/*
 *  kernel/chr_drv/vt.c
 *
 *  Copyright (C) 1992 obz under the linux copyright
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file README.legal in the main directory of this archive
 * for more details.
 */

#include <linux/types.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/timer.h>
#include <linux/kernel.h>
#include <linux/keyboard.h>
#include <linux/kd.h>
#include <linux/vt.h>

#include <asm/segment.h>

#include "vt_kern.h"

/*
 * Console (vt and kd) routines, as defined by USL SVR4 manual, and by
 * experimentation and study of X386 SYSV handling.
 *
 * One point of difference: SYSV vt's are /dev/vtX, which X >= 0, and
 * /dev/console is a separate ttyp. Under Linux, /dev/tty0 is /dev/console,
 * and the vc start at /dev/ttyX, X >= 1. We maintain that here, so we will
 * always treat our set of vt as numbered 1..NR_CONSOLES (corresponding to
 * ttys 0..NR_CONSOLES-1). Explicitly naming VT 0 is illegal, but using
 * /dev/tty0 (fg_console) as a target is legal, since an implicit aliasing
 * to the current console is done by the main ioctl code.
 */

struct vt_cons vt_cons[NR_CONSOLES];

extern int sys_ioperm(unsigned long from, unsigned long num, int on);
extern void change_console(unsigned int new_console);
extern void complete_change_console(unsigned int new_console);
extern int vt_waitactive(void);

/*
 * these are the valid i/o ports we're allowed to change. they map all the
 * video ports
 */
#define GPFIRST 0x3b4
#define GPLAST 0x3df
#define GPNUM (GPLAST - GPFIRST + 1)

/*
 * Generates sound of some count for some number of clock ticks
 * [count = 1193180 / frequency]
 *
 * If freq is 0, will turn off sound, else will turn it on for that time.
 * If msec is 0, will return immediately, else will sleep for msec time, then
 * turn sound off.
 *
 * We use the BEEP_TIMER vector since we're using the same method to
 * generate sound, and we'll overwrite any beep in progress. That may
 * be something to fix later, if we like.
 *
 * We also return immediately, which is what was implied within the X
 * comments - KDMKTONE doesn't put the process to sleep.
 */
void
kd_nosound(void)
{
#if 0
	/* disable counter 2 */
	outb(inb_p(0x61)&0xFC, 0x61);
#endif
	return;
}

void
kd_mksound(unsigned int count, unsigned int ticks)
{
#if 0
	if (count)
	{
		/* enable counter 2 */
		outb_p(inb_p(0x61)|3, 0x61);
		/* set command for counter 2, 2 byte write */
		outb_p(0xB6, 0x43);
		/* select desired HZ */
		outb_p(count & 0xff, 0x42);
		outb((count >> 8) & 0xff, 0x42);

		if (ticks)
		{
			timer_table[BEEP_TIMER].expires = jiffies + ticks;
			timer_table[BEEP_TIMER].fn = kd_nosound;
			timer_active |= (1 << BEEP_TIMER);
		}
	}

	else
		kd_nosound();

#endif
	return;
}

/*
 * We handle the console-specific ioctl's here.  We allow the
 * capability to modify any console, not just the fg_console.
 */
int vt_ioctl(struct tty_struct *tty, struct file * file,
	     unsigned int cmd, unsigned int arg)
{
	int console, i;
	unsigned char ucval;
	struct kbd_struct * kbd = NULL;

	console = tty->line - 1;

	if (console < 0 || console >= NR_CONSOLES)
		return -EINVAL;

#if 0
	kbd = kbd_table + console;
#endif
	switch (cmd) {
	case KIOCSOUND:
		kd_mksound((unsigned int)arg, 0);
		return 0;

	case KDMKTONE:
	{
		unsigned int ticks = HZ * ((arg >> 16) & 0xffff) / 1000;

		/*
		 * Generate the tone for the appropriate number of ticks.
		 * If the time is zero, turn off sound ourselves.
		 */
		kd_mksound(arg & 0xffff, ticks);
		if (ticks == 0)
			kd_nosound();
		return 0;
	}

	case KDGKBTYPE:
		/*
		 * this is naive.
		 */
		i = verify_area(VERIFY_WRITE, (void *) arg, sizeof(unsigned char));
		if (!i)
			put_fs_byte(KB_101, (unsigned char *) arg);
		return i;

#if 0
	case KDADDIO:
	case KDDELIO:
		/*
		 * KDADDIO and KDDELIO may be able to add ports beyond what
		 * we reject here, but to be safe...
		 */
		if (arg < GPFIRST || arg > GPLAST)
			return -EINVAL;
		return sys_ioperm(arg, 1, (cmd == KDADDIO)) ? -ENXIO : 0;

	case KDENABIO:
	case KDDISABIO:
		return sys_ioperm(GPFIRST, GPNUM,
				  (cmd == KDENABIO)) ? -ENXIO : 0;
#endif

	case KDSETMODE:
		/*
		 * currently, setting the mode from KD_TEXT to KD_GRAPHICS
		 * doesn't do a whole lot. i'm not sure if it should do any
		 * restoration of modes or what...
		 */
		switch (arg) {
		case KD_GRAPHICS:
			break;
		case KD_TEXT0:
		case KD_TEXT1:
			arg = KD_TEXT;
		case KD_TEXT:
			break;
		default:
			return -EINVAL;
		}
		if (vt_cons[console].vc_mode == (unsigned char) arg)
			return 0;
		vt_cons[console].vc_mode = (unsigned char) arg;
		if (console != fg_console)
			return 0;
		/*
		 * explicitly blank/unblank the screen if switching modes
		 */
#if 0
		if (arg == KD_TEXT)
			unblank_screen();
		else {
			timer_active &= ~(1<<BLANK_TIMER);
			blank_screen();
		}
#endif
		return 0;

	case KDGETMODE:
		i = verify_area(VERIFY_WRITE, (void *) arg, sizeof(unsigned long));
		if (!i)
			put_fs_long(vt_cons[console].vc_mode, (unsigned long *) arg);
		return i;

	case KDMAPDISP:
	case KDUNMAPDISP:
		/*
		 * these work like a combination of mmap and KDENABIO.
		 * this could be easily finished.
		 */
		return -EINVAL;

	case KDSKBMODE:
		if (arg == K_RAW) {
			set_vc_kbd_flag(kbd, VC_RAW);
		} else if (arg == K_XLATE) {
			clr_vc_kbd_flag(kbd, VC_RAW);
		}
		else
			return -EINVAL;
		flush_input(tty);
		return 0;

	case KDGKBMODE:
		i = verify_area(VERIFY_WRITE, (void *) arg, sizeof(unsigned long));
		if (!i) {
			ucval = vc_kbd_flag(kbd, VC_RAW);
			put_fs_long(ucval ? K_RAW : K_XLATE, (unsigned long *) arg);
		}
		return i;

	case KDGETLED:
		i = verify_area(VERIFY_WRITE, (void *) arg, sizeof(unsigned char));
		if (i)
			return i;
		ucval = 0;
		if (vc_kbd_flag(kbd, VC_SCROLLOCK))
			ucval |= LED_SCR;
		if (vc_kbd_flag(kbd, VC_NUMLOCK))
			ucval |= LED_NUM;
		if (vc_kbd_flag(kbd, VC_CAPSLOCK))
			ucval |= LED_CAP;
		put_fs_byte(ucval, (unsigned char *) arg);
		return 0;

	case KDSETLED:
		if (arg & ~7)
			return -EINVAL;
		if (arg & LED_SCR)
			set_vc_kbd_flag(kbd, VC_SCROLLOCK);
		else
			clr_vc_kbd_flag(kbd, VC_SCROLLOCK);
		if (arg & LED_NUM)
			set_vc_kbd_flag(kbd, VC_NUMLOCK);
		else
			clr_vc_kbd_flag(kbd, VC_NUMLOCK);
		if (arg & LED_CAP)
			set_vc_kbd_flag(kbd, VC_CAPSLOCK);
		else
			clr_vc_kbd_flag(kbd, VC_CAPSLOCK);
#if 0
		set_leds();
#endif
		return 0;

	case VT_SETMODE:
	{
		struct vt_mode *vtmode = (struct vt_mode *)arg;
		char mode;

		i = verify_area(VERIFY_WRITE, (void *)vtmode, sizeof(struct vt_mode));
		if (i)
			return i;
		mode = get_fs_byte(&vtmode->mode);
		if (mode != VT_AUTO && mode != VT_PROCESS)
			return -EINVAL;
		vt_cons[console].vt_mode.mode = mode;
		vt_cons[console].vt_mode.waitv = get_fs_byte(&vtmode->waitv);
		vt_cons[console].vt_mode.relsig = get_fs_word(&vtmode->relsig);
		vt_cons[console].vt_mode.acqsig = get_fs_word(&vtmode->acqsig);
		/* the frsig is ignored, so we set it to 0 */
		vt_cons[console].vt_mode.frsig = 0;
		vt_cons[console].vt_pid = current->pid;
		vt_cons[console].vt_newvt = 0;
		return 0;
	}

	case VT_GETMODE:
	{
		struct vt_mode *vtmode = (struct vt_mode *)arg;

		i = verify_area(VERIFY_WRITE, (void *)arg, sizeof(struct vt_mode));
		if (i)
			return i;
		put_fs_byte(vt_cons[console].vt_mode.mode, &vtmode->mode);
		put_fs_byte(vt_cons[console].vt_mode.waitv, &vtmode->waitv);
		put_fs_word(vt_cons[console].vt_mode.relsig, &vtmode->relsig);
		put_fs_word(vt_cons[console].vt_mode.acqsig, &vtmode->acqsig);
		put_fs_word(vt_cons[console].vt_mode.frsig, &vtmode->frsig);
		return 0;
	}

	/*
	 * Returns global vt state. Note that VT 0 is always open, since
	 * it's an alias for the current VT, and people can't use it here.
	 */
	case VT_GETSTATE:
	{
		struct vt_stat *vtstat = (struct vt_stat *)arg;
		unsigned short state, mask;

		i = verify_area(VERIFY_WRITE,(void *)vtstat, sizeof(struct vt_stat));
		if (i)
			return i;
		put_fs_word(fg_console + 1, &vtstat->v_active);
		state = 1;	/* /dev/tty0 is always open */
		for (i = 1, mask = 2; i <= NR_CONSOLES; ++i, mask <<= 1)
			if (tty_table[i] && tty_table[i]->count > 0)
				state |= mask;
		put_fs_word(state, &vtstat->v_state);
		return 0;
	}

	/*
	 * Returns the first available (non-opened) console.
	 */
	case VT_OPENQRY:
		i = verify_area(VERIFY_WRITE, (void *) arg, sizeof(long));
		if (i)
			return i;
		for (i = 1; i <= NR_CONSOLES; ++i)
			if (!tty_table[i] || tty_table[i]->count == 0)
				break;
		put_fs_long(i <= NR_CONSOLES ? i : -1, (unsigned long *)arg);
		return 0;

	/*
	 * ioctl(fd, VT_ACTIVATE, num) will cause us to switch to vt # num,
	 * with num >= 1 (switches to vt 0, our console) are not allowed, just
	 * to preserve sanity.
	 */
	case VT_ACTIVATE:
		if (arg == 0 || arg > NR_CONSOLES)
			return -ENXIO;
#if 0
		change_console(arg - 1);
#endif
		return 0;

        /*
	 * wait until the specified VT has been activated
	 */
	case VT_WAITACTIVE:
		if (arg == 0 || arg > NR_CONSOLES)
			return -ENXIO;
		while (fg_console != arg - 1)
		{
			if (vt_waitactive() < 0)
				return -EINTR;
		}
		return 0;

	/*
	 * If a vt is under process control, the kernel will not switch to it
	 * immediately, but postpone the operation until the process calls this
	 * ioctl, allowing the switch to complete.
	 *
	 * According to the X sources this is the behavior:
	 *	0:	pending switch-from not OK
	 *	1:	pending switch-from OK
	 *	2:	completed switch-to OK
	 */
	case VT_RELDISP:
		if (vt_cons[console].vt_mode.mode != VT_PROCESS)
		    return -EINVAL;

		/*
		 * Switching-from response
		 */
		if (vt_cons[console].vt_newvt >= 0)
  		{
			if (arg == 0)
				/*
				 * Switch disallowed, so forget we were trying
				 * to do it.
				 */
				vt_cons[console].vt_newvt = -1;
			else
			{
				/*
				 * The current vt has been released, so
				 * complete the switch.
				 */
				int newvt = vt_cons[console].vt_newvt;
				vt_cons[console].vt_newvt = -1;
				complete_change_console(newvt);
			}
		}

		else
 		/*
 		 * Switched-to response
 		 */
		{
			/*
			 * If it's just an ACK, ignore it
			 */
			if (arg != VT_ACKACQ)
			    return -EINVAL;
		}

		return 0;

	default:
		return -EINVAL;
	}
}