THIS IS A STRIPPED DOWN  VERSION OF THE  ORIGINAL REMOTE.DOC.
        BECAUSE THERE  ARE NOT ALL  ORIGINAL FILES  INCLUDED IN  THIS
        ARCHIVE, THERE IS NO NEED TO BOTHER YOU WITH THESE THINGS.

        VMC HAS THE PERMISSION TO  INCLUDE THIS STRIPPED DOWN VERSION
        INTO THE HYPERCOM DISTRIBUTION ARCHIVE.

        PLEASE DONT ASK STEVE IF YOU  HAVE ANY PROBLEMS WITH THE AUX-
        HANDLER. HIS  ADDRESS IS ADDED ONLY FOR  COMPLETION,  NOT FOR
        SUGGESTIONS.


        Carsten




        REMOTE AUX: Support         Steve Drew
        -------------------

        Here are  some  utilities  I  wrote  to enchance and support,
        remote AUX: logins.


  I     Files included
        ~~~~~~~~~~~~~~

        sd_aux_handler
        mountlist.aux

		Version 1.5
			- minor bug fixes.
			- Multi line support (define multiple AUX's)

		Version 1.2
                        - Supports AZ Zmodem program (see below)
                        - ^R key (retype current line)
                        - Better  typeahead  handling.    Typing    a
                          command while the display is  active,  does
                          not stop the current output, instead  it is
                          buffered  and  printed  after  the next CLI
                          prompt.    (Like VMS).  To stop the current
                          output just  use  standard XON, XOFF.  This
                          is much better  when over the modem as with
                          the 1.3 aux:   handler any line noise would
                          stop the current output until  ^X  or  <CR>
                          was entered.
                       -  When  the  typeahead  buffer  is full  AUX:
                          sends a BELL back to the user.
                       -  Support to  'kill  off' a AUX:  CLI process
                          via  the  'ECHO >AUX:ENDCLI'  command  from
                          another CLI window.
                       -  Prevents multiple 'NEWCLI AUX:' commands.
                       -  Suspends input/output on loss of carrier.

                The  mountlist  file  needs  to be inserted into your
                DEVS:mountlist  file.     Make  sure  to  remove  the
                definition of the commodore  AUX:   handler from your
                mountlist if you are planning to use mine.


   II   Installation instructions
        ~~~~~~~~~~~~~~~~~~~~~~~~~

        1. Unpack all files into a directory:

        2. Add to your startup-sequence (user-startup)

           Assign Rem: dev:directory

           Execute Rem:Remote-Startup


  III  Notes
       ~~~~~

      - REMOTELY Stopping an AUX: Process

        Once a CLI is  running  on  the  AUX:  port, you can remotely
        cause the CLI to 'ENDCLI' by issuing the following command:
        ECHO >AUX:ENDCLI , from another CLI window.

        The  sd-aux-handler  detects  a  file    open    request  for
        'AUX:ENDCLI' and imediatley causes an ENDCLI  command  to  be
        sent to the current reader of the  AUX:  device.  Note:  This
        does not work with the 1.3 AUX:   handler,  and will not work
        if  the  CLI  running  on the AUX:  is  currently  running  a
        program, ie not at the cli or shell prompt.


    --------------------------------------------------------------------

        Author:

        Steve Drew
        216 MacEwan Valley Mews N.W.
        Calgary, Alberta
        Canada.
        T3K 3T3

        403-295-3601 (Home)
        403-295-4357 (Work)

        drew@cgou11.enet.dec.com

    ----------------------------------------------------------------------