ReadMe for Aura 1.01 ==================== Manual ====== The section in the Menus chapter which describes the setting and use of the Undo and Edit buffers has been omitted. Quite simply, this panel allows you to determine the devices which Aura will attempt to use for the two buffers. By default the Undo buffer is set to "SYS:" (the current System device) and the Cut and Paste buffer to "T:" (normally the RAM disk). The SELECT buttons to the right of each disply will produce the system file-selector which will allow you to guide Aura to a device and drawer of your own choosing. The settings for the devices can be saved in the usual way by selecting the Save Settings option at the foot of the Settings menu. From then on, Aura will read the storage devices from the "Aura_Settings.inf" file. Known problems ============== Undo and Edit Buffers --------------------- A problem can occur if Aura receives a disk error during an Undo or Edit buffer operation. Amongst other things, this may happen because the nominated device has run out of space or is locked or write protected. If an error occurs, a message appears on the Workbench screen which you must CANCEL. This will then take back into Aura and you will be confronted by another error message which you must also answer. This rather awkward arrangement is being addressed for an updated version of the software. New Window Requester -------------------- After typing a new frequency into the sample Rate field, you MUST hit either the Return or Enter keys afterwards in order to force Aura to recognise the new value. This will also cause the program to adjust the timings in the bottom left-hand corner of the display as necessary. Simply clicking on the OK button is not good enough, otherwise the new sample rate will be ignored, reverting to its original setting. Finally ======= To obtain your 30 days free technical support and notification of Aura software updates, please complete your registration card and return it to: North America Rest of world Oregon Research HiSoft 16200 SW Pacific Highway The Old School Suite 162 Greenfield Tigard Bedford OR 97223 MK45 5DE U.S.A. U.K. Phone: +1 503 620 4919 +44 (0)525 718181 FAX: +1 503 624 2940 +44 (0)525 713716 Email: orres@teleport.com hisoft@cix.compulink.co.uk Please remember, UK technical support IS between 2-3p.m. Mon-Fri If you need technical support, please remember to have when you phone, your: Serial Number Software version number Machine configuration (RAM,Processor,Hard disk etc.) Please also have a clear and concise description of the problem you are having to ensure that we can deal with your problem as quickly as possible.