Great Valley Products SCSI Controllers
--------------------------------------
·  When using Chinon CD-ROM drives with GVP SCSI Controllers, you will
need to add the following line to your s:startup-sequence or
s:user-startup file BEFORE the CD-ROM drive is mounted.

		gvpscsictrl # dcoff

where # represents the SCSI unit number of your CD-ROM drive.  For
example, with Chinon CD-ROM drive connected as SCSI unit #1, you
would add:

		gvpscsictrl 1 dcoff

This command will be found on the GVP install disk and should be
copied to your C: directory, if you have not already done so.




·  The NEC-25 (or Media Vision MV-2) CD-ROM drive will need
version 4.13 or greater of the GVP firmware when being used with 
a GVP controller card in a machine other than the A1200.  With
an Amiga 1200 and a GVP A1291, you will need version 5.4 of the
SCSI firmware.  Contact GVP (!) for further details.





Dataflyer SCSI+
---------------
·  When using the SCSI+ (IDE to SCSI converter), you will need to
ensure that the DataFlyer driver software is executed BEFORE
the CD-ROM drive is mounted.    This can be accomplished by
ensuring that the block of commands to mount AsimCDFS (see below)
are moved to the END of the s:user-startup file.  If needed, use your 
favourite text editor to move the commands.

	;BEGIN AsimCDFS
	echo "Mounting AsimCDFS..."
	assign AsimCDFS: SYS:AsimCDFS
	assign AsimCDFS_Buffer: ND0:AsimCDFS_Buffer
	mount >NIL: CD0:
	;END AsimCDFS



·  The NEC-25 (or Media Vision MV-2) CD-ROM drive does not work
with the Dataflyer SCSI products.






Amiga 3000, A4091, A590, A2091
------------------------------
·  When using Pioneer multi-disc CD-ROM changers, you will need to
ensure that the SCSI controller card has the Logical Units enabled.
With the A4091, A2091 and A590, this is accomplished via a jumper
or DIP switch.  Consult your manual for its exact location.

On the Amiga 3000, this is accomplished via an option in the Amiga
3000's battery backed RAM.  We suggest using the program SCSIPrefs
by Martin A. Blatter, which can be found on Fred Fish disk #532.

In addition, you will need to UNSELECT the Ignore LUNS on Open?
flag for each device CD0 through CD5 (for separate mode) or
for CD0 (for pooled mode) via AsimCDFS_Prefs.