error_codes.htmlTEXTGoMk7#µ.6µ73 Macintosh Error Codes

See this special section called Positive Error Codes 1-31 in Detail, for further details on these common occurring error messages.

There are a few small applications that you can download from any Mac web, ones that I find very useful are: System Errors, Easy Errors and Apple Error Codes '98. You may also find, to a limited degree, that Extension Overload and InformINIT, also cover some Mac error codes.

Try out this excellent 'encyclopedia' of MacOS error codes, it's called Black & Bleu, it's shareware, but it has every single error code listed, and even has extensive details on quiet a few of them. It can be downloaded off any decent Mac shareware web site.

Positive error codes are often, confusingly, referred to as a Type xx Error (xx = usually a positive error number).

NOTE: "--" in the listing below, means that an error does not exist for this number.

Negative Codes - Obscure Error Codes

POSITIVE ERROR CODES
Code Error Name Error Description
0 noErr The operation succeeded.
1 dsBusError Bus error.
2 dsAddressErr Address error.
3 dsIllInstErr Illegal instruction error.
4 dsZeroDivErr Zero divide error.
5 dsChkErr Check trap error.
6 dsOvflowErr Overflow trap error.
7 dsPrivErr Privilege violation error.
8 dsTraceErr Trace mode error.
9 dsLineAErr Line 1010 trap error.
10 dsLineFErr Line 1111 trap error.
11 dsMiscErr Miscellaneous hardware exception error (code that doesn't exist).
12 dsCoreErr Unimplemented core routine error.
13 dsIrqErr Uninstalled interrupt error.
14 dsIOCoreErr IO Core Error.
15 dsLoadErr Segment Loader Error.
16 dsFPErr Floating point error.
17 dsNoPackErr Package 0 not present [List Manager].
18 dsNoPk1 Package 1 not present [Reserved by Apple].
19 dsNoPk2 Package 2 not present [Disk Initialization].
20 dsNoPk3 Package 3 not present [Standard File].
21 dsNoPk4 Package 4 not present [Floating-Point Arithmetic].
22 dsNoPk5 Package 5 not present [Transcendental Functions].
23 dsNoPk6 Package 6 not present [International Utilities].
24 dsNoPk7 Package 7 not present [Binary/Decimal Conversion].
25 dsMemFullErr Out of memory!
26 dsBadLaunch Can't launch file.
27 dsFSErr File system map has been trashed.
28 dsStknHeap Stack has moved into application heap.
30 dsReinsert Request user to re-insert off-line volume.
31 dsNotThe1 Not the disk I wanted (obsolete).
32 EPIPE Broken pipe.
33 negZcbFreeErr ZcbFree has gone negative.
34 ERANGE Math result not representable.
35 EDEADLK Call would block so was aborted.
36 transform_move_too_large N/A.
37 btbadHdr Bad BTree header record detected.
38 ENOTSOCK Socket operation on non-socket.
39 EDESTADDRREQ Destination address required.
40 dsGreeting Welcome to Macintosh greeting.
41 dsFinderErr Can't load the Finder error.
42 dsBadStartupDisk Unable to mount boot volume (obsolete).
43 dsSystemFileErr Can't find System file to open (obsolete).
44 ESOCKTNOSUPPORT Socket type not supported.
45 EOPNOTSUPP Operation not supported on socket.
46 viewPort_clip_no_intersection N/A
47 viewPort_scale_too_small N/A.
48 EADDRINUSE Address already in use.
49 EADDRNOTAVAIL Can't assign requested address.
50 ENETDOWN Network is down.
50 cmnotempty Directory CNode not empty (valence = 0).
51 dsBadSlotInt Unserviceable slot interrupt.
52 ENETRESET Network dropped connection on reset
53 EXONNABORTED Software caused connection abort.
54 ECONNRESET Connection reset by peer.
55 ENOBUFS No buffer space available.
56 EISCONN Socket is already connected.
57 ENOTCONN Socket is not connected.
58 ESHUTDOWN Can't send after socket shutdown.
59 ETOOMANTREFS Too many references: can't splice.
60 ETIMEDOUT Connection timed out.
61 ECONNREFUSED Connection refused.
62 ViewDevice_skew_too_large N/A
63 --
64 EHOSTDOWN Host is down.
65 EHOSTUNREACH No route to host.
66 --
67 --
68 --
69 --
70 EPROTO N/A
71 ETIME. N/A
72 ENOSR N/A
73 EBADMSG N/A
74 ECANCEL N/A
75 ENOSTR N/A
76 ENODATA N/A
77 EINPROGRESS N/A
78 ESRCH N/A
79 ENOMSG N/A
80 --
81 dsBadSANEopcode Bad opcode given to SANE Pack4.
82 --
83 dsBadPatchHeader SetTrapAddress saw the "come-from" header.
84 menuPrgErr Happens when a menu is purged.
85 dsMBarNFnd SysErr - cannot find MBDF.
86 dsHMenuFindErr SysErr - recursively defined HMenus.
87 dsWDEFnFnd Could not load WDEF.
88 dsCDEFnFnd Could not load CDEF.
89 dsMDEFnFnd Could not load MDEF.
90 dsNoFPU FPU instruction executed, but machine has no FPU.
91 --
92 --
93 --
94 --
95 --
96 --
97 --
98 dsNoPatch Can't patch for particular Model Mac.
99 dsBadPatch Can't load patch resource.
100 --
101 dsParityErr Memory parity error.
102 dsOldSystem System is too old for this ROM.
103 ds32BitMode Booting in 32-bit on a 24-bit system.
104 dsNeedToWriteBootBlocks Need to write new boot blocks.
105 dsNotEnoughRAMToBoot Need at least 1.5MB of RAM to boot 7.0.
106 dsBufPtrTooLow bufPtr moved too far during boot.
107 --
108 --
109 --
110 --
111 --
112 dsVMDeferredFuncTableFull VM's (virtual memory) DeferUserFn table is full.
113 dsVMBadBackingStore An error occurred while reading or writing the VM backing store file.
114 dsCantHoldSystemHeap The Mac was unable to hold the system heap during boot.
115 --
116 dsSystemREquiresPowerPC The startup disk requires a PowerPC.
117 dsGibblyMovedToDisabledFolder The active gibbly was disabled during boot.
118 dsUnBootableSystem The active system file will not boot on this system because it was designed only to boot from a CD.
119 dsMustUseFCBAccessors Attempted to access the OpenFileList directly.
120 --
121 --
122 --
123 --
124 --
125 --
126 --
127 errUserSElectPPD This error is not shown to the user, it is used when the user has selected the 'SelectPPD' in the Setup Option dialogue.
128 dsWriteToSupervisor StackGuardPage The supervisor stack overflowed into it's guard page.
1001 kInvalidRequestForGuestErr When guests try to make database requests.
1002 kInvalidSessionErr When client sends a non-existing session ID.
1003 kRequestIDNotFoundErr When client tries to cancel an invalid request.
1004 kSessionIDNotFoundErr When client tries to log off with invalid session.
1005 kTranscationFailedErr Requested pls transaction failed.
1006 kInvalidSourceIDErr When client sends a non-existing info source ID.
1007 kInvalidDoolIDErr When client sends a non-existing document ID.
1008 kNoAccessPriviligesErr When client tries to access a file for which he doesn't have access.
1009 kDerverGoingDownErr When the server is in the process of shutting down.
1010 kInvalidObjectIDErr Object ID for ObjectRequest is bad.
1011 kNoSharingOnServerErr Server doesn't have File Sharing or Appleshare running.
1012 kWrongProtocolErr Client is using the wrong protocol version.
1013 kFileNotFoundErr GetFile wasn't able to locate the file.
1014 kDuplicateNameErr Tried to add reporter with name that exists.
1015 kTooManyUsersErr Maximum number of users already logged in.
1016 kInfoSourceHiddenErr Info source on which you tried to execute this request is Hidden.
1017 kNoQueryStringErr When client sends a zero-length query string.
1018 kQueryStringTooLongErr When a client sends a very long query string.
1019 kInvalidMinRankErr Min rank requested not in the range (1..5).
1020 kInvalidMacHitsErr Max hits requested <= 0 on search request.
1021 kInvalidMacTermsErr Mac terms requested <= 0 on related terms request.
1022 kInvalidTextBoundsErr The startByte/endByte combo doesn't make sense.
1023 kInvalidOperationErr Invalid operation in DBObject/DBDReporter request.
1024 kInvalidObjectTypeErr Invalid objectType in DBObject/DBEnumerate request.
1025 kInvalidObjectNameErr Bogus objectName.
1026 kInvalidObjectDateErr objectDateSize is bogus.
1027 kInvalidFlagsErr Flags field is invalid (DBReporter/GetFile).
1028 kInvalidSubSessionIDErr Invalid subsessionID.
1029 kDuplicateTickleErr Duplicate Tickle request.
1030 kParamErr Received a mal-formed request (too short, or too long).
1031 kInternalErr Bad things happened on the Server. May be time to restart.
1032 kQuerySyntaxErr Syntax error in query.
1033 kFileModSinceIndexErr The file has been modified since indexing, so you can't do GetText on it.
xOpen Transport/PPP Error Codes (also, see errors -3150)
7102 N/A OT/PPP did not load properly at system start up.
7103 N/A OT/PPP could not set up a port.
7104 N/A OT/PPP is out of memory.
7105 N/A The requested action is not supported.
7106 N/A One or more resources are missing from OT/PPP's installed files.
7107 N/A The Remote Access Connections file is not compatible with the installed version of OT/PPP.
7108 N/A An action requiring a connection was requested when there was no connection.
7109 N/A The connection attempt or established connection was terminated by the user.
7110 N/A The user name is unknown.
7111 N/A The password is invalid.
7112 N/A An unexpected error with no useful information has occurred.
7113 N/A One or more of the installed OT/PPP files is damaged.
7114 N/A The requested action could not be performed because OT/PPP was busy.
7115 N/A The OT/PPP logical port is in an unknown state.
7116 N/A The OT/PPP logical port is in an invalid state.
7117 N/A The OT/PPP logical port has detected an invalid serial protocol.
7118 N/A Login is disabled for the given user.
7120 N/A The server administrator requires the user to enter a password.
7122 N/A OT/PPP could not initialize Open Transport.
7123 N/A The requested action could not be performed because OT/PPP is not fully initialized yet.
7124 N/A TCP/IP is inactive and cannot be loaded.
7125 N/A TCP/IP is not yet configured.
7126 N/A PPP is not selected as the TCP/IP interface in the current TCP/IP configuration.
7128 N/A The requested PPP protocol was rejected by the PPP peer.
7129 N/A PPP authentication failed.
7130 N/A PPP negotiation failed.
7131 N/A PPP was disconnected locally.
7132 N/A The PPP peer disconnected unexpectedly.
7133 N/A The PPP peer is not responding.
7134 N/A The OT/PPP log file is not open.
7135 N/A The OT/PPP log file is already open.
7136 N/A The OT/PPP log entry could not be retrieved.
7138 N/A OT/PPP can not locate the active System Folder.
7139 N/A OT/PPP can not locate its Preferences folder.
7140 N/A There is a pre-existing file using an OT/PPP type or creator.
7141 N/A There is a pre-existing folder using an OT/PPP folder name & location.
7142 N/A The Remote Access Connections file is not open.
7144 N/A An unknown PPP control protocol type was received.
7145 N/A PPP received a packet with an invalid length.
7146 N/A PPP received a negotiable option with an invalid value.
7147 N/A PPP received a negotiable option with invalid flags.
7148 N/A PPP ran out of memory while negotiating with the peer.
7152 N/A PPP encountered an error with no useful information.
7153 N/A PPP is in an invalid state.
7163 N/A The user cancelled the password entry dialog.
7164 N/A The user did not respond to the password entry dialog in time.
7165 N/A An unknown Open Transport serial port was referenced.
7166 N/A The OT/PPP logical port is not configured.
7167 N/A No AppleTalk services endpoints are available.
7168 N/A The user cancelled the modem script ASK or the Manual Dialing dialog.
20000 dsShutDownOrRestart User choice between ShutDown and Restart.
20001 dsSwitchOffOrRestart User choice between Switch off or Restart.
20002 dsForcedQuit Allow the user to ExitToShell, return if Cancel.
32767 dsSysErr General system error (catch-all used in DSAT).

NEGATIVE ERROR CODES
0 noErr 0 for success.
-1 qErr Queue element not found during deletion.
-2 vTypErr Invalid queue element.
-3 corErr Core routine number out of range.
-4 unimpErr Unimplemented core routine.
-5 SlpTypeErr Invalid queue element.
-6 --
-7 --
-8 seNoDB No debugger installed to handle debugger command.
xColour Manager Errors
iTabPurgErr From Color2Index/ITabMatch.
noColMatch N/A
-11 qAllocErr From MakeITable.
-12 tblAllocErr N/A
-13 overRun N/A
-14 noRoomErr N/A
-15 seOutOfRange From SetEntry.
-16 seProtErr N/A
-17 i2CRangeErr N/A
-18 gdBadDev N/A
-19 reRangeErr N/A
-20 seInvRequest N/A
-21 seNoMemErr N/A
xI/O System Errors
-17 controlErr Driver can't respond to Control call.
-18 statusErr Driver can't respond to Status call.
-19 readErr Driver can't respond to Read call.
-20 writErr Driver can't respond to Write call.
-21 badUnitErr Driver reference number doesn't match unit table.
-22 unitEmptyErr Driver reference number specifies NIL handle in unit table.
-23 openErr Requested read/write permission doesn't match driver's open permission or attempt to open RAM serial driver failed.
-24 closErr Close failed, or permission to close .MPP driver was denied.
-25 dRemovErr Tried to remove an open driver.
-26 dInstErr DrvrInstall couldn't find driver in resources, or abort error.
-27 abortErr IO call aborted by KillIO.
-28 notOpenErr Couldn't rd/wr/ctl/sts cause driver not opened.
-29 unitTblFullErr Unit table has no more entries.
-30 dceExtErr DCE extension error.
-31 --
-32 --
xFiling System Errors
-33 dirFulErr Directory full.
-34 dskFulErr Disk full.
-35 nsvErr No such volume, or volume not found.
-36 ioErr I/O error.
-37 bdNamErr Bad file name; there may be no bad names in the final system!
-38 fnOpnErr File not open.
-39 eofErr End of file, or no additional data in the format.
-40 posErr Tried to position to before start of file (r/w).
-41 mFulErr Memory full (open) or file won't fit (load).
-42 tmfoErr Too many files open.
-43 fnfErr File/Folder/Edition container/Target not found.
-44 wPrErr Disk is write-protected; Volume is locked through hardware.
-45 fLckdErr File is locked, or publisher writing to an edition.
-46 vLckdErr Volume is locked through software.
-47 fBsyErr File is busy (delete); Section doing I/O.
-48 dupFNErr Duplicate filename (rename); File found instead of folder.
-49 opWrErr File already open with write permission.
-50 paramErr Error in user parameter list.
-51 rfNumErr Reference number invalid.
-52 gfpErr Get file position error.
-53 volOffLinErr Volume is off line.
-54 permErr Permission error on file open, or software lock on file.
-55 volOnLinErr Drive volume already on-line at MountVol.
-56 nsDrvErr No such drive (tried to mount a bad drive number).
-57 noMacDskErr Not a Macintosh disk (signature bytes are wrong).
-58 extFSErr. External file system, file system identifier is non-zero.
-59 fsRnErr File system internal error: during rename the old entry was deleted but could not be restored.
-60 badMDBErr Bad master directory block.
-61 wrPermErr Write permission error.
-62 --
-63 --
xFont Manager Errors
-64 fontDecError Error during font declaration.
-65 fontNotDeclared Font not declared.
-66 fontSubErr Font substitution occurred.
xDisk Errors
-64 lastDskErr Last disk error.
-64 noDriveErr Drive not installed.
-65 offLinErr Read/write requested for an off-line drive.
-66 noNybErr Couldn't find 5 nibbles in 200 tries.
-67 noAdrMkErr Couldn't find valid address mark.
-68 dataVerErr Read verify compare failed.
-69 badCksmErr Address mark checksum didn't check.
-70 badBtSlpErr Bad address mark bit slip nibbles.
-71 noDtaMkErr Couldn't find a data mark header.
-72 badDCksum Bad data mark checksum.
-73 badDBtSlp Bad data mark bit slip nibbles.
-74 wrUnderrun Write under-run occurred.
-75 cantStepErr Step handshake failed.
-76 tk0BadErr Track 0 detect doesn't change.
-77 initIWMErr Unable to initialise IWM.
-78 twoSideErr Tried to read second side on a one sided drive.
-79 spdAdjErr Unable to correctly adjust disk speed.
-80 seekErr Track number wrong on address mark.
-81 sectNFErr Sector number never found on a track.
-82 fmt1Err Can't find sector 0 after track format.
-83 fmt2Err Can't get enough sync.
-84 verErr Track failed to verify.
-84 firstDskErr First disk error.
xSerial Ports, PRAM/Clock
-85 clkRdErr Unable to read same clock value twice.
-86 clkWrErr Time written did not verify.
-87 prWrErr Parameter RAM written didn't read-verify.
-88 prInitErr InitUtil found the parameter RAM uninitialized.
-89 rcvrErr SCC receiver error (framing, parity, OR).
-90 breakRecd Break received (SCC).
xAppleTalk Errors
-91 ddpSktErr Error opening socket, or invalid address or table is full.
-92 ddpLenErr Data length too big.
-93 noBridgeErr No network bridge for non-local send.
-94 lapProtErr Error in attaching/detaching protocol.
-95 excessCollsns Hardware error [excessive collisions on write].
-96 portNotPwr The serial port is not currently powered.
-97 portInUse Driver Open error code (port is in use).
-98 portNotCf Driver Open error code (parameter RAM not configured for this connection).
xMemory Manager Errors
-99 memROZErr Hard error in ROZ.
-99 memROZError Hard error in ROZ.
-99 memROZWarn Soft error in ROZ.
xScrap Manager Errors
-100 noScrapErr No scrap exists error.
-101 KNSLPluginNotKilled N/A.
-102 noTypeErr Format not available, or no object of that type in scrap.
-103 --
-104 --
-105 --
-106 --
-107 --
xMemory Allocation Errors
-108 memFullErr Ran out of memory, or not enough room in heap zone.
-109 nilHandleErr GetHandleSize fails on baseText or substitutionText, NIL master pointer, handle was NIL in HandleZone or other.
-110 memAdrErr Address was odd, or out of range.
-111 memWZErr Attempted to operate on a free block; GetHandleSize fails on baseText or substitutionText, or WhichZone failed (applied to free block).
-112 memPurErr Trying to purge a locked or non-purgeable block.
-113 memAZErr Address in zone check failed.
-114 memPCErr Pointer Check failed.
-115 memBCErr Block Check failed.
-116 memSCErr Size Check failed.
-117 memLockedErr Trying to move a locked block (MoveHHi).
-118 --
-119 --
xHFS Errors
-120 dirNFErr Directory not found.
-121 tmwdoErr No free WDCB available.
-122 badMovErr Move into offspring error.
-123 wrgVolTypErr Not an HFS volume or operation not supported for MFS (obsolete).
-124 volGoneErr Server volume has been disconnected.
-125 updPixMemErr Insufficient memory to update a pixmap.
-127 fsDSIntErr Internal file system error.
xMenu Manager Errors
-126 dsMBarNFnd System error code for MBDF not found.
-127 dsHMenuFindErr Couldn't find HMenu's parent in MenuKey.
-128 userCanceledErr User cancelled an operation.
-129 --
xHFS File ID Errors
-130 fidNotFound No file thread exists.
-131 fidNotAFile Directory specified; it is not a file.
-132 fidExists File ID already exists.
-133 --
-134 --
-135 --
-136 --
-137 --
-138 --
-139 --
-140 --
-141 --
-142 --
-143 --
-144 --
xColour QuickDraw and Colour Manager Errors
-145 noMemForPictPlaybackErr No memory available to playback a picture/movie.
-146 --
-147 rgnTooBigError Region too big or complex.
-148 pixMapTooBigErr Pixel map record pixelmap is too large.
-149 nsStackErr Not enough stack space for the necessary buffers 'OR'.
-150 cMatchErr Color2Index failed to find an index.
-151 cTempMemErr Failed to allocate memory for temporary structures.
-152 cNoMemErr Failed to allocate memory for structure.
-153 cRangeErr Range error on colorTable request.
-154 cProtectErr ColorTable entry protection violation.
-155 cDevErr Invalid type of graphics device.
-156 cResErr Invalid resolution for MakeITable.
-157 cDepthErr Invalid pixel depth.
-158 cParmErr Invalid parameter.
-159 --
-160 --
-161 --
-162 --
-163 --
-164 --
-165 --
-166 --
-167 --
-168 --
-169 --
xColourSync Errors
-170 cmProfileError N/A.
-171 cmMethodError Error occurred during the CMM process that decides the CMM to use (part of ColorSync).
-172 --
-173 --
-174 --
-175 cmMethodNotFound CMM is not present.
-176 cmProfileNotFound N/A.
-177 cmProfilesIdentical The profiles are the same.
-178 cmCantConcatenateError The profile can't be concatenated.
-179 cmCantXYZ CMM can't handle XYZ space.
-180 cmCantDeleteProfile N/A.
-181 cmUnsupportedSataType N/A.
-182 cmNoCurrentProfile N/A.
-183 --
-184 --
xResource Manager Errors (other than I/O)
-185 badExtResource Extended resource has a bad format.
-186 CantDecompress Resource bent ('the bends') can't decompress a compressed resource.
-187 --
-188 resourceInMemory Resource already in memory.
-189 writingPastEnd Writing past end of file.
-190 inputOutOfBounds Offset or count out of bounds.
-191 --
-192 resNotFound Resource not found.
-193 resFNotFound Resource file not found.
-194 addResFailed Add Resource failed.
-195 addRefFailed Add Reference failed.
-196 rmvResFailed Remove Resource failed.
-197 rmvRefFailed Remove Reference failed.
-198 resAttrErr Attribute inconsistent with operation.
-199 mapReadErr Map inconsistent with operation.
xSound Manager Errors
-200 noHardware No hardware support for the specified synthesizer.
-201 notEnoughHardware No more channels for the specified synthesizer.
-202 --
-203 queueFull No room in the queue.
-204 resProblem Problem loading the resource.
-205 badChannel Channel is corrupt or unusable [invalid channel queue length].
-206 badFormat Resource is corrupt (handle to 'snd' resource was invalid).
-207 notEnoughBufferSpace Insufficient memory available.
-208 badFileFormat File is corrupt or unusable, or not AIFF or AIFF-C.
-209 channelBusy Channel is being used for a PFD already.
-210 buffersTooSmall Cannot operate in the memory allowed.
-211 channelNotBusy Channel not currently used.
-212 noMoreRealTime Not enough CPU time available.
-213 badParam A parameter is incorrect.
-214 --
-215 --
-216 --
-217 --
-218 --
-219 --
-220 siNoSoundInHardware No sound input hardware available.
-221 siBadSoundInDevice Invalid index for SoundInGetIndexedDevice.
-222 siNoBufferSpecified No buffer specified.
-223 siInvalidCompression Invalid compression type.
-224 siHardDriveTooSlow Hard drive too slow to record.
-225 siInvalidSampleRate Invalid sample rate.
-226 siInvalidSampleSize Invalid sample size.
-227 siDeviceBusyErr Sound input device is busy.
-228 siBadDeviceName Invalid device name.
-229 siBadRefNum Invalid reference number.
-230 siInputDeviceErr Input device hardware failure.
-231 siUnknownInfoType Driver returned invalid info type selector.
-232 siUnknownQuality Invalid quality selector returned by driver.
-233 --
-234 --
-235 --
-236 --
-237 --
-238 --
-239 --
-240 noSynthFound No SPEECH device could be located.
-241 SynthOpenFailed The SPEECH device could not be accessed.
-242 SunthNotReady The SPEECH device is offline.
-243 bufTooSmall A SPEECH buffer was too small.
-244 voiceNotFound The requested voice wasn't found.
-245 incompatibleVoice The requested voice could not be faked.
-246 badDictFormat The SPEECH dictionary format is bad.
-247 badInputText Something is wrong with the SPEECH text.
-248 --
-249 --
xMIDI Manager Errors
-250 midiNoClientErr No client with that ID found.
-251 midiNoPortErr No port with that ID found.
-252 midiTooManyPortsErr Too many ports already installed in the system.
-253 midiTooManyConsErr Too many connections made.
-254 midiVConnectErr Pending virtual connection created.
-255 midiVConnectMade Pending virtual connection resolved.
-256 midiVConnectRmvd Pending virtual connection removed.
-257 midiNoConErr No connection exists between specified ports.
-258 midiWriteErr Couldn't write to all connected ports.
-259 midiNameLenErr Name supplied is longer than 31 characters.
-260 midiDupIDErr Duplicate client ID.
-261 midiInvalidCmdErr Command not supported for port type.
-262 to
-289		 --
-290 smSDMInitErr The SDM could not be initialised.
-291 smSRTInitErr The Slot Resource Table could not be initialised.
-292 smPRAMInitErr The Slot PRAM entry could not be initialised.
-293 smPriInitErr The Cards could not be initialised.
xNotification Manager Error
-299 nmTypErr Invalid queue Type - must be ORD(nmType).
xStart Manager Errors
-290 smSDMInitErr SDM could not be initialized.
-291 smSRTInitErr Slot Resource Table could not be initialized.
-292 smPRAMInitErr Slot Resource Table could not be initialized.
-293 smPriInitErr Cards could not be initialized.
-300 smEmptySlot No card in slot.
-301 smCRCFail CRC check failed for declaration data.
-302 smFormatErr FHeader Format is not Apple's.
-303 smRevisionErr Wrong revision level.
-304 smNoDir Directory offset is Nil.
-305 smDisabledSlot This Slot is disabled.
-306 smNosInfoArray No sInfoArray. Memory Mgr error.
-307 smResrvErr Fatal reserved error. Reserved field <> 0.
-308 smUnExBusErr Unexpected BusError.
-309 smBLFieldBad ByteLanes field was bad.
-310 smFHBlockRdErr Error occurred during _sGetFHeader.
-311 smFHBlkDispErr Error occurred during _sDisposePtr (dispose of FHeader block).
-312 smDisposePErr Dispose Pointer error.
-313 smNoBoardsRsrc No Board sResource.
-314 smGetPRErr Error occurred during _sGetPRAMRec (See SIMStatus).
-315 smNoBoardId No Board Id.
-316 smIntStatVErr The InitStatusV field was negative after primary or secondary init.
-317 smIntTblVErr An error occurred while trying to initialize the Slot Resource Table.
-318 smNoJmpTbl SDM jump table could not be created.
-319 smBadBoardId BoardId was wrong, re-init the PRAM record.
-320 smBusErrTO BusError time out.
-330 smBadRefId Reference Id not found in List.
-331 smBadsList Bad sList: Id1<Id2<Id3, format is not followed.
-332 smReservedErr Reserved field not zero.
-333 smCodeRevErr Code revision is wrong.
-334 smCPUErr Code revision is wrong.
-335 smsPointerNil LPointer is nil {from sOffsetData, if this error occurs, check sInfo record for more information).
-336 smNilsBlockErr Nil sBlock error (Don't allocate and try to use a nil sBlock).
-337 smSlotOOBErr Slot out of bounds error.
-338 smSelOOBErr Selector out of bounds error.
-339 smNewPErr NewPtr error.
-340 smBlkMoveErr BlockMove error.
-341 smCkStatusErr Status of slot = fail.
-342 smGetDrvrNamErr Error occurred during _sGetDrvrName.
-343 smDisDrvrNamErr Error occurred during _sDisDrvrName.
-344 smNoMoresRsrcs No more sResources.
-345 smsGetDrvrErr .Error occurred during _sGetDriver.
-346 smBadsPtrErr Bad pointer was passed to sCalcsPointer.
-347 smByteLanesErr NumByteLanes was determined to be zero.
-348 smOffsetErr Offset was too big (temporary, should be fixed).
-349 smNoGoodOpens No opens were successful in the loop.
-350 smSRTOvrFlErr SRT over flow.
-351 smRecNotFnd Record not found in the SRT.
xDevice Manager Slot Support Errors
-360 slotNumErr Invalid slot # error.
-400 gcrOnMFMErr GCR format on high density media error.
xEdition Manager Errors
-450 editionMgrInitErr Edition manager not inited by this application.
-451 badSectionErr Not a valid section record.
-452 notRegisteredSectionErr Not a registered section record.
-453 badEditionFileErr Edition file is corrupt.
-454 badSubPartErr Cannot use sub parts in this release.
-460 multiplePublisherWrn Pub already registered for container.
-461 containerNotFoundWrn Couldn't find editionContainer now.
-462 containerAlreadyOpenWrn Container is open by this section.
-463 notThePublisherWrn Different pub last wrote that container.
xSCSI Manager Errors
-470 scsiBadPBErr Invalid field(s) in the parameter block.
-471 scsiOverrunErr Attempted to transfer too many bytes.
-472 scsiTransferErr Write flag conflicts with data transfer phase.
-473 scsiBusTOErr Bus error during transfer.
-474 scsiSelectTOErr scsiSelTO exceeded (selection failed).
-475 scsiTimeOutErr scsiReqTO exceeded.
-476 scsiBusResetErr The bus was reset, so your request was aborted.
-477 scsiBadStatus Non-zero (not 'Good') status returned.
-478 scsiNoStatusErr Device did not go through a status phase.
-479 scsiLinkFailErr Linked command never executed.
-489 scsiUnimpVctErr Unimplemented routine was called SysErrs used instead.
xSysErrs used instead of inline $A9FF & $ABFF
-490 userBreak User debugger break.
-491 strUserBreak User debugger break - display string on stack.
-492 exUserBreak User debugger break - execute commands on stack.
xQuickDraw Error
-500 rgnTooBigErr Bitmap would convert into a region greater than 64 KB.
xText Edit Error
-501 teScrapSizeErr Scrap item too big for text edit record.
xOperating System Error
-502 hwParamrErr Bad selector for _HWPriv.
xProcesses Errors
-600 procNotFound No eligible process with specified process serial number.
-601 memFragErr Not enough room to launch application with special requirements.
-602 appModeErr Memory mode is 32-bit, but application is not 32-bit clean.
-603 protocolErr Application made module calls in improper order.
-604 hardwareConfigErr Hardware configuration not correct for call.
-605 appMemFullErr Application size is not big enough for launch.
-606 appIsDaemon Application is BG-only, and launch flags disallow this.
-607 bufferIsSmall Buffer is too small.
-608 noOutstandingHLE No outstanding high-level event.
-609 connectionInvalid Connection is invalid.
-610 noUserInteractionAllowed Attempted Post High Level Event from background and no session yet established Memory Dispatch Errors.
xMemory Dispatch Errors
-620 notEnoughMemoryErr Insufficient physical memory.
-621 notHeldErr Specified range of memory is not held.
-622 cannotMakeContiguousErr Cannot make specified range contiguous.
-623 notLockedErr Specified range of memory is not locked.
-624 interruptsMaskedErr Called with interrupts masked.
-625 cannotDeferErr Unable to defer additional user functions.
xDatabase Access (Pack 13) Errors
-800 rcDBNull The data item was NULL.
-801 rcDBValue Data available or successfully retrieved.
-802 rcDBError Error executing function.
-803 rcDBBadType Next data item not of requested data type.
-804 rcDBBadCol Function timed out.
-805 rcDBBreak Query currently executing.
-806 rcDBExec Session ID is invalid.
-807 rcDBBadSessID Invalid session number.
-808 rcDBBadSessNum Couldn't find the specified database extension, or error occurred in opening database extension.
-809 rcDBBadDDEV The database extension does not support asynchronous calls.
-810 rcDBCancel Invalid parameter block specified.
-811 rcDBAsyncNotSupp There is no handler for this data type installed for the current application.
-812 rcDBBadAsyncPB N/A
-813 rcDBNoHandler The InitDBPack function has not yet been called.
-814 rcDBWrongVersion The wrong version was called.
-815 rcDBPackNotInited Pack not inited.
-816 rcDBStatusCancel Status was cancelled.
xHelp Manager Errors
-850 hmHelpDisabled Help balloons are not enabled.
-851 hmResNotFound Help Manager resource not found.
-852 hmMemFullErr Help Manager, memory full error.
-853 hmBalloonAborted Because of constant cursor movement, help balloon wasn't displayed.
-854 hmBadHelpData Balloon Menu and item are same as previous menu and item.
-855 hmHelpManagerNotInited Help menu not set up.
-856 hmBadSelector Help Manager has a bad selector.
-857 hmSkippedBalloon No balloon content to fill in.
-858 hmWrongVersion Wrong version of Help Manager resource.
-859 hmUnknownHelpType Help message record contained a bad type.
-860 hmCouldNotLoadPackage Help Manager could not load package.
-861 hmOperationUnsupported Bad method parameter.
-862 hmNoBalloonUp No balloon showing.
-863 hmCloseViewActive User using CloseView won't let you remove balloon.
xAppleTalk: PPC Toolbox Errors
-900 notInitErr PPC Toolbox has not been initialized yet.
-902 nameTypeErr Invalid or inappropriate locationKindSelector in location name.
-903 noPortErr Invalid port name; Unable to open port or bad port reference number.
-904 noGlobalsErr System unable to allocate memory, critical error.
-905 localOnlyErr Network activity is currently disabled.
-906 destPortErr Port does not exist at destination.
-907 sessTableErr PPC Toolbox is unable to create a session.
-908 noSessionErr Invalid session reference number.
-909 badReqErr Bad parameter or invalid state for this operation.
-910 portNameExistsErr Another port is already open with this name.
-911 noUserNameErr User name unknown on destination machine.
-912 userRejectErr Destination rejected the session request.
-913 noMachineNameErr User hasn't named his Macintosh.
-914 noToolboxNameErr A system resource is missing, not too likely.
-915 noResponseErr Unable to contact application.
-916 portClosedErr The port was closed.
-917 sessClosedErr The session has closed.
-919 badPortNameErr PPC port record is invalid.
-922 noDefaultUserErr User has not specified owner name in Sharing Setup Control Panel.
-923 notLoggedInErr Default user reference number does not yet exist.
-924 noUserRefErr Unable to create a new user reference number.
-925 networkErr An error has occurred in the network.
-926 noInformErr PPCStart failed because target program did not have an inform pending.
-927 authFailErr User's password is wrong.
-928 noUserRecErr Invalid user reference number.
-930 badServiceMethodErr Service method is other than ppcServiceRealTime.
-931 badLocNameErr Location name is invalid.
-932 guestNotAllowedErr Destination port requires authentication.
xAppleTalk: NBP Errors
-1024 nbpBuffOvr Buffer overflow in LookupName.
-1025 nbpNoConfirm Name not confirmed on ConfirmName.
-1026 nbpConfDiff Name confirmed at different socket.
-1027 nbpDuplicate Duplicate name exists already.
-1028 nbpNotFound Name not found on remove.
-1029 nbpNISErr Error trying to open the NIS.
xASP Errors (XPP driver)
-1066 aspBadVersNum Server cannot support this ASP version.
-1067 aspBufTooSmall Buffer too small.
-1068 aspNoMoreSess No more sessions on server.
-1069 aspNoServers No servers at that address.
-1070 aspParamErr Parameter error.
-1071 aspServerBusy Server cannot open another session.
-1072 aspSessClosed Session closed.
-1073 aspSizeErr Command block too big.
-1074 aspTooMany Too many clients (server error).
-1075 aspNoAck No Ack on attention request (server error).
xAppleTalk: ATP Errors
-1096 reqFailed Request to contact router failed: retry count exceeded.
-1097 tooManyReqs Too many concurrent requests.
-1098 tooManySkts Too many concurrent responding-sockets.
-1099 badATPSkt Bad ATP-responding socket.
-1100 badBuffNum Bad response buffer number specified.
-1101 noRelErr No release received.
-1102 cbNotFound Control Block not found; no pendingasynchronous calls.
-1103 noSendResp AddResponse issued without SendResponse.
-1104 noDataAre No data area for request to MPP.
-1105 reqAborted ERdCancel function called for ERead [SendRequest aborted by RelTCB].
xData Stream Protocol: DSP driver Errors
-1273 errOpenDenied Open request denied by recipient.
-1274 errDSPQueueSize Send or receive queue is too small.
-1275 errFwdReset Read terminated by forward reset.
-1276 errAttention Attention message too long.
-1277 errOpening Attempt to open connection failed.
-1278 errState Bad connection state for this operation.
-1279 errAborted Request aborted by dspRemove or dspClose function.
-1280 errRefNum Bad connection reference number.
xHFS Errors
-1300 fidNotFound File ID not found [No file thread exists].
-1301 fidExists File id already exists.
-1302 notAFileErr Specified file is a directory.
-1303 diffVolErr Files on different volumes.
-1304 catChangedErr Catalogue has changed and CatPosition may be invalid.
-1305 desktopDamagedErr The desktop database has become corrupted - the Finder will fix this, but if your application is not running with the Finder, use DTReset or DTDelete.
-1306 sameFileErr Can't exchange a file with itself.
-1307 badFidErr File ID is dangling or doesn't match file number.
-1308 notARemountErr If _Mount allows only remounts & doesn't get 1.
xAppleEvent Errors
-1700 errAECoercionFail Data could not be coerced to the requested description type.
-1701 errAEDescNotFound Description record was not found.
-1702 errAECorruptData Data in an Apple event could not be read.
-1703 errAEWrongDataType Wrong description type.
-1704 errAENotAEDesc Not a valid description record.
-1705 errAEBadListItem Operation involving a list item failed.
-1706 errAENewerVersion Need a newer version of the Apple Event Manager.
-1707 errAENotAppleEvent Event is not an Apple event.
-1708 errAEEventNotHandled
-1709 errAEReplyNotValid
-1710 errAEUnknownSendMode
-1711 errAEWaitCanceled
-1712 errAETimeout
-1713 errAENoUserInteraction
-1714 errAENotASpecialFunction
-1715 errAEParamMissed
-1716 errAEUnknownAddressType Unknown Apple event address type.
-1717 errAEHandlerNotFound
-1718 errAEReplyNotArrived
-1719 errAEIllegalIndex
xAppleTalk: ATP Errors
-3101 buf2SmallErr Buffer too small.
-3102 noMPPErr No MPP error.
-3103 ckSumErr Check sum error.
-3104 extractErr Extraction error.
-3105 readQErr Read queue error.
-3106 atpLenErr ATP length error.
-3107 atpBadRsp ATP bad response error.
-3108 recNotFnd Record not found.
-3109 sktClosedErr Socket closed error.
xOpen Transport Errors
-3150 kOTBadAddressErr The specified protocol address was in an incorrect format or contained illegal information.
-3151 kOTBadOptionErr The specified protocol options were in an incorrect format or contained illegal information.
-3152 kOTAccessErr The user does not have permission to negotiate the specified addressor options.
-3153 kOTBadReferenceErr The specified EndpointRef or TEndpoint * does not refer to a valid endpoint.
-3154 kOTNoAddressErr The endpoint could not allocate an address, or an address was required and not supplied by the client.
-3155 kOTOutStateErr The function was issued in the wrong sequence.
-3156 kOTBadSequenceErr An invalid sequence number was specified, or a NULL call pointer was specified when rejecting a connection request.
-3158 kOTLookErr An asynchronous event has occurred on this endpoint.
-3159 kOTBadDataErr The amount of client data specified was not within the bounds allowed by the endpoint.
-3160 kOTBufferOverflowErr The number of bytes allocated to hold a result is greater than zero, but not sufficient to store the result.
-3161 kOTFlowErr The endpoint is in asynchronous mode, but the flow control mechanism prevents the endpoint from accepting any data at this time.
-3162 kOTNoDataErr This endpoint is in non-blocking mode, but no data is currently available. It is also returned by LookupName when no names are found.
-3163 kOTNoDisconnectErr No disconnect indication is available.
-3164 kOTNoUDErrErr No unit data error indication currently exists on this endpoint.
-3165 kOTBadFlagErr An invalid flag was specified.
-3166 kOTNoReleaseErr No orderly release indication currently exists on this endpoint.
-3167 kOTNotSupportedErr This action is not supported by this endpoint.
-3168 kOTStateChangeErr The endpoint is undergoing a transient state change. This error is returned when a function call is made while an endpoint is in the process of changing states. The client should wait for an event indicating the endpoint has finished changing state and call the function again.
Note: The equivalent state-change error code, TSTATECHNG, is not described in the 1992 X/Open XTI specification. This error is also returned if you attempt to use an incompatible function while another operation is still ongoing (for example: calling SndUData while an OptionManagement call is still outstanding).
-3169 kOTStructureTypeErr An unsupported structure type was passed in the structType field. This error is also returned when the structType field is inconsistent with the endpoint type.
-3170 kOTBadNameErr The endpoint name is invalid.
-3171 kOTBadQLenErr The argument qlen when the endpoint was bound with Bind was zero.
-3172 kOTAddressBusyErr The requested address is in use, or this endpoint does not support multiple connections with the same local and remote addresses. This result code indicates that a connection already exists. As a return value for a Bind call, it may also indicate that no dynamic addresses are available for protocols or configuration methods that allow dynamic addressing.
-3173 kOTIndOutErr There are outstanding connection indications on the endpoint. All other connection indications must be handled either by rejecting them with SndDisconnect, or by accepting them with Accept.
-3174 kOTProviderMismatchErr The endpoint that is to accept the connection is not the same kind of endpoint as this one.
-3175 kOTResQLenErr When this endpoint was bound (see Bind), the qlen parameter was greater than zero. But to accept a connection on an alternate end-point, such as this one, the endpoint must be bound with a qlen parameter equal to zero.
-3176 kOTResAddressErr The address to which this endpoint is bound differs from that of the endpoint that received the connection request; thus, this endpoint cannot accept this connection request.
-3177 kOTQFullErr The maximum number of outstanding indications has been reached for the endpoint.
-3178 kOTProtocolErr An unspecified protocol error occurred.
-3179 kOTBadSyncErr A call to Sync was made at non-SystemTask time.
-3180 kOTCanceledErr An outstanding call was cancelled.
0000 kOTNoError The function completed execution without error.
xPrint Manager/LaserWriter Errors
-4096 N/A No free Connect Control Blocks available.
-4097 N/A Bad connection reference number.
-4098 N/A Request already active.
-4099 N/A Write request too big.
-4100 N/A Connection just closed.
-4101 N/A Printer not found, or closed.
xFile Manager Extensions Errors
-5000 accessDenied Incorrect access for this file/folder.
-5006 DenyConflict Permission/Deny mode conflicts with the current mode in which this fork is already open.
-5015 NoMoreLocks Byte range locking failure from Server.
-5020 RangeNotLocked Attempt to unlock an already unlocked range.
-5021 RangeOverlap Attempt to lock some of an already locked range.
xAFP Errors (XPP driver)
-5000 afpAccessDenied AFP access denied.
-5001 afpAuthContinue AFP authorisation continue.
-5002 afpBadUAM AFP bad UAM.
-5003 afpBadVersNum AFP bad version number.
-5004 afpBitmapErr AFP bit map error.
-5005 afpCantMove AFP can't move error.
-5006 afpDenyConflict AFP deny conflict.
-5007 afpDirNotEmpty AFP directory not empty.
-5008 afpDiskFull AFP disk full.
-5009 afpEofError AFP End-of-File error.
-5010 afpFileBusy AFP file busy.
-5011 afpFlatVo AFP flat volume.
-5012 afpItemNotFound AFP item not found.
-5013 afpLockErr AFP lock error.
-5014 afpMiscErr AFP misc error.
-5015 afpNoMoreLocks AFP no more locks.
-5016 afpNoServer AFP no server.
-5017 afpObjectExists AFP object already exists.
-5018 afpObjectNotFound AFP object not found.
-5019 afpParmErr AFP parameter error.
-5020 afpRangeNotLocked AFP range not locked.
-5021 afpRangeOverlap AFP range overlap.
-5022 afpSessClosed AFP session closed.
-5023 afpUserNotAuth AFP user not authorised.
-5024 afpCallNotSupported AFP call not supported.
-5025 afpObjectTypeErr AFP object type error.
-5026 afpTooManyFilesOpen AFP too many files open.
-5027 afpServerGoingDown AFP server going down.
-5028 afpCantRename AFP can't rename.
-5029 afpDirNotFound AFP directory not found.
-5030 afpIconTypeError AFP icon type error.
-5031 afpVolLocked Volume is Read-Only.
-5032 afpObjectLocked AFP Object is M/R/D/W inhibited.
-5033 afpContainsSharedErr Folder being shared has a shared folder
-5034 afpIDNotFound ID not found.
-5035 afpIDExists ID exists.
-5036 afpDiffVolErr Different volume error.
-5037 afpCatalogChanged Catalogue changed.
-5038 afpSameObjectErr Same object error.
-5039 afpBadIDErr Bad ID error.
-5040 afpPwdSameErr Same password on a mandatory password change.
-5041 afpPwdTooShortErr Password being set is too short.
-5042 afpPwdExpiredErr Password being used is too old.
-5043 afpInsideSharedErr Folder being shared is in a shared folder.
-5044 afpInsideTrashErr Folder being shared is in the trash folder.
xSysEnvirons Errors
-5500 envNotPresent SysEnvirons trap not present - returned by glue.
-5501 envBadVers Version non-positive.
-5502 envVersTooBig Version bigger than call can handle.
xGestalt Errors
-5550 gestaltUnknownErr Gestalt doesn't know the answer.
-5551 gestaltUndefSelectorErr Undefined code was passed to Gestalt.
-5552 gestaltDupSelectorErr Tried to add entry that already existed.
-5553 gestaltLocationErr Gestalt function not in system heap.
xLaserWriter Driver Errors
-8132 N/A Manual Feed time out.
-8133 N/A General PostScript Error.
-8150 N/A No LaserWriter chosen.
-8151 N/A Version mismatch between LaserPrep dictionaries.
-8150 N/A No LaserPrep dictionary installed.
-8160 N/A Zoom scale factor out of range.
xPicture Utilities Errors
-11000 pictInfoVersionErr Wrong version of the PictInfo structure.
-11001 pictInfoIDErr Internal consistency check is wrong.
-11002 pictInfoVerbErr The passed verb was invalid.
-11003 cantLoadPickMethodErr Unable to load the custom pick proc.
-11004 colorsRequestedErr The number of colours requested was illegal.
-11005 pictureDataErr The picture data was invalid.
xPower Manager Errors
-13000 pmBusyErr Power manager never ready to start handshake.
-13001 pmReplyTOErr Timed out waiting for reply.
-13002 pmSendStartErr During send, power manager did not start handshake.
-13003 pmSendEndErr During send, power manager did not finish handshake.
-13004 pmRecvStartErr During receive, power manager did not start handshake.
-13005 pmRecvEndErr During receive, power manager did not finish handshake.
xMac TCP Errors
-23000 ipBadLapErr Bad network configuration.
-23001 ipBadCnfgErr Bad IP configuration error.
-23002 ipNoCnfgErr Missing IP or LAP configuration error.
-23003 ipLoadErr Error in MacTCP load.
-23004 ipBadAddr Error in getting address.
-23005 connectionClosing Connection in closing.
-23006 invalidLength Invalid length.
-23007 connectionExists Request conflicts with existing connection.
-23008 connectionDoesntExist Connection does not exist.
-23009 insufficientResources Insufficient resources to perform request.
-23010 invalidStreamPtr Invalid stream Ptr.
-23011 streamAlreadyOpen Stream already open
-23012 connectionTerminated Connection terminated.
-23013 invalidBufPtr Invalid buffer Ptr.
-23014 invalidRDS Invalid RDS.
-23014 invalidWDS Invalid WDS
-23015 openFailed Open failure.
-23016 commandTimeout A command timed out.
-23017 duplicateSocket Duplicate socket error.
-23030 ipOpenProtErr Can't open new protocol, table full.
-23031 ipCloseProtErr Can't find protocol to close.
-23032 ipDontFragErr Packet too large to send without fragmenting.
-23033 ipDestDeadErr Destination not responding.
-23034 ipBadWDSErr Error in WDS format.
-23035 icmpEchoTimeoutErr ICMP echo timed-out.
-23036 ipNoFragMemErr No memory to send fragmented packet.
-23037 ipRouteErr Can't route packet off-net.
-23041 nameSyntaxErr Name has a syntax error.
-23042 cacheFault Cache not working properly.
-23043 noResultProc No result Proc.
-23044 noNameServer No name has been specified for the Server.
-23045 authNameErr Author name is wrong.
-23046 noAnsErr No answer error.
-23047 dnrErr Dnr error.
-23048 outOfMemory Out of memory.
xFont Manager Errors
-32615 fontNotOutlineErr Bitmap passed, routine does outlines only.
xPrimary or Secondary Init Code Errors
-32768 svTempDisable Temporarily disable card but run primary init.
-32640 svDisabled Reserve -32640 to -32768 for Apple temp disables.

OBSCURE ERROR CODES
xInternal File System Errors
1 chNoBuf No free cache buffers (all in use).
2 chInUse Requested block in use.
3 chnotfound Requested block not found.
4 chNotInUse Block being released was not in use.
16 fxRangeErr File position beyond mapped range.
17 fxOvFlErr Extents file overflow.
32 btnotfound Record not found.
33 N/A Record already exists.
34 N/A No available space.
35 btnoFit Record doesn't fit in node.
36 btbadNode Bad node detected.
37 btbadHdr Bad BTree header record detected.
48 cmnotfound CNode not found.
49 cmexists CNode already exists
50 cmnotempty Directory CNode not empty (valence = 0).
51 cmRootCN Invalid reference to root CNode.
52 cmbadnews Detected bad catalogue structure.
53 cmFThdDirErr Thread belongs to a directory not a file.
54 cmFThdGone File thread doesn't exist.
64 dsBadRotate Bad BTree rotate.
xSlot Declaration ROM Manager Errors
1 siInitSDTblErr Slot int dispatch table couldn't be initialized.
2 siInitVBLQsErr VBLqueues for all slots couldn't be initialized.
3 siInitSPTblErr Slot priority table could not be initialized.
10 sdmJTInitErr SDM Jump Table could not be initialized.
11 sdmInitErr SDM could not be initialized.
12 sdmSRTInitErr Slot Resource Table could not be initialized.
13 sdmPRAMInitErr Slot PRAM could not be initialized.
14 sdmPriInitErr Cards could not be initialized.
xHD20 Driver Errors
16 wrtHsLw HSHK low before starting.
17 wrtHSLwTO Time out waiting for HSHK to go low.
19 wrtHSHighTO Time out waiting for HSHK to go high.
32 rdHsHi HSHK high before starting.
33 rdSyncTO Time out waiting for sync ($AA) bye.
34 rdGroup to Time out waiting for group.
36 rdHoffSyncTO Time out waiting for sync after hold off.
37 rdHsHiTO Time out waiting for HSHK high.
38 rdChksumErr Checksum error on response packet.
48 invalidResp First byte in response packet was wrong.
49 sqncNumErr Sequence number in response packet was wrong.
50 dNumberErr Drive number in response packet was wrong.
64 noResp No response packet ever received.
xSCSI Manager Errors
2 scCommErr Communications error (operations time out).
3 scArbNBErr Arbitration failed during SCSIGet Bus busy.
4 scBadparmsErr Bad parameter or TIB opcode.
5 scPhaseErr SCSI bus not in correct phase for operation.
6 scCompareErr SCSI Manager busy with another operation when SCSIGet was called.
7 scMgrBusyErr SCSI Manager busy with another operation when SCSIGet was called.
8 scSequenceErt Attempted operation is out of sequence, eg. calling SCSISelect before doing SCSIGet.
9 scBusTOErr Bus timed out before data ready on SCSIRBlind and SCSIWBlind.
10 scComplPhaseErr SCSIComplete failed - bus not in Status phase.
xConnection Manager Errors
-1 cmGenericError N/A
0 cmNoErr N/A
1 cmRejected N/A
2 cmFailed N/A
3 cmTimeOut N/A
4 cmNotOpen N/A
5 cmNotClosed N/A
6 cmNoRequestPending N/A
7 cmNotSupported N/A
8 cmNoTools N/A
9 cmUserCancel N/A
11 cmUnknownError N/A
xFile Transfer Manager Errors
-1 ftGenericError N/A
0 ftNoErr N/A
1 ftRejected N/A
2 ftFailed N/A
3 ftTimeOut N/A
4 ftTooManyRetry N/A
5 ftNotEnoughDSpace N/A
6 ftRemoteCancel N/A
7 ftWrongFormat N/A
8 ftNoTools N/A
9 ftUserCancel N/A
10 ftNotSupported N/A
11 ftUnknownError N/A
xTerminal Manager Errors
-1 tmGenericError N/A
0 tmNoErr N/A
1 tmNotSent N/A
2 tmEnvironsChanged N/A
7 tmNotSupported N/A
8 tmNoTools N/A
11 tmUnknownError N/A

Positive Error Codes - Negative Error Codes

ÿÿ