# Generated automatically from Makefile.in by configure.
# Makefile for GNU compiler for the Java(TM) language.
#   Copyright (C) 1987, 88, 90-5, 1998, 1999 Free Software Foundation, Inc.

#This file is part of GNU CC.

#GNU CC is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2, or (at your option)
#any later version.

#GNU CC is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#GNU General Public License for more details.

#You should have received a copy of the GNU General Public License
#along with GNU CC; see the file COPYING.  If not, write to
#the Free Software Foundation, 59 Temple Place - Suite 330,
#Boston, MA 02111-1307, USA.

#Java and all Java-based marks are trademarks or registered trademarks
#of Sun Microsystems, Inc. in the United States and other countries.
#The Free Software Foundation is independent of Sun Microsystems, Inc.

# The makefile built from this file lives in the language subdirectory.
# Its purpose is to provide support for:
#
# 1) recursion where necessary, and only then (building .o's), and
# 2) building and debugging cc1 from the language subdirectory, and
# 3) nothing else.
#
# The parent makefile handles all other chores, with help from the
# language makefile fragment, of course.
#
# The targets for external use are:
# all, TAGS, ???mostlyclean, ???clean.

# Suppress smart makes who think they know how to automake Yacc files
.y.c:

# Variables that exist for you to override.
# See below for how to change them for certain systems.

ALLOCA =

# Various ways of specifying flags for compilations:  
# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
# BOOT_CFLAGS is the value of CFLAGS to pass
# to the stage2 and stage3 compilations
# XCFLAGS is used for most compilations but not when using the GCC just built.
XCFLAGS =
CFLAGS = -g
BOOT_CFLAGS = -O $(CFLAGS)
# These exists to be overridden by the x-* and t-* files, respectively.
X_CFLAGS =
T_CFLAGS =

X_CPPFLAGS =
T_CPPFLAGS =

CC = gcc
SET_BISON = here=`pwd`; sdir=`cd $(srcdir) && pwd`; if test -f ../../bison; then bison="$$here/../../bison/bison -L $$sdir"; else bison=bison; fi
BISONFLAGS =
JAVABISONFLAGS = --name-prefix=java_
AR = ar
AR_FLAGS = rc
SHELL = /bin/sh
MAKEINFO = makeinfo
TEXI2DVI = texi2dvi

# Define this as & to perform parallel make on a Sequent.
# Note that this has some bugs, and it seems currently necessary 
# to compile all the gen* files first by hand to avoid erroneous results.
P =

# This is used in the definition of SUBDIR_USE_ALLOCA.
# ??? Perhaps it would be better if it just looked for *gcc*.
OLDCC = cc

# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
# It omits XCFLAGS, and specifies -B./.
# It also specifies -B$(tooldir)/ to find as and ld for a cross compiler.
GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS)

# Tools to use when building a cross-compiler.
# These are used because `configure' appends `cross-make'
# to the makefile when making a cross-compiler.

# We don't use cross-make.  Instead we use the tools
# from the build tree, if they are available.
# program_transform_name and objdir are set by configure.in.
program_transform_name =
objdir = .

#version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < $(srcdir)/version.c`
#mainversion=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`

# Directory where sources are, from where we are.
srcdir = ../../../src/gcc/java
VPATH = ../../../src/gcc/java

# Directory holding libgcj.zip.
prefix = /usr/local
datadir = ${prefix}/share
libgcj_zip = $(datadir)/libgcj.zip

# Additional system libraries to link with.
CLIB=

# Change this to a null string if obstacks are installed in the
# system library.
OBSTACK=obstack.o

# Choose the real default target.
ALL=all

# End of variables for you to override.

# Definition of `all' is here so that new rules inserted by sed
# do not specify the default target.
all: all.indirect

# This tells GNU Make version 3 not to put all variables in the environment.
.NOEXPORT:

# sed inserts variable overrides after the following line.
####target overrides

# Makefile fragment for Storm target.

# Each compilation environment (GCC, SAS/C, StormC, etc) provides its
# own equivalent of the UNIX /usr/include tree.  For gcc, the standard headers
# are in /gg/include and system specific headers are in /gg/os-include.
# Use these paths for fixincludes.

SYSTEM_HEADER_DIR = /gg/include

# Extra object file linked to the cc1* executables.
storm.o: $(srcdir)/config/m68k/storm.c $(CONFIG_H)
	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<

stormsupport.o: $(srcdir)/config/stormsupport.c $(CONFIG_H)
	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<

# We don't need a libgcc1, it's all in our own H&P-libs.

LIBGCC1 =
CROSS_LIBGCC1 =

### end-GG-local
# Handle cpp installation.
INSTALL_CPP=install-cpp
UNINSTALL_CPP=uninstall-cpp
####host overrides

# Makefile fragment for AmigaOS host

# Uncomment the following macro to get a resident GCC. We don't do it
# by default, since we want to support users with mc68000.

RESIDENT = -m68020 -resident32

# The standard additional host flags for the compiler. Since we have
# to build with gcc anyway, we want a well optimized code.

X_CFLAGS = -O2 -fomit-frame-pointer

# Additional host flags that are not used when compiling with GCC_FOR_TARGET,
# such as when compiling the libgcc* runtime archives. GCC uses stack
# a lot, and since AmigaOS provides processes with a small, fixed size
# stack, we have to generate code that will extend it whenever necessary.

XCFLAGS = -mstackextend $(RESIDENT)

# AmigaOS supports "AmigaGuide(R)" hypertext files. For GCC, these are
# build with a custom "makeinfo".

### begin-GG-local: gcc-amigaos
EXTRA_DOC_TARGETS = guide gcc-amigaos-doc
### end-GG-local

# Arrange for guides to be build with GCC, in the build directory.

ALL = all.internal doc

# Actually build guides

guide: cpp.guide gcc.guide

cpp.guide: cpp.texi
	$(MAKEINFO) -I$(srcdir) $(srcdir)/cpp.texi --output=$@ --amiga

gcc.guide: gcc.texi extend.texi install.texi invoke.texi \
		md.texi rtl.texi tm.texi
	$(MAKEINFO) -I$(srcdir) $(srcdir)/gcc.texi --output=$@ --amiga

# Arrange for guides to be installed with GCC.

### begin-GG-local: gcc-amigaos
INSTALL_TARGET=install-normal install-guide install-gcc-amigaos-doc
### end-GG-local

# Where the guide files go

guidedir = $(prefix)/guide

# Actually install guides.

install-guide: doc installdirs
	-if [ -d $(guidedir) ] ; then true ; else mkdir $(guidedir) ; chmod a+rx $(guidedir) ; fi
	-rm -f $(guidedir)/cpp.guide $(guidedir)/gcc.guide
	for f in cpp.guide gcc.guide; \
	do $(INSTALL_DATA) $$f $(guidedir)/$$f; done
	-chmod a-x $(guidedir)/cpp.guide $(guidedir)/gcc.guide

### begin-GG-local: gcc-amigaos
# Build and install gcc-amigaos.guide - documentation specific to the
# AmigaOS port of GCC.

gcc-amigaos-doc: gcc-amigaos.info gcc-amigaos.guide

gcc-amigaos.info: gcc-amigaos.texi
	$(MAKEINFO) -I$(srcdir) $(srcdir)/gcc-amigaos.texi --output=$@

gcc-amigaos.guide: gcc-amigaos.texi
	$(MAKEINFO) -I$(srcdir) $(srcdir)/gcc-amigaos.texi --output=$@ --amiga

install-gcc-amigaos-doc: doc installdirs
	-if [ -d $(guidedir) ] ; then true ; else mkdir $(guidedir) ; chmod a+rx $(guidedir) ; fi
	-rm -f $(infodir)/gcc-amigaos.info* $(guidedir)/gcc-amigaos.guide
	for f in gcc-amigaos.info*; \
	do $(INSTALL_DATA) $$f $(infodir)/$$f; done
	$(INSTALL_DATA) gcc-amigaos.guide $(guidedir)
	-chmod a-x $(infodir)/gcc-amigaos.info* $(guidedir)/gcc-amigaos.guide
### end-GG-local
####cross overrides

####build overrides

####site overrides
#
# Now figure out from those variables how to compile and link.

all.indirect: Makefile ../jc1$(exeext) ../jcf-dump$(exeext) \
	../jvgenmain$(exeext) ../gcjh$(exeext) ../jv-scan$(exeext)

# IN_GCC tells obstack.h that we are using gcc's <stddef.h> file.
INTERNAL_CFLAGS = $(CROSS) -DIN_GCC 

# This is the variable actually used when we compile.
ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS)

# Likewise.
ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS)

SUBDIR_OBSTACK = `if [ x$(OBSTACK) != x ]; then echo ../$(OBSTACK); else true; fi`
SUBDIR_USE_ALLOCA = `case "${CC}" in "${OLDCC}") if [ x$(ALLOCA) != x ]; then echo ../$(ALLOCA); else true; fi ;; esac`
SUBDIR_MALLOC = `if [ x$(MALLOC) != x ]; then echo ../$(MALLOC); else true; fi`

# How to link with both our special library facilities
# and the system's installed libraries.
LIBS = $(SUBDIR_OBSTACK) $(SUBDIR_USE_ALLOCA) $(SUBDIR_MALLOC) $(CLIB)

# Specify the directories to be searched for header files.
# Both . and srcdir are used, in that order,
# so that tm.h and config.h will be found in the compilation
# subdirectory rather than in the source directory.
INCLUDES = -I. -I.. -I$(srcdir) -I$(srcdir)/.. -I$(srcdir)/../config -I$(srcdir)/../../include

# Always use -I$(srcdir)/config when compiling.
.c.o:
	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<

#
# Lists of files for various purposes.

# Language-specific object files for Gcc/Java:

# Remember to keep this list in sync with JAVA_SRCS in Make-lang.in!!!
#
JAVA_OBJS = parse.o class.o decl.o expr.o constants.o lang.o typeck.o \
  except.o verify.o zextract.o jcf-io.o jcf-parse.o mangle.o jcf-write.o \
  buffer.o check-init.o jcf-depend.o jcf-path.o xref.o

JAVA_OBJS_LITE = parse-scan.o jv-scan.o

LIBS = ../../libiberty/libiberty.a
LIBDEPS = $(LIBS)

# Language-independent object files.
OBJS = `cat ../stamp-objlist`
OBJDEPS = ../stamp-objlist

compiler: ../jc1$(exeext) ../jv-scan$(exeext)
../jc1$(exeext): $(P) $(JAVA_OBJS) $(OBJDEPS) $(LIBDEPS)
	rm -f ../jc1$(exeext)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \
	      $(JAVA_OBJS) $(OBJS) $(SUBDIR_OBSTACK) $(LIBS)
../jv-scan$(exeext): $(P) $(JAVA_OBJS_LITE) $(OBJDEPS) $(LIBDEPS)
	rm -f ../jv-scan$(exeext)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \
	      $(JAVA_OBJS_LITE) $(SUBDIR_OBSTACK) $(LIBS)

../jcf-dump$(exeext): jcf-dump.o jcf-io.o jcf-depend.o jcf-path.o \
		zextract.o
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ jcf-dump.o jcf-io.o \
	  jcf-depend.o jcf-path.o zextract.o $(LIBS)

# Dependencies here must be kept in sync with dependencies in Make-lang.in.
../jvgenmain$(exeext):  jvgenmain.o mangle.o $(LIBDEPS)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ jvgenmain.o mangle.o ../obstack.o $(LIBS)

../gcjh$(exeext): gjavah.o jcf-io.o jcf-depend.o jcf-path.o \
		zextract.o $(LIBDEPS)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gjavah.o jcf-io.o \
	  jcf-depend.o jcf-path.o zextract.o $(LIBS)

Makefile: $(srcdir)/Makefile.in $(srcdir)/../configure
	cd ..; $(SHELL) config.status

native: config.status ../jc1$(exeext)
#
# Compiling object files from source files.
TREE_H = $(srcdir)/../tree.h $(srcdir)/../real.h $(srcdir)/../tree.def \
        $(srcdir)/../machmode.h $(srcdir)/../machmode.def ../tree-check.h
JAVA_TREE_H = $(TREE_H) java-tree.h java-tree.def
RTL_H = $(srcdir)/../rtl.h $(srcdir)/../rtl.def \
        $(srcdir)/../machmode.h $(srcdir)/../machmode.def ../genrtl.h
EXPR_H = $(srcdir)/../expr.h ../insn-codes.h

# Separating PARSE_DIR from PARSE_RELDIR lets us easily change the
# code to support building parse.c in the build directory, at some
# expense in readability.
PARSE_DIR = $(srcdir)
PARSE_RELDIR = .
PARSE_C = $(PARSE_DIR)/parse.c
PARSE_SCAN_C = $(PARSE_DIR)/parse-scan.c
PARSE_H = $(srcdir)/parse.h

$(PARSE_C):  $(srcdir)/parse.y $(srcdir)/lex.c $(PARSE_H) $(srcdir)/lex.h
	$(SET_BISON); \
	cd $(PARSE_DIR) && $$bison -t $(BISONFLAGS) $(JAVABISONFLAGS) \
	    -o parse.c $(PARSE_RELDIR)/parse.y
$(PARSE_SCAN_C):  $(srcdir)/parse-scan.y $(srcdir)/lex.c $(PARSE_H) \
	  $(srcdir)/lex.h
	$(SET_BISON); \
	cd $(PARSE_DIR) && $$bison -t $(BISONFLAGS) -o parse-scan.c \
	    $(PARSE_RELDIR)/parse-scan.y

lex.c: keyword.h lex.h

lang.o: $(srcdir)/java-tree.def

keyword.h: keyword.gperf
	gperf -L C -F ', 0' -p -t -j1 -i 1 -g -o -N java_keyword -k1,3,$$ \
	keyword.gperf > keyword.h

jcf-path.o : jcf-path.c $(CONFIG_H) $(srcdir)/../system.h jcf.h
	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
	  -DLIBGCJ_ZIP_FILE='"$(libgcj_zip)"' $(srcdir)/jcf-path.c

# These exist for maintenance purposes.

# Update the tags table.
TAGS: force
	cd $(srcdir) ;				\
	etags *.c *.h ;				\
	echo 'l' | tr 'l' '\f' >> TAGS ;	\
	echo 'parse.y,0' >> TAGS ; 		\
	etags -a ../*.h ../*.c;

.PHONY: TAGS

mostlyclean:
	rm -f *.o

clean:  mostlyclean

force:

parse.o : $(PARSE_C) jcf-reader.c $(CONFIG_H) $(srcdir)/../system.h
jcf-dump.o : $(CONFIG_H) $(srcdir)/../system.h $(JAVA_TREE_H) jcf-dump.c \
  jcf-reader.c jcf.h javaop.h javaop.def
gjavah.o : $(CONFIG_H) $(srcdir)/../system.h $(JAVA_TREE_H) gjavah.c \
  jcf-reader.c jcf.h javaop.h
buffer.o : buffer.c $(CONFIG_H) buffer.h $(srcdir)/../gansidecl.h \
  $(srcdir)/../system.h $(srcdir)/../toplev.h
check-init.o : check-init.c $(CONFIG_H) $(srcdir)/../gansidecl.h \
  $(srcdir)/../../include/libiberty.h $(JAVA_TREE_H) \
  $(srcdir)/../system.h $(srcdir)/../toplev.h
class.o : class.c $(CONFIG_H) $(JAVA_TREE_H) $(RTL_H) jcf.h $(PARSE_H) \
  $(srcdir)/../gansidecl.h $(srcdir)/../toplev.h $(srcdir)/../system.h \
  $(srcdir)/../output.h
constants.o : constants.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h \
  $(srcdir)/../toplev.h $(srcdir)/../system.h
decl.o : decl.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h \
  $(srcdir)/../toplev.h $(srcdir)/../system.h
except.o : except.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h $(srcdir)/../real.h \
  $(RTL_H) javaop.h java-opcodes.h $(srcdir)/../except.h java-except.h \
  $(srcdir)/../eh-common.h $(srcdir)/../toplev.h $(srcdir)/../system.h
expr.o : expr.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h $(srcdir)/../real.h \
  $(RTL_H) $(EXPR_H) javaop.h java-opcodes.h $(srcdir)/../except.h \
  java-except.h java-except.h parse.h $(srcdir)/../toplev.h \
  $(srcdir)/../system.h
jcf-depend.o : jcf-depend.c $(CONFIG_H) $(srcdir)/../system.h jcf.h
jcf-io.o : jcf-io.c $(CONFIG_H) $(srcdir)/../system.h $(JAVA_TREE_H)
jcf-parse.o : jcf-parse.c $(CONFIG_H) $(JAVA_TREE_H) $(srcdir)/../flags.h \
  $(srcdir)/../input.h java-except.h $(srcdir)/../system.h \
  $(srcdir)/../toplev.h $(PARSE_H)
jcf-write.o : jcf-write.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h $(RTL_H) \
  java-opcodes.h parse.h buffer.h $(srcdir)/../system.h $(srcdir)/../toplev.h
jv-scan.o : jv-scan.c $(CONFIG_H) $(srcdir)/../system.h
jvgenmain.o : jvgenmain.c $(CONFIG_H) $(srcdir)/../system.h
lang.o : lang.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h $(srcdir)/../input.h \
  $(srcdir)/../toplev.h $(srcdir)/../system.h
mangle.o : mangle.c $(CONFIG_H) jcf.h $(JAVA_TREE_H) $(srcdir)/../system.h \
  $(srcdir)/../toplev.h
parse-scan.o : $(CONFIG_H) $(srcdir)/../system.h $(srcdir)/../toplev.h
typeck.o : typeck.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h convert.h \
  $(srcdir)/../toplev.h $(srcdir)/../system.h
verify.o : verify.c $(CONFIG_H) $(JAVA_TREE_H) jcf.h javaop.h java-opcodes.h \
  java-except.h $(srcdir)/../toplev.h $(srcdir)/../system.h
xref.o : xref.h $(CONFIG_H) $(JAVA_TREE_H) $(srcdir)/../toplev.h \
  $(srcdir)/../system.h
zextract.o : zextract.c $(CONFIG_H) $(srcdir)/../system.h zipfile.h