CHANGES for the SANE Mustek backend 2000-06-04 * changed (again) Paragon 12000 SP linedistance handling, now 1.02 uses normal LD corrections, all other use none. We'll see, if this works. * fixed some long lines (>80 chars) 2000-06-03 * released backend version 1.0-84 2000-06-03 * changed line-distance handling, removed ld.max_value magic (didn't work) * fixed (maybe) Paragon 12000 SP color stripes problems (v 1.11 and others) * simpler linedistance debug output, only for 1-pass Paragon scanners 2000-06-02 * removed code in dev_read_start which was never called (suggestion from Jan-Erik Karlsson) 2000-05-21 * added double buffering (trying to copy the scsi buffer to the frontend while getting a new one). This probably won't work on all platforms and with all SCSI host adapters but in this case performance shouldn't be worse than before. 2000-05-21 * released backend version 1.0-83 2000-05-21 * The Mustek Paragon 1200 A3 PRO is now detected. This is only a test release. Be carefull and read the PROBLEMS file if you want to try this scanner. 2000-05-19 * released backend version 1.0-82 2000-05-18 * set debug level for output of unknown Mustek scanner to 0 (suggestion from Thorben Kundinger) 2000-05-12 * fixed bug in distinguishing firmware formats * added shrinked image fix to ScanExpress 12000SP models <= v2.0 2000-05-08 * fixed remaining sane_cancel problems (in non_blocking mode) * fixed color stripes and segmentation fault for Paragon MFS-12000SP 1.00 (at least for me) * added more debug output to inquiry * added possibility to distinguish old and new firmware formats * added one more debug level (5) * added output of SANE version 2000-05-07 * released backend version 1.0-81 2000-05-06 * added transparency adapter support for the Paragon 600 II CD, 600S, 800 II SP, 600 II N, ScannExpress 6000SP and 12000SP * removed "color lineart" and "color halftone" for all scanners. These modes didn't work for any of my scanners. * added more debug output for ADF and TA * fixed bug when ADF is out of documents * Scan source option is only available if TA or ADF is present. For SE and N models TA is always available because it can't be detected by hardware * removed "backtrack", "speed" and "grain" from 600 II N options, the scanner doesn't support them * updated mustek.desc and mustek.man 2000-05-02 * Reduced scan area for the Paragon MFC-600S because of ugly noises at the end of the scan area 2000-04-29 * Adjusted scan area to the Windows driver defaults for ScanExpress 6000SP; added MUSTEK_FLAG_ENLARGE_X for this scanner * Added Warning for scanners that are not (fully) tested 2000-04-26 * changed sane_init to use sanei_config_read () and sanei_config_get_string () 2000-04-24 * released backend version 1.0-80 2000-04-23 * fixed lineart and color scanning >600 dpi for the SE 12000SP * added variable debug_level to be faster without debugging in attach () * fixed bug in mustek.conf handling; positional options were applied to the first device only * added an option to mustek.conf: "buffersize". This overwrites the default scan buffer sizes. The unit is kilobytes. * adjusted mustek.conf to more reasonable defaults * update manpage and mustek.desc to reflect the changes 2000-04-22 * fixed greyscale scanning >600 dpi for the SE 12000SP 2000-04-21 * added more debug output to sane_get_parameters 2000-04-20 * Output of scanning time now works with scanimage, too. * Adjusted scan area to the Windows driver defaults for Paragon MFS-6000CX * Added transparency adapter support for the Paragon MFS-6000CX and MFS-12000SP 2000-04-19 * Adjusted scan area to the Windows driver defaults for Paragon MFS-12000SP 2000-04-17 * added support for the sanei_scsi_open_extended method with variable buffersizes * removed support for SCSI queue. Couldn't find improvements for any scanner 2000-04-16 * removed "color lineart" and "color halftone" for single pass scanners. These modes didn't work for any of my scanners. * fixed problems in color mode for the MFS-8000SP (gamma table is now uploaded even if not selected) * Output "cover open" only for ScanExpress scanners (Paragon scanners don't have a cover sensor) * Added transparency adapter support for the Paragon MFS-6000SP and MFS-12000CX * Added output of transfer speed (kb/s) * maximum allocated memory for read request can be set by a #define * buffer size can be set on a per scanner basis * Adjusted scan area to the Windows driver defaults for Paragon 800 II SP * Added quotation marks to inquiry output 2000-04-15 * Adjusted scan area to the Windows driver defaults for Paragon 8000SP, ScanExpress 12000SP * Fixed scan area settings (TL-X and TL-Y) for transparency adapter (TA) * Added TA support for Paragon 8000SP 2000-04-13 * Added more debug output in sane_read and some other functions * removed warnings 2000-04-12 * Added more debug output concerning buffer handling 2000-04-10 * Adjusted scan area to the Windows driver defaults for Paragon 12000CX, 6000SP, 600 II CD, 600 II N 2000-04-09 * released backend version 1.0-79 2000-04-08 * added output of scanning time (debuglevel 2 and higher) * removed old code from sane_cancel 2000-04-07 * fixed line-distance correction for the 600 II N * rewrite of the 600 II N code * documentation update for the 600 II N 2000-04-06 * Rewrite of resolution encoding for 3-pass scanners * added more comments * some spelling errors corrected 2000-04-03 * output backend and version information * fixed resolution encoding for MFS12000cx * Changed version system to be compatible to the SANE standard (major, minor, build); 0.78 --> 1.0-78 2000-04-02 * released backend version 0.78 * added MUSTEK_FLAG_DOUBLE_RES for the MFS-12000CX 3-pass scanner, resolutions > 600 dpi should work now 2000-04-01 * reduced scan area for Paragon 800 S / II SP 2000-03-29 * released backend version 0.77 * inquiry is printed in full text at debug level 4 * more debug level tweaking * man page update * model name update 2000-03-25 * corrected some spelling errors 2000-03-24 * reduced scanarea for the MSF-6000SP * restructured scanner recognition 2000-03-18 * released backend version 0.76 2000-03-17 * removed some compiler warnings * changed the sane.model names (e.g. ScanExpress 12000SP instead of C06IDW...) * added SCSI information output to inquiry * adjusted debug levels and debug output 2000-03-15 * fixed typo in man page 2000-03-12 * released backend version 0.75 * man page update * mustek.desc update * test for option < 0 in sane_get_option_descriptor (thanks to Oliver Rauch) * added do_stop in sane_cancel (don't wait for next read that will possibly never happen) * fixed firmware version identification for newer ScanExpress models (patch from Marco G. Salvagno) * probably fixed linedistance correction at high resolutions for MFS-1200SP firmware 1.00 and possibly others (patch from Andreas Beck) * added check for ADF ready in sane_start (patch from Joerg Anders) * Bug fix in the STORE makros (patch from Norbert Mueller) 2000-03-06 * created mustek.CHANGES file * released backend version 0.74 * added linedistance correction for the 600 II N + documentation updates * added detection of newer ScanExpress models ("XC06" instead og " C06") * bugfix for 600 II N waiting 60 s before cancelling Henning Meier-Geinitz