TABLE OF CONTENTS expansion.library/AddBootNode expansion.library/AddConfigDev expansion.library/AddDosNode expansion.library/AllocConfigDev expansion.library/AllocExpansionMem expansion.library/FindConfigDev expansion.library/FreeConfigDev expansion.library/FreeExpansionMem expansion.library/GetCurrentBinding expansion.library/MakeDosNode expansion.library/ObtainConfigBinding expansion.library/ReleaseConfigBinding expansion.library/RemConfigDev expansion.library/SetCurrentBinding expansion.library/AddBootNode expansion.library/AddBootNode NAME AddBootNode -- Add a BOOTNODE to the system (V36) SYNOPSIS ok = AddBootNode( bootPri, flags, deviceNode, configDev ) D0 D0 D1 A0 A1 BOOL AddBootNode( BYTE,ULONG,struct DeviceNode *,struct ConfigDev * ); FUNCTION This function will do one of two things: 1> If dos is running, add a new disk type device immediatly. 2> If dos is not yet running, save information for later use by the system. This function works exactly like the AddDosNode() function, but allows an additional specification. Autoboot from an expansion card before DOS is running requires the card's ConfigDev structure. Pass a NULL ConfigDev pointer to create a non-bootable node. NOTE This function eliminates the need to manually Enqueue a BOOTNODE onto an expansion.library list. Be sure V36 expansion.library is available before calling this function! SEE ALSO AddDosNode expansion.library/AddConfigDev expansion.library/AddConfigDev NAME AddConfigDev - add a new ConfigDev structure to the system SYNOPSIS AddConfigDev( configDev ) A0 FUNCTION (Not typically called by user code) This routine adds the specified ConfigDev structure to the list of Configuration Devices in the system. INPUTS configDev - a valid ConfigDev structure. RESULTS EXCEPTIONS SEE ALSO RemConfigDev BUGS expansion.library/AddDosNode expansion.library/AddDosNode NAME AddDosNode -- mount a disk to the system SYNOPSIS ok = AddDosNode( bootPri, flags, deviceNode ) D0 D0 D1 A0 BOOL AddDosNode( BYTE,ULONG,struct DeviceNode *); FUNCTION This routine makes sure that your disk device (or a device that wants to be treated as if it was a disk...) will be entered into the system. If the dos is already up and running, then it will be entered immediately. If the dos has not yet been run then the data will be recorded, and the dos will get it later. We try and boot off of each device in turn, based on priority. Floppies have a hard-coded priority. There is only one additional piece of magic done by AddDosNode. If there is no executable code specified in the deviceNode structure (e.g. dn_SegList, dn_Handler, and dn_Task are all null) then the standard dos file handler is used for your device. Documentation note: a "task" as used here is a dos-task, not an exec-task. A dos-task, in the strictest sense, is the address of an exec-style message port. In general, it is a pointer to a process's pr_MsgPort field (e.g. a constant number of bytes after an exec port). INPUTS bootPri -- a BYTE quantity with the boot priority for this disk. This priority is only for which disks should be looked at: the actual disk booted from will be the first disk with a valid boot block. If no disk is found then the "bootme" hand will come up and the bootstrap code will wait for a floppy to be inserted. Recommend priority assignments are: +5 -- unit zero for the floppy disk. The floppy should always be highest priority to allow the user to abort out of a hard disk boot. 0 -- the run of the mill hard disk -5 -- a "network" disk (local disks should take priority). -128 -- don't even bother to boot from this device. flags -- additional flag bits for the call: ADNF_STARTPROC (bit 0) -- start a handler process immediately. Normally the process is started only when the device node is first referenced. This bit is meaningless if you have already specified a handler process (non-null dn_Task). deviceNode -- a legal DOS device node, properly initialized. Typically this will be the result of a MakeDosNode(). Special cases may require a custom-built device node. RESULTS ok - non-zero everything went ok, zero if we ran out of memory or some other weirdness happened. EXAMPLE /* enter a bootable disk into the system. Start a file handler ** process immediately. */ if( AddDosNode( 0, ADNF_STARTPROC, MakeDosNode( paramPacket ) ) ) ...AddDosNode ok... BUGS Before V36 Kickstart, no function existed to add BOOTNODES. If an older expansion.library is in use, driver code will need to manually construct a BootNode and Enqueue() it to eb_Mountlist. SEE ALSO MakeDosNode, AddBootNode expansion.library/AllocConfigDev expansion.library/AllocConfigDev NAME AllocConfigDev - allocate a ConfigDev structure SYNOPSIS configDev = AllocConfigDev() D0 FUNCTION This routine returns the address of a ConfigDev structure. It is provided so new fields can be added to the structure without breaking old, existing code. The structure is cleared when it is returned to the user. INPUTS RESULTS configDev - either a valid ConfigDev structure or NULL. EXCEPTIONS SEE ALSO FreeConfigDev BUGS expansion.library/AllocExpansionMem NAME AllocExpansionMem - allocate expansion memory SYNOPSIS startSlot = AllocExpansionMem( numSlots, slotOffset ) D0 D0 D1 FUNCTION (Not typically called by user code) This function allocates numslots of expansion space (each slot is E_SLOTSIZE bytes). It returns the slot number of the start of the expansion memory. The EC_MEMADDR macro may be used to convert this to a memory address. Boards that fit the expansion architecture have alignment rules. Normally a board must be on a binary boundary of its size. Four and Eight megabyte boards have special rules. User defined boards might have other special rules. If AllocExpansionMem() succeeds, the startSlot will satisfy the following equation: (startSlot - slotOffset) MOD slotAlign = 0 INPUTS numSlots - the number of slots required. slotOffset - an offset from that boundary for startSlot. RESULTS startSlot - the slot number that was allocated, or -1 for error. EXAMPLES AllocExpansionMem( 2, 0 ) Tries to allocate 2 slots on a two slot boundary. AllocExpansionMem( 64, 32 ) This is the allocation rule for 4 meg boards. It allocates 4 megabytes (64 slots) on an odd 2 meg boundary. EXCEPTIONS SEE ALSO FreeExpansionMem BUGS expansion.library/FindConfigDev expansion.library/FindConfigDev NAME FindConfigDev - find a matching ConfigDev entry SYNOPSIS configDev = FindConfigDev( oldConfigDev, manufacturer, product ) D0 A0 D0 D1 FUNCTION This routine searches the list of existing ConfigDev structures in the system and looks for one that has the specified manufacturer and product codes. If the oldConfigDev is NULL the the search is from the start of the list of configuration devices. If it is not null then it searches from the first configuration device entry AFTER oldConfigDev. A code of -1 is treated as a wildcard -- e.g. it matches any manufacturer (or product) INPUTS oldConfigDev - a valid ConfigDev structure, or NULL to start from the start of the list. manufacturer - the manufacturer code being searched for, or -1 to ignore manufacturer numbers. product - the product code being searched for, or -1 to ignore product numbers. RESULTS configDev - the next ConfigDev entry that matches the manufacturer and product codes, or NULL if there are no more matches. EXCEPTIONS EXAMPLES /* to find all configdevs of the proper type */ struct ConfigDev *cd = NULL; while( cd = FindConfigDev( cd, MANUFACTURER, PRODUCT ) ) { /* do something with the returned ConfigDev */ } SEE ALSO BUGS expansion.library/FreeConfigDev expansion.library/FreeConfigDev NAME FreeConfigDev - free a ConfigDev structure SYNOPSIS FreeConfigDev( configDev ) A0 FUNCTION This routine frees a ConfigDev structure as returned by AllocConfigDev. INPUTS configDev - a valid ConfigDev structure. RESULTS EXCEPTIONS SEE ALSO AllocConfigDev BUGS expansion.library/FreeExpansionMem expansion.library/FreeExpansionMem NAME FreeExpansionMem - allocate standard device expansion memory SYNOPSIS FreeExpansionMem( startSlot, numSlots ) D0 D1 FUNCTION (Not typically called by user code) This function allocates numslots of expansion space (each slot is E_SLOTSIZE bytes). It is the inverse function of AllocExpansionMem(). INPUTS startSlot - the slot number that was allocated, or -1 for error. numSlots - the number of slots to be freed. RESULTS EXAMPLES EXCEPTIONS If the caller tries to free a slot that is already in the free list, FreeExpansionMem will Alert() (e.g. crash the system). SEE ALSO AllocExpansionMem BUGS expansion.library/GetCurrentBinding NAME GetCurrentBinding - sets static board configuration area SYNOPSIS actual = GetCurrentBinding( currentBinding, size ) A0 D0:16 FUNCTION This function writes the contents of the "currentBinding" structure out of a private place. It may be set via SetCurrentBinding(). This is really a kludge, but it is the only way to pass extra arguments to a newly configured device. A CurrentBinding structure has the name of the currently loaded file, the product string that was associated with this driver, and a pointer to the head of a singly linked list of ConfigDev structures (linked through the cd_NextCD field). Many devices may not need this information; they have hard coded into themselves their manufacture number. It is recommended that you at least check that you can deal with the product code in the linked ConfigDev structures. INPUTS currentBinding - a pointer to a CurrentBinding structure size - the size of the user's binddriver structure. No more than this much data will be copied. If size is larger than the libraries idea a CurrentBinding size, then the structure will be null padded. RESULTS actual - the true size of a CurrentBinding structure is returned. EXAMPLES EXCEPTIONS SEE ALSO GetCurrentBinding BUGS expansion.library/MakeDosNode expansion.library/MakeDosNode NAME MakeDosNode -- construct dos data structures that a disk needs SYNOPSIS deviceNode = MakeDosNode( parameterPkt ) D0 A0 struct DeviceNode * MakeDosNode( void * ); FUNCTION This routine manufactures the data structures needed to enter a dos disk device into the system. This consists of a DeviceNode, a FileSysStartupMsg, a disk environment vector, and up to two bcpl strings. See the libraries/dosextens.h and libraries/filehandler.h include files for more information. MakeDosNode will allocate all the memory it needs, and then link the various structure together. It will make sure all the structures are long-word aligned (as required by the DOS). It then returns the information to the user so he can change anything else that needs changing. Typically he will then call AddDosNode() to enter the new device into the dos tables. INPUTS parameterPkt - a longword array containing all the information needed to initialize the data structures. Normally I would have provided a structure for this, but the variable length of the packet caused problems. The two strings are null terminated strings, like all other exec strings. longword description -------- ----------- 0 string with dos handler name 1 string with exec device name 2 unit number (for OpenDevice) 3 flags (for OpenDevice) 4 # of longwords in rest of enviroment 5-n file handler environment (see libraries/filehandler.h) RESULTS deviceNode - pointer to initialize device node structure, or null if there was not enough memory. You may need to change certain fields before passing the DeviceNode to AddDosNode(). EXAMPLES /* set up a 3.5" amiga format floppy drive for unit 1 */ char execName[] = "trackdisk.device"; char dosName[] = "df1"; ULONG parmPkt[] = { (ULONG) dosName, (ULONG) execName, 1, /* unit number */ 0, /* OpenDevice flags */ /* here is the environment block */ 16, /* table upper bound */ 512>>2, /* # longwords in a block */ 0, /* sector origin -- unused */ 2, /* number of surfaces */ 1, /* secs per logical block -- leave as 1 */ 11, /* blocks per track */ 2, /* reserved blocks -- 2 boot blocks */ 0, /* ?? -- unused */ 0, /* interleave */ 0, /* lower cylinder */ 79, /* upper cylinder */ 5, /* number of buffers */ MEMF_CHIP, /* type of memory for buffers */ (~0 >> 1), /* largest transfer size (largest signed #) */ ~1, /* addmask */ 0, /* boot priority */ 0x444f5300, /* dostype: 'DOS\0' */ }; struct Device Node *node, *MakeDosNode(); node = MakeDosNode( parmPkt ); SEE ALSO AddDosNode, libraries/dosextens.h, libraries/filehandler.h expansion.library/ObtainConfigBinding NAME ObtainConfigBinding - try to get permission to bind drivers SYNOPSIS ObtainConfigBinding() FUNCTION ObtainConfigBinding gives permission to bind drivers to ConfigDev structures. It exists so two drivers at once do not try and own the same ConfigDev structure. This call will block until it is safe proceed. Individual drivers to not need to call this routine. It is intended for BindDriver program, and others like it. If your drivers won't be loaded via the standard method, you may need to lock out others. It is crucially important that people lock out others before loading new drivers. Much of the data that is used to configure things is statically kept, and others need to be kept from using it. This call is build directly on Exec SignalSemaphore code (e.g. ObtainSemaphore). INPUTS RESULTS EXCEPTIONS SEE ALSO ReleaseConfigBinding BUGS expansion.library/ReleaseConfigBinding NAME ReleaseConfigBinding - allow others to bind to drivers SYNOPSIS ReleaseConfigBinding() FUNCTION This call should be used when you are done binding drivers to ConfigDev entries. It releases the SignalSemaphore; this allows others to bind their drivers to ConfigDev structures. INPUTS RESULTS EXAMPLES EXCEPTIONS SEE ALSO ObtainConfigBinding BUGS expansion.library/RemConfigDev expansion.library/RemConfigDev NAME RemConfigDev - remove a ConfigDev structure from the system SYNOPSIS RemConfigDev( configDev ) A0 FUNCTION (Not typically called by user code) This routine removes the specified ConfigDev structure from the list of Configuration Devices in the system. INPUTS configDev - a valid ConfigDev structure. RESULTS EXCEPTIONS SEE ALSO AddConfigDev BUGS expansion.library/SetCurrentBinding NAME SetCurrentBinding - sets static board configuration area SYNOPSIS SetCurrentBinding( currentBinding, size ) A0 D0:16 FUNCTION This function records the contents of the "currentBinding" structure in a private place. It may be read via GetCurrentBinding(). This is really a kludge, but it is the only way to pass extra arguments to a newly configured device. A CurrentBinding structure has the name of the currently loaded file, the product string that was associated with this driver, and a pointer to the head of a singly linked list of ConfigDev structures (linked through the cd_NextCD field). Many devices may not need this information; they have hard coded into themselves their manufacture number. It is recommended that you at least check that you can deal with the product code in the linked ConfigDev structures. INPUTS currentBinding - a pointer to a CurrentBinding structure size - the size of the user's binddriver structure. No more than this much data will be copied. If size is larger than the libraries idea a CurrentBinding size, then the structure will be null padded. RESULTS EXAMPLES EXCEPTIONS SEE ALSO GetCurrentBinding BUGS