;$VER: AsimCDFS Install 3.11 (3.4.98) ;Copyright ©1993-1998 Asimware Innovations Inc. (onerror ( (makeassign "AsimCDFSInst") (makeassign "AsimCDFS") (makeassign "AsimCDFS_Buffer") )) (set #typeAMIGA 0) (set #typeCDTV 1) (set #typeCD32 2) (set #typeATAPI 3) (set #typeFLYER 4) (set #autoMount 1) (set #CDDefault_NC "CD0" ) (set #isPioneer 0) (set #isNakamichi 0) (set #isNakamichi4Disc 0) (set #isPDCD 0) (set #is4X4 0) (set #PioneerSeparate 0) (set #wbversion (getversion "libs:version.library")) (set #wbversion (/ #wbversion 65536) ) (set #SCSIDevice "scsi.device") (set #SCSIUnit 4) (set @default-dest "SYS:AsimCDFS") (set #text_mountheader (cat "/************************************************************************/\n" "/* AsimCDFS v3 MountList entry -- ©1993-1998 Asimware Innovations Inc. */\n" "/************************************************************************/\n" )) (set #text_mountfiller (cat " Buffers = 0\n" " BufMemType = 5\n" " Mask = 0xffffffe\n" " Flags = 0\n" " FileSystem = l:AsimCDFS\n" " DosType = 0x662dabac\n" " GlobVec = -1\n" " Reserved = 0\n" " LowCyl = 0\n" " HighCyl = 999\n" " Surfaces = 1\n" " BlocksPerTrack = 32\n" " Priority = 10\n" " StackSize = 5000\n" )) (set #theirlevel @user-level ) (user 2) (set #English 0) (set #Deutsch 1) (set #Français 2) (set #Italiano 3) (set #Svenska 4) ;***** ; set the language we will be using ; (if (= @language "english") (set #our_language #English) ) (if (= @language "deutsch") (set #our_language #Deutsch) ) (user #theirlevel) ;***** ; set English language strings (if (= #our_language #English) ( (set #echotxt "echo \"Mounting AsimCDFS...\"\n" ) (set #text_please_use_novice (cat "Installation notes\n" "------------------\n\n" "We have noticed problems with the Installer " "program when using Expert or Intermediate mode. The " "general Novice install is recommended for most, if not " "all situations.\n" )) (set #text_needwb_2 (cat "\n\nAmigaDOS 2.0 or higher is required for AsimCDFS 3.x. " "\n\nAn upgrade will be needed for your Amiga." "\n\nYou are currently running version " #wbversion "." )) (set #tp_insert_disk "Please insert the disk labeled \"AsimCDFS_v3_Install\"." ) (set #th_insert_disk "AsimCDFS FileSystem and other utilities will be copied from this disk into your system.") (set #text_abort1 "\n\nApproximately ") (set #text_abort2 "K of disk space is needed on your SYS: volume.\n\nYou only have ") (set #text_abort3 "K free.\n\nDelete or transfer some files from the SYS: volume and try again.") (set #tp_isamiga "\nAsimCDFS v3.9a Install\n-------------------\n\Please describe your setup:") (set #th_isamiga (cat "\n\nIf AsimCDFS is being used in conjunction with a CDTV/A570 unit " "then note this with the CDTV/A570 selection.\n\n" "If AsimCDFS is being used with a CD³² unit, then note this with the CD³² selection.\n\n" "Otherwise, you will be installing AsimCDFS on an Amiga equipped " "with a SCSI or IDE controller and SCSI or ATAPI CD-ROM drive.") ) (set #tc_isamiga_1 "Amiga with SCSI CD-ROM") (set #tc_isamiga_2 "CDTV/A570") (set #tc_isamiga_3 "CD³²") (set #tc_isamiga_4 "ATAPI CD-ROM on A4000/A1200") (set #tc_isamiga_5 "NewTek Flyer with CD-ROM (unit #6) on SCSI-C") (set #tp_ispioneer "\n\n\nIs your CD-ROM drive a Pioneer DRM-60x?") (set #th_ispioneer (cat "\n\nIf you are using AsimCDFS with a Pioneer DRM-60x, indicate this " "in your choice. This drive is a high-performance 6-disc minichanger and " "is not common." "\n\nOtherwise select Other CD-ROM.") ) (set #tc_othercdrom "Other CD-ROM") (set #tp_isnakamichi "\n\n\nIs your CD-ROM drive a Nakamichi MBR-7,\n a NEC 4xc or a NEC 2xc 7-disc CD-ROM changer?") (set #th_isnakamichi (cat "\n\nIf you are using AsimCDFS with a Nakamichi MBR-7, a NEC 4xc or a NEC 2xc 7-disc CD-ROM changer, indicate this " "in your choice. This drive is a high-performance 7-disc minichanger and " "is not common." "\n\nOtherwise select Other CD-ROM.") ) (set #tp_isnakamichi4disc "\n\n\nIs your CD-ROM drive a Nakamichi MJ-4 4-disc CD-ROM changer?") (set #th_isnakamichi4disc (cat "\n\nIf you are using AsimCDFS with a Nakamichi MJ-4 4-disc CD-ROM changer, indicate this " "in your choice. This drive is a high-performance 4-disc minichanger." "\n\nOtherwise select Other CD-ROM.") ) (set #tp_ispd "\n\n\nIs your drive a Panasonic LF-1000 PD/CD-ROM drive?\n(combination read/write optical drive and CD-ROM drive)") (set #th_ispd (cat "\n\nIf you are using AsimCDFS with a Panasonic PD/CD-ROM drive, indicate this " "in your choice. This drive is a combination read/write optical drive and CD-ROM drive.\n\n" "This drive is also bundled under 3rd party names such as Smart & Friendly and Toray.\n\n" "\n\nOtherwise select Other CD-ROM.") ) (set #text_lf1000_users (cat "Panasonic LF-1000 PD/CD-ROM users\n" "---------------------------------\n" "Please ensure that your drive is set to the " "\"Two LUN Mode\". This is done via jumper switches " "on the back of the drive. Consult the manufacturer's " "documentation for further information.\n\n" "Also ensure that your SCSI controller is setup to " "recognize LUNs." ) ) (set #tp_is4x4 "\n\n\nIs your drive a NEC 4X4 4-disc ATAPI CD-ROM Changer?\n") (set #th_is4x4 (cat "\n\nIf you are using AsimCDFS with a NEC 4x4 ATAPI 4-disc CD-ROM Changer, indicate this " "in your choice. This drive is a 1/2 height 5 1/2\" device.\n\n " "\n\nOtherwise select Other CD-ROM.") ) (set #tp_separatepool "\n\nDo you wish to have separate devices mounted, or would you like all discs pooled into 1 device?\n\n") (set #th_separatepool (cat "\n\nIf you wish to have access to all discs simultaneously, then " "select Separate, otherwise select Pooled -- in the latter case, " "you can switch between the discs with DiscChanger.") ) (set #tc_separate "Separate") (set #tc_pooled "Pooled") (set #text_ourhelp_pioneer (cat "\n\nThis is the base name under which AmigaDOS will reference the " "CD-ROM as. As you are installing AsimCDFS for a Pioneer 6-disc changer " ", 6 such devices named 0 through 5 will be mounted (ie. CD0, CD1, ..., CD5) " "\n\nThe trailing : (colon) or the 0 through 5 MUST NOT be present.") ) (set #text_ourhelp_nakamichi (cat "\n\nThis is the base name under which AmigaDOS will reference the " "CD-ROM as. As you are installing AsimCDFS for a Nakamichi 7-disc changer " ", 7 such devices named 0 through 6 will be mounted (ie. CD0, CD1, ..., CD6) " "\n\nThe trailing : (colon) or the 0 through 6 MUST NOT be present.") ) (set #text_ourhelp_4x4 (cat "\n\nThis is the base name under which AmigaDOS will reference the " "CD-ROM as. As you are installing AsimCDFS for a 4-disc changer " ", 4 such devices named 0 through 3 will be mounted (ie. CD0, CD1, CD2 & CD3) " "\n\nThe trailing : (colon) or the 0 through 3 MUST NOT be present.") ) (set #tp_basedevice "\n\nWhat is the base-name for the AmigaDOS device?\n\n(The trailing colon MUST NOT be present. See manual for explanation.)") (set #tp_cddevice "\n\nWhat is the name for the AmigaDOS device?\n\n(The trailing colon MUST NOT be present)") (set #th_cddevice (cat "\n\nThis is the name under which AmigaDOS will reference the " "CD-ROM as. While usually CD0:, " "it can be any name you choose. " "\n\nThe trailing : (colon) MUST NOT be present.") ) (set #tp_copyasimatapi "\n\nCopying asim_atapi.device ATAPI CD-ROM driver\n") (set #th_copyasimatapi "\n\nThis will copy the asim_atapi.device ATAPI CD-ROM driver file to your devs: directory\n") (set #tp_runinquire "\n\nWould you like to use the SCSI Inquire utility to locate your CD-ROM drive?") (set #th_runinquire (cat "\n\nThe SCSI Inquire utility will scan your system for suitable SCSI " "or ATAPI devices and display a listing of all units connected to the device. " "Your CD-ROM drive must be powered-on and correctly connected " "for it to be acknowledged by this utility. Consult the SCSI Inquire " "chapter for more information.") ) (set #tp_devicename "\n\nWhat is the name of your SCSI or ATAPI device?") (set #th_devicename (cat "\n\nThis is the name of the device driver for your particular " "SCSI card. For example, the Commodore 2091/590/Amiga3000 has " "a name of \"scsi.device\" while our ATAPI driver has a name of \"asim_ide.device\".\n\n" "If you successfully ran the SCSI Inquire utility, this question will default to the correct unit number. " "Otherwise, consult either the AsimCDFS User's Guide or contact the controller card manufacturer.") ) (set #tp_unitnumber "\n\nWhat is the unit number of your CD-ROM drive?") (set #th_unitnumber (cat "\n\nThis is the unit # of the CD-ROM drive. This is usually a " "numerical value between 0j and 6 for SCSI units and between 0 and 1 for ATAPI units.\n\n" "If you successfully ran the SCSI Inquire utility, this question will default to the correct unit number. " "Otherwise, consult the CD-ROM drive documentation for instructions on " "determining the unit #.") ) (set #tp_automount "\n\nWould you like the CD-ROM drive automatically mounted upon bootup?") (set #th_automount "\n\nIf you would like, the appropriate commands will be added to your user-startup file to automatically mount AsimCDFS.\n") (set #tp_tunesdir "Specify the directory in which the AsimCDFS support programs will be placed:") (set #th_tunesdir "AsimCDFS contains a number of support programs. This directory will specifiy where the programs will be placed. If you need, create a separate directory for the files.") (set #tp_creatingdir "Creating the AsimCDFS: directory...") (set #th_creatingdir "This will create the specified directory for the support programs.") (set #tp_bufferdir "Specify the directory which can be used for buffering AsimCDFS files:") (set #th_bufferdir (cat "AsimCDFS will require a directory in which it will buffer " "various files, including PhotoCD thumbnail icons, snapshot icon files " "and audio library files. As the number of files in this directory " "may grow as your CD-ROM collection expands, it is " "advisable to put this directory on a large hard drive partition.") ) (set #tp_createbuffer "Creating the AsimCDFS_Buffer: directory...") (set #th_createbuffer "This will create the specified directory for the buffered files.") (set #tp_createsub1 "Creating the ") (set #tp_createsub2 " directory...") (set #th_createsub "This will create the specified directory for the buffered files.") (set #tp_copycorel "\n\nCopying Corel_Directory index file to the AsimCDFS_Buffer: directory.\n") (set #th_copycorel "\n\nThis will copy an index file containing proper disc names for the Corel ProPhoto library (Volumes 1 and 2).") (set #tp_copyviewtek "\n\nCopying the public domain program ViewTek by Thomas Krehbiel to your C: directory.") (set #th_copyviewtek (cat "\n\nThis will copy over the public domain viewing " "program ViewTek to your C: directory where it will be " "automatically used when you double-click on PhotoCD and " "Corel ProPhoto thumbnail icons.") ) (set #tp_deletephoto "\n\Deleting obsolete AsimPhoto.\n") (set #th_deletephoto (cat "\n\nThis will delete the old AsimPhoto program, which is " "no longer required for AsimCDFS v3.x\n") ) (set #tp_deleteprefs "\n\Deleting obsolete preferences files.\n") (set #th_deleteprefs (cat "\n\nThis will delete the old preferences files which are " "no longer required for AsimCDFS v3.x\n") ) (set #tp_copyasimcdfs "\n\nCopying AsimCDFS FileSystem to the l: directory.\n") (set #th_copyasimcdfs (cat"\n\nThis will copy over the AsimCDFS FileSystem program to your " "l: directory\n\nThis is an essential step in the installation " "process.\n") ) (set #tp_copycdfsdevice "\n\nCopying asimcdfs.device to the devs: directory.\n") (set #th_copycdfsdevice (cat "\n\nThis will copy over the asimcdfs.device program to your " "devs: directory\n\nThis is an essential step in the installation " "process.\n") ) (set #text_abort_atapiwb (cat "\n\nAmigaDOS 3.0 or higher is required for the asim_atapi.device. " "\n\nIf you are currently using an Amiga 1200 or Amiga 4000, check " "your libs:version.library file.\n\n" "\n\nYour libs:version.library file currently reports version ") ) (set #tp_insertmount "Inserting MOUNT commands into the startup-sequence") (set #th_insertmount1 "\n\nThe command \"MOUNT ") (set #th_insertmount2 (cat " FROM DEVS:MOUNTLIST.xxx\" is being inserted into your " "\"S:Startup-Sequence\" or \"S:User-Startup\" file to " "automatically start AsimCDFS upon bootup.") ) (set #tp_copymounticon "\n\nCopying Mountlist icon") (set #th_copymounticon "\n\nThis will copy over an icon for the mountlist file.") (set #tp_insertassign "Inserting Assign command into the startup-sequence") (set #th_insertassign "\n\nThe command assign AsimCDFS: and assign AsimCDFS_Buffer are being entered into your s:user-startup file.") (set #tp_deletemountlist "\n\Deleting obsolete MountList file from DEVS:DosDrivers/\n") (set #th_deletemountlist (cat "\n\nThis will delete the obsolete MountList file from the DEVS:DosDrivers/ directory. " "MountList files for AsimCDFS v3.x are now put into the SYS:Storage/DOSDrivers directory.\n") ) (set #tp_copyprefs "\n\nCopying default preferences file to the ENVArc:AsimCDFS directory.\n") (set #th_copyprefs "\n\nThis will copy over a default preferences file.") (set #tp_copytunes "\n\nShould the AsimTunes utility be installed?") (set #th_copytunes (cat "\n\nThis will copy over the AsimTunes utility " "to your AsimCDFS: directory\n\nIf you do not " "wish the AsimTunes program to be transferred to your system, " "skip this step.\n") ) (set #tp_copyingtunes "\n\nCopying AsimTunes audio CD controller program to the AsimCDFS: directory.\n") (set #tp_copytunesfont "\n\nCopying AsimTunes fonts to the FONTS: directory\n") (set #th_copytunesfont (cat "\n\nThis will copy over the fonts needed for AsimTunes.\n\n" "They will be placed into your fonts: directory.\n\n") ) (set #tp_copydc "\n\nShould the DiscChanger utility be installed?") (set #th_copydc (cat "\n\nThis will copy over the DiscChanger utility " "to your AsimCDFS: directory\n\nIf you do not " "wish the DiscChanger program to be transferred to your system, " "skip this step.\n") ) (set #tp_copyingdc "\n\nCopying the DiscChanger utility to the AsimCDFS: directory.\n") (set #tp_copypd "\n\nShould the PD_Format utility be installed?") (set #th_copypd (cat "\n\nThis will copy over the PD_Format utility " "to your AsimCDFS: directory\n\nIf you do not " "wish the PD_Format program to be transferred to your system, " "skip this step.\n") ) (set #tp_copyingdc "\n\nCopying the PD_Format utility to the AsimCDFS: directory.\n") (set #tp_copyasimprefs "\n\nShould the AsimCDFS_Prefs utility be installed?") (set #th_copyasimprefs (cat "\n\nThis will copy over the AsimCDFS_Prefs utility " "to your AsimCDFS: directory\n\nIf you do not " "wish the AsimCDFS_Prefs program to be transferred to your system, " "skip this step.\n") ) (set #tp_copyingasimprefs "\n\nCopying the AsimCDFS_Prefs utility to the AsimCDFS: directory.\n") (set #tp_copysimboot "\n\nShould the SimBoot utility be installed?") (set #th_copysimboot (cat "\n\nThis will copy over the SimBoot utility " "to your AsimCDFS: directory\n\nIf you do not " "wish the SimBoot program to be transferred to your system, " "skip this step.\n") ) (set #th_copyingsimboot "\n\nCopying the SimBoot utility to the AsimCDFS: directory.\n") (set #tp_copycd32prefs "\n\nShould the CD³²_Prefs utility be installed?") (set #th_copycd32prefs (cat "\n\nThis will copy over the CD³²_Prefs utility " "to your AsimCDFS: directory\n\nIf you do not " "wish the CD³²_Prefs program to be transferred to your system, " "skip this step.\n") ) (set #tp_copyingcd32prefs "\n\nCopying the CD³²_Prefs utility to the AsimCDFS: directory.\n") (set #tp_copycdtvprefs "\n\nShould the CDTV_Prefs utility be installed?") (set #th_copycdtvprefs (cat "\n\nThis will copy over the CDTV_Prefs utility " "to your AsimCDFS: directory\n\nIf you do not " "wish the CDTV_Prefs program to be transferred to your system, " "skip this step.\n") ) (set #tp_copyingcdtvprefs "\n\nCopying the CDTV_Prefs utility to the AsimCDFS: directory.\n") (set #tp_copycdtvemul "\n\nShould the CDTV emulation option be installed?") (set #th_copycdtvemul (cat "\n\nThis will copy over the required files for the " "CDTV emulation:\n devs:cdtv.device\n devs:bookmark.device\n devs:cardmark.device\n libs:playerprefs.library\n\nIf you do not " "wish the CDTV emulation option to be transferred to your system, " "skip this step.\n") ) (set #tp_copycdtvdevice "\n\nCopying cdtv.device to the devs: directory.\n") (set #tp_copybookmark "\n\nCopying bookmark.device to the devs: directory.\n") (set #tp_copycardmark "\n\nCopying cardmark.device to the devs: directory.\n") (set #tp_copyplayerprefs "\n\nCopying playerprefs.library to the libs: directory.\n") (set #tp_copycd32emul "\n\nShould the CD³² emulation option be installed?") (set #th_copycd32emul (cat "\n\nThis will copy over the required files for the " "CD³² emulation:\n devs:cd.device\n libs:nonvolatile.library\n libs:lowlevel.library\n\nIf you do not " "wish the CD³² emulation option to be transferred to your system, " "skip this step.\n") ) (set #tp_copycddevice "\n\nCopying cd.device to the devs: directory.\n") (set #tp_copynv "\n\nCopying nonvolatile.library to the libs: directory.\n") (set #tp_copylowlevel "\n\nCopying lowlevel.library to the libs: directory.\n") (set #tp_makeenvarc "Making the ENVARC:AsimCDFS directory, in which various default files will be placed.") (set #th_makeenvarc "This will create a directory in your ENVARC: directory") (set #tp_makeenv "Making the ENV:AsimCDFS directory, in which various default files will be placed.") (set #th_makeenv "This will create a directory in your ENV: directory") (set #tp_copyicons "\n\nCopying default icons to the ENVARC: and ENV:AsimCDFS directory.\n") (set #th_copyicons "\n\nThis will copy over default icon files to the ENVArc: and ENV:AsimCDFS directory.") (set #tp_catalogs "Which alternate language catalogs would you like installed?") (set #th_catalogs (cat "The various programs have been configured to the following " "alternate languages:\n Français, Italiano and Deutsch\n\nSelect which" "languages you would like to use with our software. English " "language support is automatically provided as standard within the software.") ) (set #tp_copylocale1 "\n\nCopying locale ") (set #tp_copylocale2 " language catalogs.\n") (set #th_copylocale "\n\nThis will copy over the desired langauge file.") (set #text_message_flyer (cat "NewTek Flyer users\n" "------------------\n" "Your CD-ROM drive will not be automatically started upon bootup.\n\n" "To manually start your CD-ROM drive, you must double-click on the " "CD6 icon located in the Storage/DOSDrivers directory on your " "Workbench partition.\n\n" "You may wish to leave out the CD6 icon on your Workbench screen " "using the \"Leave Out\" menu item in Workbench." ) ) (set #text_message_extendedicons (cat "NewIcons and MagicWB users\n" "--------------------------------\n" "NewIcons and MagicWB icons are now available for " "the utilities in AsimCDFS. Due to space limitations, however, we " "are unable to include these on the install disk.\n\n" "This set of extended icons may be found on our WWW site at " "http://www.asimware.com, on our BBS or on the Aminet archive." ) ) )) ;***** ; set German language strings (if (= #our_language #Deutsch) ( (set #echotxt "echo \"AsimCDFS wird angemeldet...\"\n") (set #text_please_use_novice (cat "Anmerkung zur Installation\n" "--------------------------\n\n" "Wir haben Probleme mit dem Installer bemerkt, " "wenn die Modi 'geübter Benutzer' oder 'Experte' " "benutzt werden. Es wird dringend empfohlen, nur " "im Modus 'Einsteiger' zu installieren.\n" ) ) (set #text_needwb_2 (cat "\n\nAsimCDFS 3.x benötigt AmigaDOS 2.0 oder höher. " "\n\nSie müssen Ihr Betriebssystem aktualisieren." "\n\nMomentan benutzen Sie Version " #wbversion "." )) (set #tp_insert_disk "Bitte legen Sie die Diskette \"AsimCDFS_v3_Install\" ein.") (set #th_insert_disk (cat "AsimCDFS und andere Hilfsprogramme werden von dieser " "Diskette auf Ihr System kopiert.") ) (set #text_abort1 "\n\nEs werden ungefähr " ) (set #text_abort2 "KB freier Platz auf Ihrer Bootpartition benötigt.\n\nSie haben nur ") (set #text_abort3 "KB frei.\n\nLöschen oder verschieben Sie Dateien von Ihrer Bootpartition und versuchen Sie es erneut.") (set #tp_isamiga "\nAsimCDFS v3.9a Installation\n---------------------------\n\Bitte geben Sie Ihre Konfiguration an:") (set #th_isamiga (cat "\n\nWenn AsimCDFS zusammen mit einem CDTV/A570 benutzt wird, dann " "geben Sie bitte CDTV/A570 an.\n\n" "Wenn AsimCDFS mit einem CD³² benutzt wird, dann wählen Sie bitte CD³² aus.\n\n" "Andernfalls wird AsimCDFS für einen Amiga mit SCSI- oder ATAPI-Controller " "mit einem passenden CD-ROM-Laufwerk installiert.") ) (set #tc_isamiga_1 "Amiga mit SCSI CD-ROM-Laufwerk") (set #tc_isamiga_2 "CDTV/A570") (set #tc_isamiga_3 "CD³²") (set #tc_isamiga_4 "ATAPI CD-ROM-Laufwerk am A4000/A1200") (set #tc_isamiga_5 "NewTek Flyer mit CD-ROM (Unit 6) an SCSI") (set #tp_ispioneer "\n\n\nIst Ihr Laufwerk ein Pioneer DRM-60x?") (set #th_ispioneer (cat "\n\nFalls Sie AsimCDFS mit einem Pioneer DRM-60x benutzen wollen, " "treffen Sie bitte die entsprechende Auswahl. Dieses Laufwerk " "ist ein Hochleistungs-Diskwechsler für 6 CDs und ist nicht " "sehr verbreitet." "\n\nAndernfalls wählen Sie bitte 'anderes CD-ROM-Laufwerk'.") ) (set #tc_othercdrom "anderes CD-ROM-Laufwerk") (set #tp_isnakamichi "\n\n\nIst Ihr Laufwerk ein Nakamichi MBR-7,\nein NEC 4xc oder ein NEC 2cx Diskwechsler?" ) (set #th_isnakamichi (cat "\n\nFalls Sie AsimCDFS mit einem Nakamichi MBR-7, einem NEC 4xc oder einem NEC 2xc Diskwechsler benutzen wollen, " "treffen Sie bitte die entsprechende Wahl. Dieses Laufwerk ist ein" "Hochleistungs-Diskwechsler für 7 CDs und ist nicht sehr verbreitet." "\n\nAndernfalls wählen Sie bitte 'anderes CD-ROM-Laufwerk'.") ) (set #tp_isnakamichi4disc "\n\n\nIst Ihr Laufwerk ein Nakamichi MJ-4 Diskwechsler?" ) (set #th_isnakamichi4disc (cat "\n\nFalls Sie AsimCDFS mit einem Nakamichi MJ-4 Diskwechsler benutzen wollen, " "treffen Sie bitte die entsprechende Wahl. Dieses Laufwerk ist ein" "Hochleistungs-Diskwechsler für 4 CDs und ist nicht sehr verbreitet." "\n\nAndernfalls wählen Sie bitte 'anderes CD-ROM-Laufwerk'.") ) (set #tp_ispd "\n\n\nIst Ihr Laufwerk ein Panasonic LF-1000 PD/CD-ROM-Laufwerk?\n(Kombination aus optischem und CD-ROM-Laufwerk)" ) (set #th_ispd (cat "\n\nFalls Sie AsimCDFS mit einem Panasonic PD/CD-ROM-Laufwerk betreiben, " "treffen Sie bitte die entsprechende Wahl. Dieses Laufwerk ist eine Kombination aus einem " "optischen Laufwerk (mit Schreib- und Lesezugriff) und einem CD-ROM-Laufwerk.\n" "Dieses Gerät wird außerdem von Dritten angeboten unter Namen wie Smart & Friendly und Toray.\n\n" "\n\nAndernfalls wählen Sie bitte 'anderes CD-ROM-Laufwerk'.") ) (set #text_lf1000_users (cat "Anmerkung zum Panasonic LF-1000 PD/CD-ROM-Laufwerk\n" "--------------------------------------------------\n" "Bitte stellen Sie sicher, daß Ihr Laufwerk sich im " "\"Two LUN Mode\" befindet. Dies wird mittels Steckbrücken " "an der Rückseite des Laufwerks eingestellt. Näheres " "finden Sie in der Dokumentation, die dem Laufwerk beiliegt.\n\n" "Bitte stellen Sie außerdem sicher, daß Ihr SCSI-Controller " "die Erkennung von LUNs unterstützt." ) ) (set #tp_is4x4 "\n\n\nIst Ihr Laufwerk ein NEC4x4 ATAPI Diskwechsler?\n" ) (set #th_is4x4 (cat "\n\nFalls Sie AsimCDFS mit einem NEC 4x4 ATAPI Diskwechsler benutzen, treffen Sie bitte " "die entsprechende Auswahl.\n\n" "\n\nAndernfalls wählen Sie bitte 'anderes CD-ROM-Laufwerk'.") ) (set #tp_separatepool "\n\nMöchten Sie getrennte Geräte anmelden oder alle CD-ROMs als EIN Gerät behandeln?\n\n") (set #th_separatepool (cat "\n\nFalls Sie Zugriff auf alle CD-ROMs gleichzeitig wünschen, wählen " "Sie bitte 'getrennt', andernfalls 'zusammen' - bei letzterem " "können Sie mit dem DiscChanger zwischen den CD-ROMs wechseln.") ) (set #tc_separate "getrennt") (set #tc_pooled "zusammen") (set #text_ourhelp_pioneer (cat "\n\nDies ist der Basisname, unter dem AmigaDOS die einzelnen CD-ROMs " "anspricht. Da Sie AsimCDFS für einen Pioneer 6-fach-Wechsler installieren, " "werden 6 Geräte von 0 bis 5 angemeldet (CD0, CD1, ..., CD5). " "\n\nEs darf kein abschließender Doppelpunkt oder die 0 bis 5 vorhanden sein.") ) (set #text_ourhelp_nakamichi (cat "\n\nDies ist der Basisname, unter dem AmigaDOS die einzelnen CD-ROMs " "anspricht. Da Sie AsimCDFS für einen Nakamichi 7-fach-Wechsler installieren, " "werden 7 Geräte von 0 bis 6 angemeldet (CD0, CD1, ..., CD6). " "\n\nEs darf kein abschließender Doppelpunkt oder die 0 bis 6 vorhanden sein.") ) (set #text_ourhelp_4x4 (cat "\n\nDies ist der Basisname, unter dem AmigaDOS die einzelnen CD-ROMs " "anspricht. Da Sie AsimCDFS für einen NEC 4x4 4-fach-Wechsler installieren, " "werden 7 Geräte von 0 bis 3 angemeldet (CD0, CD1, CD2 und CD3). " "\n\nEs darf kein abschließender Doppelpunkt oder die 0 bis 3 vorhanden sein.") ) (set #tp_basedevice "\n\nWelchen Basisnamen soll das AmigaDOS-Gerät erhalten?\n\n(Es darf kein abschließender Doppelpunkt vorhanden sein.)") (set #tp_cddevice "\n\nWelchen Namen soll das AmigaDOS-Gerät erhalten?\n\n(Es darf kein abschließender Doppelpunkt vorhanden sein.)") (set #th_cddevice (cat "\n\nUnter diesem Namen wird AmigaDOS das CD-ROM-Laufwerk ansprechen. " "Gebräuchlich ist CD0, Sie können aber auch einen beliebigen anderen Namen wählen. " "\n\nEs darf kein abschließender Doppelpunkt vorhanden sein.") ) (set #tp_copyasimatapi "\n\nDatei 'asim_atapi.device' kopieren\n") (set #th_copyasimatapi "\n\nDer ATAPI CD-ROM-Treiber asim_atapi.device wird in das Verzeichnis DEVS: kopiert.\n") (set #tp_runinquire "\n\nMöchten Sie das Hilfsprogramm SCSI Inquire benutzen, um Ihr CD-ROM-Laufwerk zu finden?") (set #th_runinquire (cat "\n\nDas Hilfsprogramm SCSI Inquire sucht Ihr System nach passenden " "SCSI- oder ATAPI-Controllern ab und zeigt eine Liste aller angeschlossenen Geräte. " "Ihr CD-ROM-Laufwerk muß korrekt angeschlossen und eingeschaltet sein, sonst " "kann es vom Programm nicht erkannt werden.") ) (set #tp_devicename "\n\nWie heißt Ihr SCSI- oder ATAPI-Treiber?" ) (set #th_devicename (cat "\n\nBitte geben Sie den Namen des Treibers Ihres SCSI-Controllers " "ein. Die Geräte A2091/A590 und der Amiga 3000 z.B. benutzen " "\"scsi.device\", unser ATAPI-Treiber heißt \"asim_atapi.device\".\n\n" "Wenn Sie das Hilfsprogramm SCSI Inquire richtig benutzt haben, dann steht im Eingabefeld bereits " "der korrekte Name. Andernfalls ziehen Sie bitte die beigefügte Dokumentation zu Rate.") ) (set #tp_unitnumber "\n\nUnter welcher Gerätenummer wird Ihr Laufwerk angesprochen?" ) (set #th_unitnumber (cat "\n\nBitte geben Sie die Gerätenummer Ihres CD-ROM-Laufwerks an. " "Dies ist in der Regel eine Nummer zwischen 0 und 6 bei SCSI und zwischen 0 und 1 " "bei ATAPI-Geräten.\n\n" "Wenn Sie das Hilfsprogramm SCSI Inquire richtig benutzt haben, dann steht im Eingabefeld bereits " "die korrekte Gerätenummer. Andernfalls ziehen Sie bitte die beigefügte Dokumentation zu Rate.") ) (set #tp_automount "\n\nSoll das CD-ROM-Laufwerk beim Hochfahren automatisch angemeldet werden?" ) (set #th_automount "\n\nWenn Sie es wünschen, werden die benötigten Befehle in der Datei User-Startup eingebunden, um AsimCDFS automatisch anzumelden.\n" ) (set #tp_tunesdir "Bitte geben Sie an, in welches Verzeichnis die Hilfsprogramme von AsimCDFS kopiert werden sollen:" ) (set #th_tunesdir "AsimCDFS beinhaltet zahlreiche Hilfsprogramme. Hier legen Sie fest, in welches Verzeichnis sie kopiert werden. Falls nötig, erstellen Sie bitte ein eigenes Verzeichnis.") (set #tp_creatingdir "Das Verzeichnis AsimCDFS: wird angelegt..." ) (set #th_creatingdir "Es wird das angegebene Verzeichnis für die Hilfsprogramme angelegt.") (set #tp_bufferdir "Bitte geben Sie das Verzeichnis für die AsimCDFS-Puffer an:") (set #th_bufferdir (cat "AsimCDFS benötigt ein Verzeichnis, in dem verschiedene Dateien " "gepuffert werden können. Dazu gehören Thumbnail-Piktogramme für " "PhotoCDs, fixierte Piktogramme und Audio-Kataloge. Da die Anzahl der " "Dateien in diesem Verzeichnis mit Ihrer CD-ROM-Sammlung wächst, wird " "empfohlen, es möglichst auf einer Partition mit viel Platz einzurichten.") ) (set #tp_createbuffer "Das Pufferverzeichnis für AsimCDFS wird eingerichtet..." ) (set #th_createbuffer "Das angegebene Verzeichnis für die Pufferung von Daten wird angelegt." ) (set #tp_createsub1 "Das Verzeichnis " ) (set #tp_createsub2 " wird angelegt..." ) (set #th_createsub "Das angegebene Verzeichnis für die Pufferung von Daten wird angelegt." ) (set #tp_copycorel (cat "\n\nDie Indexdatei Corel_Directory wird in das " "AsimCDFS-Pufferverzeichnis (AsimCDFS_Buffer:) kopiert.\n") ) (set #th_copycorel (cat "\n\nEine Indexdatei mit passenden Disknamen für die Corel ProPhoto " "Library (Vol. 1 und 2) wird kopiert.") ) (set #tp_copyviewtek (cat "\n\nDas frei vertreibbare Programm ViewTek " "von Thomas Krehbiel wird ins Verzeichnis C: kopiert.") ) (set #th_copyviewtek (cat "\n\nDas frei vertreibbare Bildanzeigeprogramm ViewTek " "wird in Ihr Verzeichnis C: kopiert. Dort wird es automatisch " "aufgerufen, wenn Sie auf Thumbnail-Piktogramme von PhotoCDs " "oder Corel ProPhoto-CDs klicken.") ) (set #tp_deletephoto "\n\Das überflüssige Programm AsimPhoto wird gelöscht.\n" ) (set #th_deletephoto (cat "\n\nDas alte AsimPhoto-Programm wird von AsimCDFS 3.x " "nicht mehr benötigt und kann gelöscht werden.\n") ) (set #tp_deleteprefs "\n\Überflüssige Voreinstellungen für AsimCDFS werden gelöscht.\n") (set #th_deleteprefs (cat "\n\nDie alte Voreinstellungsdatei für AsimCDFS wird von " "AsimCDFS 3.x nicht mehr benötigt und kann gelöscht werden.\n") ) (set #tp_copyasimcdfs "\n\nDas AsimCDFS Filesystem wird ins Verzeichnis L: kopiert.\n") (set #th_copyasimcdfs (cat "\n\nDas AsimCDFS Filesystem wird in Ihr Verzeichnis L: kopiert.\n\n" "Dies ist ein wesentlicher Schritt bei der Installation und sollte " "keinesfalls ausgelassen werden.\n") ) (set #tp_copycdfsdevice "\n\nDie Datei asimcdfs.device wird ins Verzeichnis DEVS: kopiert.\n") (set #th_copycdfsdevice (cat "\n\nDie Datei asimcdfs.device wird in Ihr Verzeichnis DEVS: kopiert.\n\n" "Dies ist ein wesentlicher Schritt bei der Installation und sollte " "keinesfalls ausgelassen werden.\n") ) (set #text_abort_atapiwb (cat "\n\nFür das asim_atapi.device wird AmigaDOS 3.0 oder höher benötigt. " "\n\nFalls Sie einen Amiga 1200 oder Amiga 4000 benutzen, überprüfen " "Sie bitte die Datei LIBS:version.library.\n\n" "\n\nMomentan liegt LIBS:version.library in der Version " #wbversion " vor.") ) (set #tp_insertmount "Der MOUNT-Befehl wird in die Startup-Sequence eingefügt...") (set #th_insertmount1 "\n\nDer Befehl \"MOUNT " ) (set #th_insertmount2 (cat " FROM DEVS:MOUNTLIST.xxx\" wird in die " "\"S:Startup-Sequence\" oder \"S:User-Startup\" eingefügt, " "um AsimCDFS beim Hochfahren automatisch zu starten.") ) (set #tp_copymounticon "\n\nDas Piktogramm für die Mountlist wird kopiert") (set #th_copymounticon "\n\nDas Piktogramm für die Mountlist-Datei wird kopiert.") (set #tp_insertassign "Zuweisungen werden in die User-Startup eingefügt") (set #th_insertassign "\n\nDie Befehle ASSIGN AsimCDFS: und ASSIGN AsimCDFS_Buffer werden in die Datei S:User-Startup eingefügt." ) (set #tp_deletemountlist "\n\Die überflüssige Mountlist in DEVS:DOSDrivers/ wird gelöscht\n") (set #th_deletemountlist (cat "\n\nDie überflüssige Mountlist in DEVS:DOSDrivers/ wird gelöscht. Die Mountlists " "für AsimCDFS 3.x werden nun in SYS:Storage/DOSDrivers/ abgelegt.\n") ) (set #tp_copyprefs "\n\nStandardeinstellungen werden ins Verzeichnis ENVARC:AsimCDFS kopiert.\n" ) (set #th_copyprefs "\n\nEine Standard-Voreinstellungsdatei wird kopiert." ) (set #tp_copytunes "\n\nSoll das Hilfsprogramm AsimTunes installiert werden?") (set #th_copytunes (cat "\n\nHiermit wird das Hilfsprogramm AsimTunes " "in das Verzeichnis AsimCDFS: kopiert.\n\n" "Falls Sie AsimTunes nicht installieren möchten, " "überspringen Sie diesen Schritt.\n") ) (set #tp_copyingtunes (cat "\n\nDas CD-Audio-Programm AsimTunes wird in das Verzeichnis " "AsimCDFS: kopiert.\n") ) (set #tp_copytunesfont "\n\nDie Zeichensätze für AsimTunes werden nach FONTS: kopiert\n" ) (set #th_copytunesfont (cat "\n\nHiermit werden die von AsimTunes benötigten Zeichensätzte kopiert.\n\n" "Sie werden in das Verzeichnis FONTS: übertragen.\n\n") ) (set #tp_copydc "\n\nSoll das Hilfsprogramm DiscChanger installiert werden?" ) (set #th_copydc (cat "\n\nHiermit wird das Hilfsprogramm DiskChanger " "in das Verzeichnis AsimCDFS: kopiert.\n\n" "Falls Sie DiscChanger nicht installieren möchten, " "überspringen Sie diesen Schritt.\n") ) (set #tp_copyingdc "\n\nDas Hilfsprogramm DiscChanger wird ins Verzeichnis AsimCDFS: kopiert.\n" ) (set #tp_copypd "\n\nSoll das Hilfsprogramm PD_Format installiert werden?" ) (set #th_copypd (cat "\n\nHiermit wird das Hilfsprogramm PD-Format " "in das Verzeichnis AsimCDFS: kopiert.\n\n" "Falls Sie PD_Format nicht installieren möchten, " "überspringen Sie diesen Schritt.\n") ) (set #tp_copyingdc "\n\nDas Hilfsprogramm PD-Format wird ins Verzeichnis AsimCDFS: kopiert.\n" ) (set #tp_copyasimprefs "\n\nSoll das Voreinstellerprogramm AsimCDFS_Prefs installiert werden?" ) (set #th_copyasimprefs (cat "\n\nHiermit wird das Voreinstellerprogramm AsimCDFS_Prefs " "ins Verzeichnis AsimCDFS: kopiert.\n\n" "Falls Sie AsimCDFS_Prefs nicht installieren möchten, " "überspringen Sie diesen Schritt.\n") ) (set #tp_copyingasimprefs "\n\nDas Voreinstellerprogramm AsimCDFS_Prefs wird ins Verzeichnis AsimCDFS: kopiert.\n" ) (set #tp_copysimboot "\n\nSoll das Hilfsprogramm SimBoot installiert werden?" ) (set #th_copysimboot (cat "\n\nHiermit wird das Hilfsprogramm SimBoot " "ins Verzeichnis AsimCDFS: kopiert.\n\n" "Falls Sie SimBoot nicht installieren möchten, " "überspringen Sie diesen Schritt.\n") ) (set #th_copyingsimboot "\n\nDas Hilfsprogramm SimBoot wird ins Verzeichnis AsimCDFS: kopiert.\n" ) (set #tp_copycd32prefs "\n\nSoll das Voreinstellungsprogramm CD³²_Prefs installiert werden?" ) (set #th_copycd32prefs (cat "\n\nHiermit wird das Voreinstellungsprogramm " "CD³²_Prefs ins Verzeichnis AsimCDFS: kopiert.\n\n" "Falls Sie CD³²_Prefs nicht installieren möchten, " "überspringen Sie diesen Schritt\n") ) (set #tp_copyingcd32prefs "\n\nDas Voreinstellungsprogramm CD³²_Prefs wird ins Verzeichnis AsimCDFS: kopiert.\n" ) (set #tp_copycdtvprefs "\n\nSoll das Voreinstellerprogramm CDTV_Prefs installiert werden?" ) (set #th_copycdtvprefs (cat "\n\nHiermit wird das Voreinstellerprogramm " "CDTV_Prefs ins Verzeichnis AsimCDFS: kopiert.\n\n" "Falls Sie CDTV_Prefs nicht installieren möchten, " "überspringen Sie diesen Schritt.\n") ) (set #tp_copyingcdtvprefs "\n\nDas Voreinstellerprogramm CDTV_Prefs wird ins Verzeichnis AsimCDFS: kopiert.\n" ) (set #tp_copycdtvemul "\n\nSoll die CDTV-Emulation installiert werden?" ) (set #th_copycdtvemul (cat "\n\nHiermit werden die benötigten Dateien für " "die CDTV-Emulation kopiert:\n DEVS:cdtv.device\n DEVS:bookmark.device\n DEVS:cardmark.device\n LIBS:playerprefs.library\n\n" "Falls Sie die CDTV-Emulation nicht installieren möchten, " "überspringen Sie diesen Schritt.\n") ) (set #tp_copycdtvdevice "\n\nDatei cdtv.device wird ins Verzeichnis DEVS: kopiert.\n" ) (set #tp_copybookmark "\n\nDatei bookmark.device wird ins Verzeichnis DEVS: kopiert.\n" ) (set #tp_copycardmark "\n\nDatei cardmark.device wird ins Verzeichnis DEVS: kopiert.\n" ) (set #tp_copyplayerprefs "\n\nDatei playerprefs.library wird ins Verzeichnis LIBS: kopiert.\n") (set #tp_copycd32emul "\n\nSoll die CD³²-Emulation installiert werden?") (set #th_copycd32emul (cat "\n\nHiermit werden die benötigten Dateien für die " "CD³²-Emulation kopiert:\n DEVS:cd.device\n LIBS:nonvolatile.library\n LIBS:lowlevel.library\n\n" "Falls Sie die CD³²-Emulation nicht installieren möchten, " "überspringen Sie diesen Schritt.\n") ) (set #tp_copycddevice "\n\nDatei cd.device wird ins Verzeichnis DEVS: kopiert.\n" ) (set #tp_copynv "\n\nDatei nonvolatile.library wird ins Verzeichnis LIBS: kopiert.\n" ) (set #tp_copylowlevel "\n\nDatei lowlevel.library wird ins Verzeichnis LIBS: kopiert.\n") (set #tp_makeenvarc "Verzeichnis ENVARC:AsimCDFS für die Standardeinstellungen wird erstellt." ) (set #th_makeenvarc "Hiermit wird ein Unterverzeichnis im Verzeichnis ENVARC: angelegt." ) (set #tp_makeenv "Verzeichnos ENV:AsimCDFS für die Einstellungen wird erstellt." ) (set #th_makeenv "Hiermit wird ein Unterverzeichnis im Verzeichnis ENV: angelegt." ) (set #tp_copyicons "\n\nStandardpiktogramme werden ins Verzeichnis ENVARC:AsimCDFS kopiert.\n") (set #th_copyicons "\n\nHiermit werden Standardpiktogramme ins Verzeichnis ENVARC/ENV:AsimCDFS kopiert." ) (set #tp_catalogs "Welche Sprachen sollen installiert werden?" ) (set #th_catalogs (cat "Die verschiedenen Programme wurden in folgende Sprachen " "übersetzt:\n\n Französisch, Italienisch und Deutsch\n\n" "Wählen Sie bitte, welche Sprachen Sie benutzen wollen. " "Englisch wird automatisch als Standard von der Software benutzt.") ) (set #tp_copylocale1 "\n\nSprachkataloge " ) (set #tp_copylocale2 " werden kopiert.\n" ) (set #th_copylocale "\n\nHiermit wird die gewünschte Sprache installiert.") (set #text_message_flyer (cat "Benutzer des NewTek Flyers\n" "--------------------------\n" "Ihr CD-ROM-Laufwerk wird nicht automatisch beim Hochfahren angemeldet.\n\n" "Um das Gerät von Hand anzumelden, klicken Sie bitte das Piktogramm CD6 " "im Verzeichnis Storage/DOSDrivers auf Ihrer Bootpartition " "doppelt an.\n\n" "Sie sollten das CD6-Piktogramm eventuell auf Ihrer Workbench auslagern " "(mit dem Eintrag \"Auslagern\" im Menü)." ) ) (set #text_message_extendedicons (cat "Benutzer von NewIcons und MagicWB\n" "---------------------------------\n" "Für die AsimCDFS-Hilfsprogramme sind jetzt auch NewIcons- und " "MagicWB-Piktogramme erhältlich. Leider ist es wegen des " "beschränkten Platzes nicht möglich, diese Piktogramme auf " "der Installationsdiskette unterzubringen.\n\n" "Die Piktogramme können Sie aber auf unserer WWW-Seite " "http://www.asimware.com, in unserer Mailbox oder im Aminet finden." )) )) (complete 0) ;***** ; Please! Use Novice! (if (> @user-level 0) (message #text_please_use_novice) ) ;***** ; Need WB 2.0 or higher. (if (< #wbversion 37) (abort #text_needwb_2) ) ;***** ; Lock our install disk (askdisk (prompt #tp_insert_disk) (help #th_insert_disk) (dest "AsimCDFS_v3_Install") (newname "AsimCDFSInst") ) ;***** ; Need lots of space on sys volume for devs, l, etc. ; assume about: 55K for asimcdfs.device ; 110K for AsimCDFS (set #installsize 168960) (set #installsize (+ #installsize (getsize "AsimCDFSInst:devs/asim_atapi.device") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:AsimTunes") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:DiscChanger") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:AsimCDFS_Prefs") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:SimBoot") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:PD_Format") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:CD³²_Prefs") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:CDTV_Prefs") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:DefaultCDFS_Prefs.info") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:DefaultCDTV_Prefs.info") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:Audio_Track.info") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:Audio_Disk.info") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:Audio_Drawer.info") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:PhotoCD_Disk.info") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:PhotoCD_Drawer.info") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:Raw_Sector.info") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:Raw_Disk.info") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:MPEG_Track.info") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:MPEG_Disk.info") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:DefaultCD³²_Prefs.info") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:Storage/DOSDrivers/CD0") )) (set #installsize (+ #installsize (getsize "AsimCDFSInst:Storage/DOSDrivers/CD0.info") )) (if (< (getdiskspace "SYS:") #installsize) (abort #text_abort1 (/ #installsize 1024) #text_abort2 (/ (getdiskspace "SYS:") 1024) #text_abort3 ) ) (user 2) (complete 3) ;***** ; Ask if CDTV (1) , CD³² (2) or Amiga (0) (set #IsAmiga (askchoice (prompt #tp_isamiga ) (default 0 ) (choices #tc_isamiga_1 #tc_isamiga_2 #tc_isamiga_3 #tc_isamiga_4 #tc_isamiga_5 ) (help #th_isamiga ) ) ) (complete 6) ;***** ; Is CDTV (if (= #IsAmiga #typeCDTV) ((set #CDDefault_NC "CD1" ) (set #SCSIDevice "cdtv.device") (set #SCSIUnit 0) ) ) ;***** ; Is CD³² (if (= #IsAmiga #typeCD32) ((set #CDDefault_NC "CD1" ) (set #SCSIDevice "cd.device") (set #SCSIUnit 0) ) ) ;***** ; Flyer (if (= #IsAmiga #typeFLYER) (set #CDDefault_NC "CD6" ) ) ;***** ; If amiga, ask if using Pioneer or other (if (= #IsAmiga #typeAMIGA) (set #isPioneer (askbool (prompt #tp_ispioneer ) (default 0) (choices "Pioneer DRM-60x" #tc_othercdrom) (help #th_ispioneer ) ) ) ) ;***** ; If ispioneer==0, ask if using Nakamichi or other (if (and (= #isPioneer 0) (= #IsAmiga #typeAMIGA)) (set #isNakamichi (askbool (prompt #tp_isnakamichi ) (default 0) (choices "MBR-7 / NEC 2xc, 4xc" #tc_othercdrom) (help #th_isnakamichi ) ) ) ) ;***** ; If ispioneer==0 & isnakamichi==0, ask if using nak4disc or other (if (and (= #isNakamichi 0) (and (= #isPioneer 0) (= #IsAmiga #typeAMIGA)) ) (set #isNakamichi4Disc (askbool (prompt #tp_isnakamichi4disc ) (default 0) (choices "MJ-4" #tc_othercdrom) (help #th_isnakamichi4disc ) ) ) ) ;***** ; If ispioneer==0 & isnakamichi==0, isnakamichi4disc==0 ask if using PD/CD-ROM or other (if (and (= #isNakamichi 0) (and (= #isPioneer 0) (and (= #isNakamichi4Disc 0) (= #IsAmiga #typeAMIGA))) ) (set #isPDCD (askbool (prompt #tp_ispd ) (default 0) (choices "LF-1000 PD/CD-ROM" #tc_othercdrom) (help #th_ispd ) ) ) ) (if (= #isPDCD 1) (message #text_lf1000_users ) ) ;***** ; If is atapi, then ask if it is a 4x4 (if (= #IsAmiga #typeATAPI) (set #is4X4 (askbool (prompt #tp_is4x4 ) (default 0) (choices "NEC 4X4" #tc_othercdrom) (help #th_is4x4 ) ) ) ) (complete 9) (if (or #is4X4 (or #isPioneer (or #isNakamichi4Disc #isNakamichi))) ( ;***** ; ask if Pioneer/Nakamichi/NEC is separate or pooled (set #PioneerSeparate (askbool (prompt #tp_separatepool ) (default 0 ) (choices #tc_separate #tc_pooled) (help #th_separatepool ) ) ) ;***** ; If pioneer separate, ask for base name (if #PioneerSeparate ((if #isPioneer (set #ourhelp #text_ourhelp_pionner ) ) (if #isNakamichi (set #ourhelp #text_ourhelp_nakamichi ) ) (if (or #is4X4 #isNakamichi4Disc) (set #ourhelp #text_ourhelp_4x4 ) ) (set #CDDevice_NC (askstring (prompt #tp_basedevice ) (default "CD" ) (help #ourhelp) ) ) (set #CDDevice (cat #CDDevice_NC "0:"))) ) ) ) ;***** ; If pioneer pooled or other CD-ROM, ask for CD0 device alternate (if (not #PioneerSeparate) ((set #CDDevice_NC (askstring (prompt #tp_cddevice ) (default #CDDefault_NC ) (help #th_cddevice ) ) ) (set #CDDevice (cat #CDDevice_NC ":") )) ) ;***** ; Copy over asim_atapi.device (if (= #IsAmiga #typeATAPI) ((user #theirlevel) (copyfiles (prompt #tp_copyasimatapi ) (source "AsimCDFSInst:devs/asim_atapi.device") (dest "DEVS:") (confirm) (help #th_copyasimatapi) ) (user 2) ) ) ;***** ; Ask to run SCSI Inquire (if (or (= #IsAmiga #typeAMIGA) (= #IsAmiga #typeATAPI)) (set #useInquire (askbool (prompt #tp_runinquire ) (default 1 ) (help #th_runinquire ) ) ) ) ;***** ; Run SCSI Inquire (if #useInquire ( (if (= #IsAmiga #typeATAPI) (run "AsimCDFS_v3_Install:SCSI_Inquire force_atapi") ) (if (= #IsAmiga #typeAMIGA) (run "AsimCDFS_v3_Install:SCSI_Inquire") ) (if (exists "ENV:SCSI_Device") ((set #SCSIDevice (getenv "SCSI_Device")) (set #SCSIUnit (+ (getenv "SCSI_Unit"))) )) ) ) ;***** ; The LF-1000 PD/CD-ROM drive uses LUN #1 for the CD-ROM operation (if (= #isPDCD 1) (set #SCSIUnit (+ 10 #SCSIUnit)) ) (complete 12) (if (= #IsAmiga #typeAMIGA) ;***** ; Ask for device name ((set #SCSIDevice (askstring (prompt #tp_devicename ) (default #SCSIDevice ) (help #th_devicename ) ) ) (complete 15) ;**** ; Ask for unit number (set #SCSIUnit (asknumber (prompt #tp_unitnumber ) (default #SCSIUnit ) (help #th_unitnumber ) ) )) ) ;***** ; Ask for automount? (complete 18) (if (not (= #IsAmiga #typeFLYER)) (set #autoMount (askbool (prompt #tp_automount ) (help #th_automount) (default 1) ) ) ) (if (= #IsAmiga #typeFLYER) ((set #autoMount 0) (set #SCSIUnit 206) (set #SCSIDevice "flyerscsi.device")) ) (set #mountDirectory "sys:storage/DOSDrivers/") ;***** ; Ask for AsimCDFS: (set #tunesDir (askdir (prompt #tp_tunesdir ) (help #th_tunesdir) (default @default-dest) (newpath) ) ) (if (not (exists #tunesDir (noreq))) (makedir #tunesDir (prompt #tp_creatingdir) (help #th_creatingdir) (infos) ) ) (makeassign "AsimCDFS" #tunesDir) ;***** ; Ask for AsimCDFS_Buffer: (set #bufferDir "Work:AsimCDFS_Buffer") (run "AsimCDFS_v3_Install:c/MostFree") (if (exists "ENV:MostFree") (set #bufferDir (cat (getenv "MostFree") "AsimCDFS_Buffer")) ) (if (= #IsAmiga #typeFLYER) (if (exists "WORK:" (noreq)) (set #bufferDir "WORK:AsimCDFS_Buffer") (set #bufferDir "SYS:AsimCDFS_Buffer") ) ) (set #bufferDir (askdir (prompt #tp_bufferdir ) (help #th_bufferdir ) (default #bufferDir ) (newpath) ) ) (if (not (exists #bufferDir (noreq))) (makedir #bufferDir (prompt #tp_createbuffer) (help #th_createbuffer) (infos) ) ) (makeassign "AsimCDFS_Buffer" #bufferDir) (user #theirlevel) (set n 0) (while (set #buffsubdir (select n "AsimCDFS_Buffer:PhotoCDIcon_Buffer" "AsimCDFS_Buffer:Audio" "AsimCDFS_Buffer:Raw" "AsimCDFS_Buffer:Marks" "AsimCDFS_Buffer:NonVolatile" "" ) ) ( (if (not (exists #buffsubdir (noreq))) (makedir #buffsubdir (prompt #tp_createsub1 #buffsubdir ) (help #th_createsub ) (infos) ) ) (set n (+ n 1)) ) ) (copyfiles (prompt #tp_copycorel ) (source "AsimCDFSInst:Corel_Directory") (dest "AsimCDFS_Buffer:") (confirm) (help #th_copycorel) ) (if (not (exists "C:ViewTek" (noreq))) ((copyfiles (prompt #tp_copyviewtek) (source "AsimCDFSInst:C/VT") (dest "C:") (newname "ViewTek") (help #th_copyviewtek) (confirm) )) ) ;***** ; delete obsolete files ; Delete old AsimPhoto, if present in AsimCDFS dir. ; all other files are either the user's or will be over written (if (exists "AsimCDFS:AsimPhoto") ((delete "AsimCDFS:AsimPhoto" (prompt #tp_deletephoto ) (confirm) (help #th_deletephoto ) ) ) ) (if (exists "AsimCDFS:AsimPhoto.info") ((delete "AsimCDFS:AsimPhoto.info" (prompt #tp_deletephoto ) (confirm) (help #th_deletephoto ) ) ) ) (if (exists "ENVARC:AsimCDFS/Photo.info") ((delete "ENVARC:AsimCDFS/Photo.info" (prompt #tp_deletephoto ) (confirm) (help #th_deletephoto ) ) ) ) (if (exists "ENVARC:AsimCDFS/DiscChanger.prefs") ((delete "ENVARC:AsimCDFS/DiscChanger.prefs" (prompt #tp_deleteprefs ) (confirm) (help #th_deleteprefs ) ) ) ) (if (exists "ENVARC:AsimCDFS/AsimTunes.prefs") ((delete "ENVARC:AsimCDFS/AsimTunes.prefs" (prompt #tp_deleteprefs ) (confirm) (help #th_deleteprefs ) ) ) ) (if (exists "ENVARC:AsimCDFS/AsimPhoto.prefs") ((delete "ENVARC:AsimCDFS/AsimPhoto.prefs" (prompt #tp_deleteprefs ) (confirm) (help #th_deleteprefs ) ) ) ) ;***** ; l:AsimCDFS (complete 21) (protect "l:AsimCDFS" "rwed" ) (run "AsimCDFSInst:c/lx e AsimCDFSInst:l/AsimCDFS.lha l:" (prompt #tp_copyasimcdfs ) (confirm) (help #th_copyasimcdfs ) ) ;***** ; devs:asimcdfs.device (complete 25) (protect "devs:asimcdfs.device" "rwed" ) (run "AsimCDFSInst:c/lx e AsimCDFSInst:devs/asimcdfs.lha devs:" (prompt #tp_copycdfsdevice ) (confirm) (help #th_copycdfsdevice ) ) ;***** ; Create PD0 mountlist for PD/CD-ROM drive ;(if (= #isPDCD 1) ; ( ; ) ;) (if (and (= #IsAmiga #typeATAPI) (< #wbversion 39) ) (abort #text_abort_atapiwb #wbversion ".") ) ;***** ; Create mountlists and alter user-startup ; ; no need to worry about NEC 4X4 as the atapi.device requires WB3.0 or above ; (at this time!) ;***** (if (= #wbversion 37) ((if #PioneerSeparate ((set #startupCommand1 (cat "mount >NIL: " #CDDevice_NC "0: from devs:MountList." #CDDevice_NC "\n") ) (set #startupCommand2 (cat "mount >NIL: " #CDDevice_NC "1: from devs:MountList." #CDDevice_NC "\n") ) (set #startupCommand3 (cat "mount >NIL: " #CDDevice_NC "2: from devs:MountList." #CDDevice_NC "\n") ) (set #startupCommand4 (cat "mount >NIL: " #CDDevice_NC "3: from devs:MountList." #CDDevice_NC "\n") ) (set #startupCommand5 (cat "mount >NIL: " #CDDevice_NC "4: from devs:MountList." #CDDevice_NC "\n") ) (if #isPioneer (set #startupCommand6 (cat #startupCommand5 "mount >NIL: " #CDDevice_NC "5: from devs:MountList." #CDDevice_NC "\n") ) ) (if #isNakamichi (set #startupCommand6 (cat #startupCommand5 "mount >NIL: " #CDDevice_NC "5: from devs:MountList." #CDDevice_NC "\n" "mount >NIL: " #CDDevice_NC "6: from devs:MountList." #CDDevice_NC "\n") ) ) (if #autoMount ((protect "S:User-Startup" "rwed" ) (protect "S:Startup-Sequence" "rwed" ) (startup "AsimCDFS" (command #echotxt) (command (cat "assign AsimCDFS: \"" #tunesDir "\"\n")) (command (cat "assign AsimCDFS_Buffer: \"" #bufferDir "\"\n")) (command #startupCommand1 ) (command #startupCommand2 ) (command #startupCommand3 ) (command #startupCommand4 ) (command #startupCommand6 ) (prompt #tp_insertmount) (help #th_insertmount1 #CDDevice_NC #th_insertmount2) )) )) ) (if (not #PioneerSeparate) ((set #startupCommand (cat "mount >NIL: " #CDDevice " from devs:MountList." #CDDevice_NC "\n") ) (if #autoMount ((protect "S:User-Startup" "rwed" ) (protect "S:Startup-Sequence" "rwed" ) (startup "AsimCDFS" (command #echotxt) (command (cat "assign AsimCDFS: \"" #tunesDir "\"\n")) (command (cat "assign AsimCDFS_Buffer: \"" #bufferDir "\"\n")) (command #startupCommand ) (prompt #tp_insertmount) (help #th_insertmount1 #CDDevice #th_insertmount2) )) )) ) (if (not #autoMount) ((protect "S:User-Startup" "rwed" ) (protect "S:Startup-Sequence" "rwed" ) (startup "AsimCDFS" (command (cat "assign AsimCDFS: \"" #tunesDir "\"\n")) (command (cat "assign AsimCDFS_Buffer: \"" #bufferDir "\"\n")) (prompt #tp_insertmount) (help #th_insertmount1 #CDDevice #th_insertmount2) )) ) (protect (cat "devs:MountList." #CDDevice_NC) "rwed" ) (set #Mount_Five (cat #CDDevice_NC "4:\n" " Device = " #SCSIDevice "\n" " Unit = "(+ 40 #SCSIUnit) "\n" " Mount = 1\n" #text_mountfiller "#\n\n" #CDDevice_NC "5:\n" " Device = " #SCSIDevice "\n" " Unit = "(+ 50 #SCSIUnit) "\n" " Mount = 1\n" #text_mountfiller "#\n\n" ) ) (if #isPioneer (set #LastLine (cat #Mount5 "\n")) ) (if #isNakamichi (set #LastLine (cat #Mount5 #CDDevice_NC "6:\n" " Device = " #SCSIDevice "\n" " Unit = "(+ 60 #SCSIUnit) "\n" " Mount = 1\n" #text_mountfiller "#\n\n" ) ) ) (if #isNakamichi4Disc (set #LastLine "\n") ) (if #PioneerSeparate (textfile (dest (cat "devs:MountList." #CDDevice_NC) ) (append #text_mountheader) (append #CDDevice_NC "0:\n") (append " Device = " #SCSIDevice "\n" ) (append " Unit = "(+ 00 #SCSIUnit) "\n" ) (append " Mount = 1\n") (append #text_mountfiller) (append "#\n\n") (append #CDDevice_NC "1:\n") (append " Device = " #SCSIDevice "\n" ) (append " Unit = "(+ 10 #SCSIUnit) "\n" ) (append " Mount = 1\n") (append #text_mountfiller) (append "#\n\n") (append #CDDevice_NC "2:\n") (append " Device = " #SCSIDevice "\n" ) (append " Unit = "(+ 20 #SCSIUnit) "\n" ) (append " Mount = 1\n") (append #text_mountfiller) (append "#\n\n") (append #CDDevice_NC "3:\n") (append " Device = " #SCSIDevice "\n" ) (append " Unit = "(+ 30 #SCSIUnit) "\n" ) (append " Mount = 1\n") (append #text_mountfiller) (append "#\n\n") (append #LastLine ) ) ) (if (not #PioneerSeparate) (textfile (dest (cat "devs:MountList." #CDDevice_NC) ) (append #text_mountheader) (append #CDDevice "\n") (append " Device = " #SCSIDevice "\n" ) (append " Unit = " #SCSIUnit "\n" ) (append " Mount = " #autoMount "\n") (append #text_mountfiller) (append "#\n") ) )) ) (if (> #wbversion 37) ((if (not #PioneerSeparate) ((textfile (dest (cat #mountDirectory #CDDevice_NC) ) (append #text_mountheader) (append " Device = " #SCSIDevice "\n" ) (append " Unit = " #SCSIUnit "\n" ) (append " Mount = 1\n") (append #text_mountfiller) ) (copyfiles (prompt #tp_copymounticon) (source "AsimCDFSInst:Storage/DOSDrivers/CD0.info") (dest #mountDirectory) (newname (cat #CDDevice_NC ".info")) (help #th_copymounticon) (confirm) ) )) (if #PioneerSeparate ((textfile (dest (cat #mountDirectory #CDDevice_NC "0") ) (append #text_mountheader) (append " Device = " #SCSIDevice "\n" ) (append " Unit = "(+ 00 #SCSIUnit) "\n" ) (append " Mount = 1\n") (append #text_mountfiller) ) (copyfiles (source "AsimCDFSInst:Storage/DOSDrivers/CD0.info") (dest #mountDirectory) (newname (cat #CDDevice_NC "0.info")) (prompt #tp_copymounticon) (help #th_copymounticon) (confirm) ) (textfile (dest (cat #mountDirectory #CDDevice_NC "1") ) (append #text_mountheader) (append " Device = " #SCSIDevice "\n" ) (append " Unit = "(+ 10 #SCSIUnit) "\n" ) (append " Mount = 1\n") (append #text_mountfiller) ) (copyfiles (source "AsimCDFSInst:Storage/DOSDrivers/CD0.info") (dest #mountDirectory) (newname (cat #CDDevice_NC "1.info")) (prompt #tp_copymounticon) (help #th_copymounticon) (confirm) ) (textfile (dest (cat #mountDirectory #CDDevice_NC "2") ) (append #text_mountheader) (append " Device = " #SCSIDevice "\n" ) (append " Unit = "(+ 20 #SCSIUnit) "\n" ) (append " Mount = 1\n") (append #text_mountfiller) ) (copyfiles (source "AsimCDFSInst:Storage/DOSDrivers/CD0.info") (dest #mountDirectory) (newname (cat #CDDevice_NC "2.info")) (prompt #tp_copymounticon) (help #th_copymounticon) (confirm) ) (textfile (dest (cat #mountDirectory #CDDevice_NC "3") ) (append #text_mountheader) (append " Device = " #SCSIDevice "\n" ) (append " Unit = "(+ 30 #SCSIUnit) "\n" ) (append " Mount = 1\n") (append #text_mountfiller) ) (copyfiles (source "AsimCDFSInst:Storage/DOSDrivers/CD0.info") (dest #mountDirectory) (newname (cat #CDDevice_NC "3.info")) (prompt #tp_copymounticon) (help #th_copymounticon) (confirm) ) (if (or #isPioneer #isNakamichi) ((textfile (dest (cat #mountDirectory #CDDevice_NC "4") ) (append #text_mountheader) (append " Device = " #SCSIDevice "\n" ) (append " Unit = "(+ 40 #SCSIUnit) "\n" ) (append " Mount = 1\n") (append #text_mountfiller) ) (copyfiles (source "AsimCDFSInst:Storage/DOSDrivers/CD0.info") (dest #mountDirectory) (newname (cat #CDDevice_NC "4.info")) (prompt #tp_copymounticon) (help #th_copymounticon) (confirm) ) (textfile (dest (cat #mountDirectory #CDDevice_NC "5") ) (append #text_mountheader) (append " Device = " #SCSIDevice "\n" ) (append " Unit = "(+ 50 #SCSIUnit) "\n" ) (append " Mount = 1\n") (append #text_mountfiller) ) (copyfiles (source "AsimCDFSInst:Storage/DOSDrivers/CD0.info") (dest #mountDirectory) (newname (cat #CDDevice_NC "5.info")) (prompt #tp_copymounticon) (help #th_copymounticon) (confirm) ) (if #isNakamichi ((textfile (dest (cat #mountDirectory #CDDevice_NC "6") ) (append #text_mountheader) (append " Device = " #SCSIDevice "\n" ) (append " Unit = "(+ 60 #SCSIUnit) "\n" ) (append " Mount = 1\n") (append #text_mountfiller) ) (copyfiles (source "AsimCDFSInst:Storage/DOSDrivers/CD0.info") (dest #mountDirectory) (newname (cat #CDDevice_NC "6.info")) (prompt #tp_copymounticon) (help #th_copymounticon) (confirm) )) )) ) )) (protect "S:User-Startup" "rwed" ) (protect "S:Startup-Sequence" "rwed" ) (if (not #autoMount) (startup "AsimCDFS" (command (cat "assign AsimCDFS: \"" #tunesDir "\"\n")) (command (cat "assign AsimCDFS_Buffer: \"" #bufferDir "\"\n")) (prompt #tp_insertassign) (help #th_insertassign) ) ) (if #autoMount ((if #isPioneer (set #mountCommand6 (cat "\nmount >NIL: " #CDDevice_NC "4:\n" "mount >NIL: " #CDDevice_NC "5:\n") ) ) (if #isNakamichi (set #mountCommand6 (cat "\nmount >NIL: " #CDDevice_NC "4:\n" "mount >NIL: " #CDDevice_NC "5:\n" "mount >NIL: " #CDDevice_NC "6:\n") ) ) (if (or #is4X4 #isNakamichi4Disc) (set #mountCommand6 "\n") ) (if #PioneerSeparate (startup "AsimCDFS" (command #echotxt) (command (cat "assign AsimCDFS: \"" #tunesDir "\"\n")) (command (cat "assign AsimCDFS_Buffer: \"" #bufferDir "\"\n")) (command (cat "mount >NIL: " #CDDevice_NC "0:\n") ) (command (cat "mount >NIL: " #CDDevice_NC "1:\n") ) (command (cat "mount >NIL: " #CDDevice_NC "2:\n") ) (command (cat "mount >NIL: " #CDDevice_NC "3:") ) (command #mountCommand6 ) (prompt #tp_insertassign) (help #th_insertassign) ) ) (if (not #PioneerSeparate) (startup "AsimCDFS" (command #echotxt) (command (cat "assign AsimCDFS: \"" #tunesDir "\"\n")) (command (cat "assign AsimCDFS_Buffer: \"" #bufferDir "\"\n")) (command (cat "mount >NIL: " #CDDevice "\n") ) (prompt #tp_insertassign) (help #th_insertassign) ) ) ) ) )) ;***** ; Delete old mountlists is DEVS:DosDrivers/ (if (> #wbversion 37) ((if (not #PioneerSeparate) ((if (exists (cat "DEVS:DosDrivers/" #CDDevice_NC)) ((delete (cat "DEVS:DosDrivers/" #CDDevice_NC) (confirm) (prompt #tp_deletemountlist ) (help #tp_deletemountlist ) ) (delete (cat "DEVS:DosDrivers/" #CDDevice_NC ".info") (confirm) (prompt #tp_deletemountlist ) (help #tp_deletemountlist ) ) ) )) )) (if #PioneerSeparate ((set n 0) (while (set #oldml (select n (cat "DEVS:DosDrivers/" #CDDevice_NC "0") (cat "DEVS:DosDrivers/" #CDDevice_NC "1") (cat "DEVS:DosDrivers/" #CDDevice_NC "2") (cat "DEVS:DosDrivers/" #CDDevice_NC "3") (cat "DEVS:DosDrivers/" #CDDevice_NC "4") (cat "DEVS:DosDrivers/" #CDDevice_NC "5") (cat "DEVS:DosDrivers/" #CDDevice_NC "6") "" ) ) ((if (exists #oldml) ((delete #oldml (confirm) (prompt #tp_deletemountlist ) (help #tp_deletemountlist ) ) (delete (cat #oldml ".info") (confirm) (prompt #tp_deletemountlist ) (help #tp_deletemountlist ) ) ) ) (set n (+ n 1))) ) ) )) ;***** ; Default prefs files (if (or (= #IsAmiga #typeAMIGA) (= #IsAmiga #typeFLYER)) ((if (or #isPioneer (or #isNakamichi4Disc #isNakamichi)) ;***** ; Default prefs file for a Pioneer drive, separate ((if #PioneerSeparate ((copyfiles (source "AsimCDFSInst:Default_Prefs/Pioneer_Separate") (dest "ENVArc:AsimCDFS") (newname (cat #CDDevice_NC "0")) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) (copyfiles (source "AsimCDFSInst:Default_Prefs/Pioneer_Separate") (dest "ENVArc:AsimCDFS") (newname (cat #CDDevice_NC "1")) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) (copyfiles (source "AsimCDFSInst:Default_Prefs/Pioneer_Separate") (dest "ENVArc:AsimCDFS") (newname (cat #CDDevice_NC "2")) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) (copyfiles (source "AsimCDFSInst:Default_Prefs/Pioneer_Separate") (dest "ENVArc:AsimCDFS") (newname (cat #CDDevice_NC "3")) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) (if (or #isNakamichi #isPioneer) ((copyfiles (source "AsimCDFSInst:Default_Prefs/Pioneer_Separate") (dest "ENVArc:AsimCDFS") (newname (cat #CDDevice_NC "4")) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) (copyfiles (source "AsimCDFSInst:Default_Prefs/Pioneer_Separate") (dest "ENVArc:AsimCDFS") (newname (cat #CDDevice_NC "5")) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) (if #isNakamichi (copyfiles (source "AsimCDFSInst:Default_Prefs/Pioneer_Separate") (dest "ENVArc:AsimCDFS") (newname (cat #CDDevice_NC "6")) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) )))) ) ) ;***** ; Default prefs file for a Pioneer drive, pooled (if (not #PioneerSeparate) ( (if #isPioneer (copyfiles (source "AsimCDFSInst:Default_Prefs/Pioneer_Pool") (dest "ENVArc:AsimCDFS") (newname #CDDevice_NC) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) )) (if #IsNakamichi (copyfiles (source "AsimCDFSInst:Default_Prefs/Nakamichi_Pool") (dest "ENVArc:AsimCDFS") (newname #CDDevice_NC) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) )) (if #IsNakamichi4Disc (copyfiles (source "AsimCDFSInst:Default_Prefs/Nakamichi4_Pool") (dest "ENVArc:AsimCDFS") (newname #CDDevice_NC) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) )) ) ) )) ;***** ; Default prefs file for a SCSI CD-ROM drive (if (and (not #isNakamichi) (not #isPioneer)) (copyfiles (source "AsimCDFSInst:Default_Prefs/Default") (dest "ENVArc:AsimCDFS") (newname #CDDevice_NC) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) )) ) ;***** ; Default prefs file for an ATAPI CD-ROM drive (if (= #IsAmiga #typeATAPI) ( (if (not #is4X4) (copyfiles (source "AsimCDFSInst:Default_Prefs/ATAPI") (dest "ENVArc:AsimCDFS") (newname #CDDevice_NC) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) ) (if #is4X4 ((if #PioneerSeparate ((copyfiles (source "AsimCDFSInst:Default_Prefs/4X4_Separate") (dest "ENVArc:AsimCDFS") (newname (cat #CDDevice_NC "0")) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) (copyfiles (source "AsimCDFSInst:Default_Prefs/4X4_Separate") (dest "ENVArc:AsimCDFS") (newname (cat #CDDevice_NC "1")) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) (copyfiles (source "AsimCDFSInst:Default_Prefs/4X4_Separate") (dest "ENVArc:AsimCDFS") (newname (cat #CDDevice_NC "2")) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) (copyfiles (source "AsimCDFSInst:Default_Prefs/4X4_Separate") (dest "ENVArc:AsimCDFS") (newname (cat #CDDevice_NC "3")) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) ) ) (if (not #PioneerSeparate) (copyfiles (source "AsimCDFSInst:Default_Prefs/4X4_Pooled") (dest "ENVArc:AsimCDFS") (newname #CDDevice_NC) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) )) ) ) ) ;***** ; Default prefs file for a CDTV (if (= #IsAmiga #typeCDTV) (copyfiles (source "AsimCDFSInst:Default_Prefs/CDTV") (dest "ENVArc:AsimCDFS") (newname #CDDevice_NC) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) ) ;***** ; Default prefs file for a CD³² (if (= #IsAmiga #typeCD32) (copyfiles (source "AsimCDFSInst:Default_Prefs/CD³²") (dest "ENVArc:AsimCDFS") (newname #CDDevice_NC) (prompt #tp_copyprefs ) (help #th_copyprefs) (confirm) ) ) (complete 28) ;***** ; AsimTunes (set #instTunes (askbool (prompt #tp_copytunes) (help #th_copytunes ) (default 1) ) ) (if #instTunes ((protect "AsimCDFS:AsimTunes" "rwed" ) (protect "AsimCDFS:AsimTunes.info" "rwed" ) (copyfiles (prompt #tp_copyingtunes ) (source "AsimCDFSInst:AsimTunes") (dest "AsimCDFS:") (infos) (noposition) (help #th_copytunes) (confirm) ) (tooltype (dest "AsimCDFS:AsimTunes" ) (settooltype "CDROM" #CDDevice ) (noposition) ) (complete 31) (protect "fonts:AsimTunes2" "rwed" ) (protect "fonts:AsimTunes2.font" "rwed" ) (protect "fonts:AsimTunes2/11" "rwed" ) (protect "fonts:AsimTunes2/20" "rwed" ) (copyfiles (prompt #tp_copytunesfont ) (source "AsimCDFSInst:fonts") (dest "fonts:" ) (all) (help #th_copytunesfont ) (confirm) ) )) ;***** ; DiscChanger (complete 34) (set #instChanger (askbool (prompt #tp_copydc) (help #th_copydc ) (default 1) ) ) (complete 37) (if #instChanger ((protect "AsimCDFS:DiscChanger" "rwed" ) (copyfiles (prompt #tp_copyingdc ) (source "AsimCDFSInst:DiscChanger") (dest "AsimCDFS:") (infos) (noposition) (help #th_copydc) (confirm) ) (tooltype (dest "AsimCDFS:DiscChanger" ) (settooltype "CDROM" #CDDevice ) (noposition) ) )) ;***** ; PDFormat (complete 38) (if (= #isPDCD 1) ( (set #instPDFormat (askbool (prompt #tp_copypd) (help #th_copypd ) (default 1) ) ) (complete 39) (if #instPDFormat ((protect "AsimCDFS:PD_Format" "rwed" ) (copyfiles (prompt #tp_copyingdc ) (source "AsimCDFSInst:PD_Format") (dest "AsimCDFS:") (infos) (noposition) (help #th_copydc ) (confirm) ) (tooltype (dest "AsimCDFS:PD_Format" ) (noposition) ) )) )) ;***** ; AsimCDFS_Prefs (complete 40) (set #instPrefs (askbool (prompt #tp_copyasimprefs) (help ) (default 1) ) ) (complete 43) (if #instPrefs ((protect "AsimCDFS:AsimCDFS_Prefs" "rwed" ) (copyfiles (prompt ) (source "AsimCDFSInst:AsimCDFS_Prefs") (dest "AsimCDFS:") (infos) (noposition) (help #th_copyasimprefs ) (confirm) ) )) ;***** ; SimBoot (complete 46) (set #instSimBoot (askbool (prompt #tp_copysimboot) (help #th_copysimboot ) (default 1) ) ) (complete 50) (if #instSimBoot ((protect "AsimCDFS:SimBoot" "rwed" ) (copyfiles (prompt #th_copyingsimboot ) (source "AsimCDFSInst:SimBoot") (dest "AsimCDFS:") (infos) (noposition) (help #th_copysimboot ) (confirm) ) )) ;***** ; CD³²_Prefs (complete 53) (set #instCD32Prefs (askbool (prompt #tp_copycd32prefs) (help #th_copycd32prefs ) (default 1) ) ) (complete 56) (if #instCD32Prefs ((protect "AsimCDFS:CD³²_Prefs" "rwed" ) (copyfiles (prompt #tp_copyingcd32prefs ) (source "AsimCDFSInst:CD³²_Prefs") (dest "AsimCDFS:") (infos) (noposition) (help #th_copycd32prefs ) (confirm) ) )) ;***** ; CDTV Prefs (complete 59) (set #instCDTVPrefs (askbool (prompt #tp_copycdtvprefs) (help #th_copycdtvprefs ) (default 1) ) ) (complete 62) (if #instCDTVPrefs ((protect "AsimCDFS:CDTV_Prefs" "rwed" ) (copyfiles (prompt #tp_copyingcdtvprefs ) (source "AsimCDFSInst:CDTV_Prefs") (dest "AsimCDFS:") (infos) (noposition) (help #th_copycdtvprefs ) (confirm) ) )) (complete 65) (set #instCDTVEmul (askbool (prompt #tp_copycdtvemul) (help #th_copycdtvemul ) (default 1) ) ) (complete 68) (if #instCDTVEmul ((complete 71) ;******************** ; devs:cdtv.device, devs:bookmark.device, devs:cardmark.device (protect "devs:cdtv.device" "rwed" ) (protect "devs:bookmark.device" "rwed" ) (protect "devs:cardmark.device" "rwed" ) (run "AsimCDFSInst:c/lx e AsimCDFSInst:devs/cdtv.lha devs:" (prompt #tp_copycdtvdevice ) (confirm) (help #th_copycdtvemul ) ) ;***** ; libs:playerprefs.library (complete 81) (protect "devs:playerprefs.library" "rwed" ) (copyfiles (prompt #tp_copyplayerprefs ) (source "AsimCDFSInst:libs/playerprefs.library") (dest "libs:") (confirm) (help #th_copycdtvemul ) ) )) (set #instCD32Emul (askbool (prompt #tp_copycd32emul) (help #th_copycd32emul ) (default 1) ) ) (complete 84) (if #instCD32Emul ((complete 87) ;***** ; devs:cd.device (protect "devs:cd.device" "rwed" ) (copyfiles (prompt #tp_copycddevice ) (source "AsimCDFSInst:devs/cd.device") (dest "devs:") (confirm) (help #th_copycd32emul ) ) ;***** ; libs:nonvolatile.library (complete 90) (protect "devs:nonvolatile.library" "rwed" ) (copyfiles (prompt #tp_copynv ) (source "AsimCDFSInst:libs/nonvolatile.library") (dest "libs:") (confirm) (help #th_copycd32emul ) ) ;***** ; libs:lowlevel.library (complete 93) (protect "devs:lowlevel.library" "rwed" ) (copyfiles (prompt #tp_copylowlevel ) (source "AsimCDFSInst:libs/lowlevel.library") (dest "libs:") (confirm) (help #th_copycd32emul ) ) )) ;***** ; default icons in ENV (makedir "ENVARC:AsimCDFS" (prompt #tp_makeenvarc) (help #th_makeenvarc) ) (makedir "ENV:AsimCDFS" (prompt #tp_makeenv) (help #th_makeenv) ) (copyfiles (source "AsimCDFSInst:ENVArc/AsimCDFS") (dest "ENVArc:AsimCDFS") (infos) (all) (prompt #tp_copyicons ) (help #th_copyicons) (confirm) ) (copyfiles (source "AsimCDFSInst:ENVArc/AsimCDFS") (dest "ENV:AsimCDFS") (infos) (all) (prompt #tp_copyicons ) (help #th_copyicons) (confirm) ) ;***** ; ask which languages to be added (if (exists "LOCALE:" (noreq)) ((user 2) (set #language (askoptions (prompt #tp_catalogs) (help #th_catalogs ) (choices "Deutsch" "Français" "Italiano") (default (shiftleft 1 (- #our_language 1)) ) ) ) (user #theirlevel) (set n 0) (while (set #langdir (select n "deutsch" "français" "italiano" "" ) ) ( (if (IN #language n) ((set #langdest (tackon "LOCALE:catalogs/" #langdir)) (set #langsrc (tackon "AsimCDFSInst:catalogs/" #langdir)) (run (cat "AsimCDFSInst:c/lx e " (tackon #langsrc "Catalogs.lha") " " #langdest) (prompt #tp_copylocale1 #langdir #tp_copylocale2 ) (help #th_copylocale) (confirm)) (copyfiles (prompt #tp_copylocale1 #langdir #tp_copylocale2 ) (source (tackon #langsrc "SCSIInquire.catalog") ) (dest #langdest) (help #th_copylocale) (confirm)) ) ) (set n (+ n 1)) ) ) )) ;***** ; Create a 'SYS/NV_Location' environment variable (run "setenv SYS/NV_Location AsimCDFS_Buffer:NonVolatile/") ;***** ; Create a CD³² Preferences file (run "AsimCDFS:CD³²_Prefs SAVE DEFAULT") ;***** ; Create a CDTV Preferences file (run "AsimCDFS:CDTV_Prefs SAVE DEFAULT") ;***** ; Tell NewTek Flyer users where the CD-ROM drive is located (if (= #IsAmiga #typeFLYER) ( (user 2) (message #text_message_flyer ) (user #theirlevel) ) ) ;***** ; Tell About Extended icons (user 2) (message #text_message_extendedicons) (user #theirlevel) ;***** ; remove assign to AsimCDFSInst (makeassign "AsimCDFSInst") (makeassign "AsimCDFS") (makeassign "AsimCDFS_Buffer") (complete 100)