BLOCKS3D (c) 1992

     Programmed by Andrew Kreibich with AMOSv1.32 (C) 1990 Mandarin/Jawx
     and AMOS 3D (C) 1991 Voodoo software and Europress software.
     Compiled with the AMOS compiler v1.0.

 
     Note: to quit at any time (without using the menu) press Ctrl-C.
           to toggle workbench use left Amiga-A (Amiga N and M will not work)  




     #####################
      Memory requirements
     #####################

     This programme needs 1 meg. 
     You may run it from Workbench in the usual manner or from 
     CLI.
     Just type

     Run > Nil: blocks3d  
     endcli
     
     (Make sure you have Run and endcli in your C directory)     
     
     If memory is short you could put it on its own boot disk and replace
     your startup sequence with the above lines.
    

     ################
       DISTRIBUTION
     ################

     THIS PROGRAMME IS SHAREWARE!

     This means that my ego and my wallet would appreciate a little feedback
     for all my efforts!
     You may (and are encouraged to) distribute the Shareware version of this
     programe to anyone providing you observe the following conditions.
    

     (a) You don't make any money from it (apart from a nominal copying fee)
         without my prior written permission.

     (b) You may not include it or any routines from it in any commercial
         release (including SHAREWARE or one of its variations) without
         my prior written permission. 

     (c) You distribute this entire doc. file and all other files with the
         programme.

     (d) Magazines may include it on a cover disk provided they send me a 
         copy of the issue of the magazine in which it is used.

     (e) If you use it you write back and let me know what you think of it
         along with a shareware donation. (minimum $15 Australian)
 
              To  Andrew Kreibich
                  Box 333
                  Wantirna South
                  Victoria
                  Australia.  3152

     Please try to send money in Australian dollars, our banks charge a
     fortune to convert:- another benefit of deregulation?).     

     If you have trouble obtaining Australian Dollars, I can cope with
     English, USA, Canadian or German money, but it costs me money to change 
     it.

     PLEASE DO NOT SEND EUROCHEQUES!! It costs me over $40 to convert these.
   
     Naturally if you think I have done a really fantastic job on this 
     and you cannot help but show your appreciation by sending more money 
     (Australian Dollars!) etc. then I will happily accept it! 

     
     WHAT DO YOU GET FOR REGISTERING?
     My thanks, the knowledge that you have encouraged me to keep programming
     and releasing stuff, the source and the solution to the puzzle if you 
     want it. (I will only send the source and/or the  solution to those who 
     specifically ask!)    




     WHAT IS BLOCKS3D?
    
     This was the first thing I programmed in AMOS3D. You have 4 blocks
     each with 4 colours on the faces. Your task is to rotate the blocks
     into position so that they line up with one of each of the colours 
     facing you at all times no matter which of the four sides is facing
     you. For further instructions press HELP!


  
   

    ALSO VERY IMPORTANT!!!

    To run this programme you must have c3d.lib and the Blocks drawer 
    in the drawer you are running from. These are supplied with the programme
    and everything should work providing you haven't moved or deleted these
    files. Do not drag the Blocks3D icon to another drawer on your workbench
    or you will leave these files behind. If you want to put the programme
    somewhere else then move the entire Blocks3D drawer.