Short: EB920/Lan Rover SanaII Network Drivers Author: ASDG, Inc. Uploader: henrik@hipdrome.org Version: 1.23 (7.1.93) Type: hard/drivr It seems many owners of the EB920/Lan Rover Ethernet Card has experienced problems of getting the card working with tcp/ip. Due to ASDG not supporting this card anymore, I present the drivers and my solution to the problem. The real problem with this card is that it lacks an Hardware Ethernet Address. This must somehow be set. (I have just tested with amitcp 4.3, this might work with earlier versions too): - The jumper J2 must be set to 'int6' on the card. - Use the 'i6' version of eb920.device (included in the archive) - Edit the eb920 entry in amitcp:db/interfaces (replace the xx's with random hex numbers in the range 00-FF): eb920 DEV=DEVS:Networks/eb920.device UNIT=0 ADDRESS=04:94:04:xx:xx:xx - You also might be able to set the hardware address with the utility s2util (included in the archive): s2util CONFIG SA 04.94.04.xx.xx.xx - Configure Amitcp for direct ethernet (with eb920) the usual way with the 'config amitcp' utility. OK, I hope this works for you. I've tried HARD to get the eb920 to work, usually my machine just hung. But not anymore! ============================= Archive contents ============================= Original Packed Ratio Date Time Name -------- ------- ----- --------- -------- ------------- 61640 61640 0.0% 24-Sep-96 15:32:08 +Installer 13296 7896 40.6% 24-Sep-96 15:32:08 +More 15648 8536 45.4% 24-Sep-96 15:32:04 +s2util 7004 4243 39.4% 24-Sep-96 15:32:08 +eb920.device 7004 4244 39.4% 24-Sep-96 15:32:10 +eb920.device 442 155 64.9% 24-Sep-96 15:32:10 +Disk.info 6728 2245 66.6% 24-Sep-96 15:32:10 +Install-EB920 1289 491 61.9% 24-Sep-96 15:32:10 +Install-EB920.info 3043 1232 59.5% 24-Sep-96 15:32:10 +ReadMe 408 301 26.2% 24-Sep-96 15:32:10 +ReadMe.info -------- ------- ----- --------- -------- 116502 90983 21.9% 29-Oct-96 18:54:22 10 files