@DATABASE "MultiIndicator.guide V1.8" @NODE MAIN "MultiIndicator V1.8 ©1993'94 by Andreas Baum" @{b}@{u}MultiIndicator V1.8 ©1993'94 Andreas Baum@{ub}@{uu} @{u}Table of contents@{uu} @{"Copyright" link Copyright} @{"What's MultiIndicator ?" link Was} @{"Why MultiIndicator ?" link Warum} @{"Where I get new Versions ?" link Woher} @{"Hardware Requirements" link Hardware} @{"Software Requirements" link Software} @{"Installation" link Installation} @{"Start MultiIndicator" link Starten} @{"Help" link Hilfe} @{"Menue" link Menüs} @{"Gadgets" link Gadgets} @{"Keyboard" link Tastatur} @{"Mouse" link Maus} @{"Language" link Sprache} @{"History" link Entwicklung} @{"Bugs and Suggestion for Improvement" link Fehler} @{"Greetings" link Dank} @ENDNODE @NODE Copyright "Copyright" @{b}@{u}Copyright and Pass Conditions@{uu}@{ub} MultiIndicator @{u}isn't Public Domain@{uu} it's @{u}Giftware@{uu} !!! That means, the rights on the program stay by @{"me" link Baum}. You have to give @{"me" link Baum} a little present, for example money, FD-disks, sorted out games, homemade utilitys and other things, if you use MultiIndicator regularly. (An @{"E-Mail" link Baum} or a @{"letter" link Baum}, you think about MultiIndicator, would be enough.) @{b}Cheap, or ???@{ub} FD-dealer can always include this program in their FD-series, but they have to inform @{"me" link Baum} and all listed files have to pass. MI MI.info MI_D.help MI_GB.help MI_S.help MIndicator_D.guide MIndicator_D.guide.info MIndicator_GB.guide MIndicator_GB.guide.info @{b}Install (Dir)@{ub} InstallMI_D InstallMI_D.info InstallMI_F InstallMI_F.info InstallMI_GB InstallMI_GB.info InstallMI_S InstallMI_S.info @{b}CATALOGS (DIR)@{ub} MI.cd MI_?.ct MI_D.ct MI_E.ct MI_F.ct MI_S.ct Deutsch (Dir) MI.catalog Français (Dir) MI.catalog Svenska (Dir) MI.catalog @{b}MIFonts (Dir)@{ub} MI (Dir) 8 MI.font @{b}Exeption:@{ub} If MultiIndicator is distribute with @{"MultiTool II" link MultiTool}, than Boris Jakubaschk de- cides the pass conditions. Attention ! No warranties are made. All use is at your own risk. No liability or responsibility is assumed. @ENDNODE @NODE Baum "Programer" @{u}@{b}Address of Programer@{uu}@{ub} @{b}Andreas Baum@{ub} Eugen-Roth-Straße 25 92318 Neumarkt Germany Phone: 09181/20950 InterNET: @{b}abaum@betei.franken.de@{ub} FidoNET: @{b}2:2490/1092.6@fidonet@{ub} AmigaNET: 39:171/105.6@amiganet Z-NETZ: fatso@turtle.zer.sub.org @ENDNODE @NODE Was "What's MultiIndicator ?" @{b}@{u}What's MultiIndicator ?@{uu}@{ub} MultiIndicator is an ASC-HEX-Guide-indicator, but you have to remember that you need AmigaGuide, Multiview or a similar program to indicate Guide-files. This program is not an indicator for FD-disks, because it 1. is too voluminous, 2. needs OS2.0 or higher, 3. needs more memory as other indicators. @ENDNODE @NODE Warum "Why MultiIndicator ?" @{b}@{u}Why MultiIndicator ?@{uu}@{ub} Read the following features and @{u}compare@{uu} with other programs ! @{b}1.@{ub} MultiIndicator shows ASC-files (with or without ESC-sequences and Tabs), HEX-files and Guide-files (if a external Guideindicator is available). MultiIndicator dicides automatically if it uses the ASC-, HEX- or Guide- indicator. @{b}2.@{ub} MultiIndicator passes over ESC-sequences which would impair the output on the screen. @{b}3.@{ub} MultiIndicator can konfigure with Prefs-files, that means you can always konfigure MultiIndicator differencly. @{b}4.@{ub} MultiIndicator opens an AppIcon, if it was started from the Workbench, so you can use it when you need it. @{b}5.@{ub} MultiIndicator shows compressed Guide-files exactly. This is not possible if you use Amigaguide or Multiview alone. @{b}6.@{ub} You can compress and crypt files with XPK. MultiIndicator realizes if a file is compressed and crypted, for example you can compress a file with SHRI and than crypt that file with FEAL - MultiIndicator realizes this. @{b}7.@{ub} MultiIndicator has a comfortable printoption, so you needn't an specially printutility for ASC-files. @{b}8.@{ub} MultiIndicator supports the localization under Workbench 2.1. @{b}9.@{ub} MultiIndicator supports many options of OS 3.x, for example scaleable Gad- gets, NewLookMenues, Waitpointer and other. @{b}10.@{ub} MultiIndicator has a very good help. These are only the most important features. Look at the changes in @{"History" link Entwicklung}. @ENDNODE @NODE Woher "Where I get new Versions ?" @{b}New versions of MultiIndicator@{ub} You get the latest version of MultiIndicator about FTP-Server AmiNET (only big versionchanges), in good Mailboxes or at the @{b}Official Support Site for MultiIndicator@{b} @{b}+-------------------------------------------------------------------------+@{ub} @{b}| ° ¤ ________ ¤ __ __ ° ______¤ ________° ¤__ ¤ ° °_____ ¤ ¤ |@{ub} @{b}| · . ·/___ __/\ / /\ / /\ / __ /\/___ __/\ / /\ ¤ / ___/\¤ . · |@{ub} @{b}|¤ . ° \_ / /\_\// / // / // /_/ / /\_ / /\_\// / / · / /\__\/ · ¤ ° |@{ub} @{b}| · ¤ · / / / / / // / // __/ / / / / / / / / /_/ . ¤ ¤|@{ub} @{b}|·¤ · ¤ / / / / / // / // /| |_\/ ¤ / / / / / / / __/\¤ · ¤ |@{ub} @{b}| ° . ° / / / / /_// / // / | || / / / / /_/ ¤ / /\_\/· ¤ · .|@{ub} @{b}|¤ · . ¤ /_/ / /______/ //_/ /|_|| /_/ / /____/\ /_____/\ · ¤ ° |@{ub} @{b}| ¤ · \_\/ \______\/ \_\/ \_\ \_\/ \____\/ \_____\/ ¤ ° · |@{ub} @{b}| |@{ub} @{b}| G R A P H I C S B B S |@{ub} @{b}| |@{ub} @{b}+-------------------------------------------------------------------------+@{ub} @{b}| @{ub}Port 0: +49 (0)911 32410-66 ZYXEL 2400-19200 Baud ONLINE Port@{b} |@{ub} @{b}| @{ub}Port 2: +49 (0)911 32410-55 ISDN 38400-64000 Baud ONLINE Port@{b} |@{ub} @{b}| |@{ub} @{b}| @{ub}Port 1: +49 (0)911 32410-44 ZYXEL 2400-19200 Baud FIDO MAILER@{b} |@{ub} @{b}| @{ub}Port 3: +49 (0)911 32410-11 ISDN 38400-64000 Baud FIDO MAILER@{b} |@{ub} @{b}+-------------------------------------------------------------------------+@{ub} @{b}MultiIndicator@{ub} can @{b}frequested@{ub} about Fido with the @{b}FileRequest-MAGIC@{ub} @{b}MINDICATOR@{ub}: The latest version of MIndicator @{b}MIHISTORY@{ub}: History of MultiIndicator (all News) or you can download @{b}Online@{ub}. MultiIndicator is in the board @{b}>Support/FatsoSoft/@{ub} @{b}ratiofree@{ub} of course. Use @{b}SAUGER@{ub} as Username and @{b}DURST@{ub} as Password. @ENDNODE @NODE MultiTool "MultiTool II" @{b}@{u}Information about MultiTool II@{uu}@{ub} MultiTool II is a great Dos-Utility. You can get this program about FTP-server (AmiNET), in good mailboxes or at the @{b}Official Support Site for MTool II@{ub} @{b}________ ____ ____ ________ ________ @{ub} @{b}/\ \ \ \ \ / / / / / / @{ub} @{b}/ \ \_______\ \ \ / / /_______/ /_______/ @{ub} @{b}\ \ __/ / \ \/ / \ \___ \ \___ @{ub} @{b}\ \ | / / \ \ / \ _\ \ \ _\ \ @{ub} @{b}___ \ \ |_\ /\ \ _\/ \/_____\ \/_____\ @{ub} @{b}/ /__\___\ ___\/__\ /\/ / ____\ \ ____\ \ @{ub} @{b}\ / / / / / / / \ / / \ / @{ub} @{b}\/_______/ /_______/ /___/ /_______\/ /_______\/ -F-W-K- @{ub} Line 1: ++49-(0)-711-617291 - 19.2k - ZYX/v.32bis/v.42bis/MNP5 Line 2: ++49-(0)-711-6159399 - 14.4k - v.32bis/v.42bis/MNP5 @{b}Filerequest-MAGIC@{ub} @{b}MTOOL@{ub}: The latest Version of MTool @{b}MTOOLINFO@{ub}: Infos about the current Version of MTool MultiTool II was coded by @{b}Boris Jakubaschk@{ub} Neue Straße 14/1 70186 Stuttgart Germany E-Mail: Boris@alice.tynet.sub.org @ENDNODE @NODE Hardware "Hardware Requirements" @{b}@{u}Hardware Requirements for MultiIndicator@{uu}@{ub} You need an Amiga with 512 KByte (@{u}better 1 MByte or more@{uu}), at least OS 2.x and two disk drives or a harddisk. MultiIndicator was coded on an Amiga 4000-040 with OS 3.0 and tested on: A4000-040 with 18 MByte and OS 3.0 and Picasso II A4000-040 with 6 MByte and OS 3.0 A3000 with 10 MByte and OS 2.0 + OS 2.1 and OmniBus Graphiccard A500+ with 1 MByte and OS 2.0 + OS 2.1 A500 with 512 KByte and OS 2.0 + OS 2.1 @ENDNODE @NODE Software "Software Requirements" @{b}@{u}Software Requirements for MultiIndicator@{uu}@{ub} For the installation you need the @{b}Commodoreinstaller@{ub}. Would you indicate XPK packed files you need the @{b}XPK-paket@{ub}. Would you also indicate powerpacked files you need also the @{b}PowerPacker.library@{ub}. Would you indicate Guide-files you need @{b}AmigaGuige@{ub} or @{b}Multiview@{ub} and the @{b}Amiga-@{ub} @{b}Guide.library@{ub}. All these programs were @{b}not@{ub} included in the MultiIndicator-archiv, because you get the newest version of these programs from every good mailbox or from FD-disks. @ENDNODE @NODE Installation "Installation" @{b}@{u}Install MultiIndicator@{uu}@{ub} Use the @{b}InstallMI_?@{ub}-Script to install MultiIndicator. @ENDNODE @NODE Starten "Start MultiIndicator" @{b}@{u}Start MultiIndicator@{uu}@{ub} MultiIndicator either can start about Workbench or from Shell. @{b}Workbench@{ub} @{"about Icon" link Icon} @{"as DefaultTool" link DefTool} @{"Shell" link Shell} @ENDNODE @NODE Icon "Icon" @{b}@{u}Start about Workbench with Icon@{uu}@{ub} For starting MultiIndicator about icon, you have to click the icon twice. MultiIndicator creates an appicon after it was started. If you click this app- icon twice, than an ASL-filerequester appears and you can select the file. If you drag and drop another icon on the appicon, than the file or the directory to this tcon will be indicated immediately. @{u}ToolTypes:@{uu} If you want to change the ToolTypes, click the MultiIndicatoricon and select the menuitem Information. Now change the ToolTypes and save it. @{b}Prefsfile@{ub}= (MultiIndicator will be added the ending .MIprefs if this wasn't declared and will be searched in the given path, in ENVARC:MIndicator/ and in ENV: MIndicator/.) @{b}IconX@{ub}= @{b}IconY@{ub}= @ENDNODE @NODE DefTool "DefaultTool" @{b}@{u}Start as DefaultTool@{uu}@{ub} If you want to use MultiIndicator as DefaultTool, than the program which should be indicated must have a projecticon. Click this projecticon and select the menuitem Information. The iconwindow appears including the DefaultToolline in which you enter MultiIndicator with complete path. If the file Standard.MIprefs exists the fonts, screen, guideindicator and so on were loaded from this file. If Standard.MIprefs doesn't exist, the internal settings were used. @ENDNODE @NODE Shell "Shell" @{b}@{u}Start from Shell@{uu}@{ub} If you start MultiIndicator from the Shell, you can load a @{"preferencefile" link Menüs}. @{u}Syntax from the Shell:@{uu} MI <@{b}File or Path@{ub}> [@{b}-PREF@{ub} <@{b}Prefsfile@{ub}>] @{b}File@{ub} Name of the indicating file @{b}Path@{ub} Name of the path which was used for the ASL-filerequester @{b}-PREF@{ub} Keyword that MultiIndicator knows you would load a @{"preferencefile" link Menüs} @{b}Prefsfile@{ub} Name and path of the @{"preferencefile" link Menüs} (MultiIndicator will be added the ending .MIprefs if this wasn't declared and will be searched in the given path, in ENVARC:MIndi- cator/ and in ENV:MIndicator/.) @{b}?@{ub} Shows syntax. @ENDNODE @NODE Hilfe "Help" @{b}@{u}The Help from MultiIndicator@{ub}@{uu} Place the pointer about a menuitem or a gadget and press the helpbutton. The file Mi.help must available in the directory ENVARC:MIndicator/ or ENV: MIndicator/. This does the @{b}InstallMI_?@{ub}-Script automatically. @ENDNODE @NODE Menüs "Menues" @{b}@{u}The Menues from MultiIndicator@{ub}@{uu} MultiIndicator containes following menuitems: Attention: Any menuitems are only available in ASC- or HEX-mode ! @{b}ASC&HEX@{ub} @{b}Projekt@{ub} ASC&HEX @{"Open... O" link Öffnen} ASC&HEX @{"About... A" link Über} ASC&HEX @{"Info... I" link Info} ASC&HEX @{"Quit Q" link Ende} @{b}ASC&HEX@{ub} @{b}Preferences@{ub} ASC&HEX @{"Load..." link Load} ASC&HEX @{"Save" link Save} ASC&HEX @{"Save as..." link Saveas} ASC @{"FormFeed" link FOR} ASC @{"ESC-Tabs" link ESC} ASC @{"Tabs" link TAB} ASC&HEX @{"Publicscreen..." link Pub} ASC @{"Guideindicator..." link GUI} ASC @{"Editor..." link Edi} ASC&HEX @{"Gadgetfont..." link GFo} ASC @{"ASC-Textfont..." link ATF} HEX @{"HEX-Textfont..." link HTF} @{b}ASC@{ub} @{b}Printer@{ub} ASC @{"Print... P" link PRT} @{b}ASC@{ub} @{b}Editor@{ub} ASC @{"Edit... E" link EDT} @{b}ASC@{ub} @{b}Miscellaneous@{ub} ASC @{"ASC » HEX" link A_H} ASC @{"HEX » ASC" link H_A} @ENDNODE @NODE Öffnen "Menuitem Open... O" @{b}@{u}The Menuitem Open... O@{uu}@{ub} Opens an ASL-filerequester in which you can select a new file. @ENDNODE @NODE Über "Menuitem About... A" @{b}@{u}The Menuitem About... A@{uu}@{ub} Opens a window which shows the name of the program, version and programer. @ENDNODE @NODE Info "Menuitem Info... I" @{b}@{u}The Menuitem Info... I@{uu}@{ub} Opens a window which gives informations about the loaded file, how packer was used ( if file compressed with XPK or PowerPacker ), the packed length, the unpacked length, the ratio and information about the chipmemory and fastmemo- ry. @ENDNODE @NODE Ende "Menuitem Quit Q" @{b}@{u}The Menuitem Quit Q@{uu}@{ub} If MultiIndicator was started about Shell or as DefaultTool, than MultiIndica- tor terminated. If MultiIndicator was started about Workbench, than the quit- window appears which ask you if you want to only close only the MultiIndica- torwindow or if you want to terminate the program. @ENDNODE @NODE Load "Menuitem Load..." @{b}@{u}The Menuitem Load...@{uu}@{ub} Opens an ASL-filerequester in which you can select and load the preference- file. The choosen settings will be activ immediately. @ENDNODE @NODE Save "Menuitem Save" @{b}@{u}The Menuitem Save@{uu}@{ub} The preferencefile Standard.MIPrefs will be saved in the directorys ENVARC: MIndicator/ and ENV:MIndicator/. @ENDNODE @NODE Saveas "Menuitem Save as..." @{b}@{u}The Menuitem Save as...@{uu}@{ub} Opens an ASL-filerequester in which you can save the preferencefile. The end- ing .MIprefs will be added, if this wouldn't be entered. @ENDNODE @NODE FOR "Menuitem FormFeed" @{b}@{u}The Menuitem FormFeed@{ub}@{uu} This menuitem is only available if the selected file is an ASC-file. Here you can select, if a formfeed is necessery or not. @ENDNODE @NODE ESC "Menuitem ESC-Tabs" @{b}@{u}The Menuitem ESC-Tabs@{uu}@{ub} This menuitem is only available if the selected file is an ASC-file. Here you can select, if ESC-sequencen and Tabs are shown or not. @{u}ESC-sequences which were rerecognized and executed:@{uu} @{b}ESCc@{ub} Cleared all modes, but no screenclear @{b}ESC[0m@{ub} Cleared all modes @{b}ESC[1m@{ub} Bold on @{b}ESC[3m@{ub} Italic on @{b}ESC[4m@{ub} Underline on @{b}ESC[7m@{ub} Invers on @{b}ESC[8m@{ub} Backgroundcolor for text @{b}ESC[22m@{ub} Bold off @{b}ESC[23m@{ub} Italic off @{b}ESC[24m@{ub} Underline off @{b}ESC[27m@{ub} Invers off @{b}ESC[3#m@{ub} Color (# = 0-7) for text @{b}ESC[39m@{ub} Color 1 for text @{b}ESC[4#m@{ub} Text in front of backgroundcolor (# = 0-7) @{b}ESC[49m@{ub} Text in front of backgroundcolor 0 Kombinations of this sequences were recogniced. For example: ESC[1;7;37m (bold,invers und textcolor 7). @{u}ESC-sequences which were rerecognized and deleted:@{uu} @{b}ESC[#u@{ub} Line length # @{b}ESC[#t@{ub} Line number # @{b}ESC[#x@{ub} Pixel spacing # from top @{b}ESC[#y@{ub} Pixel spacing # from left @{b}ESC[xx;yyH@{ub} Cursor in column xx, line yy @{b}ESC[J@{ub} Delete at cursor @{b}ESC[@@{ub} Insert space @{b}ESC[#A@{ub} Cursor # up @{b}ESC[#B@{ub} Cursor # down @{b}ESC[#C@{ub} Cursor # left @{b}ESC[#D@{ub} Cursor # right @{b}ESC[#E@{ub} Cursor # lines down @{b}ESC[#F@{ub} Cursor # lines up @{b}ESC[#K@{ub} to lineend # delete @{b}ESC[#L@{ub} # lines insert @{b}ESC[#M@{ub} # lines delete @{b}ESC[#P@{ub} # chars delete @{b}ESC[#S@{ub} scroll up # lines @{b}ESC[#T@{ub} scroll down # lines @ENDNODE @NODE TAB "Menuitem Tabs" @{b}@{u}The Menuitem Tabs@{uu}@{ub} This menuitem is only available if the selected file is an ASC-file. About this menuitem you can choose the tabwidth. @ENDNODE @NODE Pub "Menuitem Publicscreen..." @{b}@{u}The Menuitem Publicscreen...@{uu}@{ub} Shows a list with all opened publicscreens. You can now select the screen, on which the MultiIndicatorwindow will be opened. The windowheight and the win- dowwidth depends from the selected, visible screenarea. @ENDNODE @NODE GUI "Menuitem Guideindicator..." @{b}@{u}The Menuitem Guideindicator...@{uu}@{ub} This menuitem is only available if the selected file is an ASC-file. Opens an ASL-filerequester in which you can select the indicator for the Guide-files. @ENDNODE @NODE Edi "Menuitem Editor..." @{b}@{u}The Menuitem Editor...@{uu}@{ub} This menuitem is only available if the selected file is an ASC-file. Opens the editorwindow in which you can change the editor and the handing-over parameters. @ENDNODE @NODE ATF "Menuitem ASC-Textfont..." @{b}@{u}The Menuitem ASC-Textfont...@{ub}@{uu} This menuitem is only available if the selected file is an ASC-file. Opens an ASL-fontrequester in which you can select the ASC-font for the text. You may not select a proportionalfont. @ENDNODE @NODE HTF "Menuitem HEX-Textfont..." @{b}@{u}The Menuitem HEX-Textfont...@{ub}@{uu} This menuitem is only available if the selected file is an HEX-file. Opens an ASL-fontrequester in which you can select the HEX-font for the text. You may not select a proportionalfont. @ENDNODE @NODE GFo "Menuitem Gadgetfont..." @{b}@{u}The Menuitem Gadgetfont...@{ub}@{uu} Opens an ASL-fontrequester in which you can select the font for the gadgets. @ENDNODE @NODE PRT "Menuitem Print... P" @{b}@{u}The Menuitem Print... P@{ub}@{uu} This menuitem is only available if the selected file is an ASC-file. Opens the printerwindow, in which you can change printeroptions and start the printaction. @{u}Variables for head- and footline:@{uu} @{b}#f#@{ub} = filename @{b}#d#@{ub} = printdate @{b}#t#@{ub} = printtime @{b}#p#@{ub} = pagenumber See help for more informations. @ENDNODE @NODE EDT "Menuitem Edit... E" @{b}@{u}The Menuitem Edit... E@{ub}@{uu} This menuitem is only available if the selected file is an ASC-file. Starts the choosen editor with the handing-over parameters. The editor may not detach, when the editing text will be shown. Attention!!! If it's a packed file you have to use an editor which will be unpacked the file, before you can edit it. Otherwise you only get confused characters. @ENDNODE @NODE A_H "Menuitem ASC » HEX" @{b}@{u}The Menuitem ASC » HEX@{ub}@{uu} This menuitem is only available if the selected file is an ASC-file. You can switch from the ASC-display to the HEX-display. @ENDNODE @NODE H_A "Menuitem HEX » ASC" @{b}@{u}The Menuitem HEX » ASC@{ub}@{uu} This menuitem is only available if the selected file is an ASC-file which you have switched in HEX-mode. You can switch from the HEX-display to the ASC-display. @ENDNODE @NODE Gadgets "Gadgets" @{b}@{u}The Gadgets from MultiIndicator@{ub}@{uu} MultiIndicator contains the following gadgets: Textgadget @{"Path/Filename" link Text} Buttongadget @{"Search" link Suchen} Buttongadget @{"Next" link Next} Buttongadget @{"Previous" link Prev} Slidergadget @{"Vertical" link Vert} Slidergadget @{"Horizontal" link Horiz} @ENDNODE @NODE Text "Textgadget Path/Filename" @{b}@{u}The Textgadget Path/Filename@{ub}@{uu} Shows the name of the loaded file. If the name is too long, than the file- name will be split. @ENDNODE @NODE Suchen "Buttongadget Search" @{b}@{u}The Buttongadget Search@{ub}@{uu} Opens the searchwindow, in which you can enter the searchword and change another options. See help for more informations. @ENDNODE @NODE Next "Buttongadget Next" @{b}@{u}The Buttongadget Next@{ub}@{uu} Searches for the next item. If the next item was found, it will be marked. If no item was found, a window appears which informs you. This gadget is selectable if a searchword is inserted. @ENDNODE @NODE Prev "Buttongadget Previous" @{b}@{u}The Buttongadget Previous@{ub}@{uu} Searches for the previous item. If the previous item was found, it will be marked. If no item was found, a window appears which informs you. This gadget is selectable if a searchword is inserted. @ENDNODE @NODE Vert "Slidergadget Vertical" @{b}@{u}The Slidergadget Vertical@{ub}@{uu} With this gadget you can scroll the text by the line (arrows), pages (click below or above the beam) or independent (click in the beam and move). This works only if the text is longer as one screenpage. @ENDNODE @NODE Horiz "Slidergadget Horizontal" @{b}@{u}The Slidergadget Horizontal@{ub}@{uu} This gadget is only available if the selected file is an ASC-file. With this gadget you can scroll the text by the letter (arrows), pages (click left or right the beam) or independent (click in the beam and move). This works only if the text is widen as one screenpage. @ENDNODE @NODE Tastatur "Keyboard" @{b}@{u}Keyboardcontrol@{ub}@{uu} @{b}@{u}Window:@{ub}@{uu} @{b}ESC:@{ub} Mainwindow open -> MultiIndicator terminates Other window open -> window terminates @{b}@{u}StringGadgets:@{ub}@{uu} @{b}Tab:@{ub} Next stringgadget activate @{b}Shift + Tab:@{ub} Previous stringgadget activate @{b}Cursor down:@{ub} Next stringgadget activate @{b}Cursor up:@{ub} Previous stringgadget activate @{b}@{u}Gadgets allgemein:@{ub}@{uu} @{b}Underlined chars:@{ub} Activate the button or the stringgadget (Only if no stringgadget is activate) @{b}@{u}Textcontrol:@{ub}@{uu} @{b}Cursor up:@{ub} Line up @{b}Cursor down:@{ub} Line down @{b}Cursor left:@{ub} Char left (only ASC-description) @{b}Cursor right:@{ub} Char right (only ASC-description) @{b}Shift + Cursor...:@{ub} Page... @{b}Alt + Cursor...:@{ub} Goto textbegin -end @{b}Ctrl + Cursor...:@{ub} Goto textbegin -end @{u}Numberblock:@{uu} @{b}Cursor up = 8:@{ub} Line up @{b}Cursor down = 2:@{ub} Line down @{b}Cursor left = 4:@{ub} Char left (only ASC-description) @{b}Cursor right = 6:@{ub} Char right (only ASC-description) @{b}Pg Up = 9:@{ub} Page up @{b}Pg Dn = 3:@{ub} Page down @{b}Home = 7:@{ub} Goto textbegin @{b}End = 1:@{ub} Goto textend @ENDNODE @NODE Maus "Mouse" @{b}The Mousecontrol in MultiIndicator@{ub} When you press and hold the left mousebutton while the pointer is in the text- window, you can scroll the text. Two speeds are available which depends from the pointerposition. First part of the textwindow: Fast up-scrolling Second part of the textwindow: Slow up-scrolling Third part of the textwindow: Fast down-scrolling Fourth part of the textwindow: Slow down-scrolling @ENDNODE @NODE Sprache "Language" @{b}@{u}What Language Speaks MultiIndicator@{ub}@{uu} Have you at least Workbench 2.1, than you can start MultiIndicator in your language. You must copy the MI.catalog for your language in the directory: Locale:Catalogs/ (Which does @{b}InstallMI_?@{ub}-Script automatically) @{b}@{u}Appeal:@{ub}@{uu} I need the @{b}.ct-Files@{ub} for the languages Danish, Italian, Norwegian, Dutch and Portuguese, the @{b}.help-Files@{ub} for the languages Danish, French, Italian, Norwegian, Dutch, Portuguese and Spanish, the @{b}.guide-Files@{ub} for the languages Danish, French, Italian, Norwegian, Dutch, Portuguese, Swedish and Spanish, and the @{b}InstallMI_?@{ub}-Script-Files for the languages Danish, French, Italian, Norwegian, Dutch, Portuguese and Spanish. For the @{b}.ct-File@{ub} the File MI_?.cd is in the directory Catalogs. If you make a @{b}.help-File@{ub}, the text mustn't be longer than @{u}16 lines@{uu} and wider than @{u}50 chars@{uu}. If you make a @{b}.guide-File@{ub}, the text mustn't be wider than @{u}78 chars@{uu}. @{b}Thanks ahead@{ub}. @ENDNODE @NODE Entwicklung "History" @{b}@{u}The History@{uu}@{ub} 03.08.93 @{b}V0.0@{ub} Programing begin. ------------------------------------------------------------------------------ 12.08.93 @{b}V1.0@{ub} @{b}First public release.@{ub} ------------------------------------------------------------------------------ 16.08.93 @{b}V1.1@{ub} New loadroutine for ASC-text -> considerable faster New searchroutine for HEX and ASC -> faster New viewroutine for ASC-text -> conditional on the new loadroutine ------------------------------------------------------------------------------ 16.08.93 @{b}V1.11@{ub} Reworked Shell-parameter handing-over. ------------------------------------------------------------------------------ 17.08.93 @{b}V1.12@{ub} ASC-HEX_View can used as DefaultTool. ------------------------------------------------------------------------------ 18.08.93 @{b}V1.2@{ub} MultiIndicator opens an appicon if you start about Workbench. Handing-over ToolTypes. ------------------------------------------------------------------------------ 18.08.93 @{b}V1.21@{ub} Now you can select in the Searchwindow if the search starts always from the beginning and if the capitalization want to take in account. ------------------------------------------------------------------------------ 18.08.93 @{b}V1.22@{ub} Now textcontrol about keyboard. ------------------------------------------------------------------------------ 19.08.93 @{b}V1.23@{ub} Name of the program is now MultiIndicator. Keyboardcontrol like CygnusEd implement. (Boris Jakubaschk) ------------------------------------------------------------------------------ @{b}Second public release.@{ub} ------------------------------------------------------------------------------ 21.08.93 @{b}V1.3@{ub} MultiIndicator can indicate ESC-sequences and Tabs. ------------------------------------------------------------------------------ 25.08.93 @{b}V1.4@{ub} XPK-Packer and PowerPacker support. Infowindow available. Buttongadgets changes the look if you selct them. (Boris Jakubaschk) Keyboardcontrol chanced. Alt -> Ctrl. (Boris Jakubaschk) ------------------------------------------------------------------------------ 30.08.93 @{b}V1.5@{ub} Printoption for ASC-Texte implement. ------------------------------------------------------------------------------ @{b}Third public release.@{ub} ------------------------------------------------------------------------------ 02.09.93 @{b}V1.5a@{ub} Spanish Catalog from @{b}José Garcia@{ub}. Catalogs now works under OS3.x. Little Bugs removed. ------------------------------------------------------------------------------ 09.10.93 @{b}V1.6@{ub} NewLookMenues under OS3.x. In gadgets you can use proportionalfonts. Window get a zoomgadget. Printwindow reworked. Variables in head- footline allowed. The meaning of formfeed has changed ! Checkboxes and MXbuttons skaleable under OS3.x. Graphicsbug in the pubscreenwindow under OS3.x removed. Searchword will be indicated if it wasn't found. One enforcerhit removed. Text without lineend in the last line view exactely. More than one packstep allowed. Program can be terminated with ESC-button. Waitpointer changed -> faster If you start the program about appicon, it remembers the last path. Help implement. Dynamic stack implement. No stack is necessery, but no con- trol with mungwall possible. Installer implement. AmigaGuide implement. Swedish Catalog from @{b}Mikael Silfver@{ub}. New menuitem Open available. (Mikael Silfver) Only the visible area of the screen used. (Jens Bönisch) MI remembers always the last path. @{u}For keyboardfetishists !@{uu} Windows ( without passwordwindow and ASL-requester ) can close with ESC. In the searchwindow you have to press return twice if the stringgadget is activated and you want to start the search. ------------------------------------------------------------------------------ @{b}Fourth public release.@{ub} ------------------------------------------------------------------------------ 16.11.93 @{b}V1.7@{ub} Text in the passwordwindow is invisible. In stringgadgets you can jump with cursor up and cursor down. Program optimized -> c. 22% shorter. A few internal improvements. Now accessible about @{"E-Mail" link Baum}. Swedish Help-File from @{b}Mikael Silfver@{ub}. You can now use the altkey instead of the ctrlkey. (Mikael Silfver) Publicscreen can now select with a doubleclick. (Mikael Silfver) Little bugs removed. (Mikael Silfver) MI now knows Hex-Code 9b resp. ASC-code 155. This is the same as 'ESC['. (Would be used in many mailboxes) ------------------------------------------------------------------------------ @{b}Fifth public release.@{ub} ------------------------------------------------------------------------------ 12.01.94 @{b}V1.7@{ub} French Catalog from @{b}Pascal Aubert@{ub}. When the xpk????.librarys will be installed, the version will be checked. ( Not all !!! Sorry ) ------------------------------------------------------------------------------ @{b}Sixth public release.@{ub} ------------------------------------------------------------------------------ 24.02.94 @{b}V1.8@{ub} You can switch an ASC-text from ASC-mode to HEX-mode and than from HEX-mode to ASC-mode. (QWert) You can set an ASC-textfont and a HEX-textfont. (Mikael Silfver) You can call a external editor if the text is a ASC-text. You can scroll the text if you press and hold the left mouse- button while the pointer is in the text-window. You can choose the tabwidth. (Mikael Silfver) You can save settings with @{b}Save@{ub} and @{b}Save as@{ub} and load settings with @{b}Load@{ub}. Only one Shell-argument and three ToolTypes are available. Shell: With -PREF you can load the set- tings you wish. ToolTypes: Prefsfile=<@{"Prefsfile" link Menüs}> same as Shell. You can hand over printersettings without printing. Formfeeds in the text will be removed. In the Shell you can hand over a filename or pathname. If you drop a drawer- or a diskicon on the MultiIndicator- appicon the ASL-filerequester take with path. If you start MultiIndicator about the appicon then you can quit the program only if you choose the menuitem @{b}Quit@{ub}. Two enforcerhits removed. Publicscreen @{b}Default@{ub} added. So I hope the problems with pub- licscreenmanagers are solved. @{b}Default@{ub} means that the MultiIn- dicator-window will be opend on the defaultpublicscreen. (Adrian Demarais) Installer, AmigaGuide, XPK and the PowerPacker.library are removed, because the archive was to large. Memory will be allocated with MEMF_ANY, so you can use vir- tual memory with VMem. Font for ASC- and HEX-textfont for the resolution PAL- and NTSC-Hires added. Bug in the searchroutine removed. (Bill Bennett) English Help-File corrected. (Johan Billing) ------------------------------------------------------------------------------ @{b}Seventh public release.@{ub} ------------------------------------------------------------------------------ 20.03.94 @{b}V1.8@{ub} Shwedish Catalog and shwedish Help-File become complete. (@{b}Johan Billing@{ub}) ------------------------------------------------------------------------------ @{b}AmiNET public release.@{ub} ------------------------------------------------------------------------------ @ENDNODE @NODE Fehler "Bugs and suggestion for improvement" @{b}@{u}Bugs and suggestion for improvement@{ub}@{uu} Write (@{"mail" link Baum} or @{"letter" link Baum}) if you find a Bug or if you have a suggestion for improvement. @ENDNODE @NODE Dank "Greetings" @{b}@{u}The Greetings@{ub}@{uu} Thanks on: @{b}Klaus-Joachim Forster@{ub} for the Supportboard in the @{"Turtle" link Woher} @{b}Matt Dillon@{ub} for the DICE and DME @{b}Boris Jakubaschk@{ub} for the great Dos-Utility @{"MultiTool II" link MultiTool} @{b}Dietmar Eilert@{ub} for the Editor GoldED @{b}Aaron Digulla@{ub} for the Editor XDME @{b}Nico François@{ub} for the PowerPacker.library @{b}Urban Müller@{ub} for the XPK-Package @{b}Bryan Ford@{ub} for the XPK-Package @{b}Commodore@{ub} for the Amiga @{b}...@{ub} for the ... Document @{b}Mikael Silfver@{ub} for the swedish Help-File (Thanks) @{b}Johan Billing@{ub} for the english Help-File (Thanks) @{b}...@{ub} for the ... Help-File @{b}José Garcia@{ub} for the spanish Catalog (Thanks) @{b}Mikael Silfver@{ub} for the swedish Catalog (Thanks) @{b}Pascal Aubert@{ub} for the french Catalog (Thanks) @{b}...@{ub} for the ... Catalog and my ß-Tester (in alphabetical oder): Aubert Pascal, Baum Wolfgang, Billing Johan, Jakubaschk Boris, Jose Garcia, and Mikael Silfver and all who send me a mail or a letter. From gifts I won't speak. @ENDNODE