The doc file is huge as you've no doubt noticed.  It's also
   formatted so that it can be printed to a laser or pin printer.  You'll
   need to set up each printer a bit differently in order to print the
   docs correctly, so follow these directions.
   
      The document is formatted at 60 lpp, 75 cpl @ 10 cpi.  At the end
   of each page is a ^L^M  (Form Feed - Carriage Return) combination.
   The C/R is present since some laser printers do not reset the current
   character position after receiving a form feed character.  Most laser
   printers are only capable of printing 60 lpp and since the document
   is formatted to 60 lines the skip-over-perforation option in the
   printer must be turned off.  Line printers usually print 66 lpp so it
   must have it's skip-over-perforation option turned on.  The left margin
   for both types of printers should be set to 5 so that there is room to
   3-hole punch the output for placement in a binder.
   
      Two batch files are included with this archive to handle the
   details of these differences, laser.bat and line.bat.

   
   Laser printers:
   ---------------
      The Laser.bat file assumes the use of an HP compatible laser
   printer.  Click on the icon to execute the batch file or execute it
   from the CLI directly.
   
   
   Pin printers:
   -------------
      The Line.bat file assumes the use of any Epson compatible pin
   printer.  Click on the icon to execute the batch file or execute it
   from the CLI directly.
   
   
      You should get a 208 page document.  If you have any problems with
   this please let me know.
   
   
                                                      Jack Radigan