/* * $Id: excl.trm,v 1.4 1995/12/20 21:47:46 drd Exp $ * */ /* Copyright (c) 1992 by P. Klosowski at NIST. All Rights Reserved * * Permission to use, copy, and distribute this software and its * documentation for any purpose with or without fee is hereby granted, * provided that the above copyright notice appear in all copies and * that both that copyright notice and this permission notice appear * in supporting documentation. * * Permission to modify the software is granted, but not the right to * distribute the modified code. Modifications are to be distributed * as patches to released version. * * This software is provided "as is" without express or implied warranty. * * This file is included by ../term.c. * * * send your comments or suggestions to (info-gnuplot@dartmouth.edu). * *** $Id: excl.trm,v 1.4 1995/12/20 21:47:46 drd Exp $ NAME quic PURPOSE QUIC driver for GNUPLOT NOTES HISTORY przemek - Aug 16, 1992: Created. ***/ /* c ***************************************** c ***************************************** c ****** ***** c ****** EXCL command definitions ***** c ****** ***** c ***************************************** c ***************************************** */ /* * adapted to the new terminal layout by Stefan Bodewig (Dec. 1995) */ #ifndef GOT_DRIVER_H #include "driver.h" #endif #ifdef TERM_REGISTER register_term(excl) #endif #ifdef TERM_PROTO TERM_PUBLIC void EXCL_init __P((void)); TERM_PUBLIC void EXCL_graphics __P((void)); TERM_PUBLIC void EXCL_text __P((void)); TERM_PUBLIC void EXCL_linetype __P((int linetype)); TERM_PUBLIC void EXCL_move __P((unsigned int x, unsigned int y)); TERM_PUBLIC void EXCL_vector __P((unsigned int x2, unsigned int y2)); TERM_PUBLIC void EXCL_put_text __P((unsigned int x, unsigned int y, char str[])); TERM_PUBLIC void EXCL_reset __P((void)); #define EXCL_XMAX 9000 #define EXCL_YMAX 6500 #define EXCL_XLAST (EXCL_XMAX - 1) #define EXCL_YLAST (EXCL_YMAX - 1) #define EXCL_VCHAR 120 #define EXCL_HCHAR 70 #define EXCL_VTIC 70 #define EXCL_HTIC 70 #endif /* TERM_PROTO */ #ifndef TERM_PROTO_ONLY #ifdef TERM_BODY /* Define ansi command headers, NUL character */ #define ESC "\033" #define GS "\035" #define CSI "\033[" #define DCS "\033P" #define ST "\033\\" /* page numbers are given per "Talaris EXCL programmer's reference manual" M292 rev.2 NOTE: EXCL coordinate system places (0,0) at upper left corner of the page c EXCL commands for initialization c TALAMS: set ANSI (p. 162) c TALMOD: set emulation *** EXCL (p. 164) c TALPGO: set page orient *** landscape (p. 81) c TALFCTL: set paper format *** 8.5x11 (p. 85) c TALTBM: set top/bot margins ** in land mode to full pg (p. 73) c TALLRM: set left/right margins (p. 75) c PUM: set units ** units of measure set by TALPRM (p. 67) c TALASF: Absorb cr/ff/lf/vt ** ON (p. 182) c TALPOP: pop controller params (p. 168) c TALPSH: push controller params (p. 167) c TALPRM: set units of measure ** to 1/1000 inch (p. 64) c TALGLT: set line type ** solid (p. 211) c TALORG: set page absolute origin ** (0,0) UL corner (p. 78) c TALPCW: set page clip window *** for landsc/full page (p. 84) c TALGLP: line: **pen7x7mil*draw*smear*glyph112*font5279* (p. 208) c TALGLPE: ending for TALGLP command, forcing DRAW mode c TALGBB: bounding box; used only by qdrive (p. 207) c TALFPO: Force page out ** clear bitmap (p. 95) c TALGDW: graphical draw to hor,vert ** abs coords (p. 212) c TALGMV: graphical move to hor,vert ** abs coords (p. 213) */ #define TALAMS "\033[0*s" #define TALMOD "\033[1;0r" #define TALPGO "\033[1;0p" #define TALFCTL "\033[0;3x" #define TALTBM "\033[0;8500 v" #define TALLRM "\033[0;11000v" #define PUM "\033[11h" #define TALASF "\033[1 z" #define TALPOP "\033[*]" #define TALPSH "\033[*[" #define TALPRM "\033[3y" #define TALGLT "\033[%s*t" #define TALORG "\033[0;0o" #define TALCCNT "\033[1;0u" #define TALPCW "\033[0;8500;11000;0*c" #define TALGLP_init "\033[7;7;8;1;112;5279*w" #define TALGLP "\033[%d;%d;8*w" #define TALFPO "\033[0*F" #define TALGDW "\033[0;%d;%d*d" #define TALGMV "\033[0;%d;%d*m" /* TALPYL: polyline (p. 222) ** 5;0} list of 16-bit signed integers, encoded, mostly relative ** 5,1} list of ASCII absolute coords (if w/o +- signs)(e.g. 315:1222;) */ #define TALPYL "\033P5;1}" TERM_PUBLIC void EXCL_init() { fprintf(outfile,"%s%s%s%s%s%s", TALPSH,TALAMS,TALMOD,TALCCNT,TALFCTL,TALASF); /* ^save state ^setEXCL ^PaperSize8.5x11 */ /* ^setANSI ^copyCount1 ^absorbCtlChar */ fprintf(outfile, "%s%s%s%s%s%s", PUM,TALPRM,TALPGO,TALPCW,TALORG,TALGLP_init); fprintf(outfile, TALGLT,""); /* ^setUnits ^landscape ^OriginZero ^SolidLine */ /* ^Units1/1000" ^pageClip ^SetLine */ } TERM_PUBLIC void EXCL_graphics() { } TERM_PUBLIC void EXCL_text() { fprintf(outfile,TALFPO ); /* ^pageout */ } TERM_PUBLIC void EXCL_linetype(linetype) int linetype; { /* excl line widths in mils: 4 is mimimum, but too thin; then 7,10,14,17,20,24,27... exclpen=MOD(NPEN,8)*7 CSI exclpen; exclpen; TALGLPE */ static char *type[2+9]={ "", "40;40", "", "42;42", "14;21", /* .... ---- -- -- -- . . . */ "", "49;30", "14;21", "", "49;30", "14;21" /* same pattern, but thicker.. and thicker */ }; static int width[2+9] = {14, 7, 7, 7, 7, 10, 10, 10, 17, 17, 17}; if (linetype >= 9) linetype %= 9; fprintf(outfile,TALGLP,width[linetype+2],width[linetype+2]); /* ^width in dots */ fprintf(outfile,TALGLT,type[linetype+2]); /* ^line type */ } TERM_PUBLIC void EXCL_move(x,y) unsigned int x,y; { fprintf(outfile,TALGMV, 1000 + x, EXCL_YLAST + 1000 - y); /* ^pen up vector*/ } TERM_PUBLIC void EXCL_vector(x2,y2) unsigned int x2,y2; { fprintf(outfile,TALGDW, 1000 + x2, EXCL_YLAST + 1000 - y2); /* ^pen down vector*/ } TERM_PUBLIC void EXCL_put_text(x,y,str) unsigned int x,y; char str[]; { char ch; EXCL_move(x,y - EXCL_VCHAR/3); ch = *str++; while(ch!='\0') { putc(ch,outfile); ch = *str++; } } TERM_PUBLIC void EXCL_reset() { fprintf(outfile,"%s%s", TALFPO, TALPOP); /* ^pageout ^pop */ } #endif /* TERM_BODY */ #ifdef TERM_TABLE TERM_TABLE_START(excl_driver) "excl", "Talaris EXCL Laser printer (also Talaris 1590 and others)", EXCL_XMAX,EXCL_YMAX, EXCL_VCHAR, EXCL_HCHAR, EXCL_VTIC, EXCL_HTIC, options_null, EXCL_init,EXCL_reset, EXCL_text, null_scale, EXCL_graphics, EXCL_move, EXCL_vector, EXCL_linetype,EXCL_put_text, null_text_angle, null_justify_text, line_and_point, do_arrow, set_font_null TERM_TABLE_END(excl_driver) #undef LAST_TERM #define LAST_TERM excl_driver #endif /* TERM_TABLE */ #endif /* TERM_PROTO_ONLY */ /* * NAME: excl * * OPTIONS: none * * SUPPORTS: Talaris EXCL Laser printer (also Talaris 1590 and others) * * Further Info: Who is Talaris? * */