XprZmodem.Library
Version 2.51, 30 January 1992


What's different?
   This  Version of the library uses 8K blocks max during transfer instead
   of  just 1K. That's all. This was done for those High-Speed  Users,  so
   that they could gain some more cps, on the condition that both ends are
   using this library, or one a aquivalent ZModem-Protocol with 8K  blocks
   max. In any other case "Packet too long" Errors will occur and decrease
   the transferrate below that one typical with 1K blocks.

Has been tested?
   The  normal  version of this library has been shortly tested with  TERM
   1.9b  and NComm 1.921 under OS 2.0. Since I removed  _USEOLDEXEC_  from
   the  source and don't have OS 1.3 available right now, I can't tell  if
   it'll  work under OS 1.3. The same is valid for the 020 version,  since
   I have not the appropriate hardware (sponsors welcome :).

Addional information?
   Because this Version of the library differs only slightly from 2.50,
   refer to that package in terms of source and docs.

Any Credits?
   Version 2.10, 12 February 1991, by Rick Huebner

   Version 2.50 Update, 15 November 1991, by William M. Perkins

   Idea: Stefan Becker

   Testing: Jörg Gutzke

My Home?
   Alexander Lazarevic'      Fido : 2:242/7.5 (MOWGLI)
                           Usenet : laza@cip-s01.informatik.rwth-aachen.de
                                    Alexander_Lazarevic@mowgli.fido.de