#ifndef INTUITION_PREFERENCES_H #define INTUITION_PREFERENCES_H TRUE /* ** preferences.h for ACE Basic ** ** Note: Translated to ACE by ConvertC2ACE ** @ MapMeadow Software, Nils Sjoholm ** ** ** Date: 09/01/95 ** ** */ /* ** This are the StructPointer defines for preferences.h */ #ifndef PreferencesPtr #define PreferencesPtr ADDRESS #endif /* ** End of StructPointer defines for preferences.h */ #ifndef EXEC_TYPES_H #include #endif #ifndef DEVICES_TIMER_H #include #endif /* ======================================================================== */ /* === Preferences ======================================================== */ /* ======================================================================== */ /* these are the definitions for the printer configurations */ #define FILENAME_SIZE 30 /* Filename size */ #define DEVNAME_SIZE 16 /* Device-name size */ #define POINTERSIZE (1 + 16 + 1) * 2 /* Size of Pointer data buffer */ /* These defines are for the default font size. These actually describe the * height of the defaults fonts. The default font type is the topaz * font, which is a fixed width font that can be used in either * eighty-column or sixty-column mode. The Preferences structure reflects * which is currently selected by the value found in the variable FontSize, * which may have either of the values defined below. These values actually * are used to select the height of the default font. By changing the * height, the resolution of the font changes as well. */ #define TOPAZ_EIGHTY 8 #define TOPAZ_SIXTY 9 /* Note: Starting with V36, and continuing with each new version of * Intuition, an increasing number of fields of STRUCT Preferences * are ignored by SetPrefs(). (Some fields are obeyed only at the * initial SetPrefs(), which comes from the devs:system-configuration * file). Elements are generally superseded as new hardware or software * features demand more information than fits in STRUCT Preferences. * Parts of STRUCT Preferences must be ignored so that applications * calling GetPrefs(), modifying some other part of STRUCT Preferences, * then calling SetPrefs(), don't end up truncating the extended * data. * * Consult the autodocs for SetPrefs() for further information as * to which fields are not always respected. */ STRUCT Preferences /* the default font height */ BYTE FontHeight /* height for system default font */ /* constant describing what's hooked up to the port */ BYTE PrinterPort /* printer port connection */ /* the baud rate of the port */ SHORTINT BaudRate /* baud rate for the serial port */ /* various timing rates */ timeval KeyRptSpeed /* repeat speed for keyboard */ timeval KeyRptDelay /* Delay before keys repeat */ timeval DoubleClick /* Interval allowed between clicks */ /* Intuition Pointer data */ STRING PointerMatrix SIZE 72 /* POINTERSIZE*SIZEOF(SHORTINT) */ /* Definition of pointer sprite */ BYTE XOffset /* X-Offset for active 'bit' */ BYTE YOffset /* Y-Offset for active 'bit' */ SHORTINT color17 /***********************************/ SHORTINT color18 /* Colours for sprite pointer */ SHORTINT color19 /***********************************/ SHORTINT PointerTicks /* Sensitivity of the pointer */ /* Workbench Screen colors */ SHORTINT color0 /***********************************/ SHORTINT color1 /* Standard default colours */ SHORTINT color2 /* Used in the Workbench */ SHORTINT color3 /***********************************/ /* positioning data for the Intuition View */ BYTE ViewXOffset /* Offset for top lefthand corner */ BYTE ViewYOffset /* X and Y dimensions */ SHORTINT ViewInitX SHORTINT ViewInitY /* View initial offset values */ SHORTINT EnableCLI /* CLI availability switch */ /* printer configurations */ SHORTINT PrinterType /* printer type */ STRING PrinterFilename SIZE 30 /* FILENAME_SIZE */ /* file FOR printer */ /* print format and quality configurations */ SHORTINT PrintPitch /* print pitch */ SHORTINT PrintQuality /* print quality */ SHORTINT PrintSpacing /* number of lines per inch */ SHORTINT PrintLeftMargin /* left margin in characters */ SHORTINT PrintRightMargin /* right margin in characters */ SHORTINT PrintImage /* positive or negative */ SHORTINT PrintAspect /* horizontal or vertical */ SHORTINT PrintShade /* b&w, half-tone, or color */ SHORTINT PrintThreshold /* darkness ctrl for b/w dumps */ /* print paper descriptors */ SHORTINT PaperSize /* paper size */ SHORTINT PaperLength /* paper length in number of lines */ SHORTINT PaperType /* continuous or single sheet */ /* Serial device settings: These are six nibble-fields in three bytes */ /* (these look a little strange so the defaults will map out to zero) */ BYTE SerRWBits /* upper nibble = (8-number of read bits) */ /* lower nibble = (8-number of write bits) */ BYTE SerStopBuf /* upper nibble = (number of stop bits - 1) */ /* lower nibble = (table value for BufSize) */ BYTE SerParShk /* upper nibble = (value for Parity setting) */ /* lower nibble = (value for Handshake mode) */ BYTE LaceWB /* if workbench is to be interlaced */ STRING Pad SIZE 12 STRING PrtDevName SIZE 16 /* DEVNAME_SIZE */ /* device used by printer.device * (omit the ".device") */ BYTE DefaultPrtUnit /* default unit opened by printer.device */ BYTE DefaultSerUnit /* default serial unit */ BYTE RowSizeChange /* affect NormalDisplayRows/Columns */ BYTE ColumnSizeChange SHORTINT PrintFlags /* user preference flags */ SHORTINT PrintMaxWidth /* max width of printed picture in 10ths/in */ SHORTINT PrintMaxHeight /* max height of printed picture in 10ths/in */ BYTE PrintDensity /* print density */ BYTE PrintXOffset /* offset of printed picture in 10ths/inch */ SHORTINT wb_Width /* override default workbench width */ SHORTINT wb_Height /* override default workbench height */ BYTE wb_Depth /* override default workbench depth */ BYTE ext_size /* extension information -- do not touch! */ /* extension size in blocks of 64 bytes */ END STRUCT /* Workbench Interlace (use one bit) */ #define LACEWB (&H1) #define LW_RESERVED 1 /* internal use only */ /* Enable_CLI */ #define SCREEN_DRAG (&H4000) #define MOUSE_ACCEL (&H8000&) /* PrinterPort */ #define PARALLEL_PRINTER &H00 #define SERIAL_PRINTER &H01 /* BaudRate */ #define BAUD_110 &H00 #define BAUD_300 &H01 #define BAUD_1200 &H02 #define BAUD_2400 &H03 #define BAUD_4800 &H04 #define BAUD_9600 &H05 #define BAUD_19200 &H06 #define BAUD_MIDI &H07 /* PaperType */ #define FANFOLD &H00 #define SINGLE &H80 /* PrintPitch */ #define PICA &H000 #define ELITE &H400 #define FINE &H800 /* PrintQuality */ #define DRAFT &H000 #define LETTER &H100 /* PrintSpacing */ #define SIX_LPI &H000 #define EIGHT_LPI &H200 /* Print Image */ #define IMAGE_POSITIVE &H00 #define IMAGE_NEGATIVE &H01 /* PrintAspect */ #define ASPECT_HORIZ &H00 #define ASPECT_VERT &H01 /* PrintShade */ #define SHADE_BW &H00 #define SHADE_GREYSCALE &H01 #define SHADE_COLOR &H02 /* PaperSize (all paper sizes have a zero in the lowest nybble) */ #define US_LETTER &H00 #define US_LEGAL &H10 #define N_TRACTOR &H20 #define W_TRACTOR &H30 #define CUSTOM &H40 /* New PaperSizes for V36: */ #define EURO_A0 &H50 /* European size A0: 841 x 1189 */ #define EURO_A1 &H60 /* European size A1: 594 x 841 */ #define EURO_A2 &H70 /* European size A2: 420 x 594 */ #define EURO_A3 &H80 /* European size A3: 297 x 420 */ #define EURO_A4 &H90 /* European size A4: 210 x 297 */ #define EURO_A5 &HA0 /* European size A5: 148 x 210 */ #define EURO_A6 &HB0 /* European size A6: 105 x 148 */ #define EURO_A7 &HC0 /* European size A7: 74 x 105 */ #define EURO_A8 &HD0 /* European size A8: 52 x 74 */ /* PrinterType */ #define CUSTOM_NAME &H00 #define ALPHA_P_101 &H01 #define BROTHER_15XL &H02 #define CBM_MPS1000 &H03 #define DIAB_630 &H04 #define DIAB_ADV_D25 &H05 #define DIAB_C_150 &H06 #define EPSON &H07 #define EPSON_JX_80 &H08 #define OKIMATE_20 &H09 #define QUME_LP_20 &H0A /* new printer entries, 3 October 1985 */ #define HP_LASERJET &H0B #define HP_LASERJET_PLUS &H0C /* Serial Input Buffer Sizes */ #define SBUF_512 &H00 #define SBUF_1024 &H01 #define SBUF_2048 &H02 #define SBUF_4096 &H03 #define SBUF_8000 &H04 #define SBUF_16000 &H05 /* Serial Bit Masks */ #define SREAD_BITS &HF0 /* for SerRWBits */ #define SWRITE_BITS &H0F #define SSTOP_BITS &HF0 /* for SerStopBuf */ #define SBUFSIZE_BITS &H0F #define SPARITY_BITS &HF0 /* for SerParShk */ #define SHSHAKE_BITS &H0F /* Serial Parity (upper nibble, after being shifted by * macro SPARNUM() ) */ #define SPARITY_NONE 0 #define SPARITY_EVEN 1 #define SPARITY_ODD 2 /* New parity definitions for V36: */ #define SPARITY_MARK 3 #define SPARITY_SPACE 4 /* Serial Handshake Mode (lower nibble, after masking using * macro SHANKNUM() ) */ #define SHSHAKE_XON 0 #define SHSHAKE_RTS 1 #define SHSHAKE_NONE 2 /* new defines for PrintFlags */ #define CORRECT_RED &H0001 /* color correct red shades */ #define CORRECT_GREEN &H0002 /* color correct green shades */ #define CORRECT_BLUE &H0004 /* color correct blue shades */ #define CENTER_IMAGE &H0008 /* center image on paper */ #define IGNORE_DIMENSIONS &H0000 /* ignore max width/height settings */ #define BOUNDED_DIMENSIONS &H0010 /* use max width/height as boundaries */ #define ABSOLUTE_DIMENSIONS &H0020 /* use max width/height as absolutes */ #define PIXEL_DIMENSIONS &H0040 /* use max width/height as prt pixels */ #define MULTIPLY_DIMENSIONS &H0080 /* use max width/height as multipliers */ #define INTEGER_SCALING &H0100 /* force integer scaling */ #define ORDERED_DITHERING &H0000 /* ordered dithering */ #define HALFTONE_DITHERING &H0200 /* halftone dithering */ #define FLOYD_DITHERING &H0400 /* Floyd-Steinberg dithering */ #define ANTI_ALIAS &H0800 /* anti-alias image */ #define GREY_SCALE2 &H1000 /* for use with hi-res monitor */ /* masks used for checking bits */ #define CORRECT_RGB_MASK (CORRECT_RED OR CORRECT_GREEN OR CORRECT_BLUE) #define DIMENSIONS_MASK (BOUNDED_DIMENSIONS OR ABSOLUTE_DIMENSIONS OR PIXEL_DIMENSIONS OR MULTIPLY_DIMENSIONS) #define DITHERING_MASK (HALFTONE_DITHERING OR FLOYD_DITHERING) #endif