FORM)PTCHVERS$SAS Institute, Inc. Patch V6.50INPFw/printer.hOUTF */printer.hPMSGThis patch is Copyright 1994 by Brian Gontowski. It may be distributed with the V42 printer archive for non-profit purposes. Refer to the included documentation for more information.PSEQ'si#ifndef si #define si /* ** $VER: printer.h 42.7 (23.5.94) ** ** printer.device structure definitions ** ** Original printer.h ** (C) Copyright 1987-1992 Commodore-Amiga, Inc. ** All Rights Reserved */ #ifndef si #include si( #endif #ifndef EXEC_NODES_H #include si( #endif #ifndef EXEC_LISTS_H #include si( #endif #ifndef EXEC_PORTS_H #include siA #endif #ifndef DOS_DOS_H #include "dos/dos.h" #endif #define si si #define si si #define si s i #define PRD_QUERY spI #define PRD_NAME (CMD_NONSTD+4) #define PRD_ABORT (CMD_NONSTD+5) #define PRD_MOVE (CMD_NONSTD+6) #define PRD_LISTEN (CMD_NONSTD+7) #define PRD_DISABLE (CMD_NONSTD+8) #define PRD_PAUSE (CMD_NONSTD+9) #define PRD_MAXUNIT 25 /* Units 0 to 24 are available for printers */ #define UNIT_PRINTERMANAGER (-1) /* Unit -1 is reserved for the printer manager */ #define PRDF_NODEFAULT (1<<0) /* Ignore "DefaultPrinter" variable */ /* printer command definitions */ #define aRIS 0 /* ESCc reset ISO */ #define aRIN 1 /* ESC#1 initialize +++ */ #define aIND 2 /* ESCD lf ISO */ #define aNEL 3 /* ESCE return,lf ISO */ #define aRI 4 /* ESCM reverse lf ISO */ #define aSGR0 5 /* ESC[0m normal char set ISO */ #define aSGR3 6 /* ESC[3m italics on ISO */ #define aSGR23 7 /* ESC[23m italics off ISO */ #define aSGR4 8 /* ESC[4m underline on ISO */ #define aSGR24 9 /* ESC[24m underline off ISO */ #define aSGR1 10 /* ESC[1m boldface on ISO */ #define aSGR22 11 /* ESC[22m boldface off ISO */ #define aSFC 12 /* SGR30-39 set foreground color ISO */ #define aSBC 13 /* SGR40-49 set background color ISO */ #define si) /* ESC[0w normal pitch DEC */ #define si& /* ESC[2w elite on DEC */ #define si' /* ESC[1w elite off DEC */ #define si. /* ESC[4w condensed fine on DEC */ #define si* /* ESC[3w condensed off DEC */ #define si( /* ESC[6w enlarged on DEC */ #define SI /* ESC[5w enlarged off DEC */ #define aDEN6 21 /* ESC[6"z shadow print on DEC (sort of) */ #define aDEN5 22 /* ESC[5"z shadow print off DEC */ #define aDEN4 23 /* ESC[4"z doublestrike on DEC */ #define aDEN3 24 /* ESC[3"z doublestrike off DEC */ #define aDEN2 25 /* ESC[2"z NLQ on DEC */ #define aDEN1 26 /* ESC[1"z NLQ off DEC */ #define aSUS2 27 /* ESC[2v superscript on +++ */ #define aSUS1 28 /* ESC[1v superscript off +++ */ #define aSUS4 29 /* ESC[4v subscript on +++ */ #define aSUS3 30 /* ESC[3v subscript off +++ */ #define aSUS0 31 /* ESC[0v normalize the line +++ */ #define aPLU 32 /* ESCL partial line up ISO */ #define aPLD 33 /* ESCK partial line down ISO */ #define aFNT0 34 /* ESC(B US char set or Typeface 0 (default) */ #define aFNT1 35 /* ESC(R French char set or Typeface 1 */ #define aFNT2 36 /* ESC(K German char set or Typeface 2 */ #define aFNT3 37 /* ESC(A UK char set or Typeface 3 */ #define aFNT4 38 /* ESC(E Danish I char set or Typeface 4 */ #define aFNT5 39 /* ESC(H Sweden char set or Typeface 5 */ #define aFNT6 40 /* ESC(Y Italian char set or Typeface 6 */ #define aFNT7 41 /* ESC(Z Spanish char set or Typeface 7 */ #define aFNT8 42 /* ESC(J Japanese char set or Typeface 8 */ #define aFNT9 43 /* ESC(6 Norweign char set or Typeface 9 */ #define aFNT10 44 /* ESC(C Danish II char set or Typeface 10 */ /* Suggested typefaces are: 0 - default typeface. 1 - Line Printer or equiv. 2 - Pica or equiv. 3 - Elite or equiv. 4 - Helvetica or equiv. 5 - Times Roman or equiv. 6 - Gothic or equiv. 7 - Script or equiv. 8 - Prestige or equiv. 9 - Caslon or equiv. 10 - Orator or equiv. */ #define aPROP2 45 /* ESC[2p proportional on +++ */ #define aPROP1 46 /* ESC[1p proportional off +++ */ #define aPROP0 47 /* ESC[0p proportional clear +++ */ #define aTSS 48 /* ESC[n E set proportional offset ISO */ #define aJFY5 49 /* ESC[5 F auto left justify ISO */ #define aJFY7 50 /* ESC[7 F auto right justify ISO */ #define aJFY6 51 /* ESC[6 F auto full justify ISO */ #define aJFY0 52 /* ESC[0 F auto justify off ISO */ #define aJFY3 53 /* ESC[3 F letter space (justify) ISO (special) */ #define aJFY1 54 /* ESC[1 F word fill(auto center) ISO (special) */ #define aVERP0 55 /* ESC[0z 1/8" line spacing +++ */ #define aVERP1 56 /* ESC[1z 1/6" line spacing +++ */ #define aSLPP 57 /* ESC[nt set form length n DEC */ #define aPERF 58 /* ESC[nq perf skip n (n>0) +++ */ #define aPERF0 59 /* ESC[0q perf skip off +++ */ #define aLMS 60 /* ESC#9 left margin set +++ */ #define aRMS 61 /* ESC#0 right margin set +++ */ #define aTMS 62 /* ESC#8 top margin set +++ */ #define aBMS 63 /* ESC#2 bottom marg set +++ */ #define aSTBM 64 /* ESC[Pn1;Pn2r t&b margins DEC */ #define aSLRM 65 /* ESC[Pn1;Pn2s l&r margin DEC */ #define aCAM 66 /* ESC#3 clear margins +++ */ #define aHTS 67 /* ESCH set horiz tab ISO */ #define aVTS 68 /* ESCJ set vertical tabs ISO */ #define aTBC0 69 /* ESC[0g clear horiz tab ISO */ #define aTBC3 70 /* ESC[3g clear all horiz tab ISO */ #define aTBC1 71 /* ESC[1g clear vertical tabs ISO */ #define aTBC4 72 /* ESC[4g clear all vertical tabs ISO */ #define si/ /* ESC#4 clear all h&v tabs +++ */ #define si. /* ESC#5 set default tabs +++ */ #define s il /* ESC[Pn"x extended commands +++ */ #define aRAW 76 /* ESC[Pn"r next 'Pn' chars are raw +++ */ struct si { struct Message si struct Device siX /* device node pointer */ struct Unit *io_Unit; /* unit (driver private)*/ UWORD si /* device command */ UBYTE s i5 BYTE io_Error; /* error or warning num */ UWORD s=I /* printer command */ UBYTE io_Parm0; /* first command parameter */ UBYTE io_Parm1; /* second command parameter */ UBYTE io_Parm2; /* third command parameter */ UBYTE io_Parm3; /* fourth command parameter */ }; struct IODRPReq { struct Message si struct Device siX /* device node pointer */ struct Unit *io_Unit; /* unit (driver private)*/ UWORD si /* device command */ UBYTE si? BYTE io_Error; /* error or warning num */ struct RastPort s i% /* raster port */ struct ColorMap s!i /* color map */ ULONG io_Modes; /* graphics viewport modes */ UWORD io_SrcX; /* source x origin */ UWORD io_SrcY; /* source y origin */ UWORD si /* source x width */ UWORD si /* source x height */ LONG si# /* destination x width */ LONG si% /* destination y height */ UWORD si" /* option flags */ }; #define si5 0x0001 /* DestCols specified in 1/1000" */ #define si5 0x0002 /* DestRows specified in 1/1000" */ #define si5 0x0004 /* make DestCols maximum possible */ #define si5 0x0008 /* make DestRows maximum possible */ #define si7 0x0010 /* DestCols is fraction of FULLCOLS */ #define si7 0x0020 /* DestRows is fraction of FULLROWS */ #define si- 0x0040 /* center image on paper */ #define si3 0x0080 /* ensure correct aspect ratio */ #define si. 0x0100 /* lowest resolution (dpi) */ #define si 0x0200 /* next res */ #define si 0x0300 /* next res */ #define si 0x0400 /* next res */ #define si 0x0500 /* next res */ #define si 0x0600 /* next res */ #define si" 0x0700 /* highest res */ #define si6 0x0800 /* don't eject paper on gfx prints */ #define sI 0x1000 /* don't reset on gfx prints */ /* Compute print size, set 'io_DestCols' and 'io_DestRows' in the calling program's 'IODRPReq' structure and exit, DON'T PRINT. This allows the calling program to see what the final print size would be in printer pixels. Note that it modifies the 'io_DestCols' and 'io_DestRows' fields of your 'IODRPReq' structure. Also, set the print density and update the 'MaxXDots', 'MaxYDots', 'XDotsInch', and 'YDotsInch' fields of the 'PrinterExtendedData' structure. */ #define si" 0x2000 /* see above */ #define si( 0 /* clean exit, no errors */ #define si' 1 /* user cancelled print */ #define si0 2 /* printer cannot output graphics */ #define si 3 /* OBSOLETE */ #define si* 4 /* print dimensions illegal */ #define si 5 /* OBSOLETE */ #define si2 6 /* no memory for internal variables */ #define sIk 7 /* no memory for print buffer */ /* Note : this is an internal error that can be returned from the render function to the printer device. It is NEVER returned to the user. If the printer device sees this error it converts it 'PDERR_NOERR' and exits gracefully. Refer to the document on 'How to Write a Graphics Printer Driver' for more info. */ #define si~ 8 /* took control in case 0 of render */ #define PDERR_DISABLED 9 /* the printer is disabled */ /* internal use */ #define si/ 0x0700 /* masks out density values */ #define i\ uBi\ u2sI struct PrtRegistration { struct Node prg_Node; /* usable node (name in ln_Name) */ struct PrinterData *prg_PData; /* ===READ ONLY=== */ struct DateStamp prg_Date; /* date/time */ ULONG prg_JobID; /* unique id */ LONG prg_UnitNumber; /* unit number for the printer */ ULONG prg_Flags; /* flags */ }; #define PDPRGF_READY (1<<0) /* if it ain't ready - it's waiting */ #define PDPRGF_STOPPED (1<<1) /* this job has been stopped */ #define PDPRGF_ABORTED (1<<2) /* this job has been aborted */ #define PDPRGF_MOVABLEUP (1<<3) /* this job can be moved up in priority */ #define PDPRGF_MOVABLEDOWN (1<<4) /* this job can be moved down in priority */ #define PDPRGF_ERROR (1<<5) /* this job had an error */ struct PrtNotification { struct Message prn_Msg; /* standard message */ struct PrtRegistration *prn_Reg; /* registration structure or NULL */ ULONG prn_Flags; /* flags */ LONG prn_UnitNumber; /* unit number or -1 if N.A. */ }; #define PDPRNF_FIRST (1<<0) /* first one - clear the list */ #define PDPRNF_LAST (1<<1) /* last one - refresh the display */ #define PDPRNF_DISABLED (1<<2) /* unit is disabled */ #define PDPRNF_PAUSED (1<<3) /* unit is paused */ /* PRD_MOVE directions */ #define PDMOVE_UP 1 #define PDMOVE_DOWN -1 /* Printer Tricks */ #define PTRICK_HEADER 1 #define PT_Dummy (TAG_USER+99) #define PT_Buff (PT_Dummy+0x01) #define PT_BuffLen (PT_Dummy+0x02) #endif