- Oliver Kastl of Elaborate Bytes has now released a4000_atapi.device version 8.2. This device allows you to use an ATAPI CD-ROM drive with the A4000 or A4000T embedded IDE controller. A4000 users can use the very popular and cheap CD-Roms for PCs without any major disadvantages against SCSI CD-Rom drives. The major advantage for A4000 users without a SCSI controller is, that they don't have to buy one. The major advantage for A4000 users with a SCSI controller is, that they have an unused IDE port in their machine anyway and SCSI CD-Roms are usually more expensive. The device maps SCSI-II commands to ATAPI packets using the standard Commodore HD_SCSICMD interface, so any "CD-Rom specific" programs (Multisession Filsystems, Audio Players and Photo-CD readers) designed for SCSI-II CD-Roms should work. This has been tested with CacheCDFS, PlayCD, CD32-Emulator and PhotoWorX. The device is fully interrupt driven and will use only a small amount of CPU time for the transfer. A demo version is uploaded to AmiNet. The new version 8.2 features: - Intermediate fixes - mainly to the Chinon OEM version - Revised to fully comply with ATAPI 1.2 specs. All ATAPI devices which comply with Atapi 1.2 should work, including non CD-Roms (e.g. Tape devices). Removed Elitegroup Vertos from compatibility list - this one doesn't comply with ATAPI specs 1.2. - Merged a4000_atapi and a1200_atapi to a single atapi.device Checking, which devices are connected to the IDE port changed again -this should fix the reported problems of "FindCD" hangs. - Mitsumi FX-300 and old FX-400 apparently hangs. This is a bug in the Mitsumi firmware. Added a workaround for this. CD-Rom can be reset on Open, if the device is opened with device flags 1. - Emulates SCSI 6 byte Mode Sense / Mode Select. This is important for some SCSI Audio players and Shapeshifter to work properly. Elaborate Bytes (Oliver Kastl) Am Westpark 5 81373 Munich Germany EMail: 100447.3361@compuserve.com Hirsch & Wolf OHG Mittelstr. 33 56564 Neuwied Germany