****************************************************** I'm trying to clean up the displays for the configuration editor. If you find some input routine/display doesn't fit inside the window opened, please send me a mesage, and let me know which one. ****************************************************** For those with FTP access, we now have our own Jam support directory. ftp birch.mathstat.uottawa.ca (137.122.49.62) in the /JAM directory. I'll try to get archives up there as soon as I make them. I'll still be sending archives to Aminet every blue moon though. I'd like to remind people that the JamMail FAQ is included in the archive. Please look in there if you're having a problem before sending a help message. - work on JamPhone GUI, JamMail Cfg GUI and JamMail Mailer GUI will likely hold up future versions for a while. Changes - July 27th - added s/zmhon and s/zmhoff scripts to be executed by some "Cron" program to be executed before and after Zone mail hour. You may want to run them once per hour. normally, you'll also want to execute the zmhoff script in your user-startup so the variables have a default value. Changes - July 24th - fixed a bug in the scheduler relating to dial sets. I don't know how long its been there, but it slightly disabled some of the functionality. Changes - July 21st - JamLogTrim added to archive. Some people were requesting some easy way to trim their logs. - Date added to logging of connect string. - JTPhone added back into archive. It was removed when JamTool was replaced but is still needed to edit the phone book. Hopefully its replacement will be available soon. Changes - June 19th - fixed bug in POLL where fidonet addresses were parsed wrong if the domain was given. Changes - June 18th - jammail.library and POLL updated to reflect changes relating to JamSched - JamSched cleaned up some more - hopefully fixed up randomly huge numbers. - POLL program now has "FORCE" option. Changes - June 9th - Maintenance release - mainly to clean up a few things - JamSched - the replacement for JamTool is now included in the package. PLEASE NOTE! Unless there's something wrong with JamSched, there is no reason for JamTool to be on your systems anymore. - JamSched now compiles with the Adaptive dialing system for dialing UUCP systems as well. Changes - April 22nd - new jammail.library added to completely remove transfers of those 0 byte POLL packets, and it makes the POLL command safer to use for non-fidonet sessions. Changes - April 20th - wpl.library updated to support these long aka strings for connects. - back to working on jamroute Changes - April 13th - tiny modification to wpl.library transfer window relating to the CPS field. Changes - April 6th - Oops, I screwed up with the login banner message. It should be displayed again now if you have one configured. Changes - April 4th - More fixes in the User Login menu - Login message now configurable. All JamMail variables (listed in the InboundNotify.doc) are available to be used in this string. Changes - April 3rd - some minor changes to jammail.library and the emsi.library hopefully to fix a possible allignment problem. Usually shows up with inbound EMSI sessions. - login timeouts hopefully fixed up a bit. It seems there was a couple cases where the main login prompt wouldn't hangup even after a few user timeouts. - The NetworkFrontend option is disabled if UserCommands are disabled. There's no reason for having both like that. - Term/Fax menu cleaned up a bit (editing of disabled options isn't possible). Changes - April 1st - Visual Layout manager minimum window heights lowered to 30 to allow a two line window with an 8 point font. Changes - March 30th - Fixed (I think) Long Distance calling log for Fidonet/EMSI sessions. - XprTransfer window fixed a bit. Changes - March 29th - UUCP mail bundles now identified during fidonet ZedZip/Zap transfers. - Small change in CfgBBSLaunch->Edit to fix display problem. Changes - March 25th - log lines are now up to 1024 characters, so entire EMSI AKA lists are going to be on single lines (one for known, one for unknown, and one for bad). Changes - March 23rd - minor changes to config file (some size values were converted to chars instead of ints) - another minor change to wplemsi.library cleaning up output. Changes - March 21st - new version of JamMail.library added - this one adds a function that will allow me to delete all t:poll files on an inbound or outbound session so those 0 byte files won't be transmitted to other FidoNet sites. Changes - March 16th - replaced "screen mode" selection code. Now all modes supported by your system are available, not just modes that are CBM supplied. Remember, JamMail doesn't actually open a screen during Mailer operations yet though. - slightly modified emsi.library to timeout less often during turnarounds. - emsi.library also makes sure TRX# hex number is upper case. This shouldn't be required, but some other mailers may crap out. This is only relevent on inbound sessions with the turnaround reply packet. The outbound packet was already in upper case. Changes - March 15th - some work on visual preferences mode, fixed a few things. Changes - March 14th - New window positions setup - all of your windows will need to be re-positioned again - Usefull window defaults are now generated upon startup. They will likely still need to be adjusted to take into account overscan. - fixed a massive bug in the Layout Manager, where the window size for line 1 might end up being 0x0 which would cause a big problem next time you went into the Layout manager. - Layout manager would allow positioning of LD Phone Window when the Phone window was enabled, but didn't check to see if LDPhone Logs period, were enabled. Changes - March 13th - updated xprclock.library included - fixes problems with 68000/010 machines. - working on adding all of the GUI config options, the actual GUI is not in. (yet!) - work on LogWindow/File options menu - configurable for setting which log system to use - the GUI one is obviously not installed yet, but configurable :-) For those of you using LogProc with other programs, you will still be able to use it with JamMail, or use the new stuff that will be built into the Scheduler system. - Visual Layout manager now generates default minimum window size for either the GUI scheduler, or the TEXT scheduler based on font size. - LD Phone Log options updated to reflect the fact LogProc may not be used. Changes - March 12th - put better version of JamScan back into the archive - fixed Type command for ZoneMail text file, it used the pagination mode. - reorganizing Scheduler and Log Options menus to place things in a more logical place, and preparing for adding configs relating to GUI scheduler. - added "Other Line Configs" for options from other menus that were more line related (globally, so not appropriate for the line cfgs menu) than where they were. - Added "Supra CallerID" mode, essentially, the Supra modems pesent the "NAME" before they present the NUMBER info, others present the NUMBER first. Changes - March 11th - fixed another Enforcer hit in Line Cfgs -Add Line option. - recompiled WPL library to clean up some of the stuff I had been working on mid-February. - Valid/Unknown/Bad addresses should each all showup in a single line, instead of splitting them up into multiple lines each. - Version numbers will now only change when I make a Clean source compile, not when I do single C file compiles - the numbers were going up waaaay too fast :-) Changes - March 10th - finishing up Visual preferences options - essentially everything works except the actual opening of a new screen during mailer operation. (let me know if something else isn't quite working). - removed "Open Custom" option since JamMail can't operate with a non-public screen anyways. Changes - March 9th - fixed (argh!!!) line stack setting. No value lower than 4k is allowed, and if one is found, it will be set to 10000 bytes. - Redesigned UUCP configs screen, to add option to disable UUCP2 sessions. - added textfile option to BBS launch, this will be displayed before bbs's are launched. - added new filename to cfgtextfiles menu, this textfile will be displayed to calling users if Zone Mail Hour is in effect. - typo fixed for Clock/NRC launches. Changes - Feb 5, 1995 - fixing a few things in Visual preferences section. Changes - Feb 4, 1995 - Fixed a bug i'd been searching for in the EMSI handling stuff for ages. should speed things up a tad. Changes - Feb 3, 1995 - fixed enforcer hit in "Add New Line" option. Changes - Feb 2, 1995 - fixed bug in jammail.library causing the openlibrary count of xferq and wpl to be waaaay off. - fixed file request handling (sometimes the inbound .req file was being deleted too fast). - inbound EMSI timeout value raised a bit. Changes - Jan 26, 1995 - Visual preferences screen now visable, and all window options are used in here, instead of in the LogFile menu. Changes - Jan 24, 1995 - Adding Visual Preferences section (hidden V menu, for those of you that actually read this file). Not all functions are working, but window layout menu option is. - wpl.library 0.99.30 - "Abort" RexxMsg command now aborts file transfers as well. (s:killjm will use this) - wplemsi.library 0.35.20 - now checks for Abort as well. Changes - Jan 14, 1995 - fixed stupid bug with Inbound Notify configs - it wasn't launching correctly. Changes - Jan 13, 1995 - bibi messages removed from xprzedzap.library. - InboundNotify.Man documentation added. - Tiny adjustment for outbound EMSI Handshakes - should be a bit quicker Changes - Jan 12, 1995 - Finishing up new Inbound File Notification Support. - New Configuration Menu setup for this. Changes - Jan 10, 1995 - fixing up File request support. TrapDoor style commands will be supported, and XferqSH is removed in place of JFreqSH. - Removed all XferqSH related options in configuration editor. Changes - Jan 9, 1995 - added simple jamtool.phone book. New users will need this, but old users will *NOT* want to move this into s: as you may overwrite your old one. Changes - Jan 8, 1995 - Added NetworkFront option (login menu), which makes network sessions more reliable for some systems calling in. Can be disabled. - Fixed bug where some "Unknown" inbound sessions were showing up with bad FTN addresses, and things like Freq's wouldn't work. Changes - January 3rd 1995 - fixed bug in jammail.library lookup functions, in that -Unlisted- numbers were still being dialed. - user "freqaddress" removed to make space on that menu for new options soon to be added. ------------------------------------------------------------------------- Slap Happy New Year Guys! ------------------------------------------------------------------------- Changes - December 13th - Been busy with school, exams, and JamGate, so haven't had much time to work on JamMail much. - partial direct-zap support re-enabled for those running versions of xprzedzap that support DirectZap. I'm not satisfied with the reliability of any of the DirectZap supporting versions so do not included it. If you do wish to use it, edit your s:Jammail.cfg file and put a 1 beside DirectZap. Note: I myself don't recommend using any of these other libraries, so if you have any problems related to the file transfers, you'll be on your own. Changes - November 21st - cleaning up JamScan - Put Docs files in a sub-directory - added some docs on supporting fax - one message is more directed to TrapDoor, but the suggestions about Init strings and such are all valid. Changes - November 18th - fixed division by 0 bug (I think) when transfering 1 byte files. - moved back up to one of the newer JTPhone's that were still working - I went back far too far Oct 20. Changes - November 9th - removed extra space in address field, after address list in EMSI handshakes. It shouldn't have mattered to anyone, but didn't really need to be there anyways. Changes - November 4th - some visual changes in the LineCfg areas. Fixed some inputs. - POLL program now shows priority it is setting the poll packet at. - added SIMPLE and BORDERLESS options to Logs and Windows menu. - using a SIMPLE refresh, ConClip will be able to clip text from the modem windows. - Added NAME response, for CallerID systems that present the name as well. - Input requestor was one digit short on a number of inputs. This is now fixed. - The System "Line Numbers" do not need to be numbers. If you aren't using the $(LINE) variable as a number in a bbslaunch string or something like that where it needs to be numeric, you can label your lines however you want. Remember, that this name is the one used for the call port if you have custom dial scripts of your own. Changes - November 2nd - more visual changes to editor to make things fit better in the window. Changes - October 31st - If your JamMail line numbers didn't match your system line numbers, the custom dial strings were not functioning. Now fixed. - AddLine display fixed up a bit. It defaulted to "nullmodem.device" if you didn't select anything else. Not exactly desirable :-) Changes - October 29th - Fixed input routine (used to be for getting strings, now is only used for hot key menu items and such), that wasn't working for a being entered. ***** - JamMail.Pic included.. This is a possible new GUI for JamMail. Please comment. ***** Changes - October 28th - Various cleaning up in JamCfg menus where things weren't fitting in the window. Changes - October 27th - JamMail CFG is now font size sensative. The main window size corresponds to your font size, and the XPR Transfer window size is calculated based on font size. The Default Text, and Default Screen font sizes are both taken into account. To re-size the XPR transfer windows, simply edit the window and leave the position values the same if you wish. Changes - October 26th - removed some debugging from emsi library Changes - October 25th - CfgText files menu fixed so correct options are disabled when correct things are disabled :-) Changes - October 23rd - wplemsi.library updated to just use instead of . Changes - October 20th - Added "RealModem" flag. Users of Nullmodem.device or those using ISDN should switch this to false. This fixes a problem that occured when attempting to answer a call on these devices. - old JTPhone put in archive until new JamPhone is completed. Changes - October 19th - Wow its been a while, i've been so busy with JamGate, I haven't been able to fix a few things in here. - BBSLaunch should be working again. Changes - September 18th -> 27th - long drawn out battles with the emsi.library trying to get things working with Shane connecting to D'Broke and one TrapDoor system. - add line/modem option now setting default stack. Previously no default was set, so 0 was used, which caused instant guru when new lines were launched. Changes - September 17th - Login Menu Commands are now completely disablable - No Grabs, no downloadable files and no bulletins. Very similar to a straight "FidoNet" frontend mailer system. Changes - September 16th - Finishing off supporting alternative "node numbers" in the scheduler and other areas. Changes - September 15th - Login Connect Msg can now be disabled (the connect / time line sent to inbound callers) - Each JamMail "node" can be considered a different "line" number relative to the rest of your system. (ie, JamMail's first line could be line number 4 of your BBS). Changes - September 14th - Little changes all over the system - Default Cnet launch string now uses Cnet: assign. - modem initializing sequence cleaned up - Scheduler system numbers are now lined up correctly. - Finally got someone online testing with both a bad Trapdoor system, and a D'Broke system, so massssive amounts of outbound EMSI debugging done. - thanks to Shane Gouseman from OHIO - Outbound sessions to D'bridge seem to work perfectly now. Changes - September 11th - Bi-directional protocol display support added to WPL. Bi-directional display version of XprZedZap created as well. - *PLEASE* send me comments on the new xpr window look. - Baud rated included in xpr transfer window title. - jammail.library now correctly parses non-ftn addresses without removing domain/sub-domain information for EMSI handshakes. Changes - September 9th - New and improved super duper (ya :-) outbound EMSI handling. I haven't found a system it doesn't work on. There doesn't seem to be any timeout problems anymore right at the start, so should fix problems connecting to slow systems, or those with large banners. - wording of "EMSI AKA's string" changed to "EMSI Addresses string", since it does require your primary as well. These addresses are the *ONLY* ones that will be sent in an EMSI session. Changes - September 8th - *FIXED* wplemsi.library stack usage that was causing "new" versions of Jammail to crash after EMSI sessions. - Added stack configuration option so each line can have its own stack setting. 10k default, I would not suggest going lower than 5k or so. Changes - September 6th - fixed situation where outbound calls that collide with an inbound call would be dialed again immediately, before inbound call is answered. - removing transfer debugging (pi1, pi2,.... msg1,msg2) Changes - September 2nd - fixed getinbound command settings when EMSI is disabled completely Changes - September 1st - fixed bug in Modem response configs where it would allow more than 18 responses to be added. Changes - August 30th - added "q" and "x" as synonyms for the "quit" command at the login prompt. - added "#? #?" as equivalent to typing ? which will catch people that type in real/proper names at the prompt. - possibly fixed problem with non-locked modems. - added inbound EMSI_REQ banner at front of login stuff to possibly catch some systems that can't handle banners before it. Changes - somewhere in here - JamScan 0.65 bug fixed regarding reading of #?.?LO files. Was home for a weeks vacation. First time home since Easter! Changes - August 17th - Setup script now closes executing lines before starting up again when scheduler isn't running, or the scheduler doesn't close them down when the scheduler is closed. - adding debugging during fidonet transfers trying to find location where Xferq.library lockup occurs. Changes - August 16th - really fixed the ability to disable scheduler. Changes - August 15th - added "Reply ASAP" option to scheduler menu. This causes the line to return a result of 0 for the call, as soon as it gets a connect message. The "Real" call status is not returned. Those using the JamMail scheduler that have multiple lines, can enable this to allow multiple outbound calls at the same time. Previously, it would only do one. - return codes from "Call" commands directly to a line are now defined. 0 - session ok 1 - session failed (transfer) 5 - Busy 10 - Timeout/No Carrier (Maid Response) 15 - No Dial Tone (Line Response) 20 - Bad Site (no phone number) 25 - Bad Call type listed for site in phonebook (not supported) 30 - Failed Handshake. - Added Ability to disable Scheduler again. Working towards cleaning this area up. - Call Collisions are now always forwarded directly back to the same line to be done after inbound session is finished. - updated todo list. - updated makearchive script - now tests archive, and creates .readme file. Changes - August 12th - Removed support for Ymodem transfer protocol. Nobody is ever going to use it anyways. - Playing a bit with supporting Dmodem protocol - Not working yet. - Jamtool 0.28 included in archive. This is a downgrade, but does work for everyone. This will be used the scheduler functions are finally replaced. Because of this the "Adaptive" dialing will not work as advertised. Changes - August 10th - Oops, I had included the debugging version of xferq.library. Sorry, back to the regular one. Changes - August 8th (or so) - JamScan now able to handle tabs between columns. - DUHHHH I didn't included "JamMail" itself in the last archive. Changes - August 4th - Massively changed outbound handshaking code in both JamMail and the emsi.library.. Please let me know if you have any problems with outbound EMSI sessions of any kind. - if you do have a problem to report, please cut the debugging info out of the modem window and send it to me. - added variable $(connectmsg) which will contain the connect message as it came in from the modem (ex. CONNECT 19200/ARQ/V42b) Changes - July 29th - screwed up memory allocations and such, had to go back to a version a couple days old. hate it when that happens. - improved answering code for slow/busy system situations, where the system may not have caught the rings at the right time, and they call came blasting in causing the system to answer multiple times, thus cancelling the first answer and hanging up. - debugging code added (just little msg displays in the modem window) right after fido sessions during hangup and such trying to find stray bug causing the system to hault after hanging up. changes - July 27th - another emsi.library - still trying to fix problems with calling emsi systems with large banners. Changes - July 24th - fixed massively stupid bug in the jammail.library akalookup function where previous systems aka variables weren't removed, so if you connected to a system with a large number of aka's (like mine), and then called someone with a short number, some of my aka variables would still be active. Changes - July 20th - adjusted timeouts for outbound EMSI sessions - *HOPEFULLY* more reliable when the remote system has a large banner before their EMSI_REQ line. Changes - July 13th - Cleaned some debugging from the AKA lookup function in jammail.library - removed outbound 256 character EMSI AKA's limitation. Now, up to the full 2k of AKA's will be sent out. This should also work for outbound EMSI AKA strings in the custom changes menu as well. - my AKA defaults should now be cleared when one of your AKA's are loaded so fields of your AKA that are blank, really are blank, and don't have my info in it. Changes - July 11th - Internal Cnet 3.x launch command updated. Changes - July 9th - Timing of of emsi.library improved to handle slower systems that may not decode a large emsi packet fast enough. Changes - July 7th - Poll program now deletes the adaptive dialing stats, so the system will be polled on the next scheduler scan. Changes - July 5th - Collision detection fixed up a bit. - finished up POLL support with JamTool. POLL now works with all dial types, and does not attempt to send the 0 byte file (so the filename is irrelevent now anyways :-) - cleaned the debugging from emsi.library - fixed up adaptive dialing. - adjusted timing issues with emsi.library calling systems with large banners after the EMSI_REQ line. Changes - July 4th - Poll program fixed - length of temp name was too long for some PC systems so would be refused, and the auto-dialing would not stop - added gpfax options to command line taken from modem stats for the configured line. Changes - June 25 - 30 - various fixes in EMSI timeouts - fixed input routine for AKA's new primary address. Changes - June 24 - added internal support for GPFax - not *FULLY* tested but should work for inbound FAX calls. Special thanks to Donald Knott. - AKA lookup bug in jammail.library fixed where last address listed would be dropped Changes - June 22 - working a bit on POLL. - fixed "bug" in jamtool scheduler that caused creation of alot of files in env:jamtool/ that were not necessary. - stack lowered for each line. - jammail.library only does display in line window. Changes - June 21 - Completely new POLL program added. Should work with all versions of JamMail. Requires the scheduler to operate, and when adaptive dial is disabled, is similar to a regular auto-dial. Currently, this command should only be used with fidonet type dials because the polling may never stop with other types, but this will be fixed in a future version. Changes - June 20 - Added Adaptive Dial switch for scheduler. Disable this, and the scheduler will not "dial less often" if busy signals or no-carriers are received. - jammail.library now has AKA lookup function for EMSI. - new JamTool is compiled - only has scheduler options. Only a single binary now. Changes - June 19 - fixed massively stupid bug relating to the multi-line function of the scheduler linking in with jammail.library for line set selection. - fixed bug in the jammail.library lookup function. If you attempted to dial a non-fidonet site that didn't exist in your phonebook, it would assume the first fidonet system listed in your nodelist (1:1/0) and attempt to dial it. changes - June 17 - modem init string lengthened to 100 from 60. Changes - June 16 - Added Lookup function to library and JamMail is now using it. - the system is much smoother now. - Nullmodem.device is now "temporarily" required for the scheduler. Unit 8 of nullmodem.device is being used. - when the new scheduler is done, this will not be required anymore. Changes - June 15 - Now using jammail.library in JamMail.WPL script. "Duration" already moved over, now doing Type, wazoo cap, and isvalid. - timeouts in EMSI.library adjusted to hopefully give more reliable extreamly high speed connects (ISDN and such). - added ability to set custom AKA's string for *OUTBOUND* EMSI sessions - added two more possible lines of each type of address in an EMSI session (valid, unknown, and invalid). - cleaned up visual display in emsi/aka's setup menus. Changes - June 14 - All JamTool functions are now present in JamMail.library other than the lookup and scheduler functions. A special version of JamTool will be compiled that only has these functions. - Brand new Type function added in JamMail.library. This has full stop, paginate and continuous modes. - EMSI AKA's string limit raised from 512 to 2048 - allows aprox 100 AKA's Changes - June 7 -> June 11 - MOOCHO changes to JamTool - still not working, so i'm going to completely scrap JamTool, and finally, get around to writing the JamMail function library. This library will hopefully be smaller, and definately faster since it will not need any ENV: variables. NO MORE CPU SUCKING from the scheduler. Changes - June 6 - gone back to JamTool 0.28 because of crashing problems. - POLL program removed because of this fact. - this will be fixed and re-distributed. Changes - June 1 - Archive name shortened to allow PC systems to file request versions, and for easier distribution on file networks. Changes - May 30 - Added "POLL" program. It requires the new JamTool to operate. it adds sites to an automatic poll list, that will be called everytime the scheduler does a scan. I'll be adding an "UnPoll" option to it as well. - this is purely temporary until the new scheduler is written up, as the new scheduler will have all of this stuff handled better. - Gone back to previous version of Xferq.library. The one I had compiled didn't work for some reason. It was likely the cause for the crashing some people had reported. Changes - May 28 - JamScan fixed up for NORM handling of FLO and OUT type files - JamTool massivly cleaned up for CPU usage of Scheduler - JTPhone bug fixed - showed up when creating new phone list - "help" command added to Freq/Grab login menu. Changes - May 24 - More EMSI.library mangling - almost full plans for new scheduler done on paper. Changes - May 21 - Cleaning up inbound EMSI handling from other wplemsi.library versions - starting complete design of new scheduler. CHANGES - may 19 - ARGGGAGASDFASDFASDFASDF STUPID EMSI BUG! - new EMSI library finally fixed. Things should be fine now/again. Changes - May 12 - Wrote a completely new string editing function. Now uses a proper ADos 2.0 String Gadget for all string inputs. - still problems with the new emsi.library. don't know why. Changes - (somewhere in here) - added timestamp support to emsi.library Changes - May 1 - *COMPLETELY NEW* emsi handling. JamMail itself modified to be cleaner, and most of wplemsi.library has been re-written. Currently full debugging is being shown in the slave window to attempt to find any further problems. It seems to work with pretty much every EMSI system i've attempted to connect to, but it has some problems calling some specific non-EMSI systems. Changes - April 27 - Fixed bug that happened "strangly" where inbound Wazoo sessions weren't possible when the last inbound session was a buggy EMSI one. - Generated new Jammail1-preview. Should open on more systems screens. - will update its menus to include new JamMail options soon. Changes - April 22 - 26 - forgot to log things - tiny bugs here/there - CLEANING UP inbound and outbound EMSI. - adding to JamMail.FAQ - background work done on JamMail flo monitor (not included yet) - JamScan "NORM" bug worked on. Changes - April 21 - Added JamMail.FAQ - DirectZAP no longer supported in JamMail/EMSI sessions. XprZedZap 0.55 now included in archive. This library is much safer, and should stop the aborted Zmodem/ZedZip sessions. Changes - April 19 - Fixing limitations on number of "LOCAL" AKA's for EMSI sessions. - fixing up more bbslaunch problems Changes - April 18 - added more commandline logging messages - added DELETEFLO option to JamScan. - Fixed BBSLaunch execute string editing problem. Changes - April 17 - delay in turnaround should fix hanging problem. - added more commandline logging messages Changes - April 16 - You can now delete all modems if you wish. You can not exit the Line configuration menu unless at least one modem is configured though. - Docs updated with Information about launching Xenolink BBS. - PhoneLog now uses "Called" address, instead of remote systems primary address. Changes - April 15 - Added configuration option for Long Distance phone log filename - Added options to disable/enable the LDphone log, as well as a new option to possibly display the log in a window as well. - Fixing up more commandlines to be logged. - Fixed Display of Scheduler Log Window size Changes - April 14 - Having problems with JamScan again. Weird memory things showing up. - fixing up logging options so command lines are displayed in more sections when enabled. Changes - April 9 - Cleaning up DOCUMENTATION! Ya, that DOCUMENTATION STUFF! - cleaning up wierd display issues found while documenting. - finally added option to disable inbound processing option of XferqSH. - adding option to configure "Text:" default for login menu display files. Changes - april 7 - cleaning up hangup code for NRC call types - cleaning up bang hangup code - cleaning up JamTool - New JTPhonebook Editor Changes - April 6 - finally put OS checking code at the beginning of JamMail. - JamMail1-preview should *HOPEFULLY* give a bit of an error message if it can't startup for some reason. Changes - April 5 - various little tidbits fixed/changed - JamScan 0.60 now included - added MOVE option. - fixed JamScan MOVE bug (required / at end of path) Changes - March 29 - little moree twiddling with wplemsi.library - gotta get more reliable outbound EMSI connects when the banner is missed. - cleaning JamTool a bit. Changes - March 19 - 26, 1994 - fiddling with JamTool a bit more, cleaning things up - JamMail now displays/uses 4 variables from the EMSI AKA string, so this is about 40 known addresses, 40 unknown addresses, and 40 bad addresses. - Preliminary work done for JamScan to read .FLO files. Let me know if any problems arise. Changes - March 18, 1994 - more changes to JamTool - faster still! smoother scheduler operation and faster single address lookups. Changes - March 17, 1994 - Oops, bad wplemsi.library went out.. shit its fixed now. (gotta love it when people request things *WHILE* they're being worked on :-) Changes - March 16, 1994 - Official bugreport.txt added. Please use this when mailing me bug reports. - New JamTool included. This one is *MUCH* faster with the AKA lookups than previous versions. - New JamScan included. I think i've found the problem with the random GURU's with JamScan on some systems.. This is .58. It supports patterns on the destination addresses. I'd like a few systems to report back to me on how well it works before I fully update the documentation for it. To use the routing, do something like this: route (1|2|3|4|5|6).#?.#?.#? Fidonet#*:*/*.* lzh crash route (39|40|41).#?.#?.#? AmigaNet#*:*/*.* lha crash This type of setup, would route addressed with the mentioned zones to their correct domain. any systems you want done differently (than LHA/Crash) then you need to list them beforehand. - more work on xpremsi.library. Should work better. Changes - March 12, 1994 - outbound EMSI should always work now. - minor tweeks here and there. Changes - March 7, 1994 - little more tweeking with wplemsi.library. - version string changed for the welcome banner. Changes - March 6, 1994 - New JamMail1-preview program. Massive changes to most list-views, and the scheduler screens have actually been done. - Adding Ymodem as an additional available protocol. This is usefull for systems that may have flow-control problems. It is positioned between Zmodem and ZedZap. If someone is having flow control problems, they should disable DirectZap and ZedZap. Ymodem will be the highest priority EMSI protocol, so mail from other systems supporting Ymodem will hopefully be more reliable. Zmodem/ZedZip should still be left on as other systems will be using it. The XprYmodem.library file is included if you don't have it. If you are low on space or ram, simply disable the protocol and delete the file. This protocol is simply a little extra that some systems may find handy. - The "Write Setup" menu option, lists the librarys that JamMail uses or doesn't use, and it will tell you if your inbound or outbound directory does not exist. - New WPL.Library included in the archive. This one has no debugging in it at all. Along with a clean compiled wplemsi.library, things should be debugging free. - Massive work on the JamMail1 gui and new JTPhone gui. Hopefully i'll have a new JTPhone out soon. Changes - February 26 - Added launch code for MEBBSNet BBS. - Added configurable switch to make JamMail ignore possible error codes from the BBS making JamMail hangup irrelevent of some error happening. - Fixed readconfig code, that wasn't allowing multiple BBS Launch commands. Changes - Feb 25 - AHHAHAHARGHRGHG I screwed up. The last two archives (the 25th, and the 18th) likely still had all of the EMSI debugging turned on. So if you were using the internal serial port and weren't running SUSHI you'd have no prayor trying to get an EMSI session. Changes - February 24 - Not much happening in the way of this JamMail. I'm trying to get a bit going with the new Preview version. The Preview binary in here is the same as the Feb 18th version. - There has been some reported problems with the new JamScan56 binary on some machines, with it causing a GURU. IF this does happen, go back to version 55 (the jamscan055.lha archive is available on my system, and many others). - I've done a *LOT* of work on the JamMail1-preview manual. this one won't go out until JamMail1 itself does since the description of the software, is relative to the new GUI version of the software, and some options are in different locations. - Possibly fixed UUCP/UUCP2 sessions to use any and all versions of UUCICO, by adding the -Getty switch on outbound calls as well. As far as I know, they all worked fine for inbound calls, but should work for outbound as well now. Changes - February 18 - Gotta love it when I forget to update the .readme :-) - tweeks and changes in various areas of the system. I can't remember what all I changed. - JamScan now allows upto 200 config lines. Previously it was 50 and I just hit that myself :-) - JamTool has been updated to use a much faster method to do the EMSI AKA lookups. A new JamTool archive has been sent out as well. - All of the AKA/Remote Changes menu options are valid for outbound EMSI sessions as well (ie, directories, system names), and EMSI itself can now be disabled (previously it could not be disabled). - you can now set an option to abort on a CTRL-C in one of the modem windows. You need to press ctrl-c twice for it to work however. I'm going to see if I can do anything about this. Changes - February 6 - Missing Label Error for Fax sessions fixed (DoDial4.4) Changes - Feburary 2 - 5 - Lots of cleaning up of wplemsi.library. - EMSI_REQ banner for receiving calls is now hidden to human callers. ( sent with no linefeed). - other tweeks with the jammail.wpl file. - two digit "hex" Product ID is sent in EMSI banner, although since WPL is 07, it didn't make much difference :-) Changes - February 1 - Fixed up wplemsi.library. I wasn't verifying the EMSI CRC's because of a UBYTE problem that I had fixed, but hadn't enabled the CRC checking again. Changes - January 31 - There's been a few strange hangups during XprZedZap file transfers. There is a possibility this is related to Yves's version of the library. If this problem continues, I am going back to Russ's version of the library that does not support DirectZap. You will be able to pickup Yves' library seperately if you wish, but I will not be including the library capable of DirectZap unless the bug is found. Changes - January 30 - *SHIT* right after making up the archive, I found a bug I introduced yesterday in the wplemsi.library. The host.sitename was not being sent. No major problem, people just didn't know what the system name was that was calling them :-) Changes - January 28 - Cleaning up for an update to the 1210 and 1216 and archives. - changed name of xpremsi.library to wplemsi.library (since no other xpr host can use the library right now). - removed my getline2 function (for string editing) since it was causing problems, and the new GUI version of JamMail won't be using any of this stuff anyways. For people that need to edit some of the really long strings like possibly your EMSI AKA string, use a regular text editor to edit the s:Jammail.cfg file, but be carefull not to change anything else. When you run JamMail to read in that file (and to generate the mailer), make sure that string was read in correctly). Changes - January 24 - Fixing up Collision detection with replycall and forward call stuff. Changes - January 23 - 18 - Various fixing up relating to EMSI - Inbound EMSI was "finished" sometime in here. Changes - January 17 - Fixed few minor bugs relating to not having any AKA's or MenuFiles configured (it was defaulting at having something). - Finished LogWindow menu. Changes - January 16 - Window editing displays are fixed up a bit (displays size and upper left corner instead of raw:x/y/x1/y2 format). - asynchronously launching bbs's :-) - Completely re-vamped input routine. Insertion and cursor keys (left/ right) now work. Changes - January 15 - The version number is now automatically being updated (i'm lazy:-) - Added NoDrag/NoSize and BackDrop options to LogWindows menu. *ALL* windows will have these options (except xpr transfer windows will not have backdrop option); - Now generating S:Setup batch file. Logfile and LogWindow are now configurable and written in this file. The LDPhoneLog is also configurable and written in the setup script. Changes - January 14 - Added Modem Banging config. 3 choices. Soft, Medium and Hard. This selects which string will be sent to the modem after every session to get control of the modem back (ie, until an OK response is received). NullModem.Device does not support the Hard banging type. The Soft is basically an AT, the Medium is an ATZ and the Hard is an AT&F. If you previously had the Medium or Hard in your Init string, you don't need it any long if you use it here. - All protocol selection code is generated only if needed. If you don't want ZedZap used, no inbound or outbound zedzap code is written to the .wpl file. - Init and Attention modem strings lengthened to 60 characters. Changes - January 13 - Added DirectZap support for outbound EMSI sessions. (I think !? :-) - Cleaning up inbound Fidonet sessions now. WaZoo and EMSI protocol selection is now done the same way as the way i'm doing it for outbound protocols. Now all we need, is Inbound EMSI support. Changes - January 12th, 94 - more internal cleaning Changes - January 11th - My USHayes V.FC 28.8k modem arrived. I'm going to change the (TIME) response type to a simple (LOG) response, so anything that has this response type will simply be logged. Nothing else special is done with anything that matches. Also, the response type (LOG) will not be put on the end of the line (like RING and others is done). - All outbound Fidonet session code re-done. It is now easy to add new protocols to WaZoo or EMSI sessions. - Protocols available are now configurable in Fidonet -> Other menu. - Re-write of alot of the outbound dialing sequence. Collision detection is now much better (theoretically!). - Additional internal ModemInit added to mailer. Cleans up alot of possible junk that could happen before main INIT was done after a dial/session. Changes - January 10th - Still cleaning internals & sources Changes - January 9th - Massive cleanup of internal JamMail code. - You can now only select Handshaking methods for your Aka's that are turned on by default. Changes - January 8th - Added UUCP2 session type. You may want to have two different sets of UUCICO options, one for regular systems, and one for systems that can handle larger block sizes and faster sessions. JTPhone will be updated to handle this as well. - I think inbound FAX reception has been fixed. Thanks to Todd Vierling for the code. Changes - January 6th - The AddModem fuction should actuall add the correct defaults for the modem you select. - Actually fixed the defaults for Nullmodem.device lines. - Included the CNet BBS launch string as default #3. Since it is only a single command line, the command line is actually placed in the launch string so you can see it (the DLG and VBBS launch commands are more than one line, so are just generated in your mailer). Changes - January 5th - Oops, I haven't been making my entries! - Full outbound EMSI is now being done (actually, it was done before my Xmas vacation, but I didn't mention it here :-) - Scheduler timeouts now have a maximum of 9999 seconds instead of 255. - Init timeout value is now configurable for each line (wasn't configurable at all previously). - Pre-fido bug reported in wpl-programmer fixed. - inbound and outbound directory prompts actually add '/' character if not already there. -------- Happy New year guys! Changes - December 15 - Back to EMSI work. Now actually attempting to do WPL variable handling from inside XprEMSI.library. - latest Wpl.Library included in archive now. - Fixes RexxMsg bug. Changes - December 8 - Completely cleaned random "OK" messages popping up in log messages that come back from modems that take a long time to init (ie, slow 2400 with an AT&F in the init string). Changes - December 5 - Still playing with EMSI (not included in this archive) - New security option added to JamTool/JamMail. This makes sure people aren't using the nice escape sequences possible in the execute commands in either the main login menu, or the freq server name input routine. Changes - December 3 - Due to the Mad hacker - i've cleaned up a few input routines that could have been used to do nasty things. Changes - December 1 - Fixed timeout in ModemInit routine that was causing "OK" results to show up in the main log window with extreamly slow modems (slow at resetting if you did an ATZ as your init/atten string). - Setting the current modem to 300bps before dialing NRC systems for better compatibility with different modems attempting to do the connection. Changes - November 22-25 - Working on outbound EMSI support. This stuff will not be included in the current archive, but this is to let you know what i'm working on. Inbound EMSI will be added after outbound is done. Changes - November 21 - problem with "-ListConfig" command was causing a guru after startup of JamMail. The command has been removed since it was only being used for debugging purposes anyways. Changes - November 19 - Now including JamScan and JamTool in the JamMail archive along with their respective documentation files. Changes - November 18 - Lots of work done on the Documentation. Completed the FidoNet configs area (updated to the new menu set), and added the Login Menu section. - archive is now named in the "JamMailDDMM.Lha" style, with the day and month. Changes - November 17 - Re-structuring menu system - Fidonet options are cleaned up, the documentation will be a little wrong during this time. The Privacy modes are now a single option in the "Login Menu" that selects each of the options in order. Cleaning up the code that uses these settings as well. - The inbound and outbound directory selections were moved to the Fidonet configs menu. - privacy variables removed, more cleaning up. Changes - November 16 - Call script included. You can set the Execute bit on this script or have an alias that executes it. This command will take a single parameter (an address, or portion of a FTN address) and it will add that system to the scheduler dial list. - Due to this change with the scheduler, when call collisions occur, calls are forwarded back to the scheduler in hopes that the call being attempted can be sent to another line (if this is a multi-line system). - Finally updated TODO: list. Most of it had been done! Changes - November 15 - Scheduler slave (message port "JAMMAIL") now accepts call commands. After it scans for systems in Xferq (and UUSPOOL: if configured to do so), it will check to see if a call command has been sent to it. If a call has been received, that system is added to the top of the ToDial list, and it will be dialed first. Only one call command per scan will be added. It is recommended that you use an alias like: Alias Call run nil: rx "Address 'JAMMAIL' 'Call []'" to do manual dials. If you wish the call to be done immediately (assuming it is in a waitloop), send a Ctrl-F (Timeout) to the slave right after you send the Dial. (You could have the CALL Alias execute a script that does both). Changes - November 10 - The scheduler accounting system now does not operate on "TERM" type dials, so it does not dial less often to these systems if they are busy. - One Note: currently, UUCP dials (systems looked up in the UUSPOOL: directory, don't use this system either). Anything that uses Xferq (other than TERM types) does. Changes - November 7 - Fixed a couple windows up. The introduction of Public Screens wasn't completely finished :-) Changes - November 4 - Bug fix - the system wasn't allowing the situation where the user didn't have any AKA's configured. It defaulted to having one, which caused problems with the written script. ****************************************************** - Changes from March to October 93 Deleted - ****************************************************** Note: You *MUST* be running SUSHI or have a terminal connected to your internal serial port to use the current debugging versions of wpl.library and xferq.library. Unless otherwise stated, you will be running debug versions of the librarys if you got them with this archive. -----------------------------------------------------------------------