;**************************************************************************** ; A2000-060 Install Script ; Version 1.0 ; $VER: 1.9 (10 August 1995) © TekMagic ; ; Original by Jeff Boyer-------- 10 August 1995 ; New for 060 by Jeff Boyer 30 January 1996 ; Copyright 1995 by TekMagic , Inc. ; ; Written for use with Commodore's Installer V1.24 ;**************************************************************************** ;**************************************************************************** ; Some useful variables ;**************************************************************************** (set disklab "TekMagic.Install") ;Source disk for new files (set disklab2 (cat disklab ":")) ; Source disk, with colon (set os_ver (/ (getversion) $0000FFFF)) ; version of AmigaDOS... ;**************************************************************************** ; Various parts of this install program require AmigaDOS 2.0. ; Then again, GForce requires 2.0. Prevent usage by those ; running obsolete versions of the operating system. ;**************************************************************************** (if (< os_ver 36) ( (abort "You need AmigaDOS V36 or later to complete the installation " "process. Furthermore, you need AmigaDOS V37 or later to run " "using the Motorola 680060. Please upgrade your system and " "try again.") )) ;(if (< kickstart_ver 39) ; ( ; (abort "You need KickStart V40 (3.1 ROM) or later to to run using the" ; "Motorola 68060. Please upgrade your system and try again.") ; )) ; ;**************************************************************************** ; We need to find out where the usual SYS: partition is. Currently looks ; for WB_2.x:, System2.0:, or dh0:. Ask user if we can't figure out where ; s/he boots from, and/or for confirmation. ;**************************************************************************** (set target (getassign "wb_2.x" 'd')) ; Device-only check. (if (= target "") (set target (getassign "System2.0" 'v'))) ; VolumeName-only check. (if (= target "") (set target (getassign "dh0" 'd'))) ; Device-only check. (if (= target "") (set target (getassign "System2.0"))) ; Logical assign check. (if (= target "") (set target (getassign "dh0"))) ; Logical assign check. ;**************************************************************************** ; If we're at Wit's End: ;**************************************************************************** (if (= target "") (set target @default-dest)) ; default destination ;**************************************************************************** ; Now, make absolutely, positively sure that we go to the right place. ;**************************************************************************** (set target (askdir (prompt "Which partition do you usually boot from?\n" "The required utilities should be installed there.") (help @askdir-help) (default target))) ;**************************************************************************** ; Install new SetPatch command. Use CopyLib so that version numbers are checked. ;**************************************************************************** (copylib (source (tackon disklab2 "c/SetPatch")) (dest (tackon target "c")) (infos) (confirm) (prompt "Shall I install the new SetPatch command?") (help "You need the very latest SetPatch in order for the '060 " "system to function properly and reliably. Please check " "the version numbers carefully, and use the newer version.\n\n" @copylib-help)) ;**************************************************************************** ; Install new CPU. Use CopyLib so that version numbers are checked. ;**************************************************************************** (copyfiles (source (tackon disklab2 "tekmagic/68060/Tek060")) (dest (tackon target "c")) (infos) (confirm) (prompt "Shall I install the new \"Tek060\" CPU control Program?") (help "The \"Tek060\" CPU control Program allows the user to control " "the 68060 cache settings.\n\n" @copylib-help)) ;**************************************************************************** ; Install 68060.library ;**************************************************************************** (copyfiles (source (tackon disklab2 "tekmagic/68060/libs_060")) (dest (tackon target "libs")) (pattern "68#?") (infos) (confirm) (prompt "These libraries must be installed for the 68060 to run" " correctly") (help "Both of these libraries are required by the system in " "order to function properly and reliably. If you presently " "have a 68040.library it needs to be replaced with the " "TekMagic 68040.library for the 68060.library to install " "properly. \n\n" @copylib-help)) ;**************************************************************************** ; Install sys:tekmagic/68040/ksremap ;**************************************************************************** (copyfiles (source (tackon disklab2 "TekMagic/68040")) (dest (tackon target "Utilities")) (pattern "(KSReMap|Reboot#?)") (infos) (confirm) (prompt "The following MUST be installed in sys:utilities:\n") (help "KSRemap - allows for the Remapping of the KickStart ROMS" " into Fast Memory to enhance system performance. \n" "Reboot - allows for the Rebooting with the original" " 68000 CPU to maintian 100% backward compatibility. \n" @copyfiles-help)) ;**************************************************************************** ; Install sys:TekMagic /SCSI/(Fast|Expert)Prep ;**************************************************************************** (copyfiles (source (tackon disklab2 "TekMagic/gvp/SCSI")) (dest (tackon target "Utilities")) (pattern "(SCSI|Fast|Expert)#?") (infos) (confirm) (prompt "The following should be installed in sys:utilities:\n") (help "FastPrep - Automated Hard Drive Prep-and- \n" " Format utility. \n" "ExpertPrep - Advanced Hard Drive Prep-and- \n" " Format utility. \n" "SCSIMaskFix - See ReadMe file on TekMagic install \n" " disk \n" @copyfiles-help)) ;**************************************************************************** ; Alter user-startup and add KSRemap option. ;**************************************************************************** ;(startup "68060_KSRemap" ; (prompt "Would you like to enhance performance by adding " ; "KickStart remap to your user-startup? If so, click; on " ; "'Proceed'. Note this will only modify the user-startup " ; "file of the device you booted from. If you will be " ; "booting from another device add the line \"YOUR_boot_device" ; "/utilities/ksremap\" to that boot device's user-startup" ; " file. ") ; (help "This will automatically copy the Kickstart image " ; "and the Supervisor Stack Pointer into the 68060's " ; "extremely Fast RAM. It will be MUCH faster than " ; "reading from ROM and Chip RAM, and will increase " ; "system performance greatly.\n") ; (command "utilities/ksremap")) ;**************************************************************************** ; Modify Startup-sequence. Use plenty of safeguards. ;**************************************************************************** (set mods_ok (askbool (prompt "To maximin system performance with the 68060 " "there are several lines that need to added to " "your startup-sequence. Is it okay to modify " "your startup-sequence? The command \"SetPatch\"" "should be added to optimize performance with " "the 68060. ") (choices "Yes" "No") (default "Yes") (help "SetPatch MUST appear as the second line of " "the s:startup-sequence file.\n" "For additional security, a copy of your original\n" "startup-sequence will be made and will be stored as\n" "\"s:startup-sequence.backup\".") ) ) (if mods_ok ( ; Make backup copy of s:startup-sequence safely... ; Do NOT check the return code---this may be an update, or ; s/he may already have a delete-protected backup copy. (run (cat "c:copy \"" (tackon target "S/Startup-Sequence") "\" \"" (tackon target "S/Startup-Sequence.Backup") "\" clone") (prompt "Making backup copy of " (tackon target "S/Startup-sequence") ".\n" "It will be called '" (tackon target "S/Startup-Sequence.Backup") "'.") ) ; Protect recently made backup copy from re-installations. ; Works ONLY for Installer 1.9 or better (protect (cat (tackon target "s/Startup-Sequence.Backup") " -d")) ; Now patch the beginning of s:startup-sequence. This requires V36. ; fsrc = run "gforce_060:utilities/fixstartup" "target:s/startup-sequence" ; BTW, fs_rc stands for FixStartup_ReturnCode... (set fs_rc (run (cat "\"" (tackon disklab2 "TekMagic/68040/FixStartup") "\" \"" (tackon target "s/Startup-Sequence") "\" NOREPEAT" ))) ; Check return code; this operation is vital to proper installation. (if (> fs_rc 5) ( (message "WARNING: there was a problem patching your " "startup-sequence . Please add the following " "line at the beginning of your s:startup-sequence " " file:\n\n" "c:Setpatch >nil:\n") ) ) (onerror (message "Sorry, but either your startup-sequence is missing " "or is too heavily modified for the Installer program " "to understand and make the change.\n\n" "Modifying the startup-sequence is the last step in " "the A2000-060 installation; all of the other " "necessary files have been installed. After " "Installer exits, you must examine your " "startup-sequence file and use a text editor to make " "the following change:\n\n" "") (message "Make sure that the first line in the startup-sequence " "is:\n\n" " c:SetPatch >nil:\n\n") ) ) ; else ( (message "You will have to make the following change by hand:\n\n" "The first line of your startup-sequence MUST read " "as follows:\n\n" " c:setpatch >nil:\n\n") ) ) ;**************************************************************************** ; Install "Ksremap" at top of "startup-sequence" ;**************************************************************************** (textfile (dest (tackon target "s/startup-sequence")) (include (tackon disklab2 "tekmagic/68040/ksremap.script")) (include (tackon target "s/startup-sequence")) (prompt "Do you want to add \"KSREMAP\" to your startup-sequence? " "The command KSREMAP will enhance performance by remapping " "your KiskStart ROM to fast memory.") (confirm) (help "This command will automatically copy the Kickstart " "image into the 68060's extremely Fast RAM. It will " "be MUCH faster than reading from ROM and Chip RAM, " "and will increase system performance greatly.\n")) ;**************************************************************************** ; For automatic end-of-script message displaying the name of the place where ; the software was installed... ;**************************************************************************** ( run "echo >envarc:babel68060.config quiet prealloc 524288") ;( run "echo >envarc:babel68060.config prealloc 524288") (set @default-dest target)