US-Robotics 14400 Settings...

Ok this is for V42bis - works with ami-express and az comm.
No init for az is needed, Ami-Express init should  be 'ATS0=1G2'
and Ami-Express should be run with the -R option incase someone drops
carrier during a period where the Auto-Answer is off.

Type this into the modem: (use snap or just type it to AZ)

--------------------------------------------------------------------------
AT&F
AT&W
ATB1C1E1F1M1Q0V1X4&W
AT&A0&B1&C1&D2&G2&H1&W
AT&I0&J0&K3&L0&M4&W
AT&P0&R2&S0&X1&Y1&W
ATS11=38S21=001S26=000S15=008&W
ATB0S28=013&A3S27=000&W  ( DUAL STD: ATB1S28=013&A3S27=000&W )
--------------------------------------------------------------------------

IF YA HAVE A US ROBOTICS MODEM AND YOU AREW USING IT WITHIN THE UK YOU
SHOULD ALSO ADD THIS TO DISSABLE THE BUSY DETECT WHICH *WILL NOT* WORK

--------------------------------------------------------------------------
ATX1&W
--------------------------------------------------------------------------

Your workbench preferences (DEVS:SYSTEM-CONFIGURATION) should have the
serial section set as follows:

--------------------------------------------------------------------------
BAUD:....... 19200
BUFFER:..... 16000
READ BITS:.. 8
WRITE BITS:. 8
STOP BITS:.. 1
HANDSHAKING: RTS/CTS
PARITY:..... NONE
--------------------------------------------------------------------------

Also remember that Transfering from RAM: or a FAST HD is always best! And
dont run 17 other tasks with music and shadow of the beast 5 multitasking
coz it will really fuck with your Cps!