/* FAME Door Commands * * $VER:FAMEDoorCommands.h v1.3 * * Used tab size: 2 */ #ifndef FAME_FAMEDOORCOMMANDS_H #define FAME_FAMEDOORCOMMANDS_H /* * GENERAL INFO's * -------------- * * -General use of Commands: * A Door normaly has to give values (numbers like confnumbers/usernumbers/ * flags etc..) into Data1 of the struct FAMEDoorMsg to the DoorPort. * If more values are needed the next Data will be used: Data2 and then * Data3. Values requested from a Door normaly can be found in Data2. * Only if a value needs a ULONG Data3 must be used. * * -The Door have to check the ReturnCode of struct FAMEDoorMsg!!! * See FAMEGlobalBBSStructs.h for defination of the ReturnCode. * * -Note that all structure elements of the struct FAMEDoorMsg are beginning * with fdom_ ! * * If you see the elements below like here: * * // Data1 * // Data2 * // Data3 * // IOString * * They have to be used like this: * * MyFAMEDoorMsg -> fdom_Data1 * MyFAMEDoorMsg -> fdom_Data2 * MyFAMEDoorMsg -> fdom_Data3 * MyFAMEDoorMsg -> fdom_IOString * * The same for all other structure elements! */ /* FIM FAME Interface Module */ /* FAME DOORCOMMANDS */ /* kEYwORD | mEANS | dESCRIPTION ----------------------------------- UNUSED <-> Not used yet! MC <-> Must Command! Every Door must call this Command once! NR <-> Normal Command! Most String operations (Retrieve/Send datas) NC <-> Normal Command! Most String operations (Change datas) CF <-> Call function! BBS Functions like Editor,Comp.Modem.NumLine SR <-> System Commands! (Retrieve/Send datas) SC <-> System Commands! (Change datas) AR <-> Additional Command! (Retrieve/Send datas) AC <-> Additional Command! (Change datas) RD <-> Reserved! Do not us it !!!!!!!!! define arrays: MC 1 - 9 NR 10 - 199 NC 200 - 399 CF 400 - 599 SR 600 - 699 SC 700 - 799 AR 800 - 899 AC 900 - 999 RD - 1000 - 9999 - means not secret but reserved. RD +10000 - 99999 + means secret and can't be used on the normal way. */ /* --------------- Description of special symboles: --------------------- <- means you have to or can set this variable. -> means this variable has something for you! U'r request and more. */ /* No longer used and free command numbers: #define CF_UnUsed1 416 #define SC_UnUsed1 700 #define SC_UnUsed2 701 */ /* ##################### COMMAND DEFINES BEGIN ########################## */ /* ------------------------- NR commands -------------------------------- */ #define MC_DoorStart 1 /* Register a new Door, counter increases * * U HAVE TO START THIS FIRST!!! */ #define MC_ShutDown 2 /* Tells the node that the door is shutting down, counter decreases * * U HAVE TO USE THIS ON ENDING A DOOR! ALSO ON ENDING BECAUSE OF AN ERROR! * * U ALSO CAN USE ALTERNATIVE MC_ShutDownLastWords! */ #define MC_ShutDownLastWords 3 /* Tells the node that the door is shutting down also write some last words, * counter decreases * * Data1 * Data2 * Data3 * IOString <- The string to be send to the user. * * U HAVE TO USE THIS ON ENDING A DOOR! ALSO ON ENDING BECAUSE OF AN ERROR! * * U ALSO CAN USE ALTERNATIVE MC_ShutDown! */ #define NR_SendStr 10 /* Sends a String to the User * * Data1 * Data2 * Data3 * IOString <- The string to be send to the user. */ #define NR_SendStrCRLF 11 /* Sends a String to the User with CR/LF * * Data1 * Data2 * Data3 * IOString <- The string to be send to the user. */ #define NR_SendStrCon 12 /* Sends a String to the Console only * * Data1 * Data2 * Data3 * IOString <- The string to be send to the console. */ #define NR_SendStrSer 13 /* Sends a String to the Serial only * * Data1 * Data2 * Data3 * IOString <- The string to be send to the serial. */ #define NR_PromptChars 14 /* Prompt the user for a specified number of chars * * Data1 <- Max. chars can be typed. * Data2 <- Flag for different modes. * Data3 -> Returncode from internal procedure (usable for Data2 flag 3). * IOString <- String will be used in prompt. * IOString -> Filled string with chars typed by the user. * * Data2 flag description: * * 0 Simple stringingput without edit and other features. * 1 Stringingput for chatmode. (uses wordwrapping. Do not use this to get a * complete string, because after a wordwrap the string changes). * 2 Stringingput for MsgEditor. (You can't use this flag! It can cause * damage, because it uses an internal list. Flag denied. * 3 Stringingput for bulletinviewer. (It returns cursorkeys left and right * up and down for the bullview to switch -(x)-BullHelp.txt texts. * Data3 contains: Up: 65 Down: 66 Rigth: 67 Left: 68. * 4 The same as 0, but all chars will be displayed as *. Like: ****** , * but they musn't be displayed as * on console! If the flag "Display * Passwords to SysOp" is set the chars will be displayed as real chars * on console. * 5 Unused. * 6 A real feature! This is the best flag u can use! U let the user totaly * edit his string. The user can walk into the string, delete chars with * delete and backspace and the user can insert at every position new chars. * 7 The same as 4, but here will definality no single char be typed on the * screen. No single char means also NO stars (*). Only exception is if * the flag "Display Passwords to SysOp" is set the chars will be displayed * as real chars, but only on console. * 8 Numeric mode only. Only alphanumeric chars can be typed and no * alphabetical ones. * * Higher flags are reserved and can't be used. * Normaly u can only use flag 0 and 6 !!! * * If IOString contains data on calling this command, the user will get this * data into the prompt, and can edit it (flag 6). */ #define NR_HotKey 15 /* Gets a char without waiting for it * * Data1 * Data2 -> The char typed by the user. * Data3 -> 0 = Console char, 1 = Serial char. * IOString * * Note: This command checks for a available char. If there is a char * available you will get it immediatly, else you will get 0 in * Data2. * * Note: NR_HotKey is the same as AR_GetKey, but on AR_GetKey you wont * get the char, only a notify that a char was pressed. * Here on NR_HotKey you will get this pressed key. */ #define NR_BBSName 16 /* Retrieve the BBS Name * * Data1 * Data2 * Data3 * IOString -> The BBS Name. */ #define NR_SysOp 17 /* Retrieve the Sysop Name * * Data1 * Data2 * Data3 * IOString -> The SysOp Name. */ #define NR_SetFlagFile 18 /* Add Files to the Flaglist * * Data1 <- The conferencenumber in which you want to flag files. * Data2 * Data3 -> Errormsg 0 on success. * IOString <- The file(s) to be flagged, you can flag more files at the same * time, but they must have spaces beetween each other flag. * maximum of 12 chars per flag and overall 201 chars including * the spaces. Note that the BBS filters double flags. * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! * * Note: Data3 is errormsg: * 0 means successfull flagged. * 1 means file allready flagged. * 2 means length of IOString is lower than byte, maybe not true here, * because of more files to be flagged. * -1 means list element memory allocation faild. * -2 means given conference not found, normaly not happens here, * because of Data1 check.  * Think of that here may be flagged more than one file, this may have * to result that 1, 2 and -1 musn't be correct! * But it must be correct if IOString contains only one file. */ #define NR_GetFlagFile 19 /* Get File from the Flaglist * * Data1 <- The conferencenumber from which you want to get a flagged file. * Data2 * Data3 * IOString -> The filename of the flagged file. * StructDummy1 -> The struct FileList. * * Note: This command counts the flagnumbers itself! That means if you got * a flag, you will get the next flag if you call this commandd again! * This happens till no more flags are available! * To reset this you have to use the command: NR_ResetFlagFile! * But if you use NR_ResetFlagFile you get also on that command the FIRST * flagged file! That means first use NR_ResetFlagFile and get the * first fileflag, from now on use NR_GetFlagFile to get the next * flagged files... if the IOString is empty no more flagged files * are available. * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define NR_ActiveNode 20 /* Check for a specific Node exists * * Data1 <- The Node you want to check if it exists or not. * Data2 -> 1 if Node exists, 0 if it doesn't. * Data3 * IOString */ #define NR_ActiveNodes 21 /* Retrieve a string of active&inactive nodes * * Data1 * Data2 * Data3 * IOString -> A String contains on every charposition an X if the relative * Node exists. Byte 0 stands for Node0 ! * A maximum of 200 Nodes will be checked. */ #define NR_TimeOut 22 /* Retrieve the door timeout limit * * Data1 * Data2 -> Contains the door timeout limit. * Data3 * IOString */ #define NR_MainLine 23 /* Retrieve the menu prompt arguments prior to the door being entered * * Data1 * Data2 * Data3 * IOString -> Contains the MainLine, the full argumentstring which was * used on starting this door! * Note that FAME makes no difference on typing arguments! * You can have so much spaces you are willing to on the menu * command between arguments, FAME will interpret it! * This means it could be possible that the String you get * can look like this one: " who u force ". * This means you should interpret it also! * If this is to much work for you, you should use instead the * commands: NR_GetFullArg, NR_GetArgument1 ,NR_GetArgument2, * NR_GetArgument3 and NR_GetArgument4. The first has sorted * the first 4 arguments, all other arguments are like they are * typed in. NR_GetArgument(1-4) is every single argument. * But on those commands you get ONLY the arguments, not the * commandname! */ #define NR_NodeID 24 /* Retrieve the Node number for the current node * * Data1 * Data2 -> The current Nodenumber. * Data3 * IOString */ #define NR_MinUpCPS 25 /* Retreive Min Upload CPS * * Data1 * Data2 -> Users min. Upload CPS. * Data3 * IOString */ #define NR_GetConfNum 26 /* Retrieve the current Conf number * * Data1 * Data2 -> Cotains the actual Conferencenumber. * Data3 * IOString */ #define NR_SearchAccount 27 /* Looks for Account in Userdatas * * Data1 <- The usernumber you are searching for. * Data2 * Data3 * IOString * StructDummy1 -> The userkey structure of the user. * You have to check the ReturnCode! If it's non zero the StructDummy1 isn't valid!!! */ #define NR_StampTime 28 /* Retrieve the current time string * * Data1 * Data2 * Data3 * IOString -> Contains the current timestring. */ #define NR_CurrTime 29 /* Retrieve the current time in seconds since January * * Data1 * Data2 -> Contains the current timevalue. * Data3 * IOString */ #define NR_ThisConfAccess 30 /* Retrieve the users conference access of selected Conf * * Data1 <- The Confnumber you are checking the access of the online user. * Data2 -> 1 if the user has access to the conference, else 0. * Data3 * IOString * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define NR_Name 31 /* Retrieve users name/handle * * Data1 * Data2 * Data3 * IOString -> Contains the UserName. */ #define NR_Password 32 /* Retrieve users password * * Data1 * Data2 * Data3 * IOString -> Contains the Userpassword. */ #define NR_Location 33 /* Retrieve users location * * Data1 * Data2 * Data3 * IOString -> Contains the User's location. */ #define NR_From 34 /* Retrieve users from * * Data1 * Data2 * Data3 * IOString -> Contains the User's origin. */ #define NR_PhoneNumber 35 /* Retrieve users phone number * * Data1 * Data2 * Data3 * IOString -> Contains the User's phonenumber. */ #define NR_SlotNumber 36 /* Retrieve users slot number * * Data1 * Data2 -> Contains the User's slotnumber. * Data3 * IOString */ #define NR_AccessLevel 37 /* Retrieve users access level * * Data1 * Data2 -> Contains the User's level. * Data3 * IOString */ #define NR_RatioType 38 /* Retrieve users ratiotype * * Data1 * Data2 -> Contains the User's ratiotype. * Data3 * IOString */ #define NR_Ratio 39 /* Retrieve users ratio * * Data1 * Data2 -> Contains the User's ratio. * Data3 * IOString */ #define NR_CompType 40 /* Retrieve users computertype code * * Data1 * Data2 -> Contains the User's computertype code. * Data3 * IOString -> Contains the User's computer. */ #define NR_ModemType 41 /* Retrieve users modemtype code * * Data1 * Data2 -> Contains the User's modemtype code. * Data3 * IOString -> Contains the User's modem. */ #define NR_MessagePosted 42 /* Retrieve users messagesposted * * Data1 * Data2 * Data3 -> Contains the User's message posted. * IOString */ #define NR_MessageRead 43 /* Retrieve the number of readen Msg's * * Data1 * Data2 * Data3 -> Contains the User's message read. * IOString */ #define NR_NoCalls 44 /* Retrieve number of usercalls * * Data1 * Data2 * Data3 -> Contains the User's calls. * IOString */ #define NR_TimeLastOn 45 /* Retrieve time user last called * * Data1 * Data2 -> Contains the User's last time called. * Data3 * IOString */ #define NR_TimeUsed 46 /* Retrieve timeused today * * Data1 * Data2 -> Contains the User's time used. * Data3 * IOString */ #define NR_TimeLimit 47 /* Retrieve timeallowed for a user * * Data1 * Data2 -> Contains the User's time limit. * Data3 * IOString */ #define NR_TimeRemain 48 /* Retrieve total time remaining * * Data1 * Data2 -> Contains the User's total time remain. * Data3 * IOString */ #define NR_StampLastOn 49 /* Retrieve the date string containing the date when the user last logged on * * Data1 * Data2 * Data3 * IOString -> Contains the User's last time called as an timestring. */ #define NR_ConfAccess 50 /* Retrieve the users conference access * * Data1 * Data2 * Data3 * IOString -> Contains the User's conference access alias. */ #define NR_Uploads 51 /* Retrieve number of useruploads * * Data1 * Data2 * Data3 -> Contains the User's number of uploads. * IOString */ #define NR_Downloads 52 /* Retrieve number of userdownloads * * Data1 * Data2 * Data3 -> Contains the User's number of downloads. * IOString */ #define NR_BytesUpload 53 /* Retrieve bytes uploads per user * * Data1 * Data2 * Data3 -> Contains the User's bytes uploaded. * IOString */ #define NR_BytesDownload 54 /* Retrieve bytes downloaded per user * * Data1 * Data2 * Data3 -> Contains the User's bytes downloaded. * IOString */ #define NR_DailyByteLimit 55 /* Retrieve a users daily byte * * Data1 * Data2 * Data3 -> Contains the User's daily byte limit. * IOString */ #define NR_DailyFileLimit 56 /* Retrieve a users daily files * * Data1 * Data2 * Data3 -> Contains the User's daily file limit. * IOString */ #define NR_DailyByteDld 57 /* Retrieve daily bytes downloaded * * Data1 * Data2 * Data3 -> Contains the User's daily bytes downloaded. * IOString */ #define NR_DailyFileDld 58 /* Retrieve daily files downloaded * * Data1 * Data2 * Data3 -> Contains the User's daily files downloaded. * IOString */ #define NR_DailyByteBonus 59 /* Retrieve daily byte bonus from user * * Data1 * Data2 * Data3 -> Contains the User's daily byte bonus. * IOString */ #define NR_DailyFileBonus 60 /* Retrieve daily file bonus from user * * Data1 * Data2 * Data3 -> Contains the User's daily file bonus. * IOString */ #define NR_Expert 61 /* Retrieve expert mode * * Data1 * Data2 -> 1 means Expertmode is set, else 0 means it's not. * Data3 * IOString */ #define NR_NumLines 62 /* Retrieve user number of lines * * Data1 * Data2 -> Contains the User's number of lines. * Data3 * IOString * * Note: The number of lines is in real 1 line more than u will get here, * because of scrolling texts u must have 1 line in reserve. */ #define NR_Birthday 63 /* Retrieve the users Birthday * * Data1 * Data2 * Data3 * IOString -> Contains the User's birthday. */ #define NR_MenuPrompt 64 /* Retrieve the users Menuprompt * * Data1 * Data2 * Data3 * IOString -> Contains the User's menuprompt. */ #define NR_EditorType 65 /* Retrieve the users Editor type * * Data1 * Data2 -> Contains the User's editor type. * Data3 * IOString */ #define NR_XferProt 66 /* Retrieve the User's (last) used transfer protocol * * Data1 * Data2 -> Contains the User's (last) used transfer protocol value. * Data3 * IOString -> Contains the User's (last) used transfer protocol name. */ #define NR_LostCarrier 67 /* Retrieve the number of Los Carriers * * Data1 * Data2 -> Contains the User's numbers of loss carriers. * Data3 * IOString */ #define NR_Zoom 68 /* Retrieve the ZOOM type * * Data1 * Data2 -> Contains the User's Zoom type. * Data3 * IOString */ #define NR_SysLanguage 69 /* Retrieve the current System language specifications * * Data1 * Data2 * Data3 * IOString -> Contains the User's tetx language specification. */ #define NR_Language 70 /* Retrieve the current language specifications * * Data1 * Data2 -> Contains the User's current language setting. * Data3 * IOString */ #define NR_LineCount 71 /* Retrieve the current number of lines viewed * * Data1 * Data2 -> Contains the current number of lines viewed. * Data3 * IOString */ #define NR_AnsiColor 72 /* Retrieve the ANSI flag * * Data1 * Data2 -> Contains the User's Ansiflag. * Data3 * IOString */ #define NR_SentBy 73 /* Retrieve the SentBy Line * * Data1 <- The conferencenumber in which u want to change the SentByLine * Data2 * Data3 * IOString -> Contains the User's SentBy line. */ #define NR_AutoFileID 74 /* Retrieve the Auto FILE_ID.DIZ * * Data1 * Data2 -> Contains the User's fileid flag. * Data3 * IOString */ #define NR_NewMessage 75 /* Retrieve the NewMessage Status * * Data1 * Data2 -> Contains the User's newscan flag. * Data3 * IOString */ #define NR_Goodbye 76 /* Retrieve the Goodbye Flag * * Data1 * Data2 -> Contains the User's (fast)goodbye flag. * Data3 * IOString */ #define NR_ViewFlag 77 /* Retrieve the View Flag * * Data1 * Data2 -> Contains the User's view flag. * Data3 * IOString */ #define NR_ZippyFlag 78 /* Retrieve the Zippy Flag * * Data1 * Data2 -> Contains the User's zippy flag. * Data3 * IOString */ #define NR_ReplyMSGFlag 79 /* Retrieve the ReplyMS Flag * * Data1 <- The conferencenumber in which u want to change the SentByLine * Data2 -> Contains the User's reply msg flag * Data3 * IOString */ #define NR_NukedFiles 80 /* Retrieve the NukedFiles * * Data1 * Data2 * Data3 -> Contains the User's nuked files. * IOString */ #define NR_NukedBytes 81 /* Retrieve the NukedBytes * * Data1 * Data2 * Data3 -> Contains the User's nuked bytes. * IOString */ #define NR_MinDownCPS 82 /* Retrieve the Min Downlaod CPS * * Data1 * Data2 -> Contains the User's min. download CPS. * Data3 * IOString */ #define NR_GetEditString 83 /* Prompt the user for a specified number of chars and edits String * * Data1 <- Max. chars can be typed. * Data2 <- Flag for different modes. * Data3 -> Returncode from internal procedure (usable for Data2 flag 3). * IOString <- String will be used in prompt. * IOString -> Filled string with chars typed by the user. * * Data2 flag description: * * 0 Simple stringingput without edit and other features. * 1 Stringingput for chatmode. (uses wordwrapping. Do not use this to get a * complete string, because after a wordwrap the string changes). * 2 Stringingput for MsgEditor. (You musn't use this flag! It can cause * damage, because it uses an internal list. * 3 Stringingput for bulletinviewer. (It returns cursorkeys left and right * up and down for the bullview to switch -(x)-BullHelp.txt texts. * Data3 contains: Up: 65 Down: 66 Rigth: 67 Left: 68. * 4 The same as 0, but all chars will be displayed as *. Like: ****** , * but they musn't be displayed as * on console! If the flag "Display * Passwords to SysOp" is set the chars will be displayed as real chars * on console. * 5 Unused. * 6 A real feature! This is the best flag u can use! U let the user totaly * edit his string. The user can walk into the string, delete chars with * delete and backspace and the user can insert at every position new chars. * 7 The same as 4, but here will definality no single char be typed on the * screen. No single char means also NO stars (*). Only exception is if * the flag "Display Passwords to SysOp" is set the chars will be displayed * as real chars, but only on console. * 8 Numeric mode only. Only alphanumeric chars can be typed and no * alphabetical ones. * * Higher flags are reserved and can't be used. * Normaly u can only use flag 0 and 6 !!! * * If IOString contains data on calling this command, the user will get this * data into the prompt, and can edit it (flag 6). * * Note: NR_GetEditString is nearly the same as NR_PromptChars. In fact it * is the same, but if you use NR_GetEditString no Data2 (mode flag) * check will be done. Here you can use undocumented, obsolete and non * existing modes. Beware of what you're doing it can result in crashes * if you use for example flag number 2. */ #define NR_ResetFlagFile 84 /* Reset and get the first file from the Flaglist * * Data1 <- The conferencenumber from which you want to get a flagged file. * Data2 * Data3 * IOString -> The filename of the first flagged file. * StructDummy1 -> The struct FileList. * * Note: Use NR_ResetFlagFile at first! You will reset the internal counter * and get the first flagged file! That means first use NR_ResetFlagFile * and get the first fileflag, from now on use NR_GetFlagFile to get * the next flagged files... * If IOString is empty no flagged files are available. * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define NR_DeleteFlagFile 85 /* Delete File of the Flaglist * * Data1 <- The conferencenumber in which u want to delete a flagged file. * Data2 <- If true the file will not be deleted if the FFFL_NODELETE flag * of the file flag is set. If false flag will be deleted in any * case. * Data3 * IOString <- The file or match to delete file(s). * * Note: U can use a full filename and also a match like abc* or abc+ * or * or + and so on to delete files. * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define NR_DelFlagFileNum 86 /* Delete File of the Flaglist with the fileflagnumber * * Data1 <- The conferencenumber in which u want to delete a flagged file. * Data2 <- The number of a flag u want to delete. * Data3 * IOString * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define NR_GetFullArg 87 /* Retrieve the full Argumentstring * * Data1 * Data2 * Data3 * IOString -> Will be the string of all arguments. * * The first 4 arguments will automaticly be sorted by FAME, arguments after * argument with a single space between each other, but all other orguments * behind 4 will be like they are typed it. */ #define NR_GetArgument1 88 /* Get the first argument * * Data1 * Data2 * Data3 * IOString -> Will be the first argument seperatly. */ #define NR_GetArgument2 89 /* Get the second argument * * Data1 * Data2 * Data3 * IOString -> Will be the second argument seperatly. */ #define NR_GetArgument3 90 /* Get the third argument * * Data1 * Data2 * Data3 * IOString -> Will be the third argument seperatly. */ #define NR_GetArgument4 91 /* Get all other arguments * * Data1 * Data2 * Data3 * IOString -> Will be the fourth and all other arguments. */ #define NR_WaitChar 92 /* Get a char with waiting for it * * Data1 * Data2 -> The char typed be the user. * Data3 -> 0 = Console char, 1 = Serial char. * IOString <- String will be displayed to the user. * * Note: You get all ascii codes also RAW codes, but only the CSI codes and * escape-sequences will be filtered, because the BBS has to check for * FKeys and more. * You will get the cursorkeys as the following values: * 4 for UP, 5 for DOWN, 3 for RIGHT and 2 for LEFT. */ #define NR_GetConFontSize 93 /* Get the Console Font height and width * * Data1 * Data2 -> height. * Data3 -> width. * IOString */ #define NR_ResetANSI 94 /* Reset console and serial attributes to standart values * * Data1 * Data2 * Data3 * IOString * * No Data needed. */ #define NR_ResetANSIOnExit 95 /* Set a flag to let the node reset console and serial attributes to * standart values on MC_ShutDown / MC_ShutDownLastWord * * Data1 * Data2 * Data3 * IOString * * No Data needed. */ #define NR_CONNumLines 96 /* Retrieve the number of lines from the console * * Data1 * Data2 -> Contains the number of lines. * Data3 * IOString * * This function is important if you must create a Screen "View" and the * user has more lines on his screen than the sysop on the user's node * screen. You may handle the sysop's display separately from the user view ! * * Note: The number of lines is in real 1 line more than u will get here, * because of scrolling texts u must have 1 line in reserve. */ #define NR_NumberOfChats 97 /* Retrieve the number of chats * * Data1 * Data2 * Data3 -> Contains the number of chats. * IOString */ #define NR_NumberOfPages 98 /* Retrieve the number of pages * * Data1 * Data2 -> Contains the number of pages. * Data3 * IOString * */ #define NR_NumberOfDayPages 99 /* Retrieve the number of day pages * * Data1 * Data2 -> Contains the number of day pages. * Data3 * IOString */ #define NR_NumOfPagesAllowed 100 /* Retrieve the number of pages allowed per day * * Data1 * Data2 -> Contains the number of pages per day. * Data3 * IOString */ #define NR_NumberOfDayRelogs 101 /* Retrieve the number of day relogins * * Data1 * Data2 -> Contains the number of day relogins. * Data3 * IOString */ #define NR_NumOfRelogsAllowed 102 /* Retrieve the number of relogins allowed per day * * Data1 * Data2 -> Contains the number of relogins per day. * Data3 * IOString */ #define NR_DoorHelp 103 /* Try to load and display online user help * * Data1 * Data2 * Data3 * IOString <- Minimum Version.Revision string. Eample: "1.23" * StringPtr <- Help file name without any paths. * * Note: Nearly all Arguments are invalid after usage! * Especialy NR_MainLine and NR_GetArgument1 command arguments! */ #define NR_SetDoorReturnCode 104 /* Set DoorReturnCode * * Data1 <- The new DoorReturnCode. * Data2 * Data3 * IOString */ #define NR_GetDoorReturnCode 105 /* Retrieve DoorReturnCode * * Data1 * Data2 -> Contains the DoorReturnCode. * Data3 * IOString */ #define NR_ClrFileFlgLst 106 /* Delete all file flags in a single confernece * * Data1 <- The conference number. * Data2 * Data3 * IOString * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define NR_ClrFileFlgLsts 107 /* Delete all file flags in all conferneces * * Data1 * Data2 * Data3 * IOString */ #define NR_GetRelativeStatus 108 /* Retrieve the relative status. Has this node relative conferences? * * Data1 * Data2 -> The relative status, if non 0 relative is on. * Data3 * IOString */ #define NR_AbsToRel 109 /* Convert an absolute confernece number (real) to the relative one. * * Data1 <- Your absolute conference number. * Data2 -> The relative conference number. * Data3 * IOString * * Note: If Data2 is 0 the user has no access to this conference. * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define NR_RelToAbs 110 /* Convert a relative confernece number to the absolute (real) one. * * Data1 <- Your relative conference number. * Data2 -> The absolute conference number. * Data3 * IOString * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current relative conference * number! */ #define NR_GetAbortIOPort 111 /* Get the AbortIO MsgPort * * Data1 * Data2 * Data3 * IOString * StructDummy1 -> The AbortIO MsgPort structure */ #define NR_GetDoorDatas 112 /* Get datas of your door like the path * * Data1 * Data2 * Data3 * IOString -> The path from where FAME has started your door. * StringPtr -> The complete path + door file name. * StructDummy1 -> Pointer to struct dOORS (Developer only). */ #define NR_GetDoorCallName 113 /* Get the DoorCallName. * * Data1 * Data2 * Data3 * IOString -> The DoorCallName. */ #define NR_GetUserLevelFlags 114 /* Get the level flags for the actual user. * * Data1 * Data2 -> MaxPages * Data3 -> MaxRelogins * IOString -> Array of level flags. * * Note: You will get an Array (IOString) where you can use the level defines * to see if a level flag is set. * True / (1) = (flag set), false / 0 = (flag not set). * If in the position you check the value is 0 the level flag * is not set and the user isn't able to do this. If the value is * <> 0 or != 0 (not 0) it's set and the user is able to do this. * * Note: For the level defines used in the array see FAMEDefine.h * FLVL_ ( FLVL_ ) defines. * * Example 1: * * PutCommand("",0,0,0,NR_GetUserLevelFlags); * * if(MyFAMEDoorMsg -> fdom_IOString[ FLVL_CommenttoSysOp ]) * PutString("\r\nComment to SysOp allowed!\r\n",1); * else * PutString("\r\nNo comment to SysOp allowed!\r\n",1); * * Example 2: * * PutCommand("",0,0,0,NR_GetUserLevelFlags); * * if(MyFAMEDoorMsg -> fdom_IOString[ FLVL_CommenttoSysOp ] == 0) * PutString("\r\nNo comment to SysOp allowed!\r\n",1); * else * PutString("\r\nComment to SysOp allowed!\r\n",1); * */ /* ------------------------- NC commands -------------------------------- */ #define NC_TimeOut 200 /* Change the door timeout limit * * Data1 <- The new doortimeout. * Data2 * Data3 * IOString */ #define NC_Name 201 /* Change users name/handle * * Data1 * Data2 * Data3 * IOString <- The new username of the online user (max. 30 chars). * * Note: If ReturnCode=1 the username allready exists! Nothing changed! */ #define NC_Password 202 /* Change users password * * Data1 * Data2 * Data3 * IOString <- The new password of the online user (max. 20 chars). */ #define NC_Location 203 /* Change users location * * Data1 * Data2 * Data3 * IOString <- The new location of the online user (max. 30 chars). */ #define NC_From 204 /* Change users from * * Data1 * Data2 * Data3 * IOString <- The new origin of the online user (max. 30 chars). */ #define NC_PhoneNumber 205 /* Change users phone number * * Data1 * Data2 * Data3 * IOString <- The new phonenumber of the online user (max. 15 chars). */ #define NC_AccessLevel 206 /* Change users access level * * Data1 <- The new level of the online user. * Data2 * Data3 * IOString */ #define NC_RatioType 207 /* Change users ratiotype * * Data1 <- The new ratiotype of the online user. * Data2 * Data3 * IOString */ #define NC_Ratio 208 /* Change users ratio * * Data1 <- The new ratio of the online user. * Data2 * Data3 * IOString */ #define NC_CompType 209 /* Change users computertype code * * Data1 <- The new computertype of the online user. * Data2 * Data3 * IOString <- The new computer. */ #define NC_ModemType 210 /* Change users modemtype code * * Data1 <- The new modemtype of the online user. * Data2 * Data3 * IOString <- The new modem. */ #define NC_MessagePosted 211 /* Change users messagesposted * * Data1 * Data2 * Data3 <- The new messagesposted of the online user. * IOString */ #define NC_MessageRead 212 /* Change the number of readen Msg's * * Data1 * Data2 * Data3 <- The new messageread of the online user. * IOString */ #define NC_NoCalls 213 /* Change number of usercalls * * Data1 * Data2 * Data3 <- The new number of calls of the online user. * IOString */ #define NC_TimeLastOn 214 /* Change time user last called * * Data1 <- The new last time called of the online user. * Data2 * Data3 * IOString */ #define NC_TimeUsed 215 /* Change timeused today * * Data1 <- The new timeused today of the online user. * Data2 * Data3 * IOString */ #define NC_TimeLimit 216 /* Change timeallowed for a user * * Data1 <- The new timeallowed of the online user. * Data2 * Data3 * IOString */ #define NC_TimeRemain 217 /* Change total time remaining * * Data1 <- The new total time remaining of the online user. * Data2 * Data3 * IOString */ #define NC_Uploads 218 /* Change number of useruploads * * Data1 * Data2 * Data3 <- The new number of useruploads of the online user. * IOString */ #define NC_Downloads 219 /* Change number of userdownloads * * Data1 * Data2 * Data3 <- The new number of userdownloads of the online user. * IOString */ #define NC_BytesUpload 220 /* Change bytes uploads per user * * Data1 * Data2 * Data3 <- The new bytes uploaded of the online user. * IOString */ #define NC_BytesDownload 221 /* Change bytes downloaded per user * * Data1 * Data2 * Data3 <- The new bytes downloaded of the online user. * IOString */ #define NC_DailyByteLimit 222 /* Change a users daily byte * * Data1 * Data2 * Data3 <- The new users daily byte of the online user. * IOString */ #define NC_DailyFileLimit 223 /* Change a users daily files * * Data1 * Data2 * Data3 <- The new users daily files of the online user. * IOString */ #define NC_DailyByteDld 224 /* Change daily bytes downloaded * * Data1 * Data2 * Data3 <- The new daily bytes downloaded of the online user. * IOString */ #define NC_DailyFileDld 225 /* Change daily files downloaded * * Data1 * Data2 * Data3 <- The new daily files downloaded of the online user. * IOString */ #define NC_DailyByteBonus 226 /* Change daily byte bonus from user * * Data1 * Data2 * Data3 <- The new daily byte bonus of the online user. * IOString */ #define NC_DailyFileBonus 227 /* Change daily file bonus from user * * Data1 * Data2 * Data3 <- The new daily file bonus of the online user. * IOString */ #define NC_Expert 228 /* Change expert mode * * Data1 <- The new expert mode of the online user. * Data2 * Data3 * IOString */ #define NC_NumLines 229 /* Change user number of lines * * Data1 <- The new number of lines of the online user. * Data2 * Data3 * IOString * * Note: You have to set Data1 one line less than the full number of lines of * the screen, because of scrolling texts u must have 1 line in reserve. */ #define NC_Birthday 230 /* Change the users Birthday * * Data1 * Data2 * Data3 * IOString <- The new Birthday of the online user (max. 10 chars). */ #define NC_MenuPrompt 231 /* Change the users Menuprompt * * Data1 * Data2 * Data3 * IOString <- The new Menuprompt of the online user (max. 200 chars). */ #define NC_EditorType 232 /* Change the users Editor type * * Data1 <- The new Editor type of the online user. * Data2 * Data3 * IOString */ #define NC_XferProt 233 /* obsolete * * Data1 * Data2 * Data3 * IOString */ #define NC_Zoom 234 /* Change the ZOOM type * * Data1 <- The new ZOOM type of the online user. * Data2 * Data3 * IOString */ #define NC_SysLanguage 235 /* Change the current System language specifications * * Data1 * Data2 * Data3 * IOString <- The new System language of the online user (max. 30 chars). */ #define NC_Language 236 /* Change the current language specifications * * Data1 <- The new language of the online user. * Data2 * Data3 * IOString */ #define NC_LineCount 237 /* Change the user's current number of lines viewed * * Data1 <- The new number of lines viewed. * Data2 * Data3 * IOString */ #define NC_AnsiColor 238 /* Change the ANSI flag * * Data1 <- The new ANSI flag of the online user. * Data2 * Data3 * IOString */ #define NC_SentBy 239 /* Change the SentBy Line * * Data1 <- The conferencenumber in which u want to change the SentByLine * Data2 * Data3 * IOString <- The new SentBy Line of the online user (max 45 chars). * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define NC_AutoFileID 240 /* Change the Auto FILE_ID.DIZ * * Data1 <- The new Auto FILE_ID.DIZ of the online user. * Data2 * Data3 * IOString */ #define NC_NewMessage 241 /* Change the NewMessage Status * * Data1 <- The new NewMessage Status of the online user. * Data2 * Data3 * IOString */ #define NC_Goodbye 242 /* Change the Goodbye Flag * * Data1 <- The new Goodbye Flag of the online user. * Data2 * Data3 * IOString */ #define NC_ViewFlag 243 /* Change the View Flag * * Data1 <- The new View Flag of the online user. * Data2 * Data3 * IOString */ #define NC_ZippyFlag 244 /* Change the Zippy Flag * * Data1 <- The new Zippy Flag of the online user. * Data2 * Data3 * IOString */ #define NC_ReplyMSGFlag 245 /* Change the ReplyMSG Flag * * Data1 <- The conferencenumber you are going to change the ReplyMSG Flag. * Data2 <- The new ReplyMSG Flag of the online user. * Data3 * IOString * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define NC_NukedFiles 246 /* Change the NukedFiles * * Data1 * Data2 * Data3 <- The new NukedFiles of the online user. * IOString */ #define NC_NukedBytes 247 /* Change the NukedBytes * * Data1 * Data2 * Data3 <- The new NukedBytes of the online user. * IOString */ #define NC_MinUpCPS 248 /* Change the Min Upload CPS * * Data1 <- The new Min Upload CPS of the online user. * Data2 * Data3 * IOString */ #define NC_MinDownCPS 249 /* Change the Min Download CPS * * Data1 <- The new Min Download CPS of the online user. * Data2 * Data3 * IOString */ #define NC_LostCarrier 250 /* Change the number of Los Carriers * * Data1 <- The new number of Los Carriers of the online user. * Data2 * Data3 * IOString */ #define NC_NumberOfChats 251 /* Change the number of chats * * Data1 * Data2 * Data3 <- The new number of chats. * IOString * */ #define NC_NumberOfPages 252 /* Change the number of pages * * Data1 <- The new number of pages. * Data2 * Data3 * IOString * */ #define NC_NumberOfDayPages 253 /* Change the number of day pages * * Data1 <- The new number of day pages. * Data2 * Data3 * IOString * */ #define NC_NumberOfDayRelogs 254 /* Retrieve the number of day relogins * * Data1 <- The new number of day relogins. * Data2 * Data3 * IOString */ #define NC_Nuked 255 /* Called from a Nuker to update the nuked bytes and files * * Data1 <- The number of files nuked. * Data2 * Data3 <- The number of bytes nuked. * IOString * * Note: Data1 and Data3 are files and bytes nuked by the nuker and they * will be added to the user's datas. * * Note: This command will also call all doors found under SYSCMD * NUKED and NUKED */ #define NC_NukedAfter 256 /* Called from a Nuker to update the nuked bytes and files * * Data1 <- The number of files nuked. * Data2 * Data3 <- The number of bytes nuked. * IOString * * Note: Data1 and Data3 are files and bytes nuked by the nuker and they * will be added to the user's datas. * * Note: This command will also call all doors found under SYSCMD * NUKED and NUKED, but not before the Nuker has shut down. */ /* ------------------------- CF commands -------------------------------- */ #define CF_ShowText 400 /* Shows a Textfile without Suffix * * Data1 * Data2 * Data3 * IOString <- the complete path and filename of the text to be viewed. * * Note: You have to give the complete path and filename incl. the suffix! * BBS:Bull.txt */ #define CF_ShowTextSuffix 401 /* Shows a Textfile with full Suffix * * Data1 * Data2 * Data3 * IOString <- the complete path and filename of the text to be viewed. * * Note: You have to give the complete path and filename, but without suffix! * BBS:Bull can be BBS:Bull.txt or BBS:Bull.ger ... */ #define CF_ShowTextSufLvl 402 /* Shows a Textfile with full Suffix & Level * * Data1 * Data2 * Data3 * IOString <- the complete path and filename of the text to be viewed. * * Note: You have to give the complete path and filename, but without suffix! * The Level will automaticly be searched and inserted! * BBS:Bull can be BBS:Bull100.txt or BBS:Bull255.txt or BBS:Bull10.ger */ #define CF_ExecuteCommand 403 /* Execute a menu command including doors if available * * Data1 * Data2 * Data3 * IOString <- The command to be executed. */ #define CF_InternalCmd 404 /* Execute an internal menu command * * Data1 * Data2 * Data3 * IOString <- The internal menu command to be executed. */ #define CF_ZModemSend 405 /* Send file to the user via Zmodem protocol * * Data1 * Data2 -> Returns the status. * 1 file has been transfered. * 0 file has been copied local to sysops download directory. * -1 means xprzmodem.library not open. * Data3 * IOString <- The File to be sended to the user. */ #define CF_ZModemReceive 406 /* Receive files via Zmodem protocol * * Data1 * Data2 -> Returns the status. 1 means all seems to be going right. * 0 means xprzmodem.library not open. * Data3 * IOString <- The path for the file to be sended to. * * Note: You have to give a path! Else the transfer won't begin! */ #define CF_ZModemSendLst 407 /* Send files to the user via Zmodem protocol from Flaglist * * Data1 * Data2 -> Returns the status. * 1 file has been transfered. * 0 file has been copied local to sysops download directory. * -1 means xprzmodem.library not open. * Data3 * IOString * StringPtr <- A Stringpointer of nearly unlimited filenames incl. path. * Between every single path/filename has to be a space. * Maximum filelength of path+filename is 100 chars. * Example: "RAM:File1.123 RAM:File2.123 RAM:ENV/TIME" */ #define CF_ReturnCommand 408 /* Execute a command/door. * * Data1 * Data2 * Data3 * IOString <- The command to be executed. * * Note: To delete a previous ReturnCommand Request overwrite it with a * new request, or use "" to delete it really. */ #define CF_SetFlagFile 409 /* Add File to the Door own Flaglist !NOT IMPLEMENTED YET! * * Data1 * Data2 * Data3 * IOString */ #define CF_GetFlagFile 410 /* Get File from the Door own Flaglist !NOT IMPLEMENTED YET! * * Data1 * Data2 * Data3 * IOString */ #define CF_CallersLog 411 /* add a line of text to the callers.log * * Data1 * Data2 * Data3 * IOString <- The string added to the callers.log. */ #define CF_UDLog 412 /* add a line of text to the ud.log * * Data1 * Data2 * Data3 * IOString <- The string added to the ud.log. */ #define CF_DoorLog 413 /* add a line of text to the Door.log * * Data1 * Data2 * Data3 * IOString <- The string added to the Door.log. */ #define CF_CompType 414 /* Computertype change with build in selector * * Data1 <- Old or default computertype to load, 0 to let user select. * Data2 * Data3 * IOString */ #define CF_ModemType 415 /* Modemtype change with build in selector * * Data1 <- Old or default modemtype to load, 0 to let user select. * Data2 * Data3 * IOString */ #define CF_UnUsed1 416 #define CF_Language 417 /* SystemTextLanguage/TextLanguage (Suffix) changing with build in selector * * Data1 <- Old or default language to load, 0 to let user select. * Data2 * Data3 * IOString */ #define CF_NumLines 418 /* number of lines changing with build in selector * * Data1 <- 0 if selector should appear with prompt for numbers * or higer 0 to switch to the given value without prompt. * Data2 * Data3 * IOString */ #define CF_ShTxtSufLvlCyc 419 /* Shows a Textfile with full Suffix & Level & Cycle * * Data1 <- 1 means use suffix .txt only. 0 means use users sys language. * Data2 * Data3 * IOString <- The path where the files are located. * StringPtr <- The filename itself, without path! * IOString -> The complete filepath and name with cyclenumber and more... * * Example: IOString<-"BBS:Screens" StringPtr<-"Bull" Data1<-"1" * is trying to view a file with cycle. * IOString->"BBS:Screens/1-Bull.ger" can be the result. * If no cycle texts can be found the BBS tries to use: * "BBS:Screens/Bull.ger" if also no Bull.ger exists the BBS tries * to use "BBS:Screens/Bull.txt". */ #define CF_ShowTextSetable 420 /* Shows a Textfile free configurable * * Data1 <- 0 means don't cycle, else cycle. * Data2 <- 1 means use users language, 0 means u have to set the * suffix your self! * Data3 <- 1 means use suffix .txt only. 0 means use users sys language. * Only available if Data1 isn't 0! * IOString <- If Data1 isn't 0 IOString is the path where the files are * located, else IOString ist the full path+filename. * StringPtr <- The filename itself, without path! * Only available if Data1 isn't 0! * IOString -> The complete filepath and name (with cyclenumber and more...) * StructDummy1 <- "-1" means only users suffix will be added as suffix. * "-2" means .GR or if .GR not exists GR1 will be added * as suffix! This is used for Paragon Door texts. * If the value of StructDummy1 is higer than 0 (Atol()), * for example it's 10, than it will be used as the Level * like: Menu10.txt * If the value of StructDummy1 id 0 (Atol()), than the * next lower level text will be used * like: Menu300.txt or Menu255.txt. It counts down from * 1000 to 0, but not every single Level! Only in 5 steps. * Note: StructDummy1 is only available if Data2 is 1! */ #define CF_InternReturnCmd 421 /* Execute an internal command. * * Data1 * Data2 * Data3 * IOString <- The command to be executed. * * Note: To delete a previous ReturnCommand Request overwrite it with a * new request, or use "" to delete it really. */ #define CF_DoCallersLog 422 /* Write to any .log * * Data1 <- phase (type). * Data2 <- .log type. * Data3 * IOString <- The string added to the .log. * * Log types : * * 0 = Callers.log only. * 1 = UDLog * 2 = StartLog * 3 = UDLog * * Note: Callers.log will be written in ervery case! */ #define CF_SaveWherePhase 423 /* Save whereiam phase temporär. * * Data1 * Data2 * Data3 * IOString */ #define CF_RestWherePhase 424 /* Restore temporär saved whereiam phase. * * Data1 * Data2 * Data3 * IOString */ #define CF_FileCopyMove 425 /* Copy or move a file. * * Data1 <- if 0 then copy, else move file. * Data2 -> Returncode. If false then there was an error. * Data3 * IOString <- Source file. * StringPtr -> Destination file. */ #define CF_SysOpChat 426 /* Jump into SysOp-Chat. * * Data1 <- if 0 last line will be restored. * Data2 <- if TRUE shifted chat. * Data3 <- if TRUE no screen to front will be done, else it will. * IOString * StringPtr * * Note: Data1 indicates (if 0) that the last displayed string on screen * before the chat will be called is buffered and shall be re- * displayed after chatting. * Often useful for buffering input prompts. * * Note: Data2 emulates (if TRUE) a chat like with SHIFT-F1 called. * If FALSE it will be a chat like with F1 alone. * * Note: If the user is already in SysOp-Chat it's not possible to go * in chat again. It's only posible if no SysOp-Chat runs. * * If it was not possible to go into SysOp-Chat because the user * is already in chat the command will return with: * ReturnCode = 1 (Comand not successfull executed). */ #define CF_SpecialCmd 427 /* Execute a special door command (BBSCMD, SYSCMD or CONFCMD). * * Data1 <- Command type. * Data2 * Data3 * IOString <- The door command to be executed. * StringPtr <- The arguments for the door. * * Note: Data1 can have the following numbers: * * - If Data1 > 0 it's CONFCMD . * - If Data1 = -1 it's BBSCMD . * - If Data1 = -2 it's SYSCMD . */ #define CF_GetUserConfXS 428 /* Get a string containing the conference access of a special user. * * Data1 <- The usernumber of the user you want to get the conf xs from. * Data2 * Data3 * IOString * StringPtr -> A buffer filled with the conference access. * * Note: Check fdom_ReturnCode for a failure! * * Note: StringPtr will be an allocated buffer which will be freed from * MainPart if you door exists. * * Note: StringPtr contains the conference access of you user in the * following form: "X__X__X_X_"... The first char (byte 0) will be * Conference 1 the second (byte 1) Conference 2 and so on. * There is *NO* relative Conference here! They are physical from * 1 till the last Conference available. You have to check yourself * if the Conference is in the relative list if you need this. * For this you can use NR_GetRelativeStatus to see if relative * Conferences is activated and NR_AbsToRel to get the releative * number of an absolute (real/physical) one. * * Note: X means that the user has access to this Conference. * _ means that the user hasn't access to this Conference. * Please check always for X and not _ because X is the relevant one * and everything which is not X is _ and means no access. */ /* ------------------------- SR commands -------------------------------- */ #define SR_ConfName 600 /* Retrieve the conference name * * Data1 <- The conference number. * Data2 * Data3 * IOString -> The requested conferencename. * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define SR_ConfLocation 601 /* Retrieve the conference location * * Data1 <- The conference number. * Data2 * Data3 * IOString -> The requested conferencelocation. * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define SR_ConfNum 602 /* Retrieve the current conference number * * Data1 * Data2 -> The actual conferencenumber. * Data3 -> The relative conferencenumber. * IOString * * Note: Normaly if the relative conferencenumber is 0 the user has no access * to this conference, but this can't happen here. */ #define SR_BBSLocation 603 /* Retrieve the current BBS location * * Data1 * Data2 * Data3 * IOString -> The BBS Location. */ #define SR_Status 604 /* Retrieve the current status of the node * * Data1 * Data2 * Data3 * IOString -> Contains the status. */ #define SR_ScreenAdress 605 /* Retrieve the screen address * * Data1 * Data2 * Data3 * IOString -> Contains the hex screenadress. */ #define SR_TaskPri 606 /* Retrieve the priority the node is running at * * Data1 * Data2 -> Contains the Nodepriority. * Data3 * IOString */ #define SR_RawScreenAdress 607 /* Retrieve the screen address of the node * * Data1 * Data2 -> Contains the raw screenadress. * Data3 * IOString */ #define SR_FAMEVersion 608 /* Retrieve the current version string of FAME * * Data1 * Data2 -> Contains the versionnumber of FAME. * Data3 -> Contains the revsionnumber of FAME. * IOString -> Contains the versionstring of FAME. */ #define SR_ChatSet 609 /* Retrieve the chat status * * Data1 * Data2 -> Contains the Chat flag. * Data3 * IOString */ #define SR_ENVStat 610 /* Retrieve the current env stat variable code * * Data1 * Data2 -> Contains the env stat variable code. * Data3 * IOString */ #define SR_NodeDevice 611 /* Retrieve the node device name * * Data1 * Data2 * Data3 * IOString -> Contains the devicename. */ #define SR_NodeUnit 612 /* Retrieve the node unit number * * Data1 * Data2 -> Contains the unit number of the used device. * Data3 * IOString */ #define SR_NodeBaud 613 /* Retrieve the initialized baud rate of the node * * Data1 * Data2 -> Contains the initial baud rate of the node. * Data3 * IOString */ #define SR_NodeNumber 614 /* Retrieve the node nummber * * Data1 * Data2 -> Contains the nodenumber of this node. * Data3 * IOString */ #define SR_MCI 615 /* Send mci text to FAME * * Data1 <- If non zero a return will be done at the end. * Data2 -> The Returnvalue. 0 everything is ok, non zero means * there was an error. * Data3 * IOString <- The MCI-string to be interpreted. */ #define SR_GetTask 616 /* Finds the current nodes task address * * Data1 * Data2 * Data3 * IOString * StructDummy1 -> Is the (struct Process *) of this Node. */ #define SR_NodeBaudRate 617 /* Retrieve the current users connect rate * * Data1 * Data2 -> Contains the connect rate. * Data3 * IOString */ #define SR_LogonType 618 /* Retrieve the LOGONTYPE * * Data1 * Data2 -> Contains the logontype. * Data3 * IOString */ #define SR_ScrLeft 619 /* Retrieve the screen coordinates * * Data1 * Data2 -> Contains the screenleft. * Data3 * IOString */ #define SR_ScrTop 620 /* Retrieve the screen coordinates * * Data1 * Data2 -> Contains the screentop. * Data3 * IOString */ #define SR_ScrWidth 621 /* Retrieve the screen coordinates * * Data1 * Data2 -> Contains the screenwidth. * Data3 * IOString */ #define SR_ScrHeight 622 /* Retrieve the screen coordinates * * Data1 * Data2 -> Contains the screenheight. * Data3 * IOString */ #define SR_PurgeLine 623 /* Abort serial input * * Data1 * Data2 * Data3 * IOString * * No Data needed. */ #define SR_NonStopText 624 /* Retrieve the NONSTOP text scrolling flag * * Data1 * Data2 -> Contains the nonstop flag. * Data3 * IOString */ #define SR_GoodFile 625 /* Retrieve the results of a tested file after upload * * Data1 * Data2 -> Contains the filestatus. * Data3 * IOString */ #define SR_LastAccountNum 626 /* Retrieve the Last Account number * * Data1 * Data2 -> Contains the number of the last available account. * Data3 * IOString */ #define SR_PurgeLineStart 627 /* Begin serial input Abort * * Data1 * Data2 * Data3 * IOString * * No Data needed. */ #define SR_PurgeLineEnd 628 /* End serial input Abort * * Data1 * Data2 * Data3 * IOString * * No Data needed. */ #define SR_BBSOrigin 629 /* Retrieve the BBS Origin * * Data1 * Data2 * Data3 * IOString -> Contains the BBS Origin. */ #define SR_DefNumLines 630 /* Retrieve the default text number of lines * * Data1 * Data2 -> Contains the default text number of lines. * Data3 * IOString */ #define SR_NumberOfNodes 631 /* Retrieve the number of Nodes * * Data1 * Data2 -> Contains the number of Nodes. * Data3 * IOString */ #define SR_FileDescUndLine 632 /* Retrieve the File Decsription underline * * Data1 * Data2 * Data3 * IOString -> Contains the Decsription underline. */ #define SR_NumberOfConfs 633 /* Retrieve the number of Conferences * * Data1 * Data2 -> Contains the number of Conferences. * Data3 * IOString */ #define SR_ConfNameLoc 634 /* Retrieve the conference name and conference location * * Data1 <- The conference number. * Data2 * Data3 * IOString -> The requested conferencename. * StringPtr -> The requested conferencelocation. * StructDummy1 -> The requested conferencename. * StructDummy2 -> The requested conferencelocation. * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! * * Note: You have to allocate memory for StructDummy1 and StructDummy2. * For conferencename (StructDummy1) you need 32 bytes and for * conferencelocation (StructDummy2) you need 102 bytes of memory * (zero-bytes are already included). * The easyest way to do this is if you have two strings long enough * to which you can let point StructDummy1 and StructDummy1 before * you call this command. If you don't do this, you damage foreign * memory and this will normaly cause a guru. */ #define SR_FAMEDataFileVers 635 /* Retrieve the current Datafile version string of FAME * * Data1 * Data2 -> Contains the versionnumber used to check for fileheaders. * Data3 -> Contains the revsionnumber used to check for fileheaders. * IOString -> Contains the Datafile version string of FAME. */ #define SR_ConnectString 636 /* Retrieve the current users connect string * * Data1 * Data2 * Data3 * IOString -> Contains the connect string. */ /* ------------------------- SC commands -------------------------------- */ #define SC_UnUsed1 700 #define SC_UnUsed2 701 #define SC_ChatSet 702 /* Change the chat status * * Data1 <- 0 means no chat, else chat. * Data2 * Data3 * IOString */ #define SC_ENVStat 703 /* Change the current env stat variable code * * Data1 <- the new env stat variable code. * Data2 * Data3 * IOString */ #define SC_NonStopText 704 /* Change the NONSTOP text scrolling flag * * Data1 <- 0 means no NONSTOP text, else NONSTOP text. * Data2 * Data3 * IOString */ #define SC_DefNumLines 705 /* Change the default text number of lines * * Data1 <- The new default text number of lines. * Data2 * Data3 * IOString */ #define SC_FileDescUndLine 706 /* Change the File Decsription underline * * Data1 * Data2 * Data3 * IOString <- The new File Decsription underline (max. 45 chars). */ #define SC_GoodFile 707 /* Set the results of a tested file after upload * * Data1 <- The new filestatus. * Data2 * Data3 * IOString * * -1 means the file failed the filetest. * 0 means the file passed the filetest. * 1 means the file was not tested. */ /* ------------------------- AR commands -------------------------------- */ #define AR_GetKey 800 /* Look for a keypress without waiting for it * * Data1 * Data2 -> 0 means nothing happens, 1 means a key was pressed! * Data3 -> 0 = Console char, 1 = Serial char. * IOString * * Note: AR_GetKey is the same as NR_HotKey, but on NR_HotKey you will * get the char, while AR_GetKey notifies only that a char was * present. Usable for a simple "Press a key" prompt. */ #define AR_WaitRAWChar 801 /* Get a char with waiting for it, also get ALL REAL RAW commands! * * Data1 * Data2 -> The char typed be the user. * Data3 -> 0 = Console char, 1 = Serial char. * IOString <- String will be displayed to the user. * * Note: U have to check your self if the Rawkeycode is a FKey/Shift-FKey * or the Helpkey. If such a key appears, you have to use the next * command: AR_EmulateFKeyHelp */ #define AR_EmulateFKeyHelp 802 /* Emulates a pressed FKey/Shift-FKey/Help on Con * * Data1 <- Thy keytype. * Data2 * Data3 * IOString * * Note: Data1 can have the following values: * 1-10 means F1-F10, 11-20 means ShiftF1-ShiftF10, 21 means Help. * * Note: If ReturnCode is 1, the node is iconified and this command * won't be executed. This is because of more security, because * it's only an emulation of keys pressed by the SysOp and not for * other things. */ #define AR_GetCharHex 803 /* Retrieve the Char pressed in HEX !NOT IMPLEMENTED YET! * * Data1 * Data2 * Data3 * IOString */ #define AR_EditFile 804 /* Edit every File with the internal Texteditor * * Data1 * Data2 -> Returncode: 0 successful, -2 aborted by user. * Data3 * IOString <- The file to be edit. */ #define AR_Dump 805 /* dump the user's data structure to a specified file * * Data1 * Data2 * Data3 * IOString <- The file where the user data structure should be generated. */ #define AR_UserStatus 806 /* Retrieve the Userstatus (Aktiv/Deleted/InAktive) * * Data1 * Data2 -> The user status flag. * Data3 * IOString */ #define AR_NewScan 807 /* Retrieve the NewScan Flag * * Data1 <- The conferencenumber from which u want to get the NewScan flag. * Data2 -> 1 if NewScan is on, 0 if off. * Data3 * IOString * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define AR_Hacks 808 /* Retrieve the Hackattemps * * Data1 * Data2 -> Contains the User's number of hacks. * Data3 * IOString */ #define AR_LastConf 809 /* Retrieve the Last Conf which was joined * * Data1 * Data2 * Data3 -> Contains the User's last conference on. * IOString */ #define AR_ConfReJoin 810 /* Retrieve the Conf which should every time be joined on logon * * Data1 * Data2 * Data3 -> Contains the User's number of confjoins. * IOString */ #define AR_HighUpCPS 811 /* Retrieve the highest CPS on Uploads * * Data1 * Data2 -> Contains the User's highest CPS on Uploads. * Data3 * IOString */ #define AR_HighDownCPS 812 /* Retrieve the highest CPS on Downloads * * Data1 * Data2 -> Contains the User's highest CPS on Downloads. * Data3 * IOString */ #define AR_Baud 813 /* Retrieve the Baudrate at the last Logon * * Data1 * Data2 -> Contains the User's Baudrate at the last Logon. * Data3 * IOString */ #define AR_MsgCLS 814 /* Retrieve the ClearScreen on Msg's flag * * Data1 * Data2 -> Contains the User's ClearScreen on Msg's flag. * Data3 * IOString */ #define AR_FileCLS 815 /* Retrieve the ClearScreen on Filelists flag * * Data1 * Data2 -> Contains the User's ClearScreen on Filelists flag. * Data3 * IOString */ #define AR_UGlobal 816 /* Retrieve the global upload flag * * Data1 * Data2 -> Contains the User's global upload flag. * Data3 * IOString */ #define AR_DGlobal 817 /* Retrieve the global download flag * * Data1 * Data2 -> Contains the User's global download flag. * Data3 * IOString */ #define AR_FileBase 818 /* Retrieve the access to the User File Base * * Data1 * Data2 -> Contains the User's access to the User File Base. * Data3 * IOString */ #define AR_Hide 819 /* Retrieve the hide flag * * Data1 * Data2 -> Contains the User's hide flag. * Data3 * IOString */ #define AR_MsgRooming 820 /* Retrieve the Msgrooming flag * * Data1 * Data2 -> Contains the User's Msgrooming flag. * Data3 * IOString */ #define AR_StringEdit 821 /* Retrieve the StringEdit flag * * Data1 * Data2 -> Contains the User's StringEdit flag. * Data3 * IOString */ #define AR_CryptPW 822 /* Retrieve the CryptPW * * Data1 * Data2 * Data3 * IOString -> Contains the User's CryptPW. */ #define AR_CryptFlag 823 /* Retrieve the CryptFlag * * Data1 * Data2 -> Contains the User's Crypt flag. * Data3 * IOString */ #define AR_UserFileBPW 824 /* Retrieve the UserFileBasePW * * Data1 * Data2 * Data3 * IOString -> Contains the User's UserFileBasePW. */ #define AR_DropDTR 825 /* Drop carrier on a user * * Data1 * Data2 * Data3 * IOString * * No data needed. */ #define AR_Userlimit 826 /* Retrieve the Userlimit * * Data1 * Data2 * Data3 -> Contains the BBS Userlimit. * IOString */ #define AR_MaxNameFailure 827 /* Retrieve the MaxNameFailure * * Data1 * Data2 -> Contains the BBS MaxNameFailure. * Data3 * IOString */ #define AR_MaxUserPWFail 828 /* Retrieve the MaxUserPWFail * * Data1 * Data2 -> Contains the BBS MaxUserPWFail. * Data3 * IOString */ #define AR_MaxSysPWFailure 829 /* Retrieve the MaxSysPWFailure * * Data1 * Data2 -> Contains the BBS MaxSysPWFailure. * Data3 * IOString */ #define AR_MaxNUPFailure 830 /* Retrieve the MaxNUPFailure * * Data1 * Data2 -> Contains the BBS MaxNUPFailure. * Data3 * IOString */ #define AR_MaxUserHacks 831 /* Retrieve the MaxUserHacks * * Data1 * Data2 -> Contains the BBS MaxUserHacks. * Data3 * IOString */ #define AR_ScreensPath 832 /* Retrieve the ScreensPath * * Data1 * Data2 * Data3 * IOString -> Contains the BBS ScreensPath. */ #define AR_SysPWPrompt 833 /* Retrieve the SysPWPrompt * * Data1 * Data2 * Data3 * IOString -> Contains the BBS SysPWPrompt. */ #define AR_NewUserPWPrompt 834 /* Retrieve the NewUserPWPrompt * * Data1 * Data2 * Data3 * IOString -> Contains the BBS NewUserPWPrompt. */ #define AR_UserNamePrompt 835 /* Retrieve the UserNamePrompt * * Data1 * Data2 * Data3 * IOString -> Contains the BBS UserNamePrompt. */ #define AR_UserPWPrompt 836 /* Retrieve the UserPWPrompt * * Data1 * Data2 * Data3 * IOString -> Contains the BBS UserPWPrompt. */ #define AR_PausePrompt 837 /* Retrieve the PausePrompt * * Data1 * Data2 * Data3 * IOString -> Contains the BBS PausePrompt. */ #define AR_SysOpChatColor 838 /* Retrieve the SysOpChatColor * * Data1 * Data2 * Data3 * IOString -> Contains the BBS SysOpChatColor. */ #define AR_UserChatColor 839 /* Retrieve the UserChatColor * * Data1 * Data2 * Data3 * IOString -> Contains the BBS UserChatColor. */ #define AR_UploadPathI 840 /* Retrieve the UploadPathI * * Data1 * Data2 * Data3 * IOString -> Contains the UploadPathI of the actual conference. */ #define AR_DownloadPathI 841 /* Retrieve the DownloadPathI * * Data1 * Data2 * Data3 * IOString -> Contains the DownloadPathI of the actual conference. */ #define AR_AdditioUlPaths 842 /* Retrieve the AdditioUlPaths * * Data1 * Data2 * Data3 * IOString -> Contains the AdditioUlPaths of the actual conference. */ #define AR_AdditioDlPaths 843 /* Retrieve the AdditioDlPaths * * Data1 * Data2 * Data3 * IOString -> Contains the AdditioDlPaths of the actual conference. */ #define AR_NumberofDirs 844 /* Retrieve the NumberofDirs * * Data1 <- The conference number. * Data2 -> Contains the number of dirs of the actual conference. * Data3 * IOString * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define AR_GiveUlBytes 845 /* Retrieve the GiveUlBytes * * Data1 * Data2 -> Contains the number of Ul bytes given of the actual conference. * Data3 * IOString */ #define AR_GiveDlBytes 846 /* Retrieve the GiveDlBytes * * Data1 * Data2 -> Contains the number of Ul bytes given of the actual conference. * Data3 * IOString */ #define AR_FlagFilePath 847 /* Add a file on a Conffileflaglist with or without path * * Data1 <- The conference number. * Data2 <- FreeDl Flag. If non 0 it will be a FreeDownloadfile. * Data3 -> Errormsg 0 on success. * IOString <- The Filename * StringPtr <- The Path for the file, "" if no path is known and the BBS * should find a path for the file. * * Note: U can flag here also filenames longer than 12 chars. * Filenames can be long up to 31 chars. * The Filepath can be long up to 101 chars. * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! * * Note: Data3 is errormsg: * 0 means successfull flagged. * 1 means file allready flagged. * 2 means length of IOString is lower than byte. * -1 means list element memory allocation faild. * -2 means given conference not found, normaly not happens here, * because of Data1 check. */ #define AR_StringToNode 848 /* Send a Textstring to a Node (dependent of users settings "W 18") * * Data1 <- The Node to which the String should go. * Data2 * Data3 * IOString <- The String displayed at the Node. * * Note: If ReturnCode=1 the String can't be send to this Node, * because this Node doesn't exists. * Use NR_ActiveNode to check if the Node exists. * AR_StringToNode dependent of users settings "W 18", that means * only on some positions in the Node the Message can be directly * received. If the User don't want to get Messages at some actions * in the BBS, the Message will be added to a list which will be * displayed to the User when he comes to a position where he will or * must receive the messages. Every user *MUST* receive them on idle * mode (Menuprompt). */ #define AR_GetNodeEnv 849 /* Retrieve the status of a Node * * Data1 <- The Node u mean. * Data2 -> The status of the Node. Use this one to get a real result! * Data3 -> The full last Node to Server Command, better u doesn't use it! * IOString -> The Actionstring displayed at the Server. */ #define AR_FullEdStruct 850 /* Retrieve the (filled) struct for external MsgEd * * Data1 * Data2 * Data3 * IOString * StructDummy1 -> Pointer to struct ExternEditor. */ #define AR_SendStr 851 /* Sends a non length limited String to the User * * Data1 <- if not 0 a "\r\n" combination will be send after the string * has been send. * Data2 * Data3 * IOString * StringPtr <- The string to be send to the user. */ #define AR_SendStrCon 852 /* Sends a non length limited String to the Console only * * Data1 <- if not 0 a "\r\n" combination will be send after the string * has been send. * Data2 * Data3 * IOString * StringPtr <- The string to be send to the console. */ #define AR_SendStrSer 853 /* Sends a non length limited String to the Serial only * * Data1 <- if not 0 a "\r\n" combination will be send after the string * has been send. * Data2 * Data3 * IOString * StringPtr <- The string to be send to the serial. */ #define AR_ResetNumFlags 854 /* Reset NumFlagList * * Data1 * Data2 * Data3 -> Returncode. * IOString * * Note: Data3 must be true or an internal error has been detected. * In this case you musn't use AR_SetNumFlag and AR_GetNumFlag!!! */ #define AR_SetNumFlag 855 /* Flag an entry into the NumFlagList * * Data1 <- The number of the new entry. It's on you to count it correctly! * Data2 * Data3 -> Returncode. * IOString <- The entry (FileName). * * Note: Data3 is the following returncode: * 0 means success. * -1 means allocation failed. * -2 means Base not initialized. */ #define AR_GetNumFlag 856 /* Get an entry from the NumFlagList * * Data1 <- The number of the entry you want to have. * Data2 * Data3 -> Returncode. * IOString -> The entry (FileName). * * Note: Data3 is the following returncode: * 0 means success. * -1 means entry number not found. * -2 means Base not initialized. */ #define AR_NodeVersion 857 /* Get the version and revision numbers of a specific Node. * * Data1 <- The Node number * Data2 -> The version of this Node. * Data3 -> The revision of this Node. * IOString */ #define AR_NodeStartTime 858 /* Get the start time of a specific Node. * * Data1 <- The Node number * Data2 -> The start time/date (unix) of this Node. * Data3 * IOString -> The start time/date (string) of this Node. */ #define AR_ServerVersion 859 /* Get the version and revision numbers of the Server. * * Data1 * Data2 -> The version of the Server. * Data3 -> The revision of the Server. * IOString */ #define AR_ServerStartTime 860 /* Get the start time of the Server. * * Data1 * Data2 -> The start time/date (unix) of the Server. * Data3 * IOString -> The start time/date (string) of the Server. */ #define AR_HotKey 861 /* Gets a char without waiting for it, get also self definable cursor keys. * * Data1 <- Cursor key begining return code. (If 0 they begin with 2) * Data2 -> The char typed by the user. * Data3 -> 0 = Console char, 1 = Serial char. * IOString * * Note: AR_HotKey is the same as NR_HotKey, but like NR_WaitChar it * returns also cursor keys. Beware, the cursor key returns * are maybe others than with NR_WaitChar!!! * * Note: You get all ascii codes also RAW codes, but only the CSI codes and * escape-sequences will be filtered, because the BBS has to check for * FKeys and more. * You will get the cursorkeys as the following values: * Data1+2 for UP, Data1+3 for DOWN, Data1+1 for RIGHT and Data1 for LEFT. * * Defination: LEFT = 0 * RIGHT = 1 * UP = 3 * DOWN = 2 * * You now have to add the defines above to the returncode to see * if the result is a cursor key. * * If you specify that LEFT (first cursor key) begins with 160 * (set Data1 to 160) the cursorkeys will be the following ones: * * CURSOR LEFT = 160 * CURSOR RIGHT = 161 * CURSOR UP = 163 * CURSOR DOWN = 162 */ #define AR_DropDtrOnNode 862 /* Drop the carrier on a Node. * * Data1 <- The Node where the carrier shall be droped. * Data2 * Data3 * IOString */ #define AR_AwayMessage 863 /* Retrieve the actual Away Message. * * Data1 * Data2 * Data3 * IOString -> The actual Away Message. * StructDummy1 -> The struct aWAYmSG. * * Note: If IOString is empty (IOString[0] == '\0') then there is no * Away Message set yet. */ /* ------------------------- AC commands -------------------------------- */ #define AC_UserStatus 900 /* Cange the Userstatus (Aktiv/Deleted/InAktive) * * Data1 <- The new Userstatus. * Data2 * Data3 * IOString */ #define AC_NewScan 901 /* Change the NewScan Flag * * Data1 <- The conferencenumber from which u want to get the NewScan flag. * Data2 <- 1 if NewScan should be set to on, 0 for off. * Data2 * Data3 * IOString */ #define AC_HackCount 902 /* Resets the Hackcounter * * Data1 <- The new hackcounter. * Data2 * Data3 * IOString */ #define AC_LastConf 903 /* Change the Last Conf which was joined * * Data1 * Data2 * Data3 <- The new last conf joined. * IOString */ #define AC_ConfReJoin 904 /* Change the Conf which should every time be joined on logon * * Data1 * Data2 * Data3 <- The new last conf which should every time be joined on logon. * IOString */ #define AC_HighUpCPS 905 /* Change the highest CPS on Uploads * * Data1 <- The new highest CPS on Uploads. * Data2 * Data3 * IOString */ #define AC_HighDownCPS 906 /* Change the highest CPS on Downloads * * Data1 <- The new highest CPS on Downloads. * Data2 * Data3 * IOString */ #define AC_Baud 907 /* Change the Baudrate at the last Logon * * Data1 <- The new Baudrate at the last Logon. * Data2 * Data3 * IOString */ #define AC_MsgCLS 908 /* Change the ClearScreen on Msg's flag * * Data1 <- The new ClearScreen on Msg's flag. * Data2 * Data3 * IOString */ #define AC_FileCLS 909 /* Change the ClearScreen on Filelists flag * * Data1 <- The new ClearScreen on Filelists flag. * Data2 * Data3 * IOString */ #define AC_UGlobal 910 /* Change the global upload flag * * Data1 <- The new global upload flag. * Data2 * Data3 * IOString */ #define AC_DGlobal 911 /* Change the global download flag * * Data1 <- The new global download flag. * Data2 * Data3 * IOString */ #define AC_FileBase 912 /* Change the access to the User File Base * * Data1 <- The new access to the User File Base. * Data2 * Data3 * IOString */ #define AC_Hide 913 /* Change the hide flag * * Data1 <- The new hide flag. * Data2 * Data3 * IOString */ #define AC_MsgRooming 914 /* Change the Msgrooming flag * * Data1 <- The new Msgrooming flag. * Data2 * Data3 * IOString */ #define AC_StringEdit 915 /* Change the StringEdit flag * * Data1 <- The new StringEdit flag. * Data2 * Data3 * IOString */ #define AC_CryptPW 916 /* Change the CryptPW * * Data1 * Data2 * Data3 * IOString <- The new CryptPW (max 11 chars). */ #define AC_CryptFlag 917 /* Change the CryptFlag * * Data1 <- The new CryptFlag. * Data2 * Data3 * IOString */ #define AC_UserFileBPW 918 /* Change the UserFileBasePW * * Data1 * Data2 * Data3 * IOString <- The new UserFileBasePW. */ #define AC_Userlimit 919 /* Change the Userlimit * * Data1 * Data2 * Data3 <- The new BBS Userlimit. * IOString */ #define AC_MaxNameFailure 920 /* Change the MaxNameFailure * * Data1 <- The new BBS MaxNameFailure. * Data2 * Data3 * IOString */ #define AC_MaxUserPWFail 921 /* Change the MaxSysPWFailure * * Data1 <- The new BBS MaxSysPWFailure. * Data2 * Data3 * IOString */ #define AC_MaxSysPWFailure 922 /* Change the MaxNUPFailure * * Data1 <- The new BBS MaxNUPFailure. * Data2 * Data3 * IOString */ #define AC_MaxNUPFailure 923 /* Change the MaxNUPFailure * * Data1 <- The new BBS MaxNUPFailure. * Data2 * Data3 * IOString */ #define AC_MaxUserHacks 924 /* Change the MaxUserHacks * * Data1 <- The new BBS MaxUserHacks. * Data2 * Data3 * IOString */ #define AC_ScreensPath 925 /* Change the ScreensPath * * Data1 * Data2 * Data3 * IOString <- The new BBS ScreensPath. */ #define AC_SysPWPrompt 926 /* Change the SysPWPrompt * * Data1 * Data2 * Data3 * IOString <- The new BBS SysPWPrompt. */ #define AC_NewUserPWPrompt 927 /* Change the NewUserPWPrompt * * Data1 * Data2 * Data3 * IOString <- The new BBS NewUserPWPrompt. */ #define AC_UserNamePrompt 928 /* Change the UserNamePrompt * * Data1 * Data2 * Data3 * IOString <- The new BBS UserNamePrompt. */ #define AC_UserPWPrompt 929 /* Change the UserPWPrompt * * Data1 * Data2 * Data3 * IOString <- The new BBS UserPWPrompt. */ #define AC_PausePrompt 930 /* Change the PausePrompt * * Data1 * Data2 * Data3 * IOString <- The new BBS PausePrompt. */ #define AC_SysOpChatColor 931 /* Change the SysOpChatColor * * Data1 * Data2 * Data3 * IOString <- The new BBS SysOpChatColor. */ #define AC_UserChatColor 932 /* Change the UserChatColor * * Data1 * Data2 * Data3 * IOString <- The new BBS UserChatColor. */ #define AC_NumberofDirs 933 /* Change the NumberofDirs * * Data1 <- The new BBS NumberofDirs. * Data2 * Data3 * IOString */ #define AC_GiveUlBytes 934 /* Change the GiveUlBytes * * Data1 <- The new BBS givven Ul bytes. * Data2 * Data3 * IOString */ #define AC_GiveDlBytes 935 /* Change the GiveDlBytes * * Data1 <- The new BBS given Dl bytes. * Data2 * Data3 * IOString */ #define AC_ServerAction 936 /* Write action string to the server nodeline. * * Data1 * Data2 * Data3 * IOString <- The string to the server. */ #define AC_ServerActionCPS 937 /* Write action string and Baud/CPS to the server nodeline. * * Data1 <- The Baud/CPS to the server. * Data2 * Data3 * IOString <- The string to the server. */ #define AC_AwayMessage 938 /* Change the actual Away Message. * * Data1 * Data2 * Data3 * IOString <- The new Away Message. */ /* ------------------------- RD commands -------------------------------- */ #define RD_ShowFlags 1000 /* Shows the Flaglist of the current Conf !NOT IMPLEMENTED YET! * * Data1 * Data2 * Data3 * IOString */ #define RD_ShowAllFlags 1001 /* Shows the Flaglists of all Conf's !NOT IMPLEMENTED YET! * * Data1 * Data2 * Data3 * IOString */ #define RD_ConfigLoad 1002 /* Reload all Configdatas !NOT IMPLEMENTED YET! * * Data1 * Data2 * Data3 * IOString */ #define RD_IconifyIs 1003 /* Retrieve Iconify Status * * Data1 * Data2 -> The iconify status flag. * Data3 * IOString */ #define RD_Iconify 1004 /* Change to Iconify or UnIconify * * Data1 * Data2 * Data3 * IOString * * No datas needed, because this only toggles. */ #define RD_Spy 1005 /* Retrieve or toggles the Spy flag !NOT IMPLEMENTED YET! * * Data1 * Data2 * Data3 * IOString */ #define RD_NewUser 1006 /* Retrieve or toggles the NewUser flag * * Data1 <- On 0 retrieve, else set the NewUser flag. * Data2 -> If Data1=0 the NewUser flag. * Data3 <- If Data1=1 the new NewUser flag. * IOString */ #define RD_LoadAccount 1007 /* Load Userdatas * * Data1 <- The usernumber of the user you want to load. * Data2 -> An internal error code. * Data3 * IOString * StructDummy1 -> The Userdata structure. * StructDummy2 -> The Userkey structure. */ #define RD_SaveAccount 1008 /* Write Userdatas back * * Data1 <- The usernumber of the user you want to save. * Data2 * Data3 * IOString * StructDummy1 <- The Userdata structure. * StructDummy2 <- The Userkey structure. */ #define RD_LoadConfDat 1009 /* Write UserCnf.data back * * Data1 <- The usernumber of the user from whom you want to load the aktual * conf's Userconfdata structure. * Data2 <- The selected conference. * Data3 * IOString * StructDummy1 -> The Userconfdata structure. * * Note: If Data2 is lower than 1 or higher than the last conference * available, Data2 will be set to the current conference number! */ #define RD_SaveConfDat 1010 /* Load UserCnf.data * * Data1 <- The usernumber of the user to whom you want to save the aktual * conf's Userconfdata structure. * Data2 <- The selected conference. * Data3 * IOString * StructDummy1 <- The Userconfdata structure. * * Note: If Data2 is lower than 1 or higher than the last conference * available, Data2 will be set to the current conference number! */ #define RD_AppendAccount 1011 /* Add a new Account * * Data1 * Data2 * Data3 * IOString * StructDummy1 <- The filled Userdata structure. * StructDummy2 <- The filled Userkey structure. * * Note: The Userconfdata structures will be generated automaticly and set to * default values. */ #define RD_DoOnMaxUserHack 1012 /* Not used now * * Data1 * Data2 * Data3 * IOString */ #define RD_ServerCommand 1013 /* Send ACP command * * Data1 <- Data1 of the Server Msg. * Data2 <- Data2 of the Server Msg. * Data3 * IOString <- String (if needed) for a command. */ #define RD_GetMciFlag 1014 /* Retrieve the MCI Flag !NOT IMPLEMENTED YET! * * Data1 * Data2 * Data3 * IOString */ #define RD_MciFlag 1015 /* Change the MCI Flag !NOT IMPLEMENTED YET! * * Data1 * Data2 * Data3 * IOString */ #define RD_LoadAccountMisc 1016 /* Load Miscdatas * * Data1 <- The usernumber of the user you want to load. * Data2 <- The selected conference. * Data3 -> An internal error code. * IOString * StructDummy1 -> The Userdata structure. * StructDummy2 -> The Userdata structure. * StructDummy3 -> The Userconfdata structure. * * Note: If Data2 is lower than 1 or higher than the last conference * available, Data2 will be set to the current conference number! */ #define RD_SaveAccountMisc 1017 /* Write Miscdatas back * * Data1 <- The usernumber of the user you want to save. * Data2 <- The selected conference. * Data3 * IOString * StructDummy1 <- The Userdata structure. * StructDummy2 <- The Userdata structure. * StructDummy3 <- The Userconfdata structure. * * Note: If Data2 is lower than 1 or higher than the last conference * available, Data2 will be set to the current conference number! */ #define RD_ASLLocalUlPath 1018 /* Retrieve or change ASLLocalUlPath * * Data1 <- 0 means retrieve, else change ASLLocalUlPath. * Data2 * Data3 * IOString <-> If Data1=0 it contains ASLLocalUlPath, * else this will be the new one (max 21 chars). */ #define RD_ASLTextViewPath 1019 /* Retrieve or change ASLTextViewPath * * Data1 <- 0 means retrieve, else change ASLTextViewPath. * Data2 * Data3 * IOString <-> If Data1=0 it contains ASLTextViewPath, * else this will be the new one (max 21 chars). */ #define RD_ASLSendFilePath 1020 /* Retrieve or change ASLSendFilePath * * Data1 <- 0 means retrieve, else change ASLSendFilePath. * Data2 * Data3 * IOString <-> If Data1=0 it contains ASLSendFilePath, * else this will be the new one (max 21 chars). */ #define RD_StartNodeCmd 1021 /* Start a command (Menu/Door) at another Node * * Data1 <- The Node u mean. * Data2 * Data3 * IOString <- The command incl. Arguments. */ #define RD_BeADoorOnNode 1022 /* Let us be a Door of another Node. This means in detail, this command * emulates on the given Node that you are a Door started on this Node. * The Node opens, if not exists, the own FAMEDoorPort(x). * Now you can access this port like a normal Door (which you already are) * like as you has been started from there. This also means you *HAVE* * to use the Mustcommands: MC_DoorStart and MC_ShutDown !!! * * Data1 <- The Node you mean. * Data2 * Data3 * IOString <- Arguments given on doorstart (only a joke 8)...but true!) */ #define RD_OpenDoorPort 1023 /* Opens a DoorPort an a Node * * Data1 <- The Node u mean. * Data2 <- The DoorPorttype. * Data3 * IOString * * DoorPorttype: 0 FIM, 1 XIM, 2 TIM. */ #define RD_CloseDoorPort 1024 /* Closes a DoorPort an a Node * * Data1 <- The Node u mean. * Data2 <- The DoorPorttype. * Data3 * IOString * * DoorPorttype: 0 FIM, 1 XIM, 2 TIM. */ #define RD_GetServerList 1025 /* Get the internal Serverliststamm * * Data1 * Data2 * Data3 * IOString * StructDummy1 -> The internal Serverliststamm (struct NodeListStamm). */ #define RD_StringToNode 1026 /* Send a Textstring to a Node * * Data1 <- The Node to which the String should go. * Data2 * Data3 * IOString <- The String displayed at the Node. * * Note: If ReturnCode=1 the String can't be send to this Node. * Maybe the Node doesn't exists. * Use NR_ActiveNode to check if the Node exists and AR_GetNodeEnv * to retrieve the status of the node. The best way is to use the * internal ServerNodelist. * This String appears on every position/action on the Node. * */ #define RD_StringToNodes 1027 /* Send a Textstring to a list of Nodes * * Data1 * Data2 * Data3 * IOString <- The String displayed at the Nodes. * StructDummy1 <- The list of Nodes from type struct FAMEDestNodes. * * Note: Use NR_ActiveNode to check if the Nodes exist and AR_GetNodeEnv * to retrieve the status of the nodes. The best way is to use the * internal ServerNodelist. * This String appears on every position/action on the Node. * */ #define RD_CONStatus 1028 /* Get or set the CON Output flag * * Data1 <- 1 means set, else get. * Data2 <-> On Data1 you set this value, else u will get it. * Data3 * IOString */ #define RD_SERStatus 1029 /* Get or set the SER Output flag * * Data1 <- 1 means set, else get. * Data2 <-> On Data1 you set this value, else u will get it. * Data3 * IOString */ #define RD_SaveMsgFile 1030 /* Save a Msg from * * Data1 <- Post to Conference. * Data2 -> Result. * Data3 <- File to message flag. * IOString <- File and path. * StructDummy1 <- Allocated and filled struct MailHeader * StringPtr <- File or directory contends to message. * * Results are: 0 = Successfull. * 1 = Your given file doesn't exists. * 2 = Can't get conference datas from your given conf number. * 3 = MsgBase lock failed. * 4 = MsgStatus.dat can't be opened. * 5 = MsgHeader.dat can't be opened. * 6 = Filecopy of message failed. * 7 = Your struct MailHeader isn't valid. * * Data3 file to message flags: 0 - Nothing to attach. * 1 - One single file to attach. * 2 - All files of a directory to attach. * * Note: Minimum filled elements in struct MailHeader: * - fmah_ToName * - fmah_FromName * - fmah_Subject * - fmah_MsgStatus <- *MUST* be set to TRUE! * - fmah_Private * * Note: If StringPtr is a valid path to a file it will be copied to * the mail and a flag in the struct MailHeader will be set * to mark that there is a attached file. */ #define RD_SaveMsgList 1031 /* * * Data1 <- Post to Conference. * Data2 * Data3 * IOString * StructDummy1 <- Filled struct ExternEditor. * * Note: Get the pointer to struct ExternEditor with AR_FullEdStruct! * Also call RD_FreeMsgListFEd before AR_FullEdStruct and get sure * that no msg is on writing on the node till you use this !!! */ #define RD_FreeMsgListFEd 1032 /* * * Data1 * Data2 * Data3 * IOString * * Note: Free the Internal Msglist. No data needed. */ #define RD_ActASLULPath 1033 /* Retrieve or change Actual ASL Upload Path * * Data1 <- 0 means retrieve, else change ActASLULPath. * Data2 * Data3 * IOString <-> If Data1=0 it contains ActASLULPath, * else this will be the new one (max 100 chars). */ #define RD_ActASLTextViewP 1034 /* Retrieve or change Actual ASL TextView Path * * Data1 <- 0 means retrieve, else change ActASLTextViewPath. * Data2 * Data3 * IOString <-> If Data1=0 it contains ActASLTextViewPath, * else this will be the new one (max 100 chars). */ #define RD_ActASLDlPath 1035 /* Retrieve or change Actual ASL Download Path * * Data1 <- 0 means retrieve, else change ActASLDlPath. * Data2 * Data3 * IOString <-> If Data1=0 it contains ActASLDlPath, * else this will be the new one (max 100 chars). */ #define RD_NodeScrToFront 1036 /* Brings Node Screen to Front * * Data1 * Data2 * Data3 * IOString * * No datas needed. * If the screen is iconified, it will be uniconified. */ #define RD_SetServerActCol 1037 /* Change display colour at the Serveraction * * Data1 <- Colour * Data2 <- Node * Data3 * IOString */ #define RD_InitNumFlag 1038 /* Initialize your own NumFlagList * * Data1 * Data2 * Data3 * IOString * StructDummy1 <- Your own not initilized struct NumFlagList NumFlagListBase * pointer. * * Note: Don't forget to set your NumFlagListBase=NULL; * * Note: If StructDummy1 is FALSE an internal error has been detected. * In this case you musn't use RD_RemoveNumFlag, RD_ResetNumFlags, * RD_SetNumFlag and RD_GetNumFlag!!! * * Here now the struct NumFlagList: * * struct NumFlagList { * struct NumFlagList *Next, * *Prev; * char FileName[102]; * long FileNumber; * }; * * Note: You can have as many NumFlagListBases as you want to! * There is no limit on FAME side. * Your only thing to do is to take another NumFlagListBase * like here: * * struct NumFlagList *NumFlagListBase1, * *NumFlagListBase2, * *NumFlagListBase3; * * So you easily can have as many simple lists as you want to have. * Normaly such a list is often usable. FAME MainPart uses * 8 of them. One for restricted file checkings, one for the * NamesNotAllowed list, one for the NodeToNode comunications, * one for the FlagFromFile/Number function of the menu command "A", * one for file transfering, one for fileskippings, one for * ASL-Requester lists and one for the additional download paths list. * Every of theese 8 different bases needs only only 4 bytes, because * it's just a pointer! Use lists whereever you can! For this reason * i give you those simple list functions, if you don't know how to do * this, also it saves multiple list handling functions. * In future i will give you more komplex list functions, like the * list functions of the internal lineeditor, there are additional * functions for insert, sorting and many more. * If you write own lists in your doors, think about the usage * of the FAME.library internal memory pool functions, which are * compatible to the original AmigaOS3.x pool functions! */ #define RD_RemoveNumFlag 1039 /* Remove your own NumFlagList * * Data1 * Data2 * Data3 * IOString * StructDummy1 <- Your own initilized struct NumFlagList NumFlagListBase * pointer. * * Note: Don't forget to set your NumFlagListBase=NULL; if you use it agin * with RD_InitNumFlag! */ #define RD_ResetNumFlags 1040 /* Reset your own NumFlagList * * Data1 * Data2 * Data3 * IOString * StructDummy1 <- Your own initilized struct NumFlagList NumFlagListBase * pointer. * * Note: This is the combination of RD_RemoveNumFlag and RD_InitNumFlag. * * Note: If StructDummy1 is FALSE an internal error has been detected. * In this case you musn't use RD_RemoveNumFlag, RD_ResetNumFlags, * RD_SetNumFlag and RD_GetNumFlag!!! */ #define RD_SetNumFlag 1041 /* Flag an entry into your own NumFlagList * * Data1 <- The number of the new entry. It's on you to count it correctly! * Data2 * Data3 -> Returncode. * IOString <- The entry (FileName). * StructDummy1 <- Your own initilized struct NumFlagList NumFlagListBase * pointer. * * Note: Data3 is the following returncode: * 0 means success. * -1 means allocation failed. * -2 means Base not initialized. */ #define RD_GetNumFlag 1042 /* Get an entry from your own NumFlagList * * Data1 <- The number of the entry you want to have. * Data2 * Data3 -> Returncode. * IOString -> The entry (FileName). * StructDummy1 <- Your own initilized struct NumFlagList NumFlagListBase * pointer. * * Note: Data3 is the following returncode: * 0 means success. * -1 means entry number not found. * -2 means Base not initialized. */ #define RD_GetUserDataLoc 1043 /* Get the user datas location path * * Data1 * Data2 * Data3 * IOString -> 'User.data' name * StringPtr -> Locationpath of all user datas. */ #define RD_ConfName 1044 /* Change the conference name * * Data1 <- The conference number. * Data2 * Data3 * IOString <- The new conference name. * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define RD_ConfLocation 1045 /* Change the conference location * * Data1 <- The conference number. * Data2 * Data3 * IOString <- The new conference location. * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define RD_FGetNextConf 1046 /* Update your conf pointer to the next available conference * * Data1 * Data2 -> The new conference number. If relative is on, this value is * also relative, else it's the real conference number. * Data3 * IOString * StructDummy1 <-> Your struct ConfList pointer. * * Note: If no next conference is available for the user, this pointer * leaves unchanged, else it will be set to the new conference pointer. * Note: If Data2 has a negative value no next conference is available * for the user. * * Note: I've said above your pointer leaves unchanged in some cases. * This is true, but not if your pointer was NULL. If your pointer * was NULL it now will be the first available conference of the user. */ #define RD_FGetPrevConf 1047 /* Update your conf pointer to the previous available conference * * Data1 * Data2 -> The new conference number. If relative is on, this value is * also relative, else it's the real conference number. * Data3 * IOString * StructDummy1 <-> Your struct ConfList pointer. * * Note: If no previous conference is available for the user, this pointer * leaves unchanged, else it will be set to the new conference pointer. * Note: If Data2 has a negative value no previous conference is available * for the user. * * Note: I've said above your pointer leaves unchanged in some cases. * This is true, but not if your pointer was NULL. If your pointer * was NULL it now will be the first available conference of the user. */ #define RD_FGetConfNum 1048 /* Get a pointer to a given conference (relative) * * Data1 <- The conference number from which you want to get the ptr. * Data2 -> The new conference number. If relative is on, this value is * also relative, else it's the real conference number. * Data3 * IOString * StructDummy1 -> Your new struct ConfList pointer. * * Note: This function checks for relative flag, if relative is on, the * number used for conference search (Data1) is handled as relative * conference number, else it's used to search for a real conference * number. * Note: If Data2 is -2 your given conference number is not available. * If Data2 is -3 your given conference number is available, but * the user has no access to this conference. * * Note: Your pointer leaves normaly unchanged if Data2 is -3, but not if * your pointer was NULL. If your pointer was NULL it now will be the * first available conference of the user. * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define RD_FGetRealConfNum 1049 /* Get a pointer to a given conference (not relative) * * Data1 <- The conference number from which you want to get the ptr. * Data2 -> The new conference number, it's ever real! * Data3 * IOString * StructDummy1 -> Your new struct ConfList pointer. * * Note: If Data2 is negative your given conference number is not available. * * Note: Your pointer leaves normaly unchanged if Data2 is negative, but not * if your pointer was NULL. If your pointer was NULL it now will be * the first available conference of the user. * * Note: If Data1 is lower than 1 or higher than the last conference * available, Data1 will be set to the current conference number! */ #define RD_FGetConfBase 1050 /* Get the conference base pointer. * * Data1 * Data2 * Data3 * IOString * StructDummy1 -> The conference base pointer. * * Note: You can only use the element RelativeNext to get the first * available conference of the user. * * Example: * * struct ConfList *MyConfPtr = DoorMsg -> StructDummy1 -> RelativeNext; * * while(MyConfPtr) * { * ... * ... * MyConfPtr = MyConfPtr -> RelativeNext; * } */ #define RD_FGetAktConf 1051 /* Get the current conference pointer. * * Data1 * Data2 * Data3 * IOString * StructDummy1 -> The current conference pointer. * * Note: You can use this pointer to check for following conferences * (RD_FGetNextConf) or previous conferences (RD_FGetPrevConf). * * Example: * * while(DoorMsg -> StructDummy1) * { * ... * ... * DoorMsg -> StructDummy1 = DoorMsg -> StructDummy1 -> RelativeNext; * } */ #define RD_GiveNumFromConf 1052 /* Get the relative/non relative number from a conference pointer. * * Data1 * Data2 -> The conference number. If relative is on, this value is * also relative, else it's the real conference number. * Data3 * IOString * StructDummy1 <- Your struct ConfList pointer. */ #define RD_SaveUFlagList 1053 /* Forbid upload procedure to clear the upload flag list after transfer * * Data1 <- 0 = clear, else don't clear. * Data2 * Data3 * IOString * * Note: If Data1 is non zero from now on the upload procedure won't any * longer clear the flag list of uploaded files and the door can use it * else if Data1 is zero you tell the upload procedure it now can * clear it again. * Normaly the upload procedure clears after finished filechecking * and fileid procedure at last this list to free the memory to * the system. But it's not realy a must, because if the next * upload is started this list will be cleared also before the * real transfer begins. It's a question of memory usage. It's * better to clear it after upload, because we don't know how * may files are in the list and when the next upload will be * started. * If a door want's to know which files were uploaded after * upload procedure it's needed to get this list. To get a filled * list we must use RD_SaveUFlagList with Data1 = TRUE. * Then we can get the base pointer to this list with RD_GetUFlagList. * After we have finished reading from this list, beware it's read * only!!!, we should use RD_ClearUFlagList to clear the list now. * If our door no longer needs information of the list, because * no more upload procedures will be started we should use * RD_SaveUFlagList again with Data1 = FALSE (0) to set the * upload procedure to the origin state. It's not realy bad if you * forget this, because if your door shuts down this flag will be set * automaticly back. */ #define RD_ClearUFlagList 1054 /* Clear the upload flag list now * * Data1 * Data2 * Data3 * IOString */ #define RD_GetUFlagList 1055 /* Retrieve the basis of the upload flag list * * Data1 * Data2 * Data3 * IOString * StructDummy1 -> The basis pointer of the upload flag list. */ #define RD_GetMailHeader 1056 /* Retrieve the MailHeader pointer (SYSCMD: MAILHEADER) * * Data1 * Data2 * Data3 * IOString * StructDummy1 -> The MailHeader pointer. */ #define RD_ShowMailHeader 1057 /* Inform the Node to show MailHeader (SYSCMD: MAILHEADER) * * Data1 <- True to show MailHeader, false not. * Data2 * Data3 * IOString */ #define RD_GetDldFileStamm 1058 /* Retreive the DldFilesStamm list root pointer. * * Data1 * Data2 * Data3 * IOString * StructDummy1 -> The struct NumFlagList *DldFilesStamm pointer. * * Note: Use RD_GetDldFileStamm to retreive the beginning of the downloaded * file list. In this list you will find all files downloaded by * the currently online user of the last download if there was one * this time. DldFilesStamm is empty if no download has been done yet. * DldFilesStamm will be reinitialized if the user starts a new * download or the user logges off. * * Note: After using RD_RIDldFileStamm you have to use RD_GetDldFileStamm * again if you want to continue work with the DldFilesStamm pointer! */ #define RD_RIDldFileStamm 1059 /* Reinitialize the DldFilesStamm list. * * Data1 * Data2 * Data3 * IOString * * Note: RD_RIDldFileStamm reinitializes the DldFilesStamm you will get * with RD_GetDldFileStamm. This means all list entries will be freed * and the list pointer reinitialized. * * Note: After using RD_RIDldFileStamm you have to use RD_GetDldFileStamm * again if you want to work with the DldFilesStamm pointer! */ #define RD_PutDldFileStamm 1060 /* Add a file to the DldFilesStamm list. * * Data1 <- The Conference number depending to the file. * Data2 * Data3 * IOString <- The filename. * * Note: The filed FileNumber of the struct NumFlagList will be used for * the Conference number. This number indicates the Conference * (real/physical number) where the file has been downloaded from. * If you don't know the Conference number set it to 0 as default. */ /* ###################### COMMAND DEFINES END ########################### */ #endif /* FAME_FAMEDOORCOMMANDS_H */