/* bitdefs for mail "flags" */ #define MAIL_REALNAME 0x00000001 #define MAIL_COPYSELF 0x00000002 #define MAIL_LOWPRI 0x00000004 #define MAIL_HIGHPRI 0x00000008 #define MAIL_HOLD 0x00000010 #define MAIL_CRASH 0x00000020 #define MAIL_FSEND 0x00000040 #define MAIL_FREQ 0x00000080 #define MAIL_OPENED 0x00000100 #define MAIL_REPLIED 0x00000200 #define MAIL_RECEIPT 0x00000400 #define MAIL_SIGNATURE 0x00000800 #define MAIL_QUOTE 0x00001000 #define CNETOUTBOX "mail:CNETOUTBOX" #define CNETINBOX "mail:CNETINBOX" // Error codes produced when mail-task cannot deliver mail - added 16-Aug-96 // these codes decide what text is returned to the user who SENT the mail // explaining the reason that mail was "bounced" #define MAILERROR_NOUSER 0x01 // no user by this name #define MAILERROR_DISKFULL 0x02 // could not save data, disk full #define MAILERROR_LOWBALANCE 0x04 // receiving user has low balance #define MAILERROR_NORECIPIENT 0x08 // internal error. MailToList structure // not included #define MAILERROR_NOMHEAD 0x10 // internal error. No MailHeader4 specified #define MAILERROR_NOTEXT 0x20 // internal error. No text in message #define MAILERROR_NOUUCP 0x40 // internal error. No UUCP name specified for local mail #define MAILERROR_NODIR 0x80 // internal error. Could not create user directory #define MAILERROR_NOINETSCRIPT 0x100 // internal error. Could not create/spawn internet mail script #define MAILERROR_BADFIDOADDR 0x200 // bad/invalid fido address #define MAILERROR_LOWNETBALANCE 0x400 // recipient does not have enough Net Credits to receive mail #define MAILERROR_INVALIDMTYPE 0x800 // invalid MailType in struct MailToList #ifndef CNET_MAIL #define CNET_MAIL // Fidonet - from nl.h struct Addr { UWORD Zone; UWORD Net; UWORD Node; UWORD Point; }; // Fidonet - from nl.h struct NodeDesc { struct Addr Node; /* node address */ ULONG Reserved0; UWORD Region; /* region (0 if none) */ UWORD Hub; /* node # of this node's HUB (0 if none) */ char *System; /* node name */ char *Sysop; /* sysop name */ char *Phone; /* phone number */ char *City; /* city and state */ char *Passwd; /* password */ char *Flags; /* nodelist flags */ LONG Cost; /* cost */ UWORD BaudRate; /* baud rate */ LONG ID; /* unique ID (offset into nodeindex) */ ULONG Reserved1; /* New for version 5 */ ULONG Reserved2; /* For compatibility with nodelist.library */ ULONG Reserved3; UBYTE Type; /* Entry type */ UBYTE Pad0; }; struct OldMailHeader { /* NEW 2.0 for mail, etc */ struct IsDate Date; struct IsDate EDate; /* for EXPIRATION setting */ short EDays; char Subject [81]; /* Ahh, nice and roomy */ char From [27]; ULONG Number; short ByAccount; long ByID; char To [28]; /* originals, if was Sent/forwarded */ long ToID; short ToAccount; UBYTE Receipt; /* return-receipt ?? */ UBYTE Return; /* return original message?? */ UBYTE HasOriginal; UBYTE File; /* for File Mail */ UBYTE Anonymous; /* From an anonymous user? */ char Route [41]; /* for Bulk Mail, list of recips */ short Recipients; /* number of recipients ... */ UBYTE Party; /* Allow party responses? */ long Length; long CheckSum; /* must be 0 */ long Item; /* if this message is repeated */ long Seek; /* somewhere on the system */ short Base; /* this tells where !!! */ char NetAddress[52]; /* may be shortened */ UBYTE Alias; UBYTE Replied; UBYTE Received; UBYTE NoEdits; struct IsDate ShowDate; }; struct MailHeader4 { /* NEW 2.0 for mail, etc */ LONG HeaderSeek; /* dynamic, set by MailRead() and CheckMail() - location of header in _mhead4 */ ULONG Date; /* date mail SENT - time_t value */ ULONG EDate; /* for EXPIRATION setting - expire DATE (time_t value) */ short EDays; /* expire days */ char Subject [81]; /* Ahh, nice and roomy */ char From [27]; /* FROM user - Handle/name */ ULONG Number; /* unique ID number (16 bit HEX time stamp) */ short ByAccount; /* if a local user, account number */ long ByID; /* "" "" IDNumber */ char To [200]; /* originals, if was Sent/forwarded or multi/carbon */ long ToID; /* "" "" IDNumber */ short ToAccount; /* To account number */ UBYTE Receipt; /* return-receipt ?? */ UBYTE Return; /* return original message?? */ UBYTE Anonymous; /* From an anonymous user?? */ UBYTE NoSAMCharge; // v4.13c - do not alter SAM when this item is killed char Expansion[127]; /* future expansion */ short Recipients; /* number of recipients ... */ long Length; /* Length of MESSAGE body */ long CheckSum; /* must be 0 */ long Item; /* if this message is repeated */ long Seek; /* somewhere on the system */ char UniqueBase[75]; /* this tells where - Same as subboard GO keyword !!! */ /* was 21 bytes long up to CNet v4.21 */ /* this is set by Mail-TASK on incoming mail */ char NetAddress[80]; /* Net address of the user this mail is from if a network mail */ UBYTE Alias; /* did user use an alias?? */ UBYTE Replied; /* did user reply?? */ UBYTE Received; /* did user receive/read it yet?? */ UBYTE HasOriginal; /* user kept original message?? */ UBYTE NoEdits; /* mail not editable if TRUE */ ULONG ReadDate; /* Date message READ - same as "Date" unless read */ char FileAttach[128]; /* full path/filename of attached file */ short set; /* which charge schedule to use - Physical number - Use NumToChargeSet() to get a pointer of type (struct ChargeSet *) to the actual ChargeSet */ ULONG flags; /* Mail flags (See bitdefs at the top of mail.h) */ char magic[13]; /* Usually "1234CNET56789" for a VALID/non-corrupt header */ /* Mail recovery programs will search for and */ /* test this to validate a "recovered" header! */ /* CNet MailRead also tests for this to be correct. */ /* Automatic recovery should be active in CNet AMIGA */ /* v4.13 */ /* don't forget to get the TEXT from _mtext4 as well!! */ LONG text; /* Seek() value for text in _text4 */ UBYTE Killed; /* TRUE if mail is marked for deletion - only used for moving mail to trashcan */ struct MailHeader4 *next; /* set internally - pointer to the next mail header in current folder */ }; struct NewMailHeader4 { /* NEW in v4.22 */ LONG HeaderSeek; /* dynamic, set by MailRead() and CheckMail() - location of header in _mhead4 */ ULONG Date; /* date mail SENT - time_t value */ ULONG EDate; /* for EXPIRATION setting - expire DATE (time_t value) */ short EDays; /* expire days */ char Subject [81]; /* Ahh, nice and roomy */ char From [27]; /* FROM user - Handle/name */ ULONG Number; /* unique ID number (16 bit HEX time stamp) */ short ByAccount; /* if a local user, account number */ long ByID; /* "" "" IDNumber */ char To [200]; /* originals, if was Sent/forwarded or multi/carbon */ long ToID; /* "" "" IDNumber */ short ToAccount; /* To account number */ UBYTE Receipt; /* return-receipt ?? */ UBYTE Return; /* return original message?? */ UBYTE Anonymous; /* From an anonymous user?? */ UBYTE NoSAMCharge; // v4.13c - do not alter SAM when this item is killed char Expansion[127]; /* future expansion */ short Recipients; /* number of recipients ... */ long Length; /* Length of MESSAGE body */ long CheckSum; /* must be 0 */ long Item; /* if this message is repeated */ long Seek; /* somewhere on the system */ char UniqueBase[75]; /* this tells where - Same as subboard GO keyword !!! */ /* was 21 bytes long up to CNet v4.21 */ /* this is set by Mail-TASK on incoming mail */ char NetAddress[80]; /* Net address of the user this mail is from if a network mail */ UBYTE Alias; /* did user use an alias?? */ UBYTE Replied; /* did user reply?? */ UBYTE Received; /* did user receive/read it yet?? */ UBYTE HasOriginal; /* user kept original message?? */ UBYTE NoEdits; /* mail not editable if TRUE */ ULONG ReadDate; /* Date message READ - same as "Date" unless read */ char FileAttach[128]; /* full path/filename of attached file */ short set; /* which charge schedule to use - Physical number - Use NumToChargeSet() to get a pointer of type (struct ChargeSet *) to the actual ChargeSet */ ULONG flags; /* Mail flags (See bitdefs at the top of mail.h) */ char magic[13]; /* Usually "1234CNET56789" for a VALID/non-corrupt header */ /* Mail recovery programs will search for and */ /* test this to validate a "recovered" header! */ /* CNet MailRead also tests for this to be correct. */ /* Automatic recovery should be active in CNet AMIGA */ /* v4.13 */ /* don't forget to get the TEXT from _mtext4 as well!! */ LONG text; /* Seek() value for text in _text4 */ UBYTE Killed; /* TRUE if mail is marked for deletion - only used for moving mail to trashcan */ // new for v4.22 char ReplyTo[100]; /* standard replacement reply-to: for internet email */ char expansion[100]; /* future expansion */ struct MailHeader4 *next; /* set internally - pointer to the next mail header in current folder */ }; /* folder structure - use GotoMailFolder(UUCP_ID, FOLDER_NAME) to open a mail folder */ struct NewMailFolder { char OwnerID[10]; /* UUCP ID of owner */ char path[128]; /* path to this folder (usually mail:users/UUCP_ID) */ char Name[40]; /* name of mail folder (ie. INBOX, OUTBOX, etc,.. */ BPTR headerfh; /* file handle used to access this folder's mail HEADER file */ BPTR textfh; /* file handle used to access this folder's mail TEXT */ UBYTE temporary; /* TRUE if folder was opened on the fly and must be freed after current use */ // Note that both file handles will have corresponding FILE-LOCKS attached // to myp->Locks. Attempting to access these files while an outstanding // lock is valid may result in undesirable operation, and possibly // catastrophy (ie.corrupted mail) Please use the CNetWaitLock() function // to cause your task to be put to sleep until the file is // available/unlocked. If you require your task to perform other services // while waiting for the lock just keep checking the Locks list every once // in a while. When the file is available/unlocked, it's name will no // longer appear in the Lock list. Also, note that the FULL PATH name is // what is stored in the lock list. You can get the full path name to the // file, by using Lock() on the path to the file (minus the name of the // file you wish to access) and then call the function NameFromLock() // which exists in the DOS link library (see DOS autodocs) */ struct NewMailFolder *NextFolder; /* next folder allocated */ }; struct MailAlias4 { char Alias[24]; /* 0 - alias to be entered when sending mail */ char Name[24]; /* 24 - user's handle/name on the destination system */ char Address[80]; /* 48 - destination address - blank if destination is local system */ UBYTE MailType; /* 128 - not currently used */ struct MailAlias4 *NextAlias; /* pointer to next mailalias */ }; /* the MailToList structure is filled in and returned by CMailIsUUCP, */ /* CMailIsFido, CMailIsLocal and CMailIsAlias functions */ /* the first item written to outbox/#?.mtl is the name of the MailHeader4 */ /* header/message file terminate by 0x0A - then 1 or more instances of */ /* struct MailToList */ struct MailToList { char Name[100]; /* full network name/address of user */ char UUCP[10]; /* UUCP id if local user */ UBYTE MailType; /* type of mail - mailtask uses this to decide what */ /* user name to use on outgoing mail */ /* and which file-attach method to */ /* use and also how to send the mail */ /* */ /* - 0=LOCAL REALNAME, 1=local HANDLE, */ /* 2=UUCP, 3=FIDO */ /* 4=LOCAL-ALIAS, 5=Handle from */ /* FindAccount */ /* 6=FEEDBACK 7=NEWUSER */ /* 8="SYSOP" */ struct MailToList *next; }; struct CNetNodeDesc // possible argument to IsFido() { char UserName[30]; // User name ULONG Node[4]; // node address UWORD Region; // region (0 if none) UWORD Hub; // node # of this node's HUB (0 if none) char System[60]; // node name char Sysop[60]; // sysop name char Phone[30]; // phone number char City[60]; // city and state char Flags[60]; // nodelist flags LONG Cost; // cost UWORD BaudRate; // baud rate UBYTE Type; // Entry type }; /************************************************************************** * structure used in mail:users/UUCP_ID/twitfilter * mail from user(s) matching the fields within will not be saved * and the mail will be bounced back to the originating user * stating that the recipient is blocking his messages **************************************************************************/ struct MailFilter { char Name[100]; // full name of user to filter - may be UUCP name, real name or handle ULONG Node[4]; // network address to filter BYTE expansion[100]; // future expansion struct MailFilter *NextFilter; // internal use only }; #endif