;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                                                                            ;
;       oemsetup.720 1.3 fetched 90/07/24
;       @(#) last changed 90/07/24 15:08:46
;	@(#) /sccs/Dgis2.0/Windows3.0/Display/s.oemsetup.720
;                                                                            ;
;	Windows 3.0 DGIS Driver Version 1.01				     ;
;                                                                            ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Here are the names of the disks Setup can prompt for.
; There must be a disk name for each disk number used
;
; The disk number '0' is reserved to represent the windows setup directory
; the directory may be relative to the directory SETUP was run from.
;
; the format is:
;
; n = path,disk name,disk tag file
;
; n           disk "number"  1-9,A-Z (single char only!)
; path        path of disk n
; name        name of disk n
; disk tag    a file on disk n (used to determine if disk is in drive)
;
[disks]
    1 =a:\ ,"Microsoft Windows 3.0 Disk #1",disk1
    2 =a:\ ,"Microsoft Windows 3.0 Disk #2",disk2
    3 =a:\ ,"Microsoft Windows 3.0 Disk #3",disk3
    4 =a:\ ,"Microsoft Windows 3.0 Disk #4",disk4
    5 =a:\ ,"Microsoft Windows 3.0 Disk #5",disk5
    6 =a:\ ,"Microsoft Windows 3.0 Disk #6",disk6
    7 =a:\ ,"Microsoft Windows 3.0 Disk #7",disk7
    a =a:\ ,"GSS DGIS Windows 3.0 Disk #1",gss1

[display]
; The string following the driver description specifies the screen
; resolution. It is used to match the system and OEM character sets
; with the display selection.
;
;profile = driver,         Description of driver,                       resolution,    286 grabber,    logo code,       VDD,            386grabber,   ega.sys    logo data     
;
DGIS3HI  = a:dgis3hi.drv,  "DGIS High Resolution, Secondary EGA/VGA",   "100,120,120", 5:vgacolor.gr2, 2:vgalogo.lgo,   x:*vddvga,      a:dgisvga.gr3,,          2:vgalogo.rle
DGIS3LO  = a:dgis3lo.drv,  "DGIS Medium Resolution, Secondary EGA/VGA", "100,96,96",   5:vgacolor.gr2, 2:vgalogo.lgo,   x:*vddvga,      a:dgisvga.gr3,,          2:vgalogo.rle
DGIS3HIM = a:dgis3hi.drv,  "DGIS High Resolution, Secondary Hercules",  "100,120,120", 5:hercules.gr2, 2:herclogo.lgo,  5:vddherc.386,  5:herc.gr3,,             2:herclogo.rle
DGIS3LOM = a:dgis3lo.drv,  "DGIS Medium Resolution, Secondary Hercules","100,96,96",   5:hercules.gr2, 2:herclogo.lgo,  5:vddherc.386,  5:herc.gr3,,             2:herclogo.rle

; copy these fonts depending on the 386 grabber being used
[DGISVGA.GR3]
5:CGA40WOA.FON,5:CGA40850.FON
5:CGA80WOA.FON,5:CGA80850.FON
5:EGA40WOA.FON,5:EGA40850.FON
5:EGA80WOA.FON,5:EGA80850.FON

[HERC.GR3]
5:HERCWOA.FON,5:HERC850.FON

; If a display adapter other than the one in system selection is selected
; the font is chosen which matches the display resolution exactly.
[sysfonts]
2:vgasys.fon,"VGA (640x480) resolution System Font", "100,96,96"
2:8514sys.fon,"8514/a (1024x768) resolution System Font", "100,120,120"

[fixedfonts]
2:vgafix.fon,"VGA (640x480) resolution Fixed System Font", "100,96,96"
2:8514fix.fon,"8514/a (1024x768) resolution Fixed System Font",  "100,120,120"

[oemfonts]
2:vgaoem.fon,"VGA (640x480) resolution Terminal Font (USA/Europe)", "100,96,96",1
2:8514oem.fon,"8514 (1024x768) resolution Terminal Font (USA/Europe)", "100,120,120",1

[wininiupdate]

[blowaway]
this line needed