
	o code_f, data_f, bss_f section types were not recognized.
	o FO, CLRFO, SETFO directives.
	o RS, RSRESET. RSSET directives (Marco Nelissen).
	o 'Old syntax' address mode had problems when base displacement had
	   parenthesis around it.
	o Allows 99 macro parameters plus "<something>" parameters.


    V1.91
	o if any of cmpa operands had symbol which was relative or not defined
	  in pass1, snma had serious problems.
	o If macro called another macro, \@ (unique label for one macro call)
	  was different before the another macro call and after it.
	o Symbols which had only one char were not handled correctly.

    V1.90
	o moveq didn't allow xref'd data.
	o mc68xxx directives
	o Command line additions ([-option])
	o Object code naming now also checks ".s" and ".a" suffix.
	o OBJ filename in template was ignored (oh my).
	o tst with pc-relative was allowed on 68000 mode.
	o ext_ref symbols with same name were written many times, causing
	  larger object file size (not actual code size).
	o xdef symbols were written to the all sections.
	o divu.l wasn't allowed.
	o Equates with relative components are handled better now.
	o Minimal WorkBench support
	o \*VALOF() + other macro 'insert functions'.
	o abslong to pc-relative optimizing.
	o DC generated too much data if the 2nd operand of the
	  previous instruction was one which took some space.
	o REPT/ENDR directives
	o Global symbol table.
	o In cases where reloc was needed didn't create it, when
	  symbol referred to equate which type was relative.
	o Equates with relative components are no longer written to
	  the symbol list.
	o CHDIR (AREXX) command called FreeVec with wrong argument,
	  causing memory loss (no crash, at least in my system).

    V1.70
	o BTST/BCHG/BSET/BCLR  Dn,<ea> set always <ea> as d0. (uups)
	o MOVEP didn't allow zero displacement.
	o ENDC switched assembly on sometimes when it shouldn't.

    V1.68
	o Some minor bug fixes and changes (okay, I forgot them).

    V1.65
	o Address components which started with 'Z' or 'z' were
	  parsed to the totally wrong thing. (Bad one).
	o IFGT did unsigned test, instead of signed.
	o Didn't notice all cases when macro was already defined.
	o Include <devicename:filepath> didn't work.
	o Expression handler didn't catch all undefined symbols.
	o AREXX, SET command.
	o 'TST An' in 020+ mode wasn't allowed.
	o Destination address mode optimizing in move instruction
	      generated spurious opcodes in some cases.
	o Movem->move optimizing.

    V1.60
	o AREXX PORT finally added
	o Several bugs fixed
	o LONGBRA flag to the template
	o ZAn no longer required if An omitted in addressing mode.


    ========================================================================

	Probaply I don't remember all the changes and fixed bugs, but I
	hope all the major ones are here.

	First released version of SNMA is 1.39.