/* A Bison parser, made from /5g/ian/binutils/release/copy/gas/./itbl-parse.y by GNU Bison version 1.25 */ #define YYBISON 1 /* Identify Bison output. */ #define DREG 258 #define CREG 259 #define GREG 260 #define IMMED 261 #define ADDR 262 #define INSN 263 #define NUM 264 #define ID 265 #define NL 266 #define PNUM 267 #line 21 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" /* Yacc grammar for instruction table entries. ======================================================================= Original Instruction table specification document: MIPS Coprocessor Table Specification ==================================== This document describes the format of the MIPS coprocessor table. The table specifies a list of valid functions, data registers and control registers that can be used in coprocessor instructions. This list, together with the coprocessor instruction classes listed below, specifies the complete list of coprocessor instructions that will be recognized and assembled by the GNU assembler. In effect, this makes the GNU assembler table-driven, where the table is specified by the programmer. The table is an ordinary text file that the GNU assembler reads when it starts. Using the information in the table, the assembler generates an internal list of valid coprocessor registers and functions. The assembler uses this internal list in addition to the standard MIPS registers and instructions which are built-in to the assembler during code generation. To specify the coprocessor table when invoking the GNU assembler, use the command line option "--itbl file", where file is the complete name of the table, including path and extension. Examples: gas -t cop.tbl test.s -o test.o gas -t /usr/local/lib/cop.tbl test.s -o test.o gas --itbl d:\gnu\data\cop.tbl test.s -o test.o Only one table may be supplied during a single invocation of the assembler. Instruction classes =================== Below is a list of the valid coprocessor instruction classes for any given coprocessor "z". These instructions are already recognized by the assembler, and are listed here only for reference. Class format instructions ------------------------------------------------- Class1: op base rt offset LWCz rt,offset (base) SWCz rt,offset (base) Class2: COPz sub rt rd 0 MTCz rt,rd MFCz rt,rd CTCz rt,rd CFCz rt,rd Class3: COPz CO cofun COPz cofun Class4: COPz BC br offset BCzT offset BCzF offset Class5: COPz sub rt rd 0 DMFCz rt,rd DMTCz rt,rd Class6: op base rt offset LDCz rt,offset (base) SDCz rt,offset (base) Class7: COPz BC br offset BCzTL offset BCzFL offset The coprocessor table defines coprocessor-specific registers that can be used with all of the above classes of instructions, where appropriate. It also defines additional coprocessor-specific functions for Class3 (COPz cofun) instructions, Thus, the table allows the programmer to use convenient mnemonics and operands for these functions, instead of the COPz mmenmonic and cofun operand. The names of the MIPS general registers and their aliases are defined by the assembler and will be recognized as valid register names by the assembler when used (where allowed) in coprocessor instructions. However, the names and values of all coprocessor data and control register mnemonics must be specified in the coprocessor table. Table Grammar ============= Here is the grammar for the coprocessor table: table -> entry* entry -> [z entrydef] [comment] '\n' entrydef -> type name val entrydef -> 'insn' name val funcdef ; type of entry (instruction) z -> 'p'['0'..'3'] ; processor number type -> ['dreg' | 'creg' | 'greg' ] ; type of entry (register) ; 'dreg', 'creg' or 'greg' specifies a data, control, or general ; register mnemonic, respectively name -> [ltr|dec]* ; mnemonic of register/function val -> [dec|hex] ; register/function number (integer constant) funcdef -> frange flags fields ; bitfield range for opcode ; list of fields' formats fields -> field* field -> [','] ftype frange flags flags -> ['*' flagexpr] flagexpr -> '[' flagexpr ']' flagexpr -> val '|' flagexpr ftype -> [ type | 'immed' | 'addr' ] ; 'immed' specifies an immediate value; see grammar for "val" above ; 'addr' specifies a C identifier; name of symbol to be resolved at ; link time frange -> ':' val '-' val ; starting to ending bit positions, where ; where 0 is least significant bit frange -> (null) ; default range of 31-0 will be assumed comment -> [';'|'#'] [char]* char -> any printable character ltr -> ['a'..'z'|'A'..'Z'] dec -> ['0'..'9']* ; value in decimal hex -> '0x'['0'..'9' | 'a'..'f' | 'A'..'F']* ; value in hexidecimal Examples ======== Example 1: The table: p1 dreg d1 1 ; data register "d1" for COP1 has value 1 p1 creg c3 3 ; ctrl register "c3" for COP1 has value 3 p3 func fill 0x1f:24-20 ; function "fill" for COP3 has value 31 and ; no fields will allow the assembler to accept the following coprocessor instructions: LWC1 d1,0x100 ($2) fill Here, the general purpose register "$2", and instruction "LWC1", are standard mnemonics built-in to the MIPS assembler. Example 2: The table: p3 dreg d3 3 ; data register "d3" for COP3 has value 3 p3 creg c2 22 ; control register "c2" for COP3 has value 22 p3 func fee 0x1f:24-20 dreg:17-13 creg:12-8 immed:7-0 ; function "fee" for COP3 has value 31, and 3 fields ; consisting of a data register, a control register, ; and an immediate value. will allow the assembler to accept the following coprocessor instruction: fee d3,c2,0x1 and will emit the object code: 31-26 25 24-20 19-18 17-13 12-8 7-0 COPz CO fun dreg creg immed 010011 1 11111 00 00011 10110 00000001 0x4ff07601 Example 3: The table: p3 dreg d3 3 ; data register "d3" for COP3 has value 3 p3 creg c2 22 ; control register "c2" for COP3 has value 22 p3 func fuu 0x01f00001 dreg:17-13 creg:12-8 will allow the assembler to accept the following coprocessor instruction: fuu d3,c2 and will emit the object code: 31-26 25 24-20 19-18 17-13 12-8 7-0 COPz CO fun dreg creg 010011 1 11111 00 00011 10110 00000001 0x4ff07601 In this way, the programmer can force arbitrary bits of an instruction to have predefined values. ======================================================================= Additional notes: Encoding of ranges: To handle more than one bit position range within an instruction, use 0s to mask out the ranges which don't apply. May decide to modify the syntax to allow commas separate multiple ranges within an instruction (range','range). Changes in grammar: The number of parms argument to the function entry was deleted from the original format such that we now count the fields. ---- FIXME! should really change lexical analyzer to recognize 'dreg' etc. in context sensative way. Currently function names or mnemonics may be incorrectly parsed as keywords FIXME! hex is ambiguous with any digit */ #include #include "itbl-ops.h" /* #define DEBUG */ #ifdef DEBUG #ifndef DBG_LVL #define DBG_LVL 1 #endif #else #define DBG_LVL 0 #endif #if DBG_LVL >= 1 #define DBG(x) printf x #else #define DBG(x) #endif #if DBG_LVL >= 2 #define DBGL2(x) printf x #else #define DBGL2(x) #endif static int sbit, ebit; static struct itbl_entry *insn=0; extern int insntbl_line; int yyparse PARAMS ((void)); int yylex PARAMS ((void)); static int yyerror PARAMS ((const char *)); #line 283 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" typedef union { char *str; int num; int processor; unsigned long val; } YYSTYPE; #include #ifndef __cplusplus #ifndef __STDC__ #define const #endif #endif #define YYFINAL 51 #define YYFLAG -32768 #define YYNTBASE 20 #define YYTRANSLATE(x) ((unsigned)(x) <= 267 ? yytranslate[x] : 34) static const char yytranslate[] = { 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 17, 2, 13, 19, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 18, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 15, 2, 16, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 14, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 }; #if YYDEBUG != 0 static const short yyprhs[] = { 0, 0, 2, 5, 6, 12, 13, 23, 25, 28, 32, 35, 36, 38, 40, 42, 46, 50, 54, 56, 59, 60, 65, 66, 68, 70, 72, 74, 76, 78 }; static const short yyrhs[] = { 21, 0, 22, 21, 0, 0, 30, 31, 32, 33, 11, 0, 0, 30, 8, 32, 33, 29, 28, 23, 24, 11, 0, 11, 0, 1, 11, 0, 13, 26, 24, 0, 26, 24, 0, 0, 31, 0, 7, 0, 6, 0, 25, 29, 28, 0, 9, 14, 27, 0, 15, 27, 16, 0, 9, 0, 17, 27, 0, 0, 18, 9, 19, 9, 0, 0, 12, 0, 3, 0, 4, 0, 5, 0, 10, 0, 9, 0, 9, 0 }; #endif #if YYDEBUG != 0 static const short yyrline[] = { 0, 300, 304, 306, 309, 316, 323, 324, 325, 328, 330, 331, 334, 340, 345, 352, 361, 366, 370, 376, 382, 388, 395, 402, 410, 416, 421, 428, 436, 444 }; #endif #if YYDEBUG != 0 || defined (YYERROR_VERBOSE) static const char * const yytname[] = { "$","error","$undefined.","DREG","CREG", "GREG","IMMED","ADDR","INSN","NUM","ID","NL","PNUM","','","'|'","'['","']'", "'*'","':'","'-'","insntbl","entrys","entry","@1","fieldspecs","ftype","fieldspec", "flagexpr","flags","range","pnum","regtype","name","value", NULL }; #endif static const short yyr1[] = { 0, 20, 21, 21, 22, 23, 22, 22, 22, 24, 24, 24, 25, 25, 25, 26, 27, 27, 27, 28, 28, 29, 29, 30, 31, 31, 31, 32, -1, 33 }; static const short yyr2[] = { 0, 1, 2, 0, 5, 0, 9, 1, 2, 3, 2, 0, 1, 1, 1, 3, 3, 3, 1, 2, 0, 4, 0, 1, 1, 1, 1, 1, 1, 1 }; static const short yydefact[] = { 0, 0, 7, 23, 1, 0, 0, 8, 2, 24, 25, 26, 0, 0, 27, 0, 0, 29, 22, 0, 0, 20, 4, 0, 0, 5, 0, 18, 0, 19, 11, 21, 0, 0, 14, 13, 0, 0, 22, 11, 12, 16, 17, 11, 6, 20, 10, 9, 15, 0, 0, 0 }; static const short yydefgoto[] = { 49, 4, 5, 30, 37, 38, 39, 29, 25, 21, 6, 40, 15, 18 }; static const short yypact[] = { 0, -9,-32768,-32768,-32768, 0, 12,-32768,-32768,-32768,-32768, -32768, 3, 3,-32768, 9, 9,-32768, -8, 8, 19, 15,-32768, 10, -6,-32768, 24, 20, -6,-32768, 1, -32768, -6, 21,-32768,-32768, 18, 25, -8, 1,-32768, -32768,-32768, 1,-32768, 15,-32768,-32768,-32768, 35, 38, -32768 }; static const short yypgoto[] = {-32768, 34,-32768,-32768, -13,-32768, 4, -1, -4, 5,-32768, 36, 31, 29 }; #define YYLAST 45 static const short yytable[] = { -3, 1, 7, 27, 9, 10, 11, 34, 35, 28, 20, 2, 3, 14, 36, 9, 10, 11, 17, 22, 12, 9, 10, 11, 34, 35, 46, 33, 23, 26, 47, 41, 24, 31, 32, 50, 44, 42, 51, 8, 43, 48, 13, 45, 16, 19 }; static const short yycheck[] = { 0, 1, 11, 9, 3, 4, 5, 6, 7, 15, 18, 11, 12, 10, 13, 3, 4, 5, 9, 11, 8, 3, 4, 5, 6, 7, 39, 28, 9, 19, 43, 32, 17, 9, 14, 0, 11, 16, 0, 5, 36, 45, 6, 38, 13, 16 }; /* -*-C-*- Note some compilers choke on comments on `#line' lines. */ #line 3 "/usr/cygnus/progressive-97r2/share/bison.simple" /* Skeleton output parser for bison, Copyright (C) 1984, 1989, 1990 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* As a special exception, when this file is copied by Bison into a Bison output file, you may use that output file without restriction. This special exception was added by the Free Software Foundation in version 1.24 of Bison. */ #ifndef alloca #if defined (__GNUC__) && !defined (C_ALLOCA) #define alloca __builtin_alloca #else /* not GNU C. */ #if defined (HAVE_ALLOCA_H) && !defined (C_ALLOCA) #include #else /* not sparc */ #if defined (MSDOS) && !defined (__TURBOC__) #include #else /* not MSDOS, or __TURBOC__ */ #if defined(_AIX) #include #pragma alloca #else /* not MSDOS, __TURBOC__, or _AIX */ #ifdef __hpux #ifdef __cplusplus extern "C" { void *alloca (unsigned int); }; #else /* not __cplusplus */ void *alloca (); #endif /* not __cplusplus */ #endif /* __hpux */ #endif /* not _AIX */ #endif /* not MSDOS, or __TURBOC__ */ #endif /* not sparc. */ #endif /* not GNU C. */ #endif /* alloca not defined. */ /* This is the parser code that is written into each bison parser when the %semantic_parser declaration is not specified in the grammar. It was written by Richard Stallman by simplifying the hairy parser used when %semantic_parser is specified. */ /* Note: there must be only one dollar sign in this file. It is replaced by the list of actions, each action as one case of the switch. */ #define yyerrok (yyerrstatus = 0) #define yyclearin (yychar = YYEMPTY) #define YYEMPTY -2 #define YYEOF 0 #define YYACCEPT return(0) #define YYABORT return(1) #define YYERROR goto yyerrlab1 /* Like YYERROR except do call yyerror. This remains here temporarily to ease the transition to the new meaning of YYERROR, for GCC. Once GCC version 2 has supplanted version 1, this can go. */ #define YYFAIL goto yyerrlab #define YYRECOVERING() (!!yyerrstatus) #define YYBACKUP(token, value) \ do \ if (yychar == YYEMPTY && yylen == 1) \ { yychar = (token), yylval = (value); \ yychar1 = YYTRANSLATE (yychar); \ YYPOPSTACK; \ goto yybackup; \ } \ else \ { yyerror ("syntax error: cannot back up"); YYERROR; } \ while (0) #define YYTERROR 1 #define YYERRCODE 256 #ifndef YYPURE #define YYLEX yylex() #endif #ifdef YYPURE #ifdef YYLSP_NEEDED #ifdef YYLEX_PARAM #define YYLEX yylex(&yylval, &yylloc, YYLEX_PARAM) #else #define YYLEX yylex(&yylval, &yylloc) #endif #else /* not YYLSP_NEEDED */ #ifdef YYLEX_PARAM #define YYLEX yylex(&yylval, YYLEX_PARAM) #else #define YYLEX yylex(&yylval) #endif #endif /* not YYLSP_NEEDED */ #endif /* If nonreentrant, generate the variables here */ #ifndef YYPURE int yychar; /* the lookahead symbol */ YYSTYPE yylval; /* the semantic value of the */ /* lookahead symbol */ #ifdef YYLSP_NEEDED YYLTYPE yylloc; /* location data for the lookahead */ /* symbol */ #endif int yynerrs; /* number of parse errors so far */ #endif /* not YYPURE */ #if YYDEBUG != 0 int yydebug; /* nonzero means print parse trace */ /* Since this is uninitialized, it does not stop multiple parsers from coexisting. */ #endif /* YYINITDEPTH indicates the initial size of the parser's stacks */ #ifndef YYINITDEPTH #define YYINITDEPTH 200 #endif /* YYMAXDEPTH is the maximum size the stacks can grow to (effective only if the built-in stack extension method is used). */ #if YYMAXDEPTH == 0 #undef YYMAXDEPTH #endif #ifndef YYMAXDEPTH #define YYMAXDEPTH 10000 #endif /* Prevent warning if -Wstrict-prototypes. */ #ifdef __GNUC__ int yyparse (void); #endif #if __GNUC__ > 1 /* GNU C and GNU C++ define this. */ #define __yy_memcpy(TO,FROM,COUNT) __builtin_memcpy(TO,FROM,COUNT) #else /* not GNU C or C++ */ #ifndef __cplusplus /* This is the most reliable way to avoid incompatibilities in available built-in functions on various systems. */ static void __yy_memcpy (to, from, count) char *to; char *from; int count; { register char *f = from; register char *t = to; register int i = count; while (i-- > 0) *t++ = *f++; } #else /* __cplusplus */ /* This is the most reliable way to avoid incompatibilities in available built-in functions on various systems. */ static void __yy_memcpy (char *to, char *from, int count) { register char *f = from; register char *t = to; register int i = count; while (i-- > 0) *t++ = *f++; } #endif #endif #line 196 "/usr/cygnus/progressive-97r2/share/bison.simple" /* The user can define YYPARSE_PARAM as the name of an argument to be passed into yyparse. The argument should have type void *. It should actually point to an object. Grammar actions can access the variable by casting it to the proper pointer type. */ #ifdef YYPARSE_PARAM #ifdef __cplusplus #define YYPARSE_PARAM_ARG void *YYPARSE_PARAM #define YYPARSE_PARAM_DECL #else /* not __cplusplus */ #define YYPARSE_PARAM_ARG YYPARSE_PARAM #define YYPARSE_PARAM_DECL void *YYPARSE_PARAM; #endif /* not __cplusplus */ #else /* not YYPARSE_PARAM */ #define YYPARSE_PARAM_ARG #define YYPARSE_PARAM_DECL #endif /* not YYPARSE_PARAM */ int yyparse(YYPARSE_PARAM_ARG) YYPARSE_PARAM_DECL { register int yystate; register int yyn; register short *yyssp; register YYSTYPE *yyvsp; int yyerrstatus; /* number of tokens to shift before error messages enabled */ int yychar1 = 0; /* lookahead token as an internal (translated) token number */ short yyssa[YYINITDEPTH]; /* the state stack */ YYSTYPE yyvsa[YYINITDEPTH]; /* the semantic value stack */ short *yyss = yyssa; /* refer to the stacks thru separate pointers */ YYSTYPE *yyvs = yyvsa; /* to allow yyoverflow to reallocate them elsewhere */ #ifdef YYLSP_NEEDED YYLTYPE yylsa[YYINITDEPTH]; /* the location stack */ YYLTYPE *yyls = yylsa; YYLTYPE *yylsp; #define YYPOPSTACK (yyvsp--, yyssp--, yylsp--) #else #define YYPOPSTACK (yyvsp--, yyssp--) #endif int yystacksize = YYINITDEPTH; #ifdef YYPURE int yychar; YYSTYPE yylval; int yynerrs; #ifdef YYLSP_NEEDED YYLTYPE yylloc; #endif #endif YYSTYPE yyval; /* the variable used to return */ /* semantic values from the action */ /* routines */ int yylen; #if YYDEBUG != 0 if (yydebug) fprintf(stderr, "Starting parse\n"); #endif yystate = 0; yyerrstatus = 0; yynerrs = 0; yychar = YYEMPTY; /* Cause a token to be read. */ /* Initialize stack pointers. Waste one element of value and location stack so that they stay on the same level as the state stack. The wasted elements are never initialized. */ yyssp = yyss - 1; yyvsp = yyvs; #ifdef YYLSP_NEEDED yylsp = yyls; #endif /* Push a new state, which is found in yystate . */ /* In all cases, when you get here, the value and location stacks have just been pushed. so pushing a state here evens the stacks. */ yynewstate: *++yyssp = yystate; if (yyssp >= yyss + yystacksize - 1) { /* Give user a chance to reallocate the stack */ /* Use copies of these so that the &'s don't force the real ones into memory. */ YYSTYPE *yyvs1 = yyvs; short *yyss1 = yyss; #ifdef YYLSP_NEEDED YYLTYPE *yyls1 = yyls; #endif /* Get the current used size of the three stacks, in elements. */ int size = yyssp - yyss + 1; #ifdef yyoverflow /* Each stack pointer address is followed by the size of the data in use in that stack, in bytes. */ #ifdef YYLSP_NEEDED /* This used to be a conditional around just the two extra args, but that might be undefined if yyoverflow is a macro. */ yyoverflow("parser stack overflow", &yyss1, size * sizeof (*yyssp), &yyvs1, size * sizeof (*yyvsp), &yyls1, size * sizeof (*yylsp), &yystacksize); #else yyoverflow("parser stack overflow", &yyss1, size * sizeof (*yyssp), &yyvs1, size * sizeof (*yyvsp), &yystacksize); #endif yyss = yyss1; yyvs = yyvs1; #ifdef YYLSP_NEEDED yyls = yyls1; #endif #else /* no yyoverflow */ /* Extend the stack our own way. */ if (yystacksize >= YYMAXDEPTH) { yyerror("parser stack overflow"); return 2; } yystacksize *= 2; if (yystacksize > YYMAXDEPTH) yystacksize = YYMAXDEPTH; yyss = (short *) alloca (yystacksize * sizeof (*yyssp)); __yy_memcpy ((char *)yyss, (char *)yyss1, size * sizeof (*yyssp)); yyvs = (YYSTYPE *) alloca (yystacksize * sizeof (*yyvsp)); __yy_memcpy ((char *)yyvs, (char *)yyvs1, size * sizeof (*yyvsp)); #ifdef YYLSP_NEEDED yyls = (YYLTYPE *) alloca (yystacksize * sizeof (*yylsp)); __yy_memcpy ((char *)yyls, (char *)yyls1, size * sizeof (*yylsp)); #endif #endif /* no yyoverflow */ yyssp = yyss + size - 1; yyvsp = yyvs + size - 1; #ifdef YYLSP_NEEDED yylsp = yyls + size - 1; #endif #if YYDEBUG != 0 if (yydebug) fprintf(stderr, "Stack size increased to %d\n", yystacksize); #endif if (yyssp >= yyss + yystacksize - 1) YYABORT; } #if YYDEBUG != 0 if (yydebug) fprintf(stderr, "Entering state %d\n", yystate); #endif goto yybackup; yybackup: /* Do appropriate processing given the current state. */ /* Read a lookahead token if we need one and don't already have one. */ /* yyresume: */ /* First try to decide what to do without reference to lookahead token. */ yyn = yypact[yystate]; if (yyn == YYFLAG) goto yydefault; /* Not known => get a lookahead token if don't already have one. */ /* yychar is either YYEMPTY or YYEOF or a valid token in external form. */ if (yychar == YYEMPTY) { #if YYDEBUG != 0 if (yydebug) fprintf(stderr, "Reading a token: "); #endif yychar = YYLEX; } /* Convert token to internal form (in yychar1) for indexing tables with */ if (yychar <= 0) /* This means end of input. */ { yychar1 = 0; yychar = YYEOF; /* Don't call YYLEX any more */ #if YYDEBUG != 0 if (yydebug) fprintf(stderr, "Now at end of input.\n"); #endif } else { yychar1 = YYTRANSLATE(yychar); #if YYDEBUG != 0 if (yydebug) { fprintf (stderr, "Next token is %d (%s", yychar, yytname[yychar1]); /* Give the individual parser a way to print the precise meaning of a token, for further debugging info. */ #ifdef YYPRINT YYPRINT (stderr, yychar, yylval); #endif fprintf (stderr, ")\n"); } #endif } yyn += yychar1; if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != yychar1) goto yydefault; yyn = yytable[yyn]; /* yyn is what to do for this token type in this state. Negative => reduce, -yyn is rule number. Positive => shift, yyn is new state. New state is final state => don't bother to shift, just return success. 0, or most negative number => error. */ if (yyn < 0) { if (yyn == YYFLAG) goto yyerrlab; yyn = -yyn; goto yyreduce; } else if (yyn == 0) goto yyerrlab; if (yyn == YYFINAL) YYACCEPT; /* Shift the lookahead token. */ #if YYDEBUG != 0 if (yydebug) fprintf(stderr, "Shifting token %d (%s), ", yychar, yytname[yychar1]); #endif /* Discard the token being shifted unless it is eof. */ if (yychar != YYEOF) yychar = YYEMPTY; *++yyvsp = yylval; #ifdef YYLSP_NEEDED *++yylsp = yylloc; #endif /* count tokens shifted since error; after three, turn off error status. */ if (yyerrstatus) yyerrstatus--; yystate = yyn; goto yynewstate; /* Do the default action for the current state. */ yydefault: yyn = yydefact[yystate]; if (yyn == 0) goto yyerrlab; /* Do a reduction. yyn is the number of a rule to reduce with. */ yyreduce: yylen = yyr2[yyn]; if (yylen > 0) yyval = yyvsp[1-yylen]; /* implement default value of the action */ #if YYDEBUG != 0 if (yydebug) { int i; fprintf (stderr, "Reducing via rule %d (line %d), ", yyn, yyrline[yyn]); /* Print the symbols being reduced, and their result. */ for (i = yyprhs[yyn]; yyrhs[i] > 0; i++) fprintf (stderr, "%s ", yytname[yyrhs[i]]); fprintf (stderr, " -> %s\n", yytname[yyr1[yyn]]); } #endif switch (yyn) { case 4: #line 311 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBG (("line %d: entry pnum=%d type=%d name=%s value=x%x\n", insntbl_line, yyvsp[-4].num, yyvsp[-3].num, yyvsp[-2].str, yyvsp[-1].val)); itbl_add_reg (yyvsp[-4].num, yyvsp[-3].num, yyvsp[-2].str, yyvsp[-1].val); ; break;} case 5: #line 317 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBG (("line %d: entry pnum=%d type=INSN name=%s value=x%x", insntbl_line, yyvsp[-5].num, yyvsp[-3].str, yyvsp[-2].val)); DBG ((" sbit=%d ebit=%d flags=0x%x\n", sbit, ebit, yyvsp[0].val)); insn=itbl_add_insn (yyvsp[-5].num, yyvsp[-3].str, yyvsp[-2].val, sbit, ebit, yyvsp[0].val); ; break;} case 12: #line 336 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBGL2 (("ftype\n")); yyval.num = yyvsp[0].num; ; break;} case 13: #line 341 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBGL2 (("addr\n")); yyval.num = ADDR; ; break;} case 14: #line 346 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBGL2 (("immed\n")); yyval.num = IMMED; ; break;} case 15: #line 354 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBG (("line %d: field type=%d sbit=%d ebit=%d, flags=0x%x\n", insntbl_line, yyvsp[-2].num, sbit, ebit, yyvsp[0].val)); itbl_add_operand (insn, yyvsp[-2].num, sbit, ebit, yyvsp[0].val); ; break;} case 16: #line 363 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { yyval.val = yyvsp[-2].num | yyvsp[0].val; ; break;} case 17: #line 367 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { yyval.val = yyvsp[-1].val; ; break;} case 18: #line 371 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { yyval.val = yyvsp[0].num; ; break;} case 19: #line 378 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBGL2 (("flags=%d\n", yyvsp[0].val)); yyval.val = yyvsp[0].val; ; break;} case 20: #line 383 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { yyval.val = 0; ; break;} case 21: #line 390 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBGL2 (("range %d %d\n", yyvsp[-2].num, yyvsp[0].num)); sbit = yyvsp[-2].num; ebit = yyvsp[0].num; ; break;} case 22: #line 396 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { sbit = 31; ebit = 0; ; break;} case 23: #line 404 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBGL2 (("pnum=%d\n",yyvsp[0].num)); yyval.num = yyvsp[0].num; ; break;} case 24: #line 412 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBGL2 (("dreg\n")); yyval.num = DREG; ; break;} case 25: #line 417 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBGL2 (("creg\n")); yyval.num = CREG; ; break;} case 26: #line 422 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBGL2 (("greg\n")); yyval.num = GREG; ; break;} case 27: #line 430 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBGL2 (("name=%s\n",yyvsp[0].str)); yyval.str = yyvsp[0].str; ; break;} case 28: #line 438 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBGL2 (("num=%d\n",yyvsp[0].num)); yyval.num = yyvsp[0].num; ; break;} case 29: #line 446 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" { DBGL2 (("val=x%x\n",yyvsp[0].num)); yyval.val = yyvsp[0].num; ; break;} } /* the action file gets copied in in place of this dollarsign */ #line 498 "/usr/cygnus/progressive-97r2/share/bison.simple" yyvsp -= yylen; yyssp -= yylen; #ifdef YYLSP_NEEDED yylsp -= yylen; #endif #if YYDEBUG != 0 if (yydebug) { short *ssp1 = yyss - 1; fprintf (stderr, "state stack now"); while (ssp1 != yyssp) fprintf (stderr, " %d", *++ssp1); fprintf (stderr, "\n"); } #endif *++yyvsp = yyval; #ifdef YYLSP_NEEDED yylsp++; if (yylen == 0) { yylsp->first_line = yylloc.first_line; yylsp->first_column = yylloc.first_column; yylsp->last_line = (yylsp-1)->last_line; yylsp->last_column = (yylsp-1)->last_column; yylsp->text = 0; } else { yylsp->last_line = (yylsp+yylen-1)->last_line; yylsp->last_column = (yylsp+yylen-1)->last_column; } #endif /* Now "shift" the result of the reduction. Determine what state that goes to, based on the state we popped back to and the rule number reduced by. */ yyn = yyr1[yyn]; yystate = yypgoto[yyn - YYNTBASE] + *yyssp; if (yystate >= 0 && yystate <= YYLAST && yycheck[yystate] == *yyssp) yystate = yytable[yystate]; else yystate = yydefgoto[yyn - YYNTBASE]; goto yynewstate; yyerrlab: /* here on detecting error */ if (! yyerrstatus) /* If not already recovering from an error, report this error. */ { ++yynerrs; #ifdef YYERROR_VERBOSE yyn = yypact[yystate]; if (yyn > YYFLAG && yyn < YYLAST) { int size = 0; char *msg; int x, count; count = 0; /* Start X at -yyn if nec to avoid negative indexes in yycheck. */ for (x = (yyn < 0 ? -yyn : 0); x < (sizeof(yytname) / sizeof(char *)); x++) if (yycheck[x + yyn] == x) size += strlen(yytname[x]) + 15, count++; msg = (char *) malloc(size + 15); if (msg != 0) { strcpy(msg, "parse error"); if (count < 5) { count = 0; for (x = (yyn < 0 ? -yyn : 0); x < (sizeof(yytname) / sizeof(char *)); x++) if (yycheck[x + yyn] == x) { strcat(msg, count == 0 ? ", expecting `" : " or `"); strcat(msg, yytname[x]); strcat(msg, "'"); count++; } } yyerror(msg); free(msg); } else yyerror ("parse error; also virtual memory exceeded"); } else #endif /* YYERROR_VERBOSE */ yyerror("parse error"); } goto yyerrlab1; yyerrlab1: /* here on error raised explicitly by an action */ if (yyerrstatus == 3) { /* if just tried and failed to reuse lookahead token after an error, discard it. */ /* return failure if at end of input */ if (yychar == YYEOF) YYABORT; #if YYDEBUG != 0 if (yydebug) fprintf(stderr, "Discarding token %d (%s).\n", yychar, yytname[yychar1]); #endif yychar = YYEMPTY; } /* Else will try to reuse lookahead token after shifting the error token. */ yyerrstatus = 3; /* Each real token shifted decrements this */ goto yyerrhandle; yyerrdefault: /* current state does not do anything special for the error token. */ #if 0 /* This is wrong; only states that explicitly want error tokens should shift them. */ yyn = yydefact[yystate]; /* If its default is to accept any token, ok. Otherwise pop it.*/ if (yyn) goto yydefault; #endif yyerrpop: /* pop the current state because it cannot handle the error token */ if (yyssp == yyss) YYABORT; yyvsp--; yystate = *--yyssp; #ifdef YYLSP_NEEDED yylsp--; #endif #if YYDEBUG != 0 if (yydebug) { short *ssp1 = yyss - 1; fprintf (stderr, "Error: state stack now"); while (ssp1 != yyssp) fprintf (stderr, " %d", *++ssp1); fprintf (stderr, "\n"); } #endif yyerrhandle: yyn = yypact[yystate]; if (yyn == YYFLAG) goto yyerrdefault; yyn += YYTERROR; if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != YYTERROR) goto yyerrdefault; yyn = yytable[yyn]; if (yyn < 0) { if (yyn == YYFLAG) goto yyerrpop; yyn = -yyn; goto yyreduce; } else if (yyn == 0) goto yyerrpop; if (yyn == YYFINAL) YYACCEPT; #if YYDEBUG != 0 if (yydebug) fprintf(stderr, "Shifting error token, "); #endif *++yyvsp = yylval; #ifdef YYLSP_NEEDED *++yylsp = yylloc; #endif yystate = yyn; goto yynewstate; } #line 451 "/5g/ian/binutils/release/copy/gas/./itbl-parse.y" static int yyerror (msg) const char *msg; { printf ("line %d: %s\n", insntbl_line, msg); return 0; }