Short:    scan DEVS:Monitors/#? for tooltypes, 40.375
Kurz:     sucht DEVS:Monitors/#?.info tooltypes, 40.375
Author:   Thomas Krafzik
Requires: OS 3.0 or higher

DISCLAIMER:
------------------------------------------------------------------------
This is FREEWARE.
Distribution on Aminet or Aminet-CD's is always OK.
Distribution by Fred Fish is always OK.
Distribution on MeetingPearlsCD's is always OK.
Other commercial distribution without written permission from me
is strictly forbidden.
Distribution is only allowed if the archive is left untouched.
If you are a rascist or a fascist or have other racial prejudices,
you are NOT allowed to use this program, of course.
------------------------------------------------------------------------

MIPrefs is copyright 1995-97 by Thomas Krafzik.


Hello,
this is a support program for MonSpecsMUI.
It scans entire DEVS:Monitors/ directory for .info files which contain
tooltypes saved with MonSpecsMUI and set these parameters system wide.

The format of these tooltypes is:

HSSTRT=0x<HexID>      ; hsync start
HSSTOP=0x<HexID>      ; hsync stop
VSSTRT=0x<HexID>      ; vsync start
VSSTOP=0x<HexID>      ; vsync stop
MAXCOL=0x<HexID>      ; DeniseMaxDisplayColumn

REFMODEID=0x<HexID>   ; reference modeid for the following overscans
NOMMINX=<Integer>     ; minimum nominal overscan x value
NOMMAXX=<Integer>     ; maximum nominal overscan x value
NOMMINY=<Integer>     ; minimum nominal overscan x value
NOMMAXY=<Integer>     ; maximum nominal overscan x value
MAXMINX=<Integer>     ; minimum maximal overscan x value
MAXMAXX=<Integer>     ; maximum maximal overscan x value
MAXMINY=<Integer>     ; minimum maximal overscan x value
MAXMAXY=<Integer>     ; maximum maximal overscan x value
VIDEOMINX=<Integer>   ; minimum video overscan x value
VIDEOMAXX=<Integer>   ; maximum video overscan x value
VIDEOMINY=<Integer>   ; minimum video overscan x value
VIDEOMAXY=<Integer>   ; maximum video overscan x value

MODEID0=0x<HexID>     ; modeid for the following tooltypes
VPRMINX0=<Integer>    ; minimum ViewPositionRange x value
VPRMAXX0=<Integer>    ; maximum ViewPositionRange x value
VPRMINY0=<Integer>    ; minimum ViewPositionRange y value
VPRMAXY0=<Integer>    ; maximum ViewPositionRange y value
VPOSX0=<Integer>      ; ViewPosition x value
VPOSY0=<Integer>      ; ViewPosition y value
MODENAME0=<String>    ; modename for this modeid
PROPERTIES0=0x<Hex>   ; props for this modeid

MODEID1=...
NOMMINX1=...
and so on

START THIS PROGRAM ONLY AFTER THE MONITOR DRIVERS ARE STARTED.

Standard call:
MIPrefs                ; user-startup

If you encounter that this program doesn't work for you, try to
call SYS:Prefs/Overscan after it:
MIPrefs                ; user-startup
SYS:Prefs/Overscan USE ; user-startup

or call it twice (first before IPrefs, second after IPrefs)
like this: (NOT RECOMMENDED)
; not recommended, try second method first
MIPrefs                ; startup-sequence
IPrefs                 ; startup-sequence
MIPrefs                ; user-startup


My Address:

Thomas Krafzik
Belforter Str. 20
45884 Gelsenkirchen
Germany

Phone: (+49)209 12386 (international)
           0209 12386 (german)

EMail:  pizza@focus.ruhr.de

If you have any questions you can contact me by phone or snail mail.
If you send mail and expect an answer, include return postage also.
(AIRmail to USA costs 3DM (2 US-$))
EMail is preferred.

Thank you.