\r\nPlease enter your correct mailing address on the following lines...
Street address : 
City/Town      : 
State/Province : 
Postal code    : 
LockOut.TXT
LockOutH.TXT
\r\nA new account has already been created.\r\n
<New user applying>
<New user>
NewUser
First and last name: 
\nThat name is unacceptable.  Access denied!\n
That name is already in use by %s%d.\r\n
Handle/Alias   : 
GUEST
\r\nYou have opted to create a real account.  You may no longer
be a guest.\r\n
Guest
\r\nSorry, guest accounts are not accepted here.\r\n
Phone Number   : 
Password       : 
\r\nPlease choose a password which is different from your username.\r\n
\r\nYour new account:
\r\n(1) Change name (%s)\r\n
(2) Change phone number (%s)\r\n
(3) Change password (%s)\r\n
(4) Change terminal width (%d)\r\n
(5) Change street address (%s)\r\n
(6) Change city (%s)\r\n
(7) Change state (%s)\r\n
(8) Change postal code (%s)\r\n
(9) Change handle/alias (%s)\r\n
Choice: 
\nThat name is invalid.  Access denied!\n
\r\nThat username is already in use.
\r\nHandle/Alias    : 
\nThat handle is invalid.  Access denied!\n
\r\nThat handle is already in use.
\r\nPhone Number   : 
\r\nPassword       : 
\r\nStreet address : 
\r\nCity/Town      : 
\r\nState/Province : 
\r\nPostal code    : 
Newquest
\r\nYour user ID number is %s%d and your password is %s.\r\n
\r\nYou may use either your username or ID number, but using
the ID number will locate your account faster.  Please
record this information for future logons.
\r\nOne moment...
\r\n\r\nYou may now logon with your new account.\r\n
\r\nEnter your current password: 
\r\nInvalid!\r\n
MRQ
\r\n(M)anual change, (R)andom, or (Q)uit? 
New password: 
Verify new password: 
\r\nVerification failed.  Password not changed.\r\n
\r\nInvalid!\r\n
\r\nYour new password is '%s'.\r\n
Off
On
Adjusting parameters
\r\n(C) Computer type      (now %s)\r\n
(E) Expert mode        (now %s)\r\n
(G) Graphics type      (now %d)\r\n
(H) Hotkeys            (now 
On)
Off)
(L) Line length        (now %d)\r\n
(M) Set screen length  (now %d)
(M) Set screen length  (now Off)
(P) Change password
(Q) Quit
(S) Screen clearing    (now 
(T) Text Editor    (now 
\r\nChoice: 
 <Free>
Zmodem batch dl of %s%s
%s dl'd %s with Zmodem batch%s
Download.LOG
Bytes DL +%ld
\r\nBatch full.
\r\nFile not found!\r\n
\r\nFile marked.\r\n
\r\nNo files marked.\r\n
You do not have enough time to download that much.
%s batch download of %s.
%s downloaded %s with %s batch.
\r\nMessages range from %d to %d.  Start at: (%d) 
\r\nThat message area is not available from here.\r\n
\r\nStrip (C)arriage returns, (L)ine feeds, or (N)o stripping: 
CLN
ALHZNI
Compress with (A)rc, (L)ZH, L(H)A (Z)OO Z(I)P, (N)one: 
No. Message Area                       Type                    New
--- ------- ----                       ----                    ---
More?
\r\nNew addressee: 
\r\nNew message area: 
\r\nPrivate?
\r\nYou have exceeded your maximum message entry per call.
\r\nYou may not mark any more messages.\r\n
\r\nMessage number to mark: 
\r\nMessage marked.
\r\nInvalid message number.\r\n
\r\nThere is an attached file.  Use command 'D' to download.
ADFKQRT?E
\r\nMessage Command: 
\r\n(A)gain
(D)ownload the attached file
(F)orward message
(K)ill message
(Q)uit reading messages
(R)eply to message
(T)ext file dump
\r\nYou may not edit EchoMail.\r\n
Filename to export to: 
Replying to message
Replying to message in area #%d
\r\nYour access level is not cleared to enter any of these areas.\r\n
\r\n(A)ll new
(D)ownload messages
(T)hread read all new
~QADT
\r\nNew message area: 
Message area
In message area #%d
\r\nToggle bases for 'Read All New.'\r\n
\r\n#   Message area                  Scan
--- ------------                  ----\r\n
\r\nToggle which area(s): 
\r\nMessage number to kill: 
Entering message
Uploading message in area #%d
\r\nAccess denied!\r\n
\r\nNo messages.\r\n
\r\nEnter search string: 
\r\nNo new messages...
Invalid message number.
\r\nScanning message headers
 (searching for %s)
CMQ
\r\n(C)ontinue  (M)ark  (Q)uit: 
\r\n(M)ark  (Q)uit: 
(E)dit message
(S)can replies
\r\nAbort global read?
Using message download utility
Strip: 
Carriage returns
Nothing
Line feeds
Compression: 
NONE
\r\nReconfigure?
\r\nModify message high read counters?
\r\n\r\n(A)ll new messages\r\n(Q)uit\r\n
~AQ
Base to grab messages from: 
\n *** Messages from area %s ***\n
\r\nProcessing messages in %s area...
\r\nYou may only download a maximum of %d messages at a time.\r\n\r\n
\r\n\r\n%d messages taken so far.  Grab more?
\r\nNo messages taken.  Aborting...\r\n
\r\nARCing message file... 
\r\nZIPping message file... 
\r\nLHARCing message file... 
\r\nLZing message file... 
\r\nZOOing message file... 
\r\n\r\nReady to transmit packet of messages.
(PRESS RETURN)
\r\nPost a message in %s before continuing?
Entering message in area #%d
\r\n(F)orward
(M)arked
(N)ew (default)
(Q)uit
(R)everse
(T)hread order forward
FMNQRT
\r\nRead option: 
\r\nRead continuously?
ADEFKOPQRST?
(O)riginal message
(P)revious message
\r\nToo deep!\r\n
\r\nOriginal no longer exists.\r\n
\r\nMessage will go to %s (%s) and will cost %d.\r\n\r\n
Can't Open %s\n
Can't find %d:%d/0\n
Mseek error %ld result %ld\n
read error\n
\r\n\r\nAll commands preceded by '/'.\r\n
/A Abort
/B Change Subject
/C Center all text
/D Delete lines
/E Edit line
/F Change 'From' field
/I Insert text
/J Center justify previous line
/L List lines
/N New (start over)
/Q Insert quoted message here
/R Search/Replace text
/S Save
// Output a '/' (no command)
/? Help\r\n
/ABCDEFIJLNQRS?
Abort?
List from line [1]: 
To line [%d]: 
\r\nYou did not quote!\r\n
Delete from line: 
To line: 
Deleted lines %d to %d.
Done.
From: 
Subject: 
You may not insert more lines.
Insert after line: 
Insert text mode.  To end, enter '/I' again.
Edit line: 
Replace text in line: 
\r\nThat line currently contains:\r\n%s\r\n
String to replace: 
String not found.
Replace with: 
\r\nModified line: \r\n%s\r\n
\r\n4 lines remaining.
Error opening!
\r\nSaving...
Posted message in base %d (%s).
Left E-Mail to %s.
^ Carbon copy #%d to %s.
Left feedback.
Sent matrix mail to %d:%d/%d.
Can't open
\r\nSend this message to another user?
\r\nCarbon copy #%d 
To: 
\r\nMessage going to %s.\r\n\r\n
User not found.
LNQ
\r\n(L)ist nets, (N)ode search, or [Q]uit? 
\r\nContinue? [Y/n] 
NY
No
Press Return
Yes
\r\nEnter Zone:Net number to display: 
Address (RETURN=%d:%d/%d.%d) ? for Help: 
 Address (?=Help): 
\r\nAborted...
Node not found.
\r\nYou do not have enough network credits to send a message to that node...
Please contact your SysOp.\r\n
  Anonymous?
Attach file? (y/N) 
\r\nSorry, not enough storage space available.\r\n
         To <All>: 
All
To: 
\r\nMessage going to %s.\r\n\r\n
ALL
   Private? [y/N] 
   Private? [Y/n] 
User not found.
ZoneGate not found, aborting.
To: %s\r\n
Subject: %s
%s\r\n\r\nPress enter by itself to keep this subject.\r\n\r\n
Enter full path and filename: 
Filename: 
  Copy file? [y/N] 
Filename %s
Path %s
Please enter original path and filename of message text\r\n: 
\r\nNew file...\r\n
%d lines read...
Uploaded message not found
Message not found
%d lines uploaded...
\r\n All commands are preceded by '/'.
/S saves, /A aborts.  Do '/?' for a full list of commands.
There are %d lines available.\r\n\r\n
Can't Find %s
Header on %s too small (%ld bytes)
Can't Open %s
Error Reading %s
\n\rPlease hang up!\r\r
Receiving Mail
LoTek transfer initiated.
Call had successful transfer.
No transfer this call.
YooHoo block filled Origin %d:%d/%d.%d
Local Password '%s'
session password = '%s'
badnode disconnect %d:%d/%d.%d
badcserial disconnect %ld
Remote mailer is %s V%d.%02d
Remote mailer is #%d V%d.%02d
Password protected session
Invalid password
Invalid password: In %s Out %s
Poll packet generated
Error generating auto-poll
Packet from %d:%d/%d.%d to %d:%d/%d.%d
Sending mail to %d:%d/%d.%d
Point connection hex address %s
Searching for %s
Found %s
Freq being made
%s not sent adding ->%s
No incoming file requests
Remote freq'd %s
Opened Freq.ctl
Invalid freq password
File request aborted Restricted
Sending FILES.TXT
Closed Freq.ctl
Using LoTek style transfer.
Mailpacket sent ok
ZedZap session complete
Door not found error
\r\nSorry, that option is not available.\r\n
\r\n %%% Too many doors %%% \r\n
Error in Doors.Dat
\r\nThere are no doors you have access to.\r\n
Q~
\r\nEnter the door you wish to open (Q to Quit): 
\r\nThere are currently %d doors in use, which is the system defined\r\nmaximum.  Come back in a few minutes.\r\n\r\n
\r\nThat is a single-user door currently in use by another user.
Please try again in a few minutes.\r\n
In a door
Entered door %s.
Can't create DoorControl port!
\r\nSearch option: 
\r\nSince date (MMDDYY): 
\r\nInvalid date.\r\n
\r\nEnter file number to start with: 
MNDQV
\r\n(M)ark  (N)ext  (D)ownload  (Q)uit  [V]iew: 
Filespec: 
\r\nNo files to download.\r\n
DEKMQSV$?
File command (? for help): 
Command: 
\r\n[D]ownload this file
[E]dit file
[K]ill file
[M]ark file
[Q]uit
[S]how file again
[$]ysop file editor
[V]iew file.\r\n
\r\nKill file, 
\r\nFile deleted.
None found.\r\n
\r\n(M)ark  (D)ownload  (Q)uit  (V)iew: 
Empty file area.\r\n
\r\nDelete actual file from disk?
\r\n%ld%sbaud connection established on line #%d.\r\n\r\n
\r\rProcessing network mail only.  Please hang up.\r\r\r\r\r
\r\rPress ESCape or wait 30 seconds to enter the BBS...\r\r\r
Possible EMSI Attention sequence detected
EMSI Attention sequence detected
System password: 
\r\nIncorrect system password!
System closing for scheduled event.
Enter User ID or Name ('New' if no account): 
\r\nThere is no account by that name.  Use 'NEW' to logon as a new user.\r\n
\r\nYou have no time left today.
\r\nSystem will be unavailable in %d minutes.\r\n\r\n
\r\nYou have exceeded your maximum calls allowed for today.
Try again tomorrow.\r\n
\r\nThis is your last call for the day.\r\n\r\n
\r\nYou have %d more call(s) today.\r\n\r\n
Unknown
Amiga 3000
Amiga 500/1000
Amiga 2000 based
Apple II series
Apple Macintosh
Atari 8-bit
Atari ST/Mega
Commodore 64/128
IBM PC/XT/AT
UNIX Based
Other
\r\nThere are one or more incomplete Zmodem file transfers.\r\n
\r\nIncomplete Zmodem file transfer(s) pending:\r\n
%s, %ld bytes: (K)ill or (S)ave to resume? 
KS
File deleted.
\r\nThe following files have been marked for download:
\r\nTotal: %ld bytes.\r\nEstimated download time: %d:%02d minutes at %ld baud.\r\n
\r\nTotal: %ld bytes.\r\nEstimated download time: %d:%02d minutes at %ld baud.\r\n
WARNING! You have selected to download more than your remaining time will
allow. You MUST remove a file from the list
(C)ontinue, (L)ist, (P)urge, (R)emove: 
CLPR
\r\nNumber to remove: 
Hanging up in 5 seconds.  Press any key to abort.
Hanging!\r\n
ACILNSTUV
\r\nListing mode: \r\n
  (A)ll          (C)hronologically
 S(I)nce date   A(L)phabetically
  (N)ew        
 (S)tart at number
 (T)ext search 
(U)ploader     
Un[V]alidated
Protocol: 
Y-Modem G can only be used with error correcting modems,
Please choose another protocol
\r\nReady to receive with 
  %ldK available upload space.
APSH
\r\n(a)bort, (p)rotocol, (S)tart: 
\r\nNow receiving with %s\n
\r\n%s: %ld bytes.\r\nEstimated download time: %d:%02d minutes at %ld baud.\r\n
\r\n%s: %ld bytes.\r\nEstimated download time: %d:%02d minutes at %ld baud.\r\n
\r\nYou do not have enough time remaining to download that much.\r\n
\r\nYou do not have enough time remaining to download %s.\r\n
Ready to transfer with 
\r\n(a)bort, (h)angup upon completion, (p)rotocol, (S)tart: 
\r\n(a)bort, do not (h)angup, (p)rotocol, (S)tart: 
Now sending with %s\r\n
\r\nTransfer successful!\r\n
%s download of %s.
\r\nFilespec (#%d, <Return> completes): 
\r\nFilespec: 
%s files can't be viewed.
Two lines available for description. Use one or both.
\nDescription (%s): 
Desc. cont. (%s): 
You must enter a longer description.
\r\nDo you wish to enter a long description?
Transfer time: 
Access level : [Unvalidated] 
Access level : 
File name    : 
File number  : 
Uploader     : 
File size    : 
Uploaded on  : 
Never
Last download: 
Access count : 
%s%d:%02d minutes\r\n
%s%d:%02d minutes\r\n
Short desc.  : 
More? [Y/n/c] 
YNC
Reading messages
Reading msg #%d in area #%d
Message #%d %s (Read: %d)
Message #%d %s (Read: %d)
Date: %s\r\n
Date: %s\r\n
 <Private>
 <Private>
 <Forwarded>
 <Forwarded>
Anonymous
From: %s%s\r\n
From: %s%s\r\n
 <Received>
 <Received>
  To: %s%s
  To: %s%s
Subj: %s
Subj: %s
File: %s
File: %s
\r\nMessage is reply to #%d.\r\n
\r\nReply: 
\r\nReplies: 
From %s to %s
\r\n#%d Subj: %-21.20s  %-40.39s
  *In a message dated %s %s writes:%s
  *Message edited by %s:%s\r\n
Message #%d %s (Read: %d)%s
Date: %s%s
From: %s%s%s
  To: %s%s%s
Subj: %s%s%s
File: %s%s%s
Message is reply to #%d.%s
Searching file areas for %s...
\r\n\r\n                         (B)rowse new files (verbose)
                         (N)ew files scan
                         (D)ownload marked files
                         (Q)uit\r\n
\r\nViewing archive...\r\n\r\n
Please hold, checking archive %s: 
Failed!\r\n
OK
No new bulletins since last date on.\r\n
Updated bulletins since last date on: %d
\nDirectory of %s\n
\r\n%d files found in %ld bytes.\r\n
\r\nNo files found.
Handle           : %s
Phone number     : %s
Computer         : %s
Access level     : %d (%s)
Access level     : %d
Network credits  : %ld
Messages entered : %d
Files uploaded   : %ld Files
Files downloaded : %ld Files
Bytes uploaded   : %ld Bytes
Bytes downloaded : %ld Bytes (%ld free remaining)
Bytes downloaded : %ld Bytes
Unlimited
DL Allowance     : %s files / %s bytes
Door points      : %ld
Calls to system  : %d times
Calls today      : %d (of %d)
Minutes per day  : %d
Minutes used     : %d
Time remaining   : %d minutes
Password         : %s
Search string: 
SLQ
\r\n(S)hort or (L)ong description, or (Q)uit? 
Editing description (%s).\r\n\r\n
Description line1: 
Description line2: 
MKQSRFUILANDVZTY?
\r\nFile edit: 
Move to area: 
Moving file...
\r\nErase original file?
File listing removed.
\r\nDelete actual file from disk?
\r\nFile is now free.\r\n
\r\nFile no longer free.\r\n
Filename (now %s): 
Uploader (now %s): 
Size (now %ld): 
Access (now %d)  : 
0 uses normal file area pathnames.
Path of Fpath.CFG %d  : 
Number of accesses (now %d)  : 
\r\nFile already validated!\r\n
\r\nFile validated.\r\n
\r\nDate of upload (MMDDYY): 
\r\nInvalid date.\r\n
OFF
ON
Choice (Q to Quit, T to Toggle D/L Now [%s]): 
\r\nNo such file.\r\n
\r\nSorry, that option is not available.\r\n
\r\nSorry, your access is not high enough.\r\n
<%s node %d loaded in hidden mode>\n
Cannot find %s.. Waiting...\n
Waiting for MEBBSBase to initialize...\n
MEBBSBase not initialized... Shutting down.\n
Please hold, rolling over msg base #%d (may take several minutes)...
Rolled over msg base #%d
\r\nLocal node online.\r\n
Immediate Call Request
Node number: 
Address chosen %d:%d/%d.%d
Are you sure [Y/n]: