; $VER: HDSetup 38.24 (11.5.92)
; Script to perform various HD duties

(complete 0)


;=============================================================================
; English strings

(set @abort-button "Abort")

(set #bad-kick
(cat "You must be using Kickstart 2.04 to install Workbench 2.1"
))

(set #bad-boot
(cat "Please boot from the \"Amiga Install\" disk Version 2.1 "
     "before running this hard drive setup tool"
))

(set #introduction
(cat "\nHDSetup lets you perform various hard drive setup tasks. You must "
     "own one of the following hardware components in order to be able to "
     "use this program:\n\n"
     "· A590    hard drive controller\n"
     "· A2091   hard drive controller\n"
     "· A600HD  Amiga system         \n"
     "· A2000HD Amiga system         \n"
     "· A2500   Amiga system         \n"
     "· A3000   Amiga system         \n"
     "· A3000T  Amiga system         \n"
))

(set #what-to-do
(cat "\nPlease select the operation to perform\n"
))

(set #what-to-do-help
(cat "The \"Partition Hard Drive\" selection will "
     "low-level format your hard drive. The drive "
     "will be re-partitioned to the standard "
     "configuration.\n\n"
     "The \"Turn Reselection On\" and \"Turn "
     "Reselection Off\" selections let you "
     "control reselection of all SCSI and IDE devices "
     "connected to the system.\n\n"
     "Finally, the \"Update A3000/A3000T SuperKickstart\" "
     "selection lets Amiga 3000 and 3000T owners upgrade "
     "their machine's SuperKickstart file.\n\n"
     @askchoice-help
))

(set #what-to-do-1
(cat "Partition Hard Drive"
))

(set #what-to-do-2
(cat "Turn Reselection On"
))

(set #what-to-do-3
(cat "Turn Reselection Off"
))

(set #what-to-do-4
(cat "Update A3000/A3000T SuperKickstart"
))

(set #ask-unit
(cat "\nThis will low-level format your hard drive. "
     "The drive will be re-partitioned to the "
     "standard configuration.\n\n"
     "Which hard drive unit should be partitioned?\n\n"
     "Amiga systems with SCSI hard drives "
     "(A590, A2000HD, A2500, A3000) normally "
     "use unit 6. Amiga systems with IDE "
     "hard drives (A600HD) normally use unit 0."
))

(set #ask-unit-help
(cat "\nPartitioning a hard drive involves "
     "dividing it into separate sections. "
     "This program will divide your hard drive "
     "into two main sections: WB_2.x and Work. "
     "WB_2.x is where system files are stored, "
     "where Workbench files reside. Work is "
     "where you store your own files.\n\n"
     "Each SCSI or IDE hard drive has a "
     "unit number associated with it. This "
     "number is typically controlled by jumpers "
     "on the hard drive.\n\n"
     "Amiga systems with SCSI hard drives "
     "(A590, A2000HD, A2500, A3000) are shipped "
     "using unit 6. Amiga systems with IDE "
     "hard drives (A600HD) are shipped using unit 0.\n\n"
))

(set #confirm-partition
(cat "\n\nDo you wish to partition your hard drive unit %lu ?\n\n"
     "All data on the hard drive will be lost!"
))

(set #confirm-partition-help
(cat "\nPartitioning a hard drive involves "
     "dividing it into separate sections. "
     "This program will divide your hard drive "
     "into two main sections: WB_2.x and Work. "
     "WB_2.x is where system files are stored, "
     "where Workbench files reside. Work is "
     "where you store your own files.\n\n"
))

(set #confirm-partition-1
(cat "Proceed"
))

(set #confirm-partition-2
(cat "Cancel"
))

(set #hw-failure
(cat "Procedure failed!\n\nCheck your hardware and try again."
))

(set #use-hdtoolbox
(cat "You will need to use HDToolBox to do "
     "custom partitioning."
))

(set #complete-partition
(cat "Partitioning complete. Now insert the "
     "\"Amiga Install\" disk in a floppy drive and "
     "reset your system.\n\n"
     "Once the reset process complete, you must "
     "format the two new partitions. To do this, "
     "select the \"WB_2.x\" icon from Workbench, and "
     "pick the \"Icons/Format Disk...\" menu item. "
     "Repeat the same operation for the \"Work\" icon.\n\n"
     "Once formatting complete, you can install the "
     "Workbench 2.1 software on \"WB_2.x\" by starting "
     "the Install 2.1 program."
))

(set #cant-fit
(cat "\nCan't fit the new partitions on "
     "the hard drive because other "
     "partitions have used up all the "
     "space.\n\n"
     "Do you want to overwrite all the "
     "other partitions? This will loose "
     "all the information stored on these "
     "partitions."
))

(set #cant-fit-help
(cat "\nPartitioning a hard drive involves "
     "dividing it into separate sections. "
     "This program will divide your hard drive "
     "into two main sections: WB_2.x and Work. "
     "WB_2.x is where system files are stored, "
     "where Workbench files reside. Work is "
     "where you store your own files.\n\n"
))

(set #cant-fit-1
(cat "Overwrite"
))

(set #cant-fit-2
(cat "Cancel"
))

(set #reselect-on
(cat "\n\nReselection for all SCSI units will now be turned "
     "ON. Data stored on the hard drives will not be affected."
))

(set #reselect-off
(cat "\n\nReselection for all SCSI units will now be turned "
     "OFF. Data stored on the hard drives will not be affected."
))

(set #reselect-help
(cat "Reselection is a hardware feature that enables "
     "multiple SCSI or IDE devices connected to the same "
     "computer to coexist better together."
))

(set #reselect-1
(cat "Proceed"
))

(set #reselect-2
(cat "Cancel"
))

(set #reselect-on-ok
(cat "\nReselection is now turned on for all SCSI units. Please "
     "reset your Amiga for the change to take effect."
))

(set #reselect-off-ok
(cat "\nReselection is now turned off for all SCSI units. Please "
     "reset your Amiga for the change to take effect."
))

(set #confirm-sk
(cat "\n\nA new version of the SuperKickstart files will "
     "now be copied to your A3000 or A3000T hard drive."
))

(set #confirm-sk-help
(cat "\nThe SuperKickstart file is what lets an Amiga 3000 "
     "or 3000T operate. To install a new version, you will need "
     "a SuperKickstart floppy disk."
))

(set #confirm-sk-1
(cat "Proceed"
))

(set #confirm-sk-2
(cat "Cancel"
))

(set #sk-ok
(cat "\n\nThe new SuperKickstart file is now installed on your "
     "hard drive. Reset your Amiga by turning it off to use the "
     "new SuperKickstart."
))


;=============================================================================
; Spanish strings

(if (= @language "español")
(
(set #bad-kick
(cat "Para instalar Workbench2.1 necesita tener el Kickstart 2.04"
))

(set #bad-boot
(cat "Por favor, arranque con el disco \"Amiga Install\" versi¢n2.1 "
     "antes de ejecutar la utilidad de instalaci¢n del disco duro"
))

(set #introduction
(cat "\nHDSetup le permite ejecutar diversas tareas de configuraci¢n del "
     "disco duro. Para utilizar este programa necesita tener cualquiera "
     "de los siguientes sistemas:\n\n"
     "ù Controladora A590 \n"
     "ù Controladora A2091\n"
     "ù A600HD            \n"
     "ù A2000HD           \n"
     "ù A2500             \n"
     "ù A3000             \n"
     "ù A3000T            \n"
))

(set #what-to-do
(cat "\nPor favor, seleccione la operaci¢n a ejecutar\n"
))

(set #what-to-do-help
(cat "La opci¢n \"Particionar Disco Duro\" formatear  a "
     "bajo nivel su disco duro. La unidad ser  reparticionada "
     "como la configuraci¢n est ndar.\n\n "
     "Las opciones  \"Activar Reselecci¢n\" y "
     "\"Desactivar Reselecci¢n\" le permitir n controlar "
     "la reselecci¢n de todos sus dispositivos SCSI e "
     "IDE conectados al sistema.\n\n"
     "Por £ltimo, la opci¢n \"Actualizar SuperKickstar "
     " A3000/A3000T\" permite a los usuarios de ‚stos modelos "
     "actualizar su fichero SuperKickstart .\n\n"
     @askchoice-help
))

(set #what-to-do-1
(cat "Particionar Disco Duro"
))

(set #what-to-do-2
(cat "Activar Reselecci¢n"
))

(set #what-to-do-3
(cat "Desactivar Reselecci¢n"
))

(set #what-to-do-4
(cat "Actualizar SuperKickstart A3000/A3000T"
))

(set #ask-unit
(cat "\nEsta opci¢n formatear  su disco duro a bajo nivel. "
     "La unidad ser  reparticionada como "
     "la configuraci¢n est ndar.\n\n"
     "¨Qu‚ unidad de disco duro debe particionarse?\n\n"
     "Los sistemas Amiga con discos duros SCSI "
     "(A590, A2000HD, A2500, A3000) normalmente "
     "usan la unidad 6. Los sistemas Amiga con discos "
     "duros IDE (A600HD) usan normalmente la unidad 0."
))

(set #ask-unit-help
(cat "\nParticionar un disco duro implica "
     "dividirlo en partes separadas. "
     "Este programa dividir  su disco duro "
     "en dos secciones: WB_2.x y Work. "
     "En WB_2.x se guardar n los ficheros del "
     "sistema con los ficheros de Workbench. "
     "En Work podr  almacenar sus ficheros.\n\n"
     "Cada disco SCSI o IDE tiene un n£mero de "
     "unidad asociado. Este n£mero se controla "
     "normalmente con los jumpers que hay en el "
     "disco duro.\n\n"
     "Los sistemas Amiga con discos duros SCSI "
     "(A590, A2000HD, A2500, A3000) se sirven "
     "como unidad 6. Los sistemas con disco IDE (A600HD) "
     "utilizan el n£mero de unidad 0.\n\n"
))

(set #confirm-partition
(cat "\n\n¨Quiere particionar su unidad de disco duro %lu?\n\n"
     "!Se perder n todos los datos!"
))

(set #confirm-partition-help
(cat "\nParticionar un disco duro implica "
     "dividirlo en partes separadas. "
     "Este programa dividir  su disco duro "
     "en dos secciones: WB_2.x y Work. "
     "El WB_2.x se guardar n los ficheros del "
     "sistema con los ficheros de Workbench. "
     "En Work podr  almacenar sus ficheros.\n\n"
))

(set #confirm-partition-1
(cat "Continuar"
))

(set #confirm-partition-2
(cat "Cancelar"
))

(set #hw-failure
(cat "­Fallo en el proceso!\n\nChequee su hardware y vuelva a intentarlo."
))

(set #use-hdtoolbox
(cat "Necesitar  usar HDToolBox para "
     "crear particiones a su medida."
))

(set #complete-partition
(cat "Proceso terminado. Inserte el disco "
     "\"Amiga Install\" en la unidad de disco "
     "e inicialice su sistema.\n\n"
     "Despu‚s de inicializarlo, debe formatear "
     "las nuevas particiones. Para ello, "
     "seleccione el icono \"WB_2.x\" desde Workbench, "
     "y elija la opci¢n \"Icons/Format Disk...\". "
     "Repita la misma operaci¢n con \"Work\".\n\n"
     "Una vez formateadas, podr  instalar "
     "Workbench 2.1 en \"WB_2.x\" ejecutando "
     "el programa Install 2.1."
))

(set #cant-fit
(cat "\nLas nuevas particiones no caben "
     "en el disco duro ya que otras "
     "particiones han usado todo el "
     "espacio.\n\n"
     "¨Quiere sobreescribir todas las dem s "
     "particiones?. Esto har  que pierda toda "
     "la informaci¢n almacenada en estas "
     "particiones."
))

(set #cant-fit-help
(cat "\nParticionar un disco duro implica "
     "dividirlo en partes separadas. "
     "Este programa dividir  su disco duro "
     "en dos secciones: WB_2.x y Work. "
     "En WB_2.x se guardar n los ficheros, "
     "del sistema con los ficheros de Workbench. "
     "En Work podr  almacenar sus ficheros.\n\n"
))

(set #cant-fit-1
(cat "Sobreescribir"
))

(set #cant-fit-2
(cat "Cancelar"
))

(set #reselect-on
(cat "\n\nSe activar  la reselecci¢n de todas las unidades "
     "SCSI. Esto no afecta a los datos almacenados en la unidad."
))

(set #reselect-off
(cat "\n\nSe desactivar  la reselecci¢n de todas las unidades "
     "SCSI. Esto no afecta a los datos almacenados en la unidad."
))

(set #reselect-help
(cat "La reselecci¢n es una caracter¡stica hardware que permite "
     "conectar varias unidades SCSI o IDE al mismo ordenador. "
))

(set #reselect-1
(cat "Continuar"
))

(set #reselect-2
(cat "Cancelar"
))

(set #reselect-on-ok
(cat "\nReselecci¢n activada en todas las unidades SCSI. Por favor, "
     "reinicialice su Amiga para que tenga efecto el cambio."
))

(set #reselect-off-ok
(cat "\nReselecci¢n descativada en todas las unidades SCSI. Por "
     "favor, reinicialice su Amiga para que tenga efecto el cambio."
))

(set #confirm-sk
(cat "\n\nSe va a copiar la nueva versi¢n del fichero SuperKickstart "
     "al disco duro de su A3000 o A3000T."
))

(set #confirm-sk-help
(cat "\nEl fichero SuperKickstart permite funcionar a su Amiga 3000 "
     "o 3000T. Para instalar una nueva versi¢n, necesitar  un disco "
     "del SuperKickstart."
))

(set #confirm-sk-1
(cat "Continuar"
))

(set #confirm-sk-2
(cat "Cancelar"
))

(set #sk-ok
(cat "\n\nEl nuevo fichero SuperKickstart ya est  instalado en "
     "su disco duro. Apague su Amiga para utilizar el nuevo "
     "SuperKickstart."
))

))


;=============================================================================
; Portugues strings

(if (= @language "português")
(
(set #bad-kick
(cat "Tem que estar a usar o Kickstart 2.04 para instalar o Workbench 2.1"
))

(set #bad-boot
(cat "Por favor arranque com a diskette \"Amiga Install\" Versão 2.1 "
     "antes de executar este programa de configuração de disco rígido."
))

(set #introduction
(cat "\nO HDSetup permite-lhe fazer trabalhos de configuração no Disco Rígido. "
     "Terá que ter um destes componentes para poder utilizar este programa:\n\n"
     "· Controlador A590     \n"
     "· Controlador A2091    \n"
     "· Um sistema A600HD    \n"
     "· Um sistema A2000HD   \n"
     "· Um sistema A2500     \n"
     "· Um sistema A3000     \n"
     "· Um sistema A3000T    \n"
))

(set #what-to-do
(cat "\nPor favor escolha a operação a efectuar\n"
))

(set #what-to-do-help
(cat "A opção \"Particionar Disco Rígido\" vai "
     "formatar o seu disco a baixo nível. O disco "
     "será re-particionado para a configuração "
     "standard.\n\n"
     "As opções \"Ligar Reselecção\" e \"Desligar "
     "Reselecção\" permitem-lhe controlar a reselecção "
     "de todos os dispositivos SCSI e IDE ligados ao "
     "sistema.\n\n"
     "Finalmente, a opção \"Actualizar A3000/A3000T SuperKickstart\" "
     "permite aos possuidores de sistemas Amiga 3000 e 3000T actualizar "
     "os ficheiros SuperKickstart das suas máquinas.\n\n"
     @askchoice-help
))

(set #what-to-do-1
(cat "Particionar Disco Rígido"
))

(set #what-to-do-2
(cat "Ligar Reselecção"
))

(set #what-to-do-3
(cat "Desligar Reselecção"
))

(set #what-to-do-4
(cat "Actualizar A3000/A3000T SuperKickstart"
))

(set #ask-unit
(cat "\nO seu disco vai ser formatado a baixo nível. "
     "O disco será re-particionado para a configuração "
     "standard.\n\n"
     "Que unidade de disco será particionada?\n\n"
     "Sistemas Amiga com discos SCSI "
     "(A590, A2000HD, A2500 e A3000) normalmente "
     "usam a unidade 6. Sistemas Amiga com discos "
     "IDE (A600HD) usam normalmente a unidade 0."
))

(set #ask-unit-help
(cat "\nParticionar o disco rígido implica "
     "dividi-lo em várias partes. "
     "Este programa vai dividir o seu disco "
     "em duas partes: WB_2.x e Work. "
     "WB_2.x é onde os ficheiros de sistema e "
     "do Workbench residem. Work é onde "
     "vai pôr os seus ficheiros e programas.\n\n"
     "Cada disco SCSI ou IDE tem um número de "
     "unidade associado a ele. Este número é "
     "controlado por meio de 'jumpers' "
     "no próprio disco.\n\n"
     "Sistemas Amiga com discos SCSI "
     "(A590, A2000HD, A2500, A3000) utilizam a "
     "unidade 6 já de fábrica. Sistemas Amiga com "
     "discos IDE (A600HD) utilizam a unidade 0 já de fábrica.\n\n"
))

(set #confirm-partition
(cat "\n\nDeseja particionar o disco %lu ?\n\n"
     "Todos os dados serão perdidos..."
))

(set #confirm-partition-help
(cat "\nParticionar o disco rígido implica "
     "dividi-lo em várias partes. "
     "Este programa vai dividir o seu disco "
     "em duas partes: WB_2.x e Work. "
     "WB_2.x é onde os ficheiros de sistema e "
     "do Workbench residem. Work é onde "
     "vai pôr os seus ficheiros e programas.\n\n"
))

(set #confirm-partition-1
(cat "Prosseguir"
))

(set #confirm-partition-2
(cat "Cancelar"
))

(set #hw-failure
(cat "Processo falhado!\n\nVerifique o seu sistema e tente outra vez."
))

(set #use-hdtoolbox
(cat "Terá que usar o programa HDToolBox para "
     "fazer partições fora do standard do sistema."
))

(set #complete-partition
(cat "Particionamento está completo. Agora insira a "
     "diskette \"Amiga Install\" em qualquer drive "
     "e reinicialize o seu sistema.\n\n"
     "Uma vez completo o processo de reinicialização, terá "
     "que formatar as duas novas partições. Para isso basta, "
     "selecionar icone \"WB_2.x\" no Workbench, e "
     "escolher o menu \"Icons/Format Disk...\". "
     "Repita a mesma operação para o icone \"Work\".\n\n"
     "Depois da formatação completa, poderá instalar o "
     "Workbench 2.1 na partição \"WB_2.x\" executando o "
     "programa Install 2.1."
))

(set #cant-fit
(cat "\nAs novas partições não cabem no "
     "disco rígido devido a existirem "
     "outras que usaram todo o espaço "
     "disponível.\n\n"
     "Deseja apagar todas as outras "
     "partições? Esta operação vai apagar "
     "toda a informação guardada nelas. "
))

(set #cant-fit-help
(cat "\nParticionar o disco rígido implica "
     "dividi-lo em várias partes. "
     "Este programa vai dividir o seu disco "
     "em duas partes: WB_2.x e Work. "
     "WB_2.x é onde os ficheiros de sistema e "
     "do Workbench residem. Work é onde "
     "vai pôr os seus ficheiros e programas.\n\n"
))

(set #cant-fit-1
(cat "Reescrever"
))

(set #cant-fit-2
(cat "Cancelar"
))

(set #reselect-on
(cat "\n\nA reselecção para todas as unidades SCSI será ligada. "
     "Os dados gravados no(s) disco(s) rígido(s) não serão afectados."
))

(set #reselect-off
(cat "\n\nA reselecção para todas as unidades SCSI será desligada. "
     "Os dados gravados no(s) disco(s) rígido(s) não serão afectados."
))

(set #reselect-help
(cat "A Reselecção é uma carateristica do hardware que permite "
     "a coexistência de múltiplos aparelhos SCSI ou IDE ligados "
     "ao mesmo sistema."
))

(set #reselect-1
(cat "Prosseguir"
))

(set #reselect-2
(cat "Cancelar"
))

(set #reselect-on-ok
(cat "\nA reselecção está ligada para todas as unidades SCSI. Por "
     "favor reinicialize o seu Amiga para que a mudança tenha efeito."
))

(set #reselect-off-ok
(cat "\nA reselecção está desligada para todas as unidades SCSI. Por "
     "favor reinicialize o seu Amiga para que a mudança tenha efeito."
))

(set #confirm-sk
(cat "\n\nUma nova versão dos ficheiros do SuperKickstart será "
     "copiada para o disco do seu A3000 ou A3000T."
))

(set #confirm-sk-help
(cat "\nO ficheiro SuperKickstart é o que faz funcionar o Amiga 3000 "
     "ou 3000T. Para instalar uma nova versão vai precisar de uma "
     "diskette SuperKickstart."
))

(set #confirm-sk-1
(cat "Prosseguir"
))

(set #confirm-sk-2
(cat "Cancelar"
))

(set #sk-ok
(cat "\n\nO novo ficheiro SuperKickstart está instalado no seu "
     "disco rígido. Reinicialize o seu Amiga, desligando-o, para usar "
     "o novo SuperKickstart."
))

))


;=============================================================================
; French strings

(if (= @language "français")
(
(set #bad-kick
(cat "Il vous faut utiliser Kickstart 2.04 pour installer le Workbench 2.1"
))

(set #bad-boot
(cat "Veuillez démarrer votre Amiga à partir de la disquette "
     "\"Amiga Install\" version 2.1 avant de lancer ce programme"
))

(set #introduction
(cat "\nHDSetup vous permet de nombreuses possiblitées d'installation. "
     "Pour pouvoir utiliser ce programme, vous devez possédez un "
     "de ces materiels dont la liste suit:\n\n"
     "· A590    contrôleur de disque dur\n"
     "· A2091   contrôleur de disque dur\n"
     "· A600HD  Système Amiga           \n"
     "· A2000HD Système Amiga           \n"
     "· A2500   Système Amiga           \n"
     "· A3000   Système Amiga           \n"
     "· A3000T  Système Amiga           \n"
))

(set #what-to-do
(cat "\nVeuillez sélectionner l'opération à effectuer\n"
))

(set #what-to-do-help
(cat "La sélection \"Partitionnement du disque\" déclenchera un formatage "
     "de bas niveau. Le disque sera repartitionné dans la configuration "
     "standard.\n\n"
     "Les sélections \"Résélection: active \" et \"Résélection Inactive \" vous "
     "permet de contrôler la résélection de tous les périphériques SCSI et "
     "IDE connectés sur votre système.\n\n"
     "Enfin, la Mise à jour du superkickstart A3000/A3000T permet "
     "aux possesseurs d'Amiga 3000 ou 3000T,l'installation d'une "
     "nouvelle version du fichier SuperKickstart.\n\n "
     @askchoice-help
))

(set #what-to-do-1
(cat "Partitionnement du disque dur"
))

(set #what-to-do-2
(cat "Résélection: Active"
))

(set #what-to-do-3
(cat "Résélection: Inactive"
))

(set #what-to-do-4
(cat "Mise à jour du SuperKickstart A3000/A3000T"
))

(set #ask-unit
(cat "\nCeci déclenchera un formatage bas niveau de votre disque dur. "
     "Le disque sera repartitionné dans la configuration standard.\n\n"
     "Quelle unité de disque dur doit être partitionnée ?\n\n"
     "Les Amiga possèdant un disque SCSI "
     "(A590, A2000HD, A2500, A3000) utilisent la plupart du temps "
     "l'unité 6. Les Amiga possèdant un disque IDE (A600HD) "
     "utilisent plutôt l'unité 0."
))

(set #ask-unit-help
(cat "\nLe partitionnement d'un disque dur implique "
     "de le diviser en plusieurs sections séparées. "
     "Ce programme divisera votre disque dur "
     "en deux section principales: WB_2.x et Work. "
     "WB_2.x correspond à la partition où sont placés les fichiers du Workbench. "
     "Work est la partition où sont placés vos propres fichiers.\n\n"
     "Chaque disque dur SCSI ou IDE possède un numéro d'unité. "
     "Ce numéro est le plus souvent contrôlé par des cavaliers se trouvant "
     "sur le disque dur.\n\n"
     "Les Amiga possèdant un disque dur SCSI "
     "(A590, A2000HD, A2500, A3000) sont livrés "
     "en unité 6. Les Amiga possèdant un disque dur IDE (A600HD) "
     "sont livrés en unité 0.\n\n"
))

(set #confirm-partition
(cat "\n\nEtes-vous sûr de vouloir partitionner le disque dur\n"
     "se trouvant sur l'unité %lu ?\n\n"
     "Toutes les informations de ce disque dur seront perdues !"
))

(set #confirm-partition-help
(cat "\nLe partitionnement d'un disque dur implique "
     "de le diviser en plusieurs sections séparées. "
     "Ce programme divisera votre disque dur "
     "en deux section principales: WB_2.x et Work. "
     "WB_2.x correspond à la partition où sont placés les fichiers du Workbench. "
     "Work est la partition où sont placés vos propres fichiers.\n\n"
))

(set #confirm-partition-1
(cat "OK"
))

(set #confirm-partition-2
(cat "Annuler"
))

(set #hw-failure
(cat "La procédure a échoué !\n\nVérifiez votre matériel et recommencez."
))

(set #use-hdtoolbox
(cat "Vous aurez besoin d'utiliser HDToolBox pour faire "
     "un partitionnement non standard "
))

(set #complete-partition
(cat "Le partitionnement est fini. Vous devez maintenant insérer la disquette "
     "\"Amiga Install\" dans un lecteur et ensuite réinitialiser votre système.\n\n"
     "Une fois que le système sera de nouveau opérationnel, vous devrez "
     "formater les deux nouvelles partitions. Pour cela, "
     "selectionnez l'icône \"WB_2.x\" sur l'écran du Workbench, et "
     "cliquez sur le menu déroulant \"Icons/Format Disk...\". "
     "Répetez la même opération pour l'icône \"Work\".\n\n"
     "Une fois que le formatage sera fini, vous pourrez installer le "
     "Workbench 2.1 sur la partition \"WB_2.x\" en utilisant le programme "
     "the Install 2.1."
))

(set #cant-fit
(cat "\nIl est impossible de placer cette nouvelle partition "
     "sur le disque dur parce que les autres "
     "partitions utilisent déjà tout l'espace du disque.\n\n "
     "Voulez-vous écrire sur toutes les autres partitions ? "
     "Dans ce cas, toutes les informations stockées sur ces partitions "
     "seront perdues."
))

(set #cant-fit-help
(cat "\nLe partitionnement d'un disque dur implique "
     "de le diviser en plusieurs sections séparées. "
     "Ce programme divisera votre disque dur "
     "en deux section principales: WB_2.x et Work. "
     "WB_2.x correspond à la partition où sont placés les fichiers du Workbench. "
     "Work est la partition où sont placés vos propres fichiers.\n\n"
))

(set #cant-fit-1
(cat "Ecrire"
))

(set #cant-fit-2
(cat "Annuler"
))

(set #reselect-on
(cat "\n\nLa résélection pour toutes les unités SCSI va maintenant être utilisée. "
     "Les informations stockées sur ces disques durs n'en seront pas affectées. "
))

(set #reselect-off
(cat "\n\nLa résélection pour toutes les unités SCSI va maintenant être supprimée. "
     "Les informations stockées sur ces disques durs n'en seront pas affectées. "
))

(set #reselect-help
(cat "La résélection est une option qui permet l'utilisation optimale "
     "de périphériques SCSI ou IDE multiples, connectés sur le même "
     "ordinateur. Elle permet une meilleure coexistance entre eux. "
))

(set #reselect-1
(cat "OK"
))

(set #reselect-2
(cat "Annuler"
))

(set #reselect-on-ok
(cat "\nLa résélection est maintenant utilisée pour toutes les unités SCSI. Veuillez "
     "réinitialiser votre Amiga pour que ce changement soit pris en compte. "
))

(set #reselect-off-ok
(cat "\nLa résélection est maintenant supprimée pour toutes les unités SCSI. Veuillez "
     "réinitialiser votre Amiga pour que ce changement soit pris en compte. "
))

(set #confirm-sk
(cat "\n\nUne nouvelle version du fichier SuperKickstart va être maintenant "
     "mis sur le disque dur de votre A3000 ou A3000T."
))

(set #confirm-sk-help
(cat "\nLe fichier SuperKickstart est un fichier qui permet à un Amiga "
     " 3000 ou 3000T de fonctionner. \n"
     "Pour installer une nouvelle version de ce fichier, vous aurez besoin de la disquette "
     "SuperKickstart."
))

(set #confirm-sk-1
(cat "Continuer"
))

(set #confirm-sk-2
(cat "Annuler"
))

(set #sk-ok
(cat "\n\nLe nouveau fichier SuperKickstart est maintenant installé sur "
     "votre disque dur. Réinitialisez votre Amiga "
     "(par le bouton Marche/Arrêt) pour pouvoir utiliser ce nouveau "
     "SuperKickstart."
))

))


;=============================================================================
; German strings

(if (= @language "deutsch")
(
(set #bad-kick
(cat "Sie müssen Kickstart 2.04 zum Installieren von Workbench 2.1 benutzen."
))

(set #bad-boot
(cat "Bitte starten Sie neu mit der Diskette \"Amiga Install\" Version 2.1, "
     "bevor Sie dieses Installationsprogramm starten."
))

(set #introduction
(cat "\nMit HDSetup können Sie verschiedene Konfigurationsarbeiten an "
     "Ihrer Festplatte vornehmen. Damit Sie es benutzen können, müssen "
     "Sie eine der folgenden Hardwarekomponenten besitzen:\n\n"
     "· A590    Festplattencontroller\n"
     "· A2091   Festplattencontroller\n"
     "· A600HD  Amiga-System         \n"
     "· A2000HD Amiga-System         \n"
     "· A2500   Amiga-System         \n"
     "· A3000   Amiga-System         \n"
     "· A3000T  Amiga-System         \n"
))

(set #what-to-do
(cat "\nBitte wählen Sie eine Operation\n"
))

(set #what-to-do-help
(cat "Mit der Auswahl \"Festplatte partitionieren\" formatieren Sie "
     "Ihre Festplatte physisch (\"low-level\"). Die Festplatte wird dann "
     "automatisch auf die standardmäßige Konfiguration neu "
     "partitioniert.\n\n"
     "Mit \"Reselection Ein\" bzw. \"Reselection Aus\" wählen Sie für "
     "alle ans System angeschlossenen SCSI- und IDE-Geräte, ob bei "
     "ihnen die \"Wiederauswahl\" ausgenutzt werden soll.\n\n"
     "Schließlich können mit \"A3000/A3000T Superkickstart "
     "aktualisieren\" Besitzer eines Amiga 3000 oder A3000T die "
     "SuperKickstart-Datei ihrer Maschine aktualisieren.\n\n"
     @askchoice-help
))

(set #what-to-do-1
(cat "Festplatte partitionieren"
))

(set #what-to-do-2
(cat "Reselection Ein"
))

(set #what-to-do-3
(cat "Reselection Aus"
))

(set #what-to-do-4
(cat "A3000/A3000T SuperKickstart aktualisieren"
))

(set #ask-unit
(cat "Hiermit wird Ihre Festplatte physisch formatiert. "
     "Sie wird dann auf die Standardkonfiguration neu partitioniert.\n\n"
     "Welches Laufwerk soll partitioniert werden?\n"
     "Amiga-Systeme mit SCSI-Festplatten (A590, A2000HD, A2500, A3000) "
     "verwenden normalerweise \"Unit\" (Einheitennummer) 6. "
     "Amiga-Systeme mit "
     "IDE-Festplatten (A600HD) verwenden normalerweise \"Unit\" 0."
))

(set #ask-unit-help
(cat "\nDas Partitionieren einer Festplatte bedeutet ihre Unterteilung "
     "in unabhängige Teilbereiche. Dieses Programm teilt Ihre Festplatte "
     "in zwei Partitionen auf: WB_2.x und Work (Arbeit). "
     "Auf WB_2.x werden alle Systemdateien gespeichert, also die "
     "Workbench-Dateien. Auf Work speichern Sie dann Ihre eigenen "
     "Dateien.\n\n"
     "Jede SCSI- oder IDE-Festplatte hat eine eigene "
     "\"Unit(Einheiten)\"-Nummer. Die kann man in der Regel über "
     "Jumper am Laufwerk einstellen.\n\n"
     "Amiga-Systeme mit SCSI-Festplatten (A590, A2000HD, A2500, A3000) "
     "werden mit Unit-Nummer 6 ausgeliefert. Amiga-Systeme mit "
     "IDE-Festplatten (A600HD) werden mit Unit-Nummer 0 ausgeliefert.\n\n"
))

(set #confirm-partition
(cat "\n\nWollen Sie Ihre Festplatte mit Unit-Nummer %lu "
     "partitionieren?\n\n"
     "Alle auf der Festplatte gespeicherten Daten gehen dabei "
     "verloren!"
))

(set #confirm-partition-help
(cat "\nDas Partitionieren einer Festplatte bedeutet ihre Unterteilung "
     "in unabhängige Teilbereiche. Dieses Programm teilt Ihre Festplatte "
     "in zwei Partitionen auf: WB_2.x und Work (Arbeit). "
     "Auf WB_2.x werden alle Systemdateien gespeichert, also die "
     "Workbench-Dateien. Auf Work speichern Sie dann Ihre eigenen "
     "Dateien.\n\n"
))

(set #confirm-partition-1
(cat "Weiter"
))

(set #confirm-partition-2
(cat "Abbrechen"
))

(set #hw-failure
(cat "Operation fehlgeschlagen!\n\nÜberprüfen Sie die Hardware "
     "und versuchen Sie es nocheinmal."
))

(set #use-hdtoolbox
(cat "Sie müssen das Programm HDToolBox benutzen, um eine "
     "Partitionierung nach Ihren individuellen Wünschen vorzunehmen."
))

(set #complete-partition
(cat "Partitionierung abgeschlossen. Legen Sie jetzt bitte die Diskette "
     "\"Amiga Install\" in ein Diskettenlaufwerk und starten Sie Ihr "
     "System neu.\n\n"
     "Wenn der Neustart abgeschlossen ist, müssen Sie die beiden neu "
     "angelegten Partitionen noch formatieren. Klicken Sie dazu einmal "
     "auf das Piktogramm \"WB_2.x\" auf der Workbench und wählen dann "
     "den Menüpunkt \"Icons/Format Disk...\". "
     "Wiederholen Sie diesen ganzen Vorgang mit dem Piktogramm "
     "\"Work\".\n\n"
     "Nach Abschluß der Formatierung können Sie die Workbench-2.1-Software "
     "auf \"WB_2.x\" installieren, indem Sie das Programm \"Install 2.1\" "
     "aufrufen."
))

(set #cant-fit
(cat "\nDie neuen Partitionen passen nicht auf die Festplatte, "
     "da andere Partitionen schon allen Platz belegen.\n\n"
     "Wollen Sie alle diese anderen Partitionen überschreiben? "
     "Damit würden Sie alle Informationen verlieren, die auf "
     "diesen Partitionen gespeichert sind."
))

(set #cant-fit-help
(cat "\nDas Partitionieren einer Festplatte bedeutet ihre Unterteilung "
     "in unabhängige Teilbereiche. Dieses Programm teilt Ihre Festplatte "
     "in zwei Partitionen auf: WB_2.x und Work (Arbeit). "
     "Auf WB_2.x werden alle Systemdateien gespeichert, also die "
     "Workbench-Dateien. Auf Work speichern Sie dann Ihre eigenen "
     "Dateien.\n\n"
))

(set #cant-fit-1
(cat "Überschreiben"
))

(set #cant-fit-2
(cat "Abbrechen"
))

(set #reselect-on
(cat "\n\nReselection (Wiederauswahl) wird jetzt für alle "
     "SCSI-Laufwerke EINgeschaltet. Die auf diesen Festplatten "
     "gespeicherten Daten werden davon nicht berührt."
))

(set #reselect-off
(cat "\n\nReselection (Wiederauswahl) wird jetzt für alle "
     "SCSI-Laufwerke AUSgeschaltet. Die auf diesen Festplatten "
     "gespeicherten Daten werden davon nicht berührt."
))

(set #reselect-help
(cat "Reselection (Wiederauswahl) ist ein Verfahren, mit dem "
     "mehrere SCSI- oder IDE-Laufwerke, die an denselben Computer "
     "angeschlossen sind, effektiver gleichzeitig arbeiten können."
))

(set #reselect-1
(cat "Weiter"
))

(set #reselect-2
(cat "Abbrechen"
))

(set #reselect-on-ok
(cat "\n\nReselection (Wiederauswahl) ist jetzt für alle "
     "SCSI-Laufwerke eingeschaltet. Bitte starten Sie Ihren Amiga "
     "neu, damit diese Änderung wirksam wird."
))

(set #reselect-off-ok
(cat "\n\nReselection (Wiederauswahl) ist jetzt für alle "
     "SCSI-Laufwerke ausgeschaltet. Bitte starten Sie Ihren Amiga "
     "neu, damit diese Änderung wirksam wird."
))

(set #confirm-sk
(cat "\n\nEine neue Version der SuperKickstart-Dateien wird "
     "jetzt auf die Festplatte Ihres A3000 bzw. A3000T gespeichert."
))

(set #confirm-sk-help
(cat "\nDie SuperKickstart-Datei braucht ein Amiga 3000 bzw. 3000T "
     "notwendig zum Arbeiten. Um eine neue Version zu installieren, "
     "benötigen Sie eine SuperKickstart-Diskette."
))

(set #confirm-sk-1
(cat "Weiter"
))

(set #confirm-sk-2
(cat "Abbrechen"
))

(set #sk-ok
(cat "\n\nDie neue SuperKickstart-Datei ist jetzt auf Ihrer Festplatte "
     "installiert. Starten Sie Ihren Amiga neu, indem Sie ihn ganz "
     "ausschalten, damit anschließend der neue SuperKickstart aktiviert "
     "werden kann."
))

))


;=============================================================================
; Dutch strings

(if (= @language "nederlands")
(
(set #bad-kick
(cat "U moet Kickstart 2.04 gebruiken om Workbench 2.1 te installeren"
))

(set #bad-boot
(cat "Start a.u.b. uw systeem op met de \"Amiga Install\" diskette "
     "Versie 2.1 voordat u dit installatie programma opstart."
))

(set #introduction
(cat "\nHDSetup bied u de mogelijkheid om verschillende harddisk "
     "installatie procedures uit te voeren. Dit programma werkt "
     "alleen als u een van de volgende harddisk configuraties in "
     "uw bezit heeft:\n\n"
     "· A590    harddisk controller\n"
     "· A2091   harddisk controller\n"
     "· A600HD  Amiga systeem      \n"
     "· A2000HD Amiga systeem      \n"
     "· A2500   Amiga systeem      \n"
     "· A3000   Amiga systeem      \n"
     "· A3000T  Amiga systeem      \n"
))

(set #what-to-do
(cat "\nSelecteer a.u.b. welke procedure er uitgevoerd moet "
     "worden.\n"
))

(set #what-to-do-help
(cat "De selectie \"Harddisk partitioneren\" zal "
     "uw harddisk low-level formatteren. De "
     "disk zal opnieuw ingedeeld worden volgens "
     "de standaard configuratie.\n\n"
     "De selectie \"Reselectie Aan\" en \"Reselectie Uit\" "
     "geeft u de mogelijkheid om van alle SCSI of "
     "IDE disks in het systeem de reselectie aan of uit te zetten.\n\n"
     "De selectie \"Update A3000/A3000T SuperKickstart\" "
     "laat de A3000 en A3000T eigenaars hun machines "
     "voorzien van een nieuwe SuperKickstart.\n\n\n"
     @askchoice-help
))

(set #what-to-do-1
(cat "Harddisk Partitioneren"
))

(set #what-to-do-2
(cat "Reselectie Aan"
))

(set #what-to-do-3
(cat "Reselectie Uit"
))

(set #what-to-do-4
(cat "Update A3000/A3000T SuperKickstart"
))

(set #ask-unit
(cat "\nDeze procedure zal de harddisk low-level formatteren. "
     "De disk zal ingedeeld worden volgens de standaard "
     "configuratie.\n\n"
     "Welke harddisk eenheid moet gepartitioneerd worden?\n\n"
     "Amiga systemen met SCSI harddisken "
     "(A590, A2000HD, A2500, A3000) gebruiken normaliter "
     "eenheid 6. Amiga systemen met een IDE harddisk (A600HD) "
     "gebruiken normaliter eenheid 0."
))

(set #ask-unit-help
(cat "\nBij het partitioneren van een harddisk "
     "wordt deze in meerdere delen opgesplist. "
     "Dit programma zal uw harddisk opsplitsen in "
     "twee delen: WB_2.x en Work. "
     "Op WB_2.x worden systeem bestanden opgeslagen. "
     "Work kunt u gebruiken voor uw eigen bestanden. "
     "Elke SCSI of IDE harddisk heeft een eigen eenheid "
     "nummer. Dit number wordt doorgaans ingesteld met "
     "behulp van jumpers die zich op de harddisk bevinden.\n\n"
     "Amiga systemen met SCSI harddisken "
     "(A590, A2000HD, A2500, A3000) gebruiken normaliter "
     "eenheid 6. Amiga systemen met een IDE harddisk (A600HD) "
     "gebruiken normaliter eenheid 0."
))

(set #confirm-partition
(cat "\n\nWilt u harddisk eenheid %lu partitioneren?\n\n"
     "Alle data op de harddisk zal verloren gaan!"
))

(set #confirm-partition-help
(cat "\nBij het partitioneren van een harddisk "
     "wordt deze in meerdere delen opgesplist. "
     "Dit programma zal uw harddisk opsplitsen in "
     "twee delen: WB_2.x en Work. "
     "Op WB_2.x worden systeem bestanden opgeslagen."
     "Work kunt u gebruiken voor uw eigen bestanden.\n\n"
))

(set #confirm-partition-1
(cat "Doorgaan"
))

(set #confirm-partition-2
(cat "Annuleer"
))

(set #hw-failure
(cat "Procedure mislukt!\n\nControleer uw hardware en probeer "
     "het nog eens."
))

(set #use-hdtoolbox
(cat "Voor een afwijkende partitie indeling zult u "
     "HDToolBox moeten gebruiken."
))

(set #complete-partition
(cat "Partitioneren voltooid. Plaats nu de \"Amiga Install\" "
     "diskette in een diskette-eenheid en herstart uw systeem.\n\n"
     "Als het systeem opnieuw gestart is moet u de twee nieuwe "
     "partities formatteren. Hierbij gaat u alsvolgt te werk, "
     "selecteer het \"WB_2.x\" ikoon vanuit de Workbench, en "
     "kies voor de menu optie \"Icons/Format Disk...\". "
     "Herhaal deze zelfde handeling voor het \"Work\" ikoon.\n\n"
     "Als het formatteren voltooid is, kunt u de Workbench 2.1 "
     "software op \"WB_2.x\" installeren door het programma "
     "Install 2.1 te starten."
))

(set #cant-fit
(cat "\nHet is niet mogelijk om de nieuwe partities "
     "op de harddisk aan te maken omdat andere "
     "partities alle beschikbare schijfruimte hebben "
     "gereseveerd space.\n\n"
     "Wilt u alle bestaande partities overschrijven? "
     "Hierdoor zal alle op deze partities aanwezige "
     "informatie verloren gaan."
))

(set #cant-fit-help
(cat "\nBij het partitioneren van een harddisk "
     "wordt deze in meerdere delen opgesplist. "
     "Dit programma zal uw harddisk opsplitsen in "
     "twee delen: WB_2.x en Work. "
     "Op WB_2.x worden systeem bestanden opgeslagen. "
     "Work kunt u gebruiken voor uw eigen bestanden. "
))

(set #cant-fit-1
(cat "Overschrijven"
))

(set #cant-fit-2
(cat "Annuleer"
))

(set #reselect-on
(cat "\n\nReselectie van alle SCSI eenheden zal nu aangezet "
     "worden. De op de eenheden aanwezige informatie zal niet "
     "beinvloed worden."
))

(set #reselect-off
(cat "\n\nReselectie van alle SCSI eenheden zal nu uitgezet "
     "worden. De op de eenheden aanwezige informatie zal niet "
     "beinvloed worden."
))

(set #reselect-help
(cat "Reselectie is een hardware instelling waardoor meerdere "
     "SCSI of IDE eenheden, welke op de zelfde computer aangesloten "
     "zijn, beter kunnen functioneren."
))

(set #reselect-1
(cat "Doorgaan"
))

(set #reselect-2
(cat "Annuleer"
))

(set #reselect-on-ok
(cat "\nDe reselectie van alle SCSI eenheden is nu aangezet. "
     "Herstart a.u.b. uw Amiga om de veranderingen "
     "effectief te maken."
))

(set #reselect-off-ok
(cat "\nDe reselectie van alle SCSI eenheden in nu uitgezet. "
     "Herstart a.u.b. uw Amiga om de veranderingen "
     "effectief te maken."
))

(set #confirm-sk
(cat "\n\nEen nieuwe versie van de SuperKickstart zal nu "
     "naar de harddisk van uw A3000 of A3000T gecopïeerd "
     "worden."
))

(set #confirm-sk-help
(cat "\nDe SuperKickstart is nodig om een Amiga 3000 "
     "of 3000T te laten functioneren. Om de nieuwe versie "
     "te installeren heeft u een SuperKickstart diskette "
     "nodig."
))

(set #confirm-sk-1
(cat "Doorgaan"
))

(set #confirm-sk-2
(cat "Annuleer"
))

(set #sk-ok
(cat "\n\nDe nieuwe SuperKickstart is nu geïnstalleerd op uw "
     "harddisk. Herstart uw Amiga, door deze uit en vervolgens "
     "weer aan te zetten, om gebruik te maken van deze nieuwe "
     "SuperKickstart."
))

))


;=============================================================================
; Italian strings

(if (= @language "italiano")
(
(set #bad-kick
(cat "E' necessario il Kickstart 2.04 per installare il Workbench 2.1!"
))

(set #bad-boot
(cat "Ripartire dal dischetto \"Amiga Install\" Versione 2.1 "
     "prima di avviare questo programma di installazione."
))

(set #introduction
(cat "\nHDSetup vi permette di impostare per l'uso vari dischi fissi. "
     "Per poter utilizzare questo programma dovrete possedere uno dei "
     "seguenti componenti hardware:\n\n"
     "· A590    controller per disco fisso\n"
     "· A2091   controller per disco fisso\n"
     "· A600HD  Sistema Amiga             \n"
     "· A2000HD Sistema Amiga             \n"
     "· A2500   Sistema Amiga             \n"
     "· A3000   Sistema Amiga             \n"
     "· A3000T  Sistema Amiga             \n"
))

(set #what-to-do
(cat "\nSelezionare l'operazione da eseguire\n"
))

(set #what-to-do-help
(cat "Il pulsante \"Partizione disco fisso\" esegue "
     "una formattazione a basso livello. Il disco "
     "verrà ri-partizionato secondo l'impostazione "
     "di configurazione standard.\n\n"
     "I pulsanti \"Riselezione attiva\" e \"Senza Riselezione\" "
     "permettono di controllare il modo di riselezione di tutti "
     "i dispositivi SCSI e IDE connessi al sistema.\n\n"
     "Per ultimo, il pulsante \"Aggiornamento SuperKickstart\" "
     "permette di aggiornare il file del SuperKickstart "
     "degli A3000 e degli A3000 Tower.\n\n"
     @askchoice-help
))

(set #what-to-do-1
(cat "Partizione disco fisso"
))

(set #what-to-do-2
(cat "Riselezione attiva"
))

(set #what-to-do-3
(cat "Senza riselezione"
))

(set #what-to-do-4
(cat "Aggiornamento SuperKickstart"
))

(set #ask-unit
(cat "\nQuesto formatta a basso livello il disco fisso. "
     "Il disco verrà ri-partizionato secondo l'impostazione "
     "di configurazione standard.\n\n"
     "Nei sistemi Amiga con dischi fissi SCSI "
     "(A590, A2000HD, A2500, A3000) normalmente "
     "si usa l'unità 6. Nei sistemi Amiga con dischi "
     "fissi IDE (A600HD) normalmente si usa l'unità 0.\n\n"
     "Quale unità deve essere partizionata?"
))

(set #ask-unit-help
(cat "\nPartizionare un disco fisso implica "
     "la sua divisione in sezioni separate. "
     "Questo programma divide il vostro disco "
     "in due sezioni principali: WB_2.x e Work. "
     "In WB_2.x vengono messi i file di sistema, "
     "dove risiede il Workbench. In Work vanno "
     "posizionati i file dell'utente.\n\n"
     "Sia i dischi fissi SCSI che IDE hanno "
     "un numero di unità associato. Questo "
     "numero è definito tipicamente da ponticelli "
     "presenti sul disco fisso.\n\n"
     "I sistemi Amiga con dischi fissi SCSI "
     "(A590, A2000HD, A2500, A3000) sono impostati "
     "sull'unità 6. I sistemi Amiga con dischi "
     "fissi IDE (A600HD) sono impostati sull'unità 0.\n\n"
))

(set #confirm-partition
(cat "\n\nVolete partizionare il disco fisso con unità %lu ?\n\n"
     "Tutti i dati sul disco fisso andranno persi!"
))

(set #confirm-partition-help
(cat "\nPartizionare un disco fisso implica "
     "la sua divisione in sezioni separate. "
     "Questo programma divide il vostro disco "
     "in due sezioni principali: WB_2.x e Work. "
     "In WB_2.x vengono messi i file di sistema, "
     "dove risiede il Workbench. In Work vanno "
     "posizionati i file dell'utente.\n\n"
))

(set #confirm-partition-1
(cat "Procedi"
))

(set #confirm-partition-2
(cat "Annulla"
))

(set #hw-failure
(cat "Procedura fallita!\n\nControllare l'hardware e riprovare."
))

(set #use-hdtoolbox
(cat "Dovete usare HDToolBox per fare "
     "delle partizioni personalizzate."
))

(set #complete-partition
(cat "Partizioni complete. Inserire il disco "
     "\"Amiga Install\" in una unità a dischi "
     "e riavviare il sistema.\n\n"
     "Completato il processo di riavvio, dovrete "
     "formattare le due nuove partizioni. Per fare ciò, "
     "attivare l'icona \"WB_2.x\" dal Workbench, e "
     "scegliere \"Icons/Format Disk...\" dal menu. "
     "Ripetere la stessa operazione per l'icona \"Work\".\n\n"
     "A formattazione completata, potete installare il "
     "software Workbench 2.1 sul \"WB_2.x\" facendo "
     "partire il programma Install 2.1."
))

(set #cant-fit
(cat "\nNon si possono inserire le nuove "
     "partizioni sul disco fisso in quanto "
     "tutto lo spazio disponibile è già "
     "utilizzato da altre partizioni.\n\n"
     "Volete sovrascrivere le altre "
     "partizioni? Tutte le informazioni "
     "salvate su queste partizioni "
     "andranno perse. "
))

(set #cant-fit-help
(cat "\nPartizionare un disco fisso implica "
     "la sua divisione in sezioni separate. "
     "Questo programma divide il vostro disco "
     "in due sezioni principali: WB_2.x e Work. "
     "In WB_2.x vengono messi i file di sistema, "
     "dove risiede il Workbench. In Work vanno "
     "posizionati i file dell'utente.\n\n"
))

(set #cant-fit-1
(cat "Sovrascrivi"
))

(set #cant-fit-2
(cat "Annulla"
))

(set #reselect-on
(cat "\n\nLa riselezione per tutte le unità SCSI è attiva. I dati "
     "memorizzati sui dischi fissi non vengono modificati."
))

(set #reselect-off
(cat "\n\nLa riselezione per tutte le unità SCSI è disattivata. "
     "I dati memorizzati sui dischi fissi non vengono modificati."
))

(set #reselect-help
(cat "La riselezione è una caratteristica hardware che "
     "permette il migliore utilizzo di più dispositivi "
     "SCSI o IDE connessi ad uno stesso computer."
))

(set #reselect-1
(cat "Procedi"
))

(set #reselect-2
(cat "Annulla"
))

(set #reselect-on-ok
(cat "\nLa riselezione è attiva per tutte le unità SCSI. "
     "Riavviare Amiga perchè le modifiche abbiano effetto."
))

(set #reselect-off-ok
(cat "\nLa riselezione è disattivata per tutte le unità SCSI. "
     "Riavviare Amiga perchè le modifiche abbiano effetto."
))

(set #confirm-sk
(cat "\n\nUna nuova versione di SuperKickstart verrà "
     "copiata nel disco fisso del vostro A3000 o A3000T."
))

(set #confirm-sk-help
(cat "\nIl file SuperKickstart è quello che permette ad Amiga 3000 "
     "o 3000T di funzionare. Per installare una nuova versione, è "
     "necessario il dischetto SuperKickstart."
))

(set #confirm-sk-1
(cat "Procedi"
))

(set #confirm-sk-2
(cat "Annulla"
))

(set #sk-ok
(cat "\n\nIl nuovo file SuperKickstart è stato installato sul "
     "vostro disco fisso. Riavviare Amiga, spegnendo e riaccendendo, "
     "per usare il nuovo SuperKickstart."
))

))


;=============================================================================
; Danish strings

(if (= @language "dansk")
(
(set #bad-kick
(cat "De skal benytte Kickstart 2.04 ved installation af Workbench 2.1"
))

(set #bad-boot
(cat "Vær venlig at boote fra \"Amiga Install\" disken Version 2.1 "
     "før De afvikler dette installations program"
))

(set #introduction
(cat "\nMed HDSetup kan De udføre forskellige harddisk op- sætninger. Det er "
     "nødvendigt at De har monteret een af de  følgende enheder for at kunne "
     "bruge dette program:\n\n"
     "· A590    harddisk controller\n"
     "· A2091   harddisk controller\n"
     "· A600HD  Amiga system       \n"
     "· A2000HD Amiga system       \n"
     "· A2500   Amiga system       \n"
     "· A3000   Amiga system       \n"
     "· A3000T  Amiga system       \n"
))

(set #what-to-do
(cat "\nVælg den ønskede operation.\n"
))

(set #what-to-do-help
(cat "Valget \"Partitionering af harddisk\" vil formatere "
     "Deres harddisk på laveste niveau. Drevet "
     "vil blive opdelt til standard "
     "konfigurationen.\n\n"
     "Valgene \"Aktivere Reselection\" og \"Deaktivere "
     "Reselection\" giver Dem mulighed for at "
     "kontrollere reselection af alle SCSI og IDE enheder "
     "tilsluttet systemet.\n\n"
     "Endelig giver valget \"Opdatere A3000/A3000T SuperKickstart\" "
     "Amiga 3000 og 3000T ejere mulighed for at opgradere "
     "SuperKickstart filen på deres maskine.\n\n"
     @askchoice-help
))

(set #what-to-do-1
(cat "Partitionering af harddisk"
))

(set #what-to-do-2
(cat "Aktivere Reselection"
))

(set #what-to-do-3
(cat "Deaktivere Reselection"
))

(set #what-to-do-4
(cat "Opdatere A3000/A3000T SuperKickstart"
))

(set #ask-unit
(cat "Dette vil formatere Deres harddisk. "
     "Drevet ompartitioneres til standard konfigurationen.\n\n"
     "Hvilket drev ønsker De partioneret?\n\n"
     "Amiga systemer med SCSI harddiske (A590, A2000HD, "
     "A2500, A3000) anvender normalt enhed (unit) 6. "
     "\nAmiga systemer med IDE harddiske (A600HD) anvender normalt "
     "enhed (unit) 0."
))

(set #ask-unit-help
(cat "\nPartitionering af en harddisk betyder "
     "opdeling i forskellige sektioner. "
     "Dette program vil dele Deres harddisk i "
     "to hoveddele: WB_2.x og Work. "
     "Systemfilerne gemmes i WB_2.x. "
     "Det er her Workbench befinder sig. På Work "
     "gemmer De Deres egne filer.\n\n"
     "Hver SCSI eller IDE harddisk har et "
     "enheds- eller apparatnummer. Dette "
     "nummer vælges typisk med jumpere på "
     "harddisken.\n\n"
     "Amiga systemer med SCSI harddiske "
     "(A590, A2000HD, A2500, A3000) klargøres normalt som "
     "enhed nummer 6. Amiga systemer med IDE "
     "harddiske (A600HD) klargøres som enhed nummer 0.\n\n"
))

(set #confirm-partition
(cat "\n\nØnsker De at partitionere Deres harddisk enhed %lu ?\n\n"
     "Alle data på harddisken vil gå tabt!"
))

(set #confirm-partition-help
(cat "\nPartitionering af en harddisk betyder "
     "opdeling i forskellige sektioner. "
     "Dette program vil dele Deres harddisk i "
     "to hoveddele: WB_2.x og Work. "
     "Systemfilerne gemmes i WB_2.x. "
     "Det er her Workbench befinder sig. På Work "
     "gemmer De Deres egne filer.\n\n"
))

(set #confirm-partition-1
(cat "Fortsætte"
))

(set #confirm-partition-2
(cat "Afbryde"
))

(set #hw-failure
(cat "Kan ikke fortsætte!\n\nCheck Deres hardware og prøv igen."
))

(set #use-hdtoolbox
(cat "Hvis De ønsker selv at bestemme partitionernes "
     "størrelse skal De benytte HDToolBox programmet."
))

(set #complete-partition
(cat "Partitioneringen er nu færdig. Nu skal De indsætte "
     "\"Amiga Install\" disken i et floppy drev og "
     "slukke/tænde Deres Amiga.\n\n"
     "Når reset processen er færdig, skal De formatere "
     "de to nye partitioner. Dette gør De ved at vælge "
     "\"WB_2.x\" ikonet fra Workbench, og "
     "så vælge \"Icons/Format Disk...\" i menuen. "
     "Gentag den samme operation for \"Work\" ikonet.\n\n"
     "Når formateringen er tilendebragt, kan De installere "
     "Workbench 2.1 softwaren på \"WB_2.x\" ved at starte "
     "Install 2.1 programmet."
))

(set #cant-fit
(cat "\nDe nye partitioner kan ikke være på "
     "Deres harddisk fordi andre "
     "partitioner har brugt al pladsen.\n\n"
     "Ønsker De at overskrive alle de andre "
     "partitioner? Derved vil al information "
     "gemt på disse partitioner gå tabt!"
))

(set #cant-fit-help
(cat "\nPartitionering af en harddisk betyder "
     "opdeling i forskellige sektioner. "
     "Dette program vil dele Deres harddisk "
     "i to hoveddele: WB_2.x og Work. "
     "Systemfilerne gemmes i WB_2.x. Det er "
     "her Workbench befinder sig. På Work "
     "gemmer De Deres egne filer.\n\n"
))

(set #cant-fit-1
(cat "Overskrive"
))

(set #cant-fit-2
(cat "Afbryde"
))

(set #reselect-on
(cat "\n\nReselection vil nu blive aktiveret for alle SCSI "
     "enheder. Data gemt på harddiskene berøres ikke."
))

(set #reselect-off
(cat "\n\nReselection vil blive deaktiveret for alle SCSI "
     "enheder. Data gemt på harddiskene berøres ikke."
))

(set #reselect-help
(cat "Reselection er en hardware egenskab, der gør det muligt "
     "for flere SCSI eller IDE enheder tilsluttet samme computer, "
     "at fungere bedre sammen."
))

(set #reselect-1
(cat "Fortsætte"
))

(set #reselect-2
(cat "Afbryde"
))

(set #reselect-on-ok
(cat "\nReselection er nu aktiveret for alle SCSI enheder. De er nødt "
     "til at slukke/tænde Deres Amiga før ændringen træder i kraft."
))

(set #reselect-off-ok
(cat "\nReselection er nu deaktiveret for alle SCSI enheder. De er nødt til "
     "at slukke/tænde Deres Amiga før ændringen træder i kraft."
))

(set #confirm-sk
(cat "\n\nNu kopieres en ny version af SuperKickstart filerne til "
     "Deres A3000 eller A3000T harddisk."
))

(set #confirm-sk-help
(cat "\nSuperKickstart filen er nødvendig for at Deres Amiga 3000 "
     "eller 3000T kan fungere. De skal bruge en SuperKickstart floppy disk "
     "for at kunne foretage installationen."
))

(set #confirm-sk-1
(cat "Fortsætte"
))

(set #confirm-sk-2
(cat "Afbryde"
))

(set #sk-ok
(cat "\n\nDe nye SuperKickstart filer er nu installeret på Deres "
     "harddisk. De er nødt til at slukke/tænde Deres Amiga for at "
     "bruge den nye SuperKickstart."
))

))


;=============================================================================
; Swedish strings

(if (= @language "svenska")
(
(set #bad-kick
(cat "Du måste använda Kickstart 2.04 för att kunna installera Workbench 2.1"
))

(set #bad-boot
(cat "Starta om datorn från disketten \"Amiga Install\" Version 2.1 "
     "innan du försöker starta detta installationsprogram"
))

(set #introduction
(cat "\nHDSetup låter dig utföra olika inställningar av hårddisken. Du måste "
     "ha ett av dessa styrkort/datorer för att kunna använda detta program:\n\n"
     "· A590    styrkort till hårddisk\n"
     "· A2091   styrkort till hårddisk\n"
     "· A600HD  Amiga-dator           \n"
     "· A2000HD Amiga-dator           \n"
     "· A2500   Amiga-dator           \n"
     "· A3000   Amiga-dator           \n"
     "· A3000T  Amiga-dator           \n"
))

(set #what-to-do
(cat "\nVälj uppgiften du vill utföra\n"
))

(set #what-to-do-help
(cat "Valet \"Partitionera hårddisk\" lågnivåformatterar "
     "din hårddisk. Hårddisken kommer att indelas i standard-partitioner.\n\n"
     "Valen \"Slå på reselection\" och \"Slå av "
     "reselection\" låter dig kontrollera inställningen "
     "\"reselection\" på alla SCSI- och IDE-enheter "
     "anslutna till systemet.\n\n"
     "Slutligen, \"Uppdatera A3000/A3000T SuperKickstart\" "
     "låter ägare av Amiga 3000 och 3000T uppgradera  "
     "SuperKickstart-filen på deras hårddiskar.\n\n"
     @askchoice-help
))

(set #what-to-do-1
(cat "Partitionera hårddisk"
))

(set #what-to-do-2
(cat "Slå på reselection"
))

(set #what-to-do-3
(cat "Slå av reselection"
))

(set #what-to-do-4
(cat "Uppdatera A3000/A3000T SuperKickstart"
))

(set #ask-unit
(cat "\nDetta kommer att lågnivåformattera din hårddisk. "
     "Hårddisken kommer att indelas i standard-partitioner.\n\n"
     "Vilken hårddisksenhet vill du partitionera om?\n\n"
     "Amiga-datorer med SCSI-hårddiskar (A590, A2000HD, A2500, A3000) "
     "använder normalt enhet 6. Amiga-datorer med IDE-hårddiskar (A600HD) "
     "använder normalt enhet 0."
))

(set #ask-unit-help
(cat "\nAtt partitionera en hårddisk innebär att indela den i "
     "separata delar. Detta program indelar din hårddisk i två "
     "separata delar: WB_2.x och Work. WB_2.x är den delen där "
     "systemfiler lagras och Workbench-filerna finns. Work är "
     "delen där du lagrar program du köper och filer du skapar "
     "själv.\n\n"
     "Varje SCSI- eller IDE-hårddisk har ett enhetsnummer "
     "Detta nummer ställs vanligtvis in med byglar på hårddisken.\n\n"
     "Amiga-datorer med SCSI-hårddiskar "
     "(A590, A2000HD, A2500, A3000) levereras med hårddisken inställd som "
     "enhet 6. Amiga-datorer med IDE-hårddiskar (A600HD) levereras med hårddisken "
     "inställd som enhet 0.\n\n"
))

(set #confirm-partition
(cat "\n\nVill du partitionera din hårddisk med enhetsnummer %lu ?\n\n"
     "All data på hårddisken kommer att försvinna!"
))

(set #confirm-partition-help
(cat "\nAtt partitionera en hårddisk innebär att indela den i "
     "separata delar. Detta program indelar din hårddisk i två "
     "separata delar: WB_2.x och Work. WB_2.x är den delen där "
     "systemfiler lagras och Workbench-filerna finns. Work är "
     "delen där du lagrar program du köper och filer du skapar "
     "själv.\n\n"
))

(set #confirm-partition-1
(cat "Fortsätt"
))

(set #confirm-partition-2
(cat "Avbryt"
))

(set #hw-failure
(cat "Proceduren misslyckades!\n\nKontrollera din hårdvara och försök igen."
))

(set #use-hdtoolbox
(cat "Du behöver använda HDToolBox för att göra special-indelningar av "
     "hårddisken."
))

(set #complete-partition
(cat "Partitionering klar. Sätt nu in disketten "
     "\"Amiga Install\" i en diskettenhet och starta om datorn.\n\n"
     "När detta är gjort måste du formattera de två nya partitionerna "
     "För att göra detta, välj partitions-symbolen \"WB_2.x\" från Workbench, "
     "och välj \"Icons/Format Disk...\" i menyn. "
     "Repetera detta för symbolen \"Work\".\n\n"
     "När formatteringen är klar kan du installera Workbench 2.1 på \"WB_2.x\" "
     "genom att starta programmet Install 2.1."
))

(set #cant-fit
(cat "\nKan inte få plats med de ny partitionerna på "
     "hårddisken eftersom andra partitioner redan tar upp allt utrymme.\n\n"
     "Vill du skriva över alla andra partitioner? Detta gör i så fall "
     "att du förlorar all information på dessa partitioner."
))

(set #cant-fit-help
(cat "\nAtt partitionera en hårddisk innebär att indela den i "
     "separata delar. Detta program indelar din hårddisk i två "
     "separata delar: WB_2.x och Work. WB_2.x är den delen där "
     "systemfiler lagras och Workbench-filerna finns. Work är "
     "delen där du lagrar program du köper och filer du skapar "
     "själv.\n\n"
))

(set #cant-fit-1
(cat "Skriv över"
))

(set #cant-fit-2
(cat "Avbryt"
))

(set #reselect-on
(cat "\n\n\"Reselection\" för alla SCSI-enheter är nu PÅ. "
     "Data på hårddisken påverkas inte."
))

(set #reselect-off
(cat "\n\n\"Reselection\" för alla SCSI-enheter är nu AV. "
     "Data på hårddisken påverkas inte."
))

(set #reselect-help
(cat "Reselection är en hårddisk-finess som i vissa fall kan få "
     "prestanda att bli högre med fler än en hårdddisk ansluten till "
     "samma styrkort."
))

(set #reselect-1
(cat "Fortsätt"
))

(set #reselect-2
(cat "Avbryt"
))

(set #reselect-on-ok
(cat "\nReselection är nu PÅ för alla SCSI-enheter. Starta "
     "om din Amiga för att låta förändringen börja verka."
))

(set #reselect-off-ok
(cat "\nReselection är nu AV för alla SCSI-enheter. Starta "
     "om din Amiga för att låta förändringen börja verka."
))

(set #confirm-sk
(cat "\n\nEn ny version av SuperKickstart-filen kommer "
     "nu att kopieras till hårddisken på din A3000 or A3000T."
))

(set #confirm-sk-help
(cat "\nSuperKickstart-filen läses in från hårddisken till RAM-minnet "
     "i din A3000 eller 3000T, och är nödvändig för att den skall fungera. "
     " Den motsvaras av "
     "ett ROM i andra Amiga-modeller. För att uppdatera denna fil till en "
     "nyare version, så behöver du en SuperKickstart-diskett."
))

(set #confirm-sk-1
(cat "Fortsätt"
))

(set #confirm-sk-2
(cat "Avbryt"
))

(set #sk-ok
(cat "\n\nDen nya SuperKickstart-filen är nu installerad på din "
     "hårddisk. Starta om din Amiga genom att slå av, och sedan på den för "
     "att utnyttja din nya SuperKickstart."
))

))


;=============================================================================
; Norwegian strings

(if (= @language "norsk")
(
(set #bad-kick
(cat "Du må ha Kickstart 2.04 for å installere Workbench 2.1"
))

(set #bad-boot
(cat "Du må starte fra disketten \"Amiga Install\" Version 2.1 "
     "før du kan kjøre dette installasjonsprogrammet"
))

(set #introduction
(cat "\nHDSetup lar deg utføre forskjellig vedlikehold av harddisker. "
     "Du må ha en av følgende maskinvarer for å kunne benytte "
     "dette programmet:\n\n"
     "· A590 harddisk kontroller   \n"
     "· A2091 harddisk kontroller  \n"
     "· A600HD Amiga system        \n"
     "· A2000HD Amiga system       \n"
     "· A2500 Amiga system         \n"
     "· A3000 Amiga system         \n"
     "· A3000T Amiga system        \n"
))

(set #what-to-do
(cat "\nVelg den operasjonen som skal utføres\n"
))

(set #what-to-do-help
(cat "\nFeltet \"Partisjonér Harddisk\" vil "
     "lavnivå-formatere harddisken din. Harddisken "
     "vil også bli om-partitsjo- nert til standard "
     "konfigurasjon.\n\n"
     "Feltet \"Sett Reselection på\" og \"Sett "
     "Reselection av\" lar deg "
     "kontrollere \"reselection\" på alle SCSI og IDE enheter "
     "som er koplet til systemet.\n\n"
     "Feltet \"Oppdater A3000/A3000T SuperKickstart\" "
     "lar eiere av Amiga 3000 og 3000T oppgradere "
     "deres maskins SuperKickstart-fil.\n\n"
     @askchoice-help
))

(set #what-to-do-1
(cat "Partisjonér Harddisk"
))

(set #what-to-do-2
(cat "Sett Reselection på"
))

(set #what-to-do-3
(cat "Sett Reselection av"
))

(set #what-to-do-4
(cat "Oppdater A3000/A3000T SuperKickstart"
))

(set #ask-unit
(cat "Dette vil lavnivå-formatere harddisken din. "
     "Harddisken vil også bli om-partitsjonert til "
     "standard konfigurasjon.\n\n"
     "Hvilken harddisk skal partisjoneres?\n\n"
     "Amigasystemer med SCSI harddisker "
     "(A590, A2000HD, A2500, A3000) benytter "
     "vanligvis enhet 6, mens systemer med IDE "
     "harddisker (A600HD) benytter enhet 0."
))

(set #ask-unit-help
(cat "\nPartisjonering av en harddisk betyr "
     "at man deler den i flere deler. "
     "Dette programmet vil dele din harddisk "
     "i to hoveddeler: WB_2.x og Work.\n\n"
     "WB_2.x benyttes til å lagre system-filer "
     "og Workbench-filer. Work benyttes "
     "til å lagre dine egne filer.\n\n"
     "Hver SCSI eller IDE harddisk har et "
     "enhetnummer. Dette nummeret "
     "er vanligvis styrt av 'jumpere' "
     "på harddiskene.\n\n"
     "Amigasystemer med SCSI harddisker "
     "(A590, A2000HD, A2500, A3000) "
     "bruker enhet 6. Amigasystemer med IDE "
     "harddisker (A600HD) benytter enhet 0.\n\n"
))

(set #confirm-partition
(cat "\n\nØnsker du å partisjonere din harddisk enhet %lu ?\n\n"
     "Alle data på harddisken vil gå tapt!"
))

(set #confirm-partition-help
(cat "\nPartisjonering av en harddisk betyr "
     "at man deler den i flere deler. "
     "Dette programmet vil dele din harddisk "
     "i to hoveddeler: WB_2.x og Work.\n\n"
     "WB_2.x benyttes til å lagre system-filer "
     "og Workbench-filer. Work benyttes "
     "til å lagre dine egne filer.\n\n"
))

(set #confirm-partition-1
(cat "Fortsett"
))

(set #confirm-partition-2
(cat "Avbryt"
))

(set #hw-failure
(cat "Prosedyre feilet!\n\nSjekk maskinvaren din og prøv igjen."
))

(set #use-hdtoolbox
(cat "Du må bruke HDToolBox til å "
     "lage egne partisjoneringer."
))

(set #complete-partition
(cat "Partisjoneringen er ferdig. Sett inn "
     "disketten \"Amiga Install\" i diskettstasjonen "
     "og start maskinen på nytt.\n\n"
     "Med en gang maskinen har startet igjen, "
     "må du formatre de to nye partisjonene. "
     "Velg \"WB_2.x\"-ikonet fra Workbench, og "
     "deretter \"Icons/Format Disk...\" fra menyen. "
     "Repeter den samme prosedyre for \"Work\"-ikonet.\n\n"
     "Når for formateringen er ferdig, kan du installere "
     "Workbench 2.1 programmvare på \"WB_2.x\" ved å starte "
     "programmet Install 2.1 ."
))

(set #cant-fit
(cat "\nKan ikke lage nye partisjoner "
     "på harddisken fordi andre "
     "partisjoner har brukt opp all "
     "plassen.\n\n"
     "Ønsker du å overskrive alle de "
     "andre partisjonene? Dette vil slette "
     "all informasjon lagret på disse "
     "partisjonene."
))

(set #cant-fit-help
(cat "\nPartisjonering av en harddisk betyr "
     "at man deler den i flere deler. "
     "Dette programmet vil dele din harddisk "
     "i to hoveddeler: WB_2.x og Work.\n\n"
     "WB_2.x benyttes til å lagre system-filer "
     "og Workbench-filer. Work benyttes "
     "til å lagre dine egne filer.\n\n"
))

(set #cant-fit-1
(cat "Overskriv"
))

(set #cant-fit-2
(cat "Avbryt"
))

(set #reselect-on
(cat "\n\n\"Reselection\" for alle SCSI-enheter vil nå bli satt "
     "PÅ. Data som er lagret på harddisker vil ikke påvirkes."
))

(set #reselect-off
(cat "\n\n\"Reselection\" for alle SCSI-enheter vil nå bli satt "
     "AV. Data som er lagret på harddisker vil ikke påvirkes."
))

(set #reselect-help
(cat "\"Reselection\" er en innstilling som lar "
     "flere SCSI- eller IDE-enheter som er koblet til samme "
     "datamaskin fungere bedre sammen."
))

(set #reselect-1
(cat "Fortsett"
))


(set #reselect-2
(cat "Avbryt"
))

(set #reselect-on-ok
(cat "\n\"Reselection\" er nå slått på for alle SCSI-enheter. "
     "'Reset' din Amiga for at forandringen skal iverksettes."
))

(set #reselect-off-ok
(cat "\n\"Reselection\" er nå slått av for alle SCSI-enheter. "
     "'Reset' din Amiga for at forandringen skal iverksettes."
))

(set #confirm-sk
(cat "\n\nEn ny versjon av SuperKickstart-filen vil "
     "nå bli kopiert til din A3000 eller A3000T harddisk."
))

(set #confirm-sk-help
(cat "\nSuperKickstart-filen er det som lar en Amiga 3000 "
     "eller 3000T fungere. For å installere en ny versjon, "
     "vil du trenge en SuperKickstart-diskett."
))

(set #confirm-sk-1
(cat "Fortsett"
))

(set #confirm-sk-2
(cat "Avbryt"
))

(set #sk-ok
(cat "\n\nEn ny SuperKickstart-fil er nå installert på din "
     "harddisk. Slå Amigaen av i noen sekunder, og deretter"
     "på igjen for å benytte den nye SuperKickstarten."
))

))


;=============================================================================
; make sure we are running under a 2.04 ROM

(if (< (/ (getversion) 65536) 37)
(
    (abort #bad-kick)
))


;=============================================================================
; make sure we booted from the 2.1 Install disk

(if (<> (getassign "SYS" "a") "Install2.1:")
(
    (abort #bad-boot)
))


;=============================================================================
; introduce ourselves

(message #introduction)


;=============================================================================
; what does the user want to do?

(set action (askchoice (prompt #what-to-do)
		       (help #what-to-do-help)
		       (choices #what-to-do-1 #what-to-do-2 #what-to-do-3 #what-to-do-4)
	    )
)


;=============================================================================
; Partition HD

(if (= action 0)
(
    (if (set unit (asknumber (prompt #ask-unit)
			     (help #ask-unit-help)
			     (range 0 6)
			     (default 6)
		  )
	)
    (
	(if (askbool (prompt (#confirm-partition unit))
		     (help #confirm-partition-help)
		     (choices #confirm-partition-1 #confirm-partition-2)
	    )
	(
	    (set result (run "C:Prod_Prep Unit " unit " layout PrepScripts/PrepScript"))
	    (if (>= result 10)
	    (
		(abort #hw-failure)
	    )
	    (
		(if (>= result 5)
		(
		    (if (askbool (prompt #cant-fit)
				 (help #cant-fit-help)
				 (choices #cant-fit-1 #cant-fit-2)
			)
		    (
			(set result (run "C:Prod_Prep Unit " unit " layout PrepScripts/PrepScriptForce"))
			(if (>= result 10)
			(
			    (abort #hw-failure)
			))
		    )
		    (
			(abort #use-hdtoolbox)
		    ))
		))

		(if (= result 0)
		(
		    (message #complete-partition)
		))
	    ))
	))
    ))
))


;=============================================================================
; Reselection on

(if (= action 1)
(
    (if (askbool (prompt #reselect-on)
		 (help #reselect-help)
		 (choices #reselect-1 #reselect-2)
	)
    (
	(run "C:Prod_Prep >NIL: Unit 6 layout PrepScripts/ReselectOn")
	(run "C:Prod_Prep >NIL: Unit 5 layout PrepScripts/ReselectOn")
	(run "C:Prod_Prep >NIL: Unit 4 layout PrepScripts/ReselectOn")
	(run "C:Prod_Prep >NIL: Unit 3 layout PrepScripts/ReselectOn")
	(run "C:Prod_Prep >NIL: Unit 2 layout PrepScripts/ReselectOn")
	(run "C:Prod_Prep >NIL: Unit 1 layout PrepScripts/ReselectOn")
	(run "C:Prod_Prep >NIL: Unit 0 layout PrepScripts/ReselectOn")

	(message #reselect-on-ok)
    ))
))


;=============================================================================
; Reselection off

(if (= action 2)
(
    (if (askbool (prompt #reselect-off)
		 (help #reselect-help)
		 (choices #reselect-1 #reselect-2)
	)
    (
	(run "C:Prod_Prep >NIL: Unit 6 layout PrepScripts/ReselectOff")
	(run "C:Prod_Prep >NIL: Unit 5 layout PrepScripts/ReselectOff")
	(run "C:Prod_Prep >NIL: Unit 4 layout PrepScripts/ReselectOff")
	(run "C:Prod_Prep >NIL: Unit 3 layout PrepScripts/ReselectOff")
	(run "C:Prod_Prep >NIL: Unit 2 layout PrepScripts/ReselectOff")
	(run "C:Prod_Prep >NIL: Unit 1 layout PrepScripts/ReselectOff")
	(run "C:Prod_Prep >NIL: Unit 0 layout PrepScripts/ReselectOff")

	(message #reselect-off-ok)
    ))
))


;=============================================================================
; Update Kickstart

(if (= action 3)
(
    (if (askbool (prompt #confirm-sk)
		 (help #confirm-sk-help)
		 (choices #confirm-sk-1 #confirm-sk-2)
	)
    (
	(run "C:MakeFiles <>CON:0/0/640/200/Update_SuperKickstart/NOSIZE df0: 2.0 WB_2.x:Devs/Kickstart")
	(message #sk-ok)
    ))
))


;=============================================================================
; bye

(exit (quiet))


;=============================================================================
; we never get here, but this keeps the Installer from being a pest
(welcome)