%-----------------------------------------------------------------------------
% Beginning of CONM-M.let-e
%-----------------------------------------------------------------------------

Following this letter are three files (CONM-M.STY, CONM-M.TEX, CONM-MREFS.TEX 
and CONM-M.CHECKLIST) to be used when preparing a monograph in AMS-TeX 2.1, for
a volume in the Contemporary Mathematics series.  To make it easier to load
these files separately on your system, they are separated by file delimiters.

The .STY file is used to modify the AMS-TeX preprint style to the CONM-M style.
Instructions for using this file are listed at the top.

The CONM-M.TEX file is a sample of the macros defined in the .STY file.  Before
preparing your paper you should TeX this file and print it to test the macros
and to get instructions for their use. The CONM-MREFS.TEX file is a 
supplemental file that illustrates how references should be typed; it too
should be TeXed and printed.

The .CHECKLIST file should be printed and used to help you avoid the most
common problems.

Once your paper has been accepted for publication in CONM-M, please send all
the necessary .TEX files to our Internet address: PUB-SUBMIT@MATH.AMS.COM.  
When you send the file please be sure to include a message that identifies both
the publication series and the editor of the volume.

Should you have any technical questions, please contact our Technical Support
Group at 800-321-4AMS or 401-455-4080.  They can also be reached through
electronic mail at Internet: tech-support@math.ams.com.

%-----------------------------------------------------------------------------
% End of CONM-M.let-e
%-----------------------------------------------------------------------------
%-----------------------------------------------------------------------------
% Beginning of conm-m.sty
%-----------------------------------------------------------------------------
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% This file is designed to work with AMS-TeX version 2.1.
%
% The TeX code defined here will modify the AMS-TeX 2.1 preprint style to
% the CONM-M style.  It sets up the correct page size,
% puts a logo and a copyrightline on the first page, and formats the
% top matter, headings and references appropriately.
%
%
% Instructions:
%
%  1. Create a file named  conm-m.sty containing the data in the lines
%     from  %%% conm-m.sty %%%  through  \endinput .  Install the file
%     in the same directory as amsppt.sty .
%
%  2. In a data file, include the line,  \documentstyle{conm-m}
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%  First input the preprint style

\def\next{AMSPPT}\ifx\styname\next
  \else\input amsppt.sty\fi


\catcode`\@=11

%  Set the page size and first-page sink appropriately

\pageheight{47pc}
\pagewidth{29pc}
\parindent=12\p@

%  Page numbers and running heads are provided by default, as defined
%  in AMSPPT.STY.  Headline text is centered, and page numbers are
%  positioned at the outside corners.  To suppress page numbers and/or
%  running heads, include \NoPageNumbers and/or \NoRunningHeads in the
%  input file, as appropriate.

%  In CONM-M, we do want running heads.  We must provide suitable
%  fonts definitions.  CONM-M specs call for 7-point headlines,
%  but \sevenpoint is not defined in AMSPPT.STY; substitute \eightpoint,
%  which is defined.

\def\foliofont@{\eightrm}
\def\headlinefont@{\eightpoint}

%  text font is 10-on-13; AMSPPT.STY is 10-on-12

\addto\tenpoint{\normalbaselineskip13\p@
 \abovedisplayskip6\p@ plus6\p@ minus0\p@
 \belowdisplayskip6\p@ plus6\p@ minus0\p@
 \abovedisplayshortskip0\p@ plus3\p@ minus0\p@
 \belowdisplayshortskip2\p@ plus3\p@ minus0\p@
 \ifsyntax@
 \else
  \setbox\strutbox\hbox{\vrule height9\p@ depth4\p@ width\z@}%
  \setbox\strutbox@\hbox{\vrule height8\p@ depth3\p@ width\z@}%
 \fi
 \normalbaselines\rm}

%  modify \title to use a larger font

\font@\titlebf=cmbx10 scaled \magstep2
\font@\titlei=cmmi10 scaled \magstep2
\font@\titlesy=cmsy10 scaled \magstep2
\def\titlefont{\normalbaselineskip18\p@
 \textonlyfont@\bf\titlebf
 \ifsyntax@\else
  \textfont\z@\titlebf  \scriptfont\z@\tenrm  \scriptscriptfont\z@\sevenrm
  \textfont\@ne\titlei  \scriptfont\@ne\teni  \scriptscriptfont\@ne\seveni
  \textfont\tw@\titlesy \scriptfont\tw@\tensy \scriptscriptfont\tw@\sevensy
  \textfont\thr@@\tenex \scriptfont\thr@@\tenex \scriptscriptfont\thr@@\tenex
 \fi
 \normalbaselines\titlebf}

\def\title#1\endtitle{\global\setbox\titlebox@
   \vtop{\titlefont\bf
   \raggedcenter@
   \baselineskip18pt
   #1\endgraf}%
 \ifmonograph@ \edef\next{\the\leftheadtoks}%
    \ifx\next\empty
    \leftheadtext{#1}\fi
 \fi
 \edef\next{\the\rightheadtoks}\ifx\next\empty \rightheadtext{#1}\fi
 }

% chapter heading in ten point

\def\romanchapternum{\gdef\chapterno@{\uppercase\expandafter{\romannumeral
    \chaptercount@}}}

\def\chapterno@{\the\chaptercount@}

\def\chapter{\let\savedef@\chapter
  \def\chapter##1{\let\chapter\savedef@
  \leavevmode\hskip-\leftskip
   \rlap{\vbox to\z@{\vss\centerline{\tenpoint
   \frills@{CHAPTER\space\afterassignment\chapterno@\global\chaptercount@=}%
   ##1\unskip}\baselineskip34pt\null}}\hskip\leftskip}%
 \nofrillscheck\chapter}

%  authors are set in all caps

\def\author{\let\savedef@\author
  \def\author##1\endauthor{\global\setbox\authorbox@
 \vbox{\tenpoint\raggedcenter@
  \frills@\uppercasetext@{\ignorespaces##1}\endgraf}
 \edef\next{\the\leftheadtoks}%
 \ifx\next\empty\expandafter\uppercase{\leftheadtext{##1}}\fi}
\nofrillscheck\author}

%  \abstract differs from the one in AMSPPT.STY by the use of a slightly 
%  larger indentation.

\def\abstract{\let\savedef@\abstract
 \def\abstract{\let\abstract\savedef@
  \setbox\abstractbox@\vbox\bgroup\noindent$$\vbox\bgroup\indenti=3pc
  \def\envir@end{\endabstract}\advance\hsize-2\indenti
  \def\usualspace{\enspace}\eightpoint \noindent
  \frills@{{\smc Abstract.\enspace}}}%
 \nofrillscheck\abstract}

% change default first page sink

\outer\def\endtopmatter{\add@missing\endabstract
 \edef\next{\the\leftheadtoks}\ifx\next\empty
  \expandafter\leftheadtext\expandafter{\the\rightheadtoks}\fi
 \ifmonograph@\else
   \ifx\thesubjclass@\empty\else \makefootnote@{}{\thesubjclass@}\fi
   \ifx\thekeywords@\empty\else \makefootnote@{}{\thekeywords@}\fi
   \ifx\thethanks@\empty\else \makefootnote@{}{\thethanks@}\fi
 \fi
  \pretitle
  \begingroup % to localize variant topskip
  \ifmonograph@\topskip9pc \else \topskip4pc \fi
  \box\titlebox@
  \endgroup
  \preauthor
  \ifvoid\authorbox@\else \vskip2.5pcplus1pc\unvbox\authorbox@\fi
  \preaffil
  \ifvoid\affilbox@\else \vskip1pcplus.5pc\unvbox\affilbox@\fi
  \predate
  \ifx\thedate@\empty\else \vskip1pcplus.5pc\line{\hfil\thedate@\hfil}\fi
  \preabstract
  \ifvoid\abstractbox@\else \vskip1.5pcplus.5pc\unvbox\abstractbox@ \fi
  \ifvoid\tocbox@\else\vskip1.5pcplus.5pc\unvbox\tocbox@\fi
  \prepaper
  \vskip2pcplus1pc\relax
}

%  Heading styles are different from AMSPPT.STY:
%  \heading is bold, otherwise the same.
%  \subheading and \subsubheading are indented, otherwise the same.

\def\headfont@{\bf}
\def\refheadfont@{\smc}
\let\varindent@\indent

%  Indentation for \proclaim, \demo, etc., are the same as for \subhead,
%  and are taken care of by \varindent.
%  \proclaim head font is small caps, and the text font is italic (not \sl).
%  \demo is preceded by a \smallskip and followed by none (not \medskip).

\def\proclaimheadfont@{\smc}

\let\proclaim\relax
\outer\def\proclaim{%
  \let\savedef@\proclaim \let\proclaim\relax
  \add@missing\endroster \add@missing\enddefinition \add@missing\endproclaim
  \envir@stack\endproclaim
 \def\proclaim##1{\restoredef@\proclaim
   \penaltyandskip@{-100}\medskipamount\varindent@
   \def\usualspace{{\proclaimheadfont@\enspace}}\proclaimheadfont@
   \ignorespaces##1\unskip\frills@{.\enspace}%
  \it\ignorespaces}%      After printing the name of the theorem, switch to \sl.
 \nofrillscheck\proclaim}

\def\remark{\let\savedef@\remark \let\remark\relax
  \add@missing\endroster \add@missing\endproclaim
  \envir@stack\endremark
  \def\remark##1{\restoredef@\remark
    \penaltyandskip@\z@\smallskipamount
  {\def\usualspace{{\remarkheadfont@\enspace}}%
  \varindent@\remarkheadfont@\ignorespaces##1\unskip\frills@{.\enspace}}\rm
  \ignorespaces}\nofrillscheck\remark}

\def\remarkheadfont@{\smc}
\def\enddemo{\par\revert@envir\enddemo \endremark\vskip\z@ plus 1\p@ minus 0\p@}

%  \Refs differs only in the skip below, which is 8pt (default=6pt)
%  Before reiterating definition only for that, check to see if it matters.

\def\citefont@{\bf}
\def\refsfont@{\tenpoint}

\let\Refs\relax
\outer\def\Refs{\add@missing\endroster \add@missing\endproclaim
 \let\savedef@\Refs \let\Refs\relax % because of \outer-ness
 \def\Refs##1{\restoredef@\Refs
   \if\notempty{##1}\penaltyandskip@{-200}\aboveheadskip
     \begingroup \raggedcenter@\refheadfont@
       \ignorespaces##1\endgraf\endgroup
     \penaltyandskip@\@M\belowheadskip
   \fi
   \begingroup\def\envir@end{\endRefs}\refsfont@\sfcode`\.\@m
   }%
 \nofrillscheck{\csname Refs\expandafter\endcsname\frills@{{References}}}}

\def\logo@{}
%\baselineskip2pc \hbox to\hsize{\hfil\eightpoint Typeset by \AmSTeX}}

\catcode`\@=13


\Monograph

\def\amsversion{2.1}
\endinput                                 

%-----------------------------------------------------------------------------
% End of conm-m.sty
%-----------------------------------------------------------------------------
%-----------------------------------------------------------------------------
% Beginning of conm-m.tex
%-----------------------------------------------------------------------------
%
% AMS-TeX 2.1 sample file for CONM-M volumes.
%
\input amstex
\documentstyle{conm-m}
\NoBlackBoxes
%

\topmatter
\title\chapter{1} Sample Paper for CONM-M,\\
On Maximal Ideals in Subalgebras of $C(X)$\endtitle
\endtopmatter
\leftheadtext{1. Sample Paper for CONM-M}

\document

\head 1. Introduction                % bold, centered;
\endhead                             % don't type final punctuation
This sample paper illustrates the use of the
\AmSTeX{} Version~2.1 preprint style with additional macros for the series {\it
Contemporary Mathematics}.  In this sample paper, brief
instructions to authors will be interspersed with mathematical text extracted
from (purposely unidentified) published papers.  For instructions on preparing
mathematical text, the author is referred to {\it The Joy of \TeX}, second
edition, by Michael Spivak \cite{12}.

\subhead 1.1. Top matter\endsubhead
The input format and content of the top matter for a monograph consists only
of the chapter title as illustrated in this sample file {\bf CONM-M.tex}.
If it is desired to have chapter numbers be uppercase Roman numerals rather
than Arabic numbers, you must type {\tt\char`\\romanchapternum} before the
{\tt\char`\\title} line.

The chapter title and the current, main-level heading title appear in the
appropriate running heads automatically. If the full title or heading would
require more than one line to fit in the running head, an abbreviated form,
including the correct chapter or section number, should be substituted using 
{\tt\char`\\leftheadtext} or {\tt\char`\\rightheadtext} respectively. The
\hbox{\tt\char`\\leftheadtext}  should be typed after the
{\tt\char`\\endtopmatter} command and any \hbox{\tt\char`\\rightheadtext}
should be typed after the appropriate {\tt\char`\\head} command.

\subhead 1.2. Fonts\endsubhead
The fonts used in this paper are from the Computer Modern family; they
should be available to all authors preparing papers with these macros.
However, the final copy may be set by the AMS using other fonts.  

\subhead 1.3. A mathematical extract\endsubhead
The mathematical content of this sample paper has been extracted from
published papers, with no effort made to retain any mathematical sense.
It is intended only to illustrate the recommended manner of input.

Mathematical symbols in text should always be input in math mode as
illustrated in the following paragraph.

A function is invertible in $C(X)$ if it is never zero, and in $C^*(X)$ if
it is bounded away from zero. In an arbitrary $A(X)$, of course, there
is no such description of invertibility which is independent of the 
structure of the algebra. Thus in \S 2 we associate to each noninvertible
$f\in A(X)$ a $z$-filter $\Cal Z (f)$ that is a measure of where
$f$ is ``locally'' invertible in $A(X)$. This correspondence extends to
one between maximal ideals of $A(X)$ and $z$-ultrafilters on $X$.
In \S 3 we use the filters $\Cal Z (f)$ to describe the intersection of 
the free maximal ideals in any algebra $A(X)$. Finally, our main result
allows us to introduce the notion of $A(X)$-compactness of which 
compactness and realcompactness are special cases. In \S 4 we show how
the Banach-Stone theorem extends to $A(X)$-compact spaces.

\head 2. Theorems, lemmas, and other proclamations\endhead

Theorems and lemmas are varieties of proclamations.  Either may have a
proof, or a ``demonstration.''  The lemma and proof below illustrate
the use of a ``roster'' or itemized list; the first item in the proof
roster is run in.  Note that both proclamations and demonstrations
have their beginnings and ends marked in the file.

\proclaim{Lemma 2.1} Let $f, g\in  A(X)$ and let $E$, $F$ be cozero
sets in $X$.
\roster
\item"(a)" If $f$ is $E$-regular and $F\subseteq E$, then $f$ is $F$-regular.

\item"(b)" If $f$ is $E$-regular and $F$-regular, then $f$ is $E\cup F$-%
regular.

\item"(c)" If $f(x)\ge c>0$ for all $x\in E$, then $f$ is $E$-regular.

\endroster
\endproclaim

\demo{Proof}
\roster
\item"(a)" Obvious.

\item"(b)" Let $h, k\in A(X)$ satisfy $hf|_E=1$ and $kf|_F=1$. Let
$w=h+k-fhk$. Then $fw|_{E\cup F}=1$.

\item"(c)" Let $h=\max\{c,f\}$. Then $h|_E=f|_E$ and $h\ge c$. So $0<h^{-1}
\le c^{-1}$. Hence $h^{-1} \in C^*(X)\subseteq A(X)$, and 
$h^{-1} f|_E=1$. 
\endroster
\enddemo

\definition{Definition 2.1}
For $f\in A(X)$, we define
$$
\Cal Z (f)=\{E\in Z[X]\: \text{$f$ is $E^c$-regular}\}.
\tag 2.1
$$
\enddefinition

\head 3. Roman type\endhead

Numbers, punctuation, (parentheses), [brackets], $\{$braces$\}$, and
symbols used as tags should always be set in roman type.  The following
sample theorem illustrates how to code for roman type within the
statement of a theorem.

\proclaim{Theorem 3.1}
Let $\Cal G$ be a free nilpotent-of-class-\rom{2} group of rank
$\ge 2$ with carrier $G$ and let
$$m : G\times G \to Z$$
satisfy \rom{(2.21)}, \rom{(2.22)}, and \rom{(2.24)}, and define
$\kappa$ by \rom{(2.23)}.  Then this kappa-group is kappa-nilpotent
of class \rom{2} and kappa-metabelian, that is to say, it satisfies
\rom{S2} and \rom{S3}, but it is kappa-abelian if, and only if,
$$m(x,y) = -1\quad\text{for all $x, y \notin G'$}.
\tag 3.1$$
\rom{(}Thus \rom{(3.1)} implies the trivial consequence
\rom{(2.1)}.\rom{)}  Assume now that \rom{(3.1)} does not hold,
so that the kappa-group is kappa-nonabelian.  Assume further that $m$
is not constant outside $G'$ \rom{(}inside $G'$ the values of $m$
clearly do not matter\rom{)}.  Then $\kappa$ is neither left nor right
linear, that is to say, neither \rom{S4} nor \rom{S5} holds:
\rom{I1} again holds, but none of \rom{I2--I5}.  As before,
\rom{I6} is equivalent to \rom{(2.25)}.  Now \rom{I7$'$}, however,
is equivalent to a condition similar to \rom{(2.25)}, namely
$$m(xz\sigma, yz\sigma) = m(x,y)\,.
\tag 3.2$$
%As before, each of \rom{I8--I11} is equivalent to \rom{(2.26)}.
%As before, \rom{J3} does not hold; but now \rom{J1}, \rom{J2}
%and \rom{J4} hold.
\endproclaim

Letters used as abbreviations rather than as variables or constants
are set in roman type.  Use the control sequences \cite{12}
for common mathematical functions and operators like $\log$ and $\lim$,
and use {\tt\char`\\cite} when citing a reference.  The reference tag
will be {\bf bold} automatically, but you will need to set any
additional information in roman type as illustrated by the coding of
the previous sentence.

\head 4. References\endhead

The bibliography must be a separate chapter with the title entered as:
\hbox{\tt\char`\\title} {\tt References\char`\\endtitle} or {\tt\char`\\title 
Bibliography\char`\\endtitle}. Input each reference
using the \AmSTeX{} control sequences given in Appendix C of \cite{12}.
Arrange the references in alphabetical order by the last name of the first
named author.  

References are set with hanging indentation. The amount of indentation
is preset to accommodate the most common case, two-digit numbers.
It can be increased (or decreased) by specifying the widest number or
key used in the references. For example,
{\tt\char`\\widestnumber\char`\\no\{999\}} and
{\tt\char`\\widestnumber\char`\\key\{GHMaR\}}
will increase the indentation to accommodate a three-digit number or the key
\hbox{[GHMaR]} respectively.  Note that the parts of the formatting that
depend on the current journal style are taken into account automatically
(the period after a number or the [\dots]\ around a key, plus the usual
space).

General instructions for tagging references are given in Appendix C of
\cite{12}.  Some changes have been made in the upgrade to \AmSTeX{}
Version~2.1.  Except for the simplification of the {\tt\char`\\key},
the new conventions are illustrated in the bibliography at the end of
this sample.

\head 5. Figures\endhead

Figures should be handled as inserts.  The amount of space left should equal
the exact height of the figure.  Extra space around the figure will be
provided automatically.  The positioning of figures may need to be changed
to obtain the best possible page layout.  Thus, it is important to label
your figures and use the labels in the text when referring to figures.
The figure caption should be positioned below the figure.

In most cases, figures will be rendered for consistency of style within a
book.  Please provide figure manuscript drawn in black ink with clean,
unbroken lines on nonabsorbent paper.

\example{Example 5.1}
For the link in Figure 1, the Massey product $\langle u_1, u_2, u_3,
u_4, u_5\rangle$ in $S^3-L$ is defined and consists of all
integer multiples of $\gamma_{1,5}$.  For the link in Figure 2,
the Massey product $\langle u_1, u_2, u_3, u_4, u_5\rangle$ in
$S^3-L$ contains the single element $\gamma_{1,5}$.  Since the links
in Figures 1 and 2 are homotopic, the example indicates that Massey
products in $S^3-L$ with distinct $u_j$'s do not, in general,
determine homotopy invariants of the link.  For the link in Figure 1
and the link in Figure 2, the Massey product $\langle u_1, u_2, \dots,
u_5\rangle$ in $\{S^3-L_i\}_{i=1}^5$ contains the single element
$\gamma_{1,5}$.
\endexample

%  art work measures 9pc for figure 1, 5.75pc for figure 2

\topinsert
\vskip 9pc
\botcaption{Figure 1. {\rm Only the word} {\it figure\/} 
{\rm is set cap/small cap. Any other words are regular text.}}\endcaption
\endinsert
\topinsert
\vskip 5.75pc
\botcaption{Figure 2}\endcaption
\endinsert

\head 6. Other headings\endhead

\subhead 6.1. A subheading\endsubhead % bold, run-in; do not type ending punctuation
We conclude by noting that another characterization of $A$-compactness
follows from Mandelker. We call a family $\Cal S$ of closed sets in
$X\ A$-stable if every $f\in A(X)$ is bounded on some member of $\Cal S$.
Then one can show that a space is $A$-compact if and only if 
every $A$-stable family of closed sets with the finite intersection property
has nonempty intersection.

\subsubhead {\rm 6.1.1.} A second-level subheading\endsubsubhead
This paragraph is included only to illustrate the appearance of a
sub-subheading.

\enddocument

%-----------------------------------------------------------------------------
% End of conm-m.tex
%-----------------------------------------------------------------------------
%-----------------------------------------------------------------------------
% Beginning of conm-m.checklist
%-----------------------------------------------------------------------------

		     Check List for Electronic Manuscripts

				  CONM-M Volumes


- The author should proofread the paper before submitting to the AMS.

- The title on the first page should have the first letter of major words
  and any proper names, in uppercase; other words should be lowercase.

- The running heads for the left-hand (even-numbered pages) should have the
  chapter title all in uppercase.  Shorten the title in the running heads only 
  if it is necessary to make it fit on one line.

- The running heads for the right-hand (odd-numbered pages) should have
  the main heading title (shortened if necessary) all in uppercase.

- Citations in the manuscript should be coded using "\cite".

- References should be coded using the AMS-TeX codes and should include all 
  available information.

- The .tex files should include NO "input" files other than amstex.

- All definitions should be  at the top of the file and none of them should
  redefine any TeX or AMS-TeX commands.

- Definitions should be used consistently throughout the paper.

- No definitions should be used for formatting text; only the AMS-TeX 
  formatting commands should be used.

- The file should contain no line and/or page breaks.

- A covering letter should be included with the electronic submission.  The 
  letter should clearly identify the author, title and intended publication
  series.  It should also tell us where the author can be reached throughout
  the publication process.  

%-----------------------------------------------------------------------------
% End of conm-m.checklist
%-----------------------------------------------------------------------------
%-----------------------------------------------------------------------------
% Beginning of conm-mrefs.tex
%-----------------------------------------------------------------------------
%
% AMS-TeX 2.1 sample Reference file for CONM-M volumes.
%
\input amstex
\documentstyle{conm-m}
\NoBlackBoxes
%

\topmatter
\title References\endtitle
\endtopmatter

\document

\widestnumber\no{10}
\ref\no 1
\by     V. L. Arnol$'$d, A. N. Varchenko, and S. M. Gusein-Zade
\book   Singularities of differentiable maps.~{\rm I}
\publ   ``Nauka'' \publaddr Moscow \yr 1982 \lang Russian
\transl English transl. \publ Birkh\"auser \yr 1985
\endref
\ref\no 2 \bysame
\book   Singularities of differentiable maps.~{\rm II}
\publ   ``Nauka'' \publaddr Moscow \yr 1984
\transl English transl. \publ Birkh\"auser \yr 1988
\endref
\ref\no 3
\by     H. Bass, E. H. Connell, and D. Wright
\paper  The Jacobian conjecture
\jour   Bull. Amer. Math. Soc.
\vol    7 \yr 1982 \pages 287--330
\endref
\ref\no 4
\by     H. Bass and G. H. Meisters
\paper  Polynomial flows in the plane
\jour   Adv. in Math. \vol 55 \yr 1985 \pages 173--203
\endref
\ref\no 5
\by     B. Coomes
\book   Polynomial flows, symmetry groups, and conditions sufficient for 
        injectivity of maps
\bookinfo Ph.D. thesis, Univ. Nebraska-Lincoln
\yr     1988
\endref
\ref\no 6 \bysame % B. Coomes
\paper  The Lorenz system does not have a polynomial flow
\jour   J. Differential Equations
\toappear
\endref
\ref\no 7
\by     E. Formanek
\paper  Generating the ring of matrix invariants
\inbook Lecture Notes in Math., vol. 1197
\publ   Springer-Verlag \publaddr Berlin and New York
\yr     1986 \pages 73--82
\endref
\ref\no 8 \bysame  % Meisters
\paper  Polynomial flows on $\bold R^n$
\inbook Proc. Semester on Dynamical Systems (Warsaw, Autumn 1986)
\publ   Springer-Verlag
\publaddr Berlin, Heidelberg, and New York
\toappear
\endref
\ref\no 9
\by     S. Osher
\paper  Shock capturing algorithms for equations of mixed type
\inbook  Numerical Methods for Partial Differential Equations
\eds    S. I. Hariharan and T. H. Moulton
\publ   Longman
\publaddr New York
\yr     1986
\pages  305--322
\endref
\ref\no 10
\by     L. A. Ostrovsky
\paper  Nonlinear internal waves in a rotating ocean
\paperinfo Part 2
\jour   Oceanology 
\vol    18
\yr     1978
\pages  181--191
\endref
\ref \no 11
\by     G. S. Petrov 
\paper  Elliptic integrals and their nonoscillatory behavior
\jour   Funktsional. Anal. i Pri\-lo\-zhen.
\vol    20
\yr     1986
\pages  46--49
\transl\nofrills English transl. in
\jour   Functional Anal. Appl. \vol 20 \yr 1986
\endref
\ref\no 12
\by     M. D. Spivak \book The Joy of \TeX{}\bookinfo second edition
\publ   Amer. Math. Soc., Providence, R.~I. \yr 1990\endref


\enddocument

%-----------------------------------------------------------------------------
% End of conm-mrefs.tex
%-----------------------------------------------------------------------------