* Library of linear IC definitions

* This is a reduced version of MicroSim's linear subcircuit library.
*   You are welcome to make as many copies of it as you find convenient.
*
* Release date: November 1988
*
* The parameters in the opamp library were derived from the data sheets for
* each part.  The macromodel used is similar to the one described in:
*
*	Macromodeling of Integrated Circuit Operational Amplifiers
*	  by Graeme Boyle, Barry Cohn, Donald Pederson, and James Solomon
*	IEEE Journal of SoliE-State Circuits, Vol. SC-9, no. 6,	Dec. 1974
*
* Differences from the reference (above) occur in the output limiting stage
* which was modified to reduce internally generated currents associated with
* output voltage limiting, as well as short-circuit current limiting.
*
* The opamps are modelled at room temperature and do not track changes with
* temperature.  This library file contains models for nominal, not worst case,
* devices.
*
*-----------------------------------------------------------------------------
* connections:   non-inverting input
*                | inverting input
*                | | positive power supply
*                | | | negative power supply
*                | | | | output
*                | | | | |
.subckt LM324    1 2 3 4 5
*
  c1   11 12 2.887E-12
  c2    6  7 30.00E-12
  dc    5 53 dx
  de   54  5 dx
  dlp  90 91 dx
  dln  92 90 dx
  dp    4  3 dx
  egnd 99  0 poly(2) (3,0) (4,0) 0 .5 .5
  fb    7 99 poly(5) vb vc ve vlp vln 0 21.22E6 -20E6 20E6 20E6 -20E6
  ga    6  0 11 12 188.5E-6
  gcm   0  6 10 99 59.61E-9
  iee   3 10 dc 15.09E-6
  hlim 90  0 vlim 1K
  q1   11  2 13 qx
  q2   12  1 14 qx
  r2    6  9 100.0E3
  rc1   4 11 5.305E3
  rc2   4 12 5.305E3
  re1  13 10 1.845E3
  re2  14 10 1.845E3
  ree  10 99 13.25E6
  ro1   8  5 50
  ro2   7 99 25
  rp    3  4 9.082E3
  vb    9  0 dc 0
  vc    3 53 dc 1.500
  ve   54  4 dc 0
  vlim  7  8 dc 0
  vlp  91  0 dc 40
  vln   0 92 dc 40
.model dx D(Is=800.0E-18 Rs=1)
.model qx PNP(Is=800.0E-18 Bf=166.7)
.ends
*-----------------------------------------------------------------------------
* connections:   non-inverting input
*                | inverting input
*                | | positive power supply
*                | | | negative power supply
*                | | | | output
*                | | | | |
.subckt uA741    1 2 3 4 5
*
  c1   11 12 8.661E-12
  c2    6  7 30.00E-12
  dc    5 53 dx
  de   54  5 dx
  dlp  90 91 dx
  dln  92 90 dx
  dp    4  3 dx
  egnd 99  0 poly(2) (3,0) (4,0) 0 .5 .5
  fb    7 99 poly(5) vb vc ve vlp vln 0 10.61E6 -10E6 10E6 10E6 -10E6
  ga    6  0 11 12 188.5E-6
  gcm   0  6 10 99 5.961E-9
  iee  10  4 dc 15.16E-6
  hlim 90  0 vlim 1K
  q1   11  2 13 qx
  q2   12  1 14 qx
  r2    6  9 100.0E3
  rc1   3 11 5.305E3
  rc2   3 12 5.305E3
  re1  13 10 1.836E3
  re2  14 10 1.836E3
  ree  10 99 13.19E6
  ro1   8  5 50
  ro2   7 99 100
  rp    3  4 18.16E3
  vb    9  0 dc 0
  vc    3 53 dc 1
  ve   54  4 dc 1
  vlim  7  8 dc 0
  vlp  91  0 dc 40
  vln   0 92 dc 40
.model dx D(Is=800.0E-18 Rs=1)
.model qx NPN(Is=800.0E-18 Bf=93.75)
.ends
*-----------------------------------------------------------------------------

*** Voltage comparators

* The parameters in this comparator library were derived from data sheets for
* each parts.  The macromodel used was developed by MicroSim Corporation, and
* is produced by the "Parts" option to PSpice.
*
* Although we do not use it, another comparator macro model is described in:
*
*	An Integrated-Circuit Comparator Macromodel
*	  by Ian Getreu, Andreas Hadiwidjaja, and Johan Brinch
*	IEEE Journal of Solid-State Circuits, Vol. SC-11, no. 6, Dec. 1976
*
* This reference covers the considerations that go into duplicating the
* behavior of voltage comparators.
*
* The comparators are modelled at room temperature.  The macro model does not
* track changes with temperature.  This library file contains models for
* nominal, not worst case, devices.
*
*-----------------------------------------------------------------------------
* connections:   non-inverting input
*                | inverting input
*                | | positive power supply
*                | | | negative power supply
*                | | | | open collector output
*                | | | | | output ground
*                | | | | | |
.subckt LM111    1 2 3 4 5 6
*
  f1    9  3 v1 1
  iee   3  7 dc 100.0E-6
  vi1  21  1 dc .45
  vi2  22  2 dc .45
  q1    9 21  7 qin
  q2    8 22  7 qin
  q3    9  8  4 qmo
  q4    8  8  4 qmi
.model qin PNP(Is=800.0E-18 Bf=833.3)
.model qmi NPN(Is=800.0E-18 Bf=1002)
.model qmo NPN(Is=800.0E-18 Bf=1000 Cjc=1E-15 Tr=118.8E-9)
  e1   10  6  9  4  1
  v1   10 11 dc 0
  q5    5 11  6 qoc
.model qoc NPN(Is=800.0E-18 Bf=34.49E3 Cjc=1E-15 Tf=364.6E-12 Tr=79.34E-9)
  dp    4  3 dx
  rp    3  4 6.122E3
.model dx  D(Is=800.0E-18 Rs=1)
*
.ends
*
* End of library file