\def\filename{lastpage}
\def\fileversion{v0.1b}
\def\filedate{1994/06/25}
\def\docdate {1994/07/20}

% \CheckSum{33}
%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \<
%%   Equals        \=     Greater than  \>     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~}
%%
%
%\iffalse
%% Allow for things like |page \thepage\ of \pageref{LastPage}| to
%% get `page 5 of 23'
%\fi
%
% \DoNotIndex{\documentclass,\usepackage,\hfuzz,\small,\tt,\begin,\end}
% \DoNotIndex{\NeedsTeXFormat,\filedate,\fileversion,\DoNotIndex}
% \DoNotIndex{\def,\divide,\advance,\multiply}
% \DoNotIndex{\",\-,\H}
% \DoNotIndex{\ifthenelse,\and,\equal,\whiledo,\if,\fi}
% \DoNotIndex{\CodelineIndex,\EnableCrossrefs,\DisableCrossrefs}
% \DoNotIndex{\DocInput,\AltMacroFont}
% \DoNotIndex{\RecordChanges,\OnlyDescription}
%
% \title{The \texttt{lastpage} package\thanks{This file
%        has version number \fileversion, last
%        revised \filedate, documentation dated \docdate.}}
% \author{Jeff Goldberg\\
% \texttt{goldberg@nytud.hu}}
% \date{\docdate}
%
% \maketitle
%
%
% \begin{abstract}
%   This package puts the label \texttt{LastPage} into the
%   \texttt{.aux} file, allowing the user to use references
%   to the last page of a document.  This might be
%   particularly useful in places like headers or footers.
% \end{abstract}
%
% \section{Introduction}
%
% For various draft forms it is desirable to have a page reference
% to the last page so that page footers, for example, could contain
% something like ``page $N$ of $K$', where $N$ is the current page
% and $K$ is the last page.
% 
% This package defines a label, \texttt{LastPage}, which the user
% can refer to using the |\pageref| command.
% 
% \section{The user interface}
%
% Just load it with by placing
% \begin{verbatim}
% \usepackage{lastpage}
%\end{verbatim}
% in the preamble of your \LaTeXe\ source file.
%
%\DescribeMacro{LastPage}
% Once that is loaded, you will be able to make reference anywhere
% in your text to the label \texttt{LastPage}.  In particular you
% can either use the \textsf{fancyheadings} package, or your own
% redefinitions of the page headings and footings to get a reference
% to the last page, as in the example below.
% \begin{verbatim}
% \makeatletter
% \renewcommand{\@evenfoot}%
%    {\normalsize\slshape DRAFT \today\hfil
%     \upshape page {\thepage} of \pageref{LastPage}}
% \renewcommand{\@oddfoot}{\@evenfoot}
% \makeatother
%\end{verbatim}
% to get footers like ``\mbox{\textsl{DRAFT \today}\hspace{1cm}page 5 of 23}''
% into your document.  Or for text like,
% \begin{verbatim}
%   Hey, you don't write a \pageref{LastPage}~page letter every day,
%   you know.
%\end{verbatim}
% to get
% \begin{quote}
%   Hey, you don't write a 12~page letter every day,
%   you know.
% \end{quote}
% 
% \section{A few warnings}\label{sec:warn}
%
% This package uses the \LaTeXe\ directive of |\AtEndDocument|.  If
% you use other packages that do the same and actually put material
% at the end, then it is important to load \textsf{lastpage} after
% such other packages if you want the true last page.  That is
% if a package \textsf{xyzzy} uses |\AtEndDocument| to put
% out two pages of material at the end of the document, then
% to get the last page to be the page number of the second of those
% pages you need to load \textsf{lastpage} after \textsf{xyzzy} makes
% its call to |\AtEndDocument|
% 
% \subsection{Interaction with \textsf{endfloat}}\label{sec:endfloat}
%
% Version 2.0 (and earlier) of \textsf{endfloat} actually redefine
% the |\enddocument|, and so interfere drastically with the \LaTeXe\
% commands which make use of |\AtEndDocument|.  A newer version
% of \textsf{endfloat} exists
% in modern documentation form, which should be available from the same
% source where you received this file.
% 
% If you want your \texttt{LastPage} to label the last page of
% these end floats, you need to load \textsf{lastpage} after
% loading \textsf{endfloat}.  If, on the other hand, you want
% \texttt{LastPage} to refer to the last page, exclusive of the
% the floats at the end, then load in the reverse order.  For
% each of these, you will still need the modified version
% of \textsf{endfloat}.
%
% Other \LaTeX209 packages also seem to like to redefine |\enddocument|.
% In addition to the old \textsf{endfloat}, \textsf{harvard} comes to mind.
% All of these will need to be modified swiftly.  (How did these ever
% work together before? 
% I can't believe that nobody wanted harvard bibliography
% style and floats at the end before!)
%
% \subsection{General ordering and wish list}\label{sec:order}
%
% I believe that the output of a \LaTeXe\ run should be independent
% of the order in which package are loaded.  It would be possible
% to set this up, but it would take coordiniation of all package
% writers who use |\AtEndDocument|.  The actual call to |\AtEndDocument|
% would not occur during package loading, but some new command,
% like |\ExecuteAtEndDocument| would be called by the user after
% all such packages are loaded, with tags for each thing in the
% packages, so something like
% \begin{verbatim}
%   \usepackage{lastpage}
%   \usepackage{endfloat,xyzzy}
%   \ExecuteAtEndDocument{endfloat, xyzzy, lastpage}
%\end{verbatim}
% and the order of End Document material would be the \textsf{endfloat}
% material, followed by \textsf{xyzzy}, and finally by \textsf{lastpage}.
% 
% It is often the case that the same formats for which one
% must put tables and figure at the end, are the ones in which
% endnotes are also required.  If one wants to use \textsf{lastpage}
% here as well, then it is easy to get to three separate uses
% of |\AtEndDocument| (assuming one uses that for the endnotes as
% well).  Clearly it is not safe for any package writer or user
% to assume that no material will follow what they put into
% and |\AtEndDocument|.  This, in addition to the ordering, is
% a good reason to develop safe practices for use of this
% very powerful tool.
% 
% I will have to wait until someone else develops such a system, but
% I will gladly modify \textsf{lastpage} to comply with it.  Until then
% I will include a message
% which begins with \texttt{AED}
% in every usage of |\AtEndDocument|, and try to minimize any side
% effects my usage may have.
%
% \subsection{Ignorance is bliss}
%
% The author of this package is not only new to \LaTeXe, but also
% to \LaTeX209.  If I have duplicated something that already
% exists, forgive me.  I have always wanted this in \PlainTeX,
% but never had the robust cross referencing that \LaTeX\ provides.
% Now that I have made the big switch, I jumped at the chance
% to get this done.
%
%\StopEventually{\PrintIndex\PrintChanges}
%
% \section{The documentation driver file}
%
% The next bit of code contains the documentation driver file for
% \TeX{}, i.e., the file that will produce the documentation you are
% currently reading. It will be extracted from this file by the
% \texttt{docstrip} program, That is, run \LaTeX\ on \texttt{docstrip}
% and specify the \texttt{driver} option when \texttt{docstrip}
% asks for options.
%    \begin{macrocode}
%<*driver>
\documentclass[11pt]{ltxdoc}
\setlength\hfuzz{1pt}    % ignore slight overfulls
\CodelineIndex
\EnableCrossrefs
%\DisableCrossrefs   % Say \DisableCrossrefs if index is ready
%\RecordChanges       % Gather update information
%\OnlyDescription    % comment out for implementation details
\begin{document}
   \DocInput{lastpage.dtx}
\end{document}
%</driver>
%    \end{macrocode}
%
% \section{The implementation}
%
% We start by checking if this file was already loaded. If not we
% identify the current version.
% \changes{v0.99a}{1994/06/17}{First shot}
%    \begin{macrocode}
%<*package>
\NeedsTeXFormat{LaTeX2e}[1994/06/01]
%    \begin{macrocode}
\ProvidesPackage{lastpage}[\filedate\space\fileversion\space
             LaTeX2e package for refs to last page number (JPG)]
%    \end{macrocode}
%
% \begin{macro}{\lastpage@putlabel}
% Simply using |\label| wouldn't work; because labels wait
% for the output routines to work, and there may not be any
% more invocations of the output routines.
% To force the write out we need to do an |\immediate| write.
% Since the last page has been output, we are on the page after
% the last.  I subtract one from the page counter.  After the writeout
% I restore it again since there might be other things At the End
% of Document still to do.
%    \begin{macrocode} 
\def\lastpage@putlabel{\addtocounter{page}{-1}%
   \immediate\write\@auxout{\string
   \newlabel{LastPage}{{}{\thepage}}}%
   \addtocounter{page}{1}}
%    \end{macrocode}
% \end{macro}
%
%  The call to |\AtEndDocument| is simple.  I put in a |\message| to
% show what order thing are called done in (see section~\ref{sec:endfloat}).
%    \begin{macrocode} 
\AtEndDocument{%
   \message{AED: lastpage setting LastPage}%
   \clearpage\lastpage@putlabel}%
%</package>
%    \end{macrocode}
% 
% \section{Things to be done}\label{sec:todo}
%
% \begin{itemize}
% \item Allow user to specify a given page number.
% \item Allow user to specify a string other than \texttt{LastPage}
%       for the reference.
% \item Work on better order control as discussed in section~\ref{sec:order}.
% \item Work on general conventions for using |\AtEndDocument| generally.
%       (see section~\ref{sec:order}).
% \end{itemize}
% 
% \Finale
%
\endinput