static const char *RCS = "$Id: sana2errlist.c,v 4.1 1994/09/29 23:09:02 jraja Exp $";
/*
 *	sana2errlist.c - Errlist for Sana-II Errors
 *
 *	Copyright © 1994 AmiTCP/IP Group,
 *			 Network Solutions Development Inc.
 *			 All rights reserved.
 */

/****** sana2.lib/sana2wire_errlist *******************************************

    NAME
	sana2wire_errlist - SANA-II device error messages

    SYNOPSIS
	#include <devices/sana2.h>

	const char * const sana2wire_errlist[];
	const short sana2wire_nerr;

	const char * const io_errlist[];
	const short io_nerr;

	const char * const sana2io_errlist[];
	const short sana2io_nerr;

    FUNCTION
	These arrays contain error messages corresponding to the error codes
	returned by SANA-II devices.  The list sana2wire_errlist contains
	error messages for error codes in the structure IOSana2Req field
	ios2_WireError.  The sana2wire_nerr contains number of error messages
	in the array sana2wire_errlist.

	The list io_errlist contains error messages for normal IO errors
	common for all IO devices.  The io_nerr contains number of error
	messages in the array io_errlist.

	The list sana2io_errlist contains error messages for SANA-II-specific
	IO errors.  The sana2io_nerr contains number of error messages in the
	array sana2io_errlist.

    SEE ALSO
	Sana2PrintFault(), sana2perror()

*******************************************************************************
*/

const char * const sana2io_errlist[] =
{
  "No error",                           /* S2ERR_NO_ERROR */
  "Resource allocation failure",        /* S2ERR_NO_RESOURCES */
  "Unknown error code (2)",
  "Invalid argument",                   /* S2ERR_BAD_ARGUMENT */
  "Inappropriate state",                /* S2ERR_BAD_STATE */
  "Invalid address",                    /* S2ERR_BAD_ADDRESS */
  "Requested packet too large",         /* S2ERR_MTU_EXCEEDED */
  "Unknown error (7)",
  "Command is not supporter",           /* S2ERR_NOT_SUPPORTED */
  "Driver software error detected",     /* S2ERR_SOFTWARE */
  "Device driver is offline",           /* S2ERR_OUTOFSERVICE */
  "Transmission attempt failed"         /* S2ERR_TX_FAILURE */
};

const short sana2io_nerr =
{ sizeof sana2io_errlist/sizeof sana2io_errlist[0] };

const char * const io_errlist[] =
{
  "Unknown error",                      /* 0 */
  "Device or unit failed to open",      /* IOERR_OPENFAIL */
  "Request aborted",                    /* IOERR_ABORTED */
  "Command not supported by device",    /* IOERR_NOCMD */
  "Invalid length",                     /* IOERR_BADLENGTH */
  "Invalid address",                    /* IOERR_BADADDRESS */
  "Requested unit is busy",             /* IOERR_UNITBUSY */
  "Hardware self-test failed"           /* IOERR_SELFTEST */
};

const short io_nerr =
{ sizeof io_errlist/sizeof io_errlist[0] };

const char * const sana2wire_errlist[] =
{
  "Generic error: 0",                   /* S2WERR_GENERIC_ERROR */
  "Unit not configured",                /* S2WERR_NOT_CONFIGURED */
  "Unit is currently online",           /* S2WERR_UNIT_ONLINE */
  "Unit is currently offline",          /* S2WERR_UNIT_OFFLINE */
  "Protocol already tracked",           /* S2WERR_ALREADY_TRACKED */
  "Protocol not tracked",               /* S2WERR_NOT_TRACKED */
  "Buff management function error",     /* S2WERR_BUFF_ERROR */
  "Source address error",               /* S2WERR_SRC_ADDRESS */
  "Destination address error",          /* S2WERR_DST_ADDRESS */
  "Broadcast address error",            /* S2WERR_BAD_BROADCAST */
  "Multicast address error",            /* S2WERR_BAD_MULTICAST */
  "Multicast address list full",        /* S2WERR_MULTICAST_FULL */
  "Unsupported event class",            /* S2WERR_BAD_EVENT */
  "Statdata failed sanity check",       /* S2WERR_BAD_STATDATA */
  "Unknown wire error (14)",
  "Attempt to config twice",            /* S2WERR_IS_CONFIGURED */
  "Null pointer detected",              /* S2WERR_NULL_POINTER */
  "tx failed - too many retries",       /* S2WERR_TOO_MANY_RETIRES */
  "Driver fixable HW error"             /* S2WERR_RCVREL_HDW_ERR */
};

const short sana2wire_nerr =
{ sizeof sana2wire_errlist/sizeof sana2wire_errlist[0] };