CPI ÿÿÇ ÿÿÒiÒ; ÿÿH¯H÷ ÿÿgi ÿÿs€ sóÿÿÍÒÿÿáòáÓÿÿðùðéÿÿ÷D÷ÿÿ; ÿÿW ø W Resolution^bResolution^b Resolution is adjustable from 38 to 600 dpi (Dots Per Inches) for a 100 % Scale Factor. Scale Factor^bScale Factor^b The ^bScale factor^b setup allows you to reduce or enlarge the size of the scanned image. The valid range of scale factors depends on the resolution value. Brightness^bBrightness^b Set this control to ^bLight^b to obtain a light image (NOT to scan a light original). Scan Mode^bScan Mode^b ^bLine Art^b mode is used to scan image with purely black or white areas (i.e. text documents, line drawings). ^bHalftone^b mode is used to scan photographs. Gray levels are translated into patterns of alternating black and white dots. ^bGray Scale^b mode is used to scan photographs by preserving the gray levels. The ^iHP Scanjet^i scans images in 16 gray levels. Halftone Patterns^bHalftone Patterns^b When scanning in halftone mode, each gray shade of a document is represented by a pattern of black and white dots. You can select different halftone pattern to get various effects. Scanning Frame^bScanning Frame^b The scanning frame is the part of the document which is to be scanned. It appears on the reduced page as a white rectangle or one containing a part of the image. The grayed part will not be scanned. To change the scanning frame: o click on ^bSet Frame^b; o move the cursor to one corner of the desired frame in the  reduced view page; o press an hold down the left mouse button and move the  cursor to the opposite corner; o release the left mouse button. Automatic Background Control^bAutomatic Background Control^b The ^bAuto Background Control^b option may only be used in ^bLine Art^b mode. When this option is active, the brightness adjustments are no longer effective and the scanner automatically determines the brightness. Inverse Image^bInverse Image^b This option is used to obtain a negative image. Loading and saving settings^bLoading and saving settings^b When you start Image-In, default scanner settings are loaded from disk. You can save the current scanner settings as the new default settings by selecting ^bSave default^b in the ^bFile^b menu. If you want to reload the default scanner settings, select ^bLoad default^b in the ^bFile^b menu. You can save your scanner settings to different files and recall them later. Select ^bSave as^b in ^bFile^b menu and enter the desired name in the ^bSave settings^b dialog box.