****** INSTALLING THE PROGRAM *********************************************

     I  recommend  you  install  this  program  on a blank disk to make sure
     everything works properly.  Once you have formatted a disk,  and copied
     workbench 1.2 onto it, you are ready to start the installation.  If you
     have a hardrive, I'd  recommend making  a new  directory and  doing the
     install from that directory.   First,  you  need  to  get  the  correct
     archive program to remove  all of  the files  from the  archive and put
     them on a disk.  If the extension of the archive is .zoo, then you must
     use the ZOO utility.  If it is .arc, then you must use the ARC utility.
     put the archive in the directory where you want the program and type:

     [arc|zoo] x Meshugena

     After the archive program has finished working, type

     execute install

     and  your  amiga  will  happily  install  the  4  fonts  in your FONTS:
     directory.  Be sure you have enough room in your fonts directory before
     starting the  install_fonts procedure.  You also want to make sure that
     you don't already have  fonts in  your FONTS:  directory with  the same
     names as these:
          f80       - 80 columns normal font
          fld80     - graphics font with line segment glyphs.
          f132      - 132 columns normal font
          fld132    - graphics font with line segment glyphs.
          All of the previous listed fonts are 8 pixels high.

          The install  program will  also rename  the files  to their proper
          names so that you don't have  to worry  about it.   See  the fonts
          section if  you are  interested in using your own fonts instead of












          those that are supplied.

          The installation is now complete.  simple, eh?

          If you've made it this far, but have not done anything yet  out of
          fear, don't worry, here's the short explanation:
          1) make new workbench disk (copy df0: to df1:)
          2)  copy  .arc  or  .zoo  file  to  new  disk  (copy Meshugena.arc
             new_disk:)
          3) cd new_disk (replace new_disk with the appropriate name)
          4) arc x meshugena, or zoo x meshugena
          5) execute install
          6) your done.