% \iffalse meta-comment
%
% Copyright 1993-1995 the LaTeX3 project and any individual authors
% listed elsewhere in this file.  All rights reserved.
% 
% For further copyright information see the file legal.txt, and any
% other copyright notices in this file.
% 
% This file is part of the LaTeX2e system.
% ----------------------------------------
%   This system is distributed in the hope that it will be useful,
%   but WITHOUT ANY WARRANTY; without even the implied warranty of
%   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
% 
%   For error reports concerning UNCHANGED versions of this file no more
%   than one year old, see bugs.txt.
% 
%   Please do not request updates from us directly.  Primary
%   distribution is through the CTAN archives.
% 
% 
% IMPORTANT COPYRIGHT NOTICE:
% 
% You are NOT ALLOWED to distribute this file alone.
% 
% You are allowed to distribute this file under the condition that it is
% distributed together with all the files listed in manifest.txt.
% 
% If you receive only some of these files from someone, complain!
% 
% Permission is granted to copy this file to another file with a clearly
% different name and to customize the declarations in that copy to serve
% the needs of your installation, provided that you comply with
% the conditions in the file legal.txt.
% 
% However, NO PERMISSION is granted to produce or to distribute a
% modified version of this file under its original name.
%  
% You are NOT ALLOWED to change this file.
% 
% 
% \fi
\documentclass[a4paper]{article}

% Commands and environments:

\newcommand \eg {e.g.~}
\newcommand \ie {i.e.~}


\newenvironment{citations}{%
   \list{}{%
      \renewcommand{\makelabel}[1]{\normalfont\itshape ##1}%
   }%
}{%
   \endlist
}

% Some logos:

\newcommand\NFSS {NFSS}
\newcommand\LaTeXNews {\LaTeX~News}
\newcommand\AW {Addison Wesley}
\newcommand\SGML {{\sc SGML}}
\newcommand\DSSSL {{\sc DSSSL}}
\newcommand\PS {{\sc Post\-Script}}

\newcommand\AmSTeX{$\mathcal A$\lower.4ex\hbox{$\!\mathcal
                                                  M\!$}$\mathcal S$-\TeX}
\newcommand\AmSLaTeX{$\mathcal A$\lower.4ex\hbox{$\!\mathcal
                                                    M\!$}$\mathcal S$-\LaTeX}
\newcommand\MF{{\sc Meta\-font}}

% sections

\setcounter{secnumdepth}{-2}

% Front matter:

\title{\Large The \LaTeX3 Project}

\date{\copyright 1995 \ 
Frank Mittelbach and
Chris Rowley}

\begin{document}

\thispagestyle{empty}

\maketitle

\section{Outline}
   This project has been established to produce a new
version of \LaTeX{}, the widely-used and highly-acclaimed
document preparation system.
The new system will greatly increase the range of documents which can
be processed and will provide a flexible interface for typographic
designers to easily specify the formatting of a class of documents.
 
The \LaTeX3 Project Team is a small group of volunteers whose aim is
to produce this major new document processing system based on the
principles pioneered by Leslie Lamport in the current \LaTeX.

The major work of the team during 1994 was the release and maintenance
of the new standard version of \LaTeX{}: the one you have just
acquired.
They will continue to maintain this system, releasing updated
versions every six months and recording these activities in the \LaTeX{}
bugs database (see below).

\section{The \LaTeX3 Project Fund}

Although \LaTeX{} may be distributed freely, the production and
maintenance of the system does require expenditure of reasonably large
sums of money.  No fund money goes towards salaries but there are many
necessities that do need financing: examples are new, or enhanced,
computing equipment and travel to team meetings (the volunteers come
from many different countries, so getting together occasionally is a
non-trivial exercise).

This is why we are appealing to you for contributions to the fund.
Any sum will be much appreciated; the amount need not be large, small
contributions add up to very useful amounts.  Contributions of
suitable equipment and software will also be of great value.

We are also asking commercial organisations to assess the benefits
they gain from using, or distributing, a well-supported \LaTeX{} and
to make appropriate contributions to the fund in order that we can
continue to maintain and improve the product.  If you work for, or do
business with, such an
organisation, please bring to the attention of the relevant people the
existence and needs of the project.

Contributions, or enquiries, should be sent to one of the following
addresses:

\begin{quote}
  \TeX{} Users Group, PO Box 869, Santa Barbara, CA~93102, USA\\
   Fax:~+1~805~963~8358 \ 
   EMail: \texttt{tug@tug.org}

  UK TUG, 1 Eymore Close, Selly Oak, Birmingham B29~4LB, UK\\
  Fax: +44 121 476 2159 \ Email: \texttt{uktug-enquiries@tex.ac.uk}
\end{quote}

Cheques should be payable to the user group (TUG or UKTUG) and be
clearly marked as contributions to the \LaTeX3 fund.

Many thanks to all of you who have contributed in the past and thanks
in advance for your generosity in the future.

 
\section{Background}

With \TeX{}, Knuth designed a formatting system that is able to
produce a large range of documents typeset to extremely high quality
standards. For various reasons (\eg quality, portability, stability
and availability) \TeX{} spread very rapidly and can nowadays be best
described as a world-wide de facto standard for high quality
typesetting. Its use is particularly common in specialized areas, such
as technical documents of various kinds, and for multi-lingual
requirements.
 
The \TeX{} system is fully programmable. This allows the development
of high-level user interfaces whose input is processed by \TeX{}'s
interpreter to produce low-level typesetting instructions; these are
input to \TeX{}'s typesetting engine which outputs the format of each
page in a device-independent page-description language.  The \LaTeX{}
system is such an interface; it was designed to support the needs of
long documents such as textbooks and manuals. It separates content and
form as much as possible by providing the user with a generic (\ie
logical rather than visual) mark-up interface; this is combined with
style sheets which specify the formatting.
 
Recent years have shown that the concepts and approach of \LaTeX{} are
now widely accepted. Indeed, \LaTeX{} has become the standard method
of communicating and publishing documents in many academic
disciplines.  This has led to many publishers accepting \LaTeX{}
source for articles and books; and the American Mathematical Society
now provides a \LaTeX{} package making the features of \AmSTeX{}
available to all users of \LaTeX{}.  Its use has also spread into many
other commercial and industrial environments, where the technical
qualities of \TeX{} together with the concepts of \LaTeX{} are
considered a powerful combination of great importance to such areas as
corporate documentation and publishing.
  
With the spreading use of \SGML{}-compliant systems, \TeX{} again is a
common choice as the formatting engine: a widely used such system is
{\em The Publisher\/} from ArborText,
whilst a more
recent development is the object-oriented document editor Grif.
The latter 
is used for document processing in a wide range of
industrial applications; it has also been adopted by the Euromath
consortium as the basis of their mathematician's workbench, one of the
most advanced of the emerging project-oriented user environments.
Typeset output from \SGML{}-coded documents in these systems is obtained
by translation into \LaTeX{}, which will therefore also be a natural
choice for the output of \DSSSL-compliant systems.

Because a typical \SGML{} Document Type Definition (DTD) uses concepts
similar to those of \LaTeX{}, the formatting is often implemented by
simply mapping document elements to \LaTeX{} constructs rather than
directly to `raw \TeX'.
This enables the
sophisticated analytical techniques built into the \LaTeX{}
software to be exploited; and it avoids the need to program in \TeX{}.

\section{Motivation}

This increase in the range of applications of \LaTeX{} has highlighted
certain limitations of the current system, both for authors of
documents and for designers of styles.

In addition to the need to extend the variety of classes of document
which can be processed by \LaTeX{}, substantial enhancements are
necessary in, at least, the following areas:
 \begin{itemize}
 \item
   the command syntax (attributes, short references, etc);
 \item
   the layout specification interface (style design);
 \item
   the level of robustness (error recovery, omitted tags);
 \item
   the extendability (package interface);
 \item
   the layout specification of tabular material;
 \item 
   the specification and inclusion of graphical material;
 \item 
   the positioning of floating material, and other aspects of page
   layout;
 \item
   the use of documents in hypertext systems.
 \end{itemize}

 Further analysis of these deficiencies has shown that some of the
 problems are to be found in \LaTeX{}'s internal concepts and design.
 This project to produce a new version therefore involves thorough
 research into the challenges posed by new applications and by the use
 of \LaTeX{} as a formatter for \SGML{} documents.

 This will result in a major re-implementation of large parts of the
 system.  The recently released new standard \LaTeX{} already
 incorporates some of the results of such rethinking of the
 fundamentals, notably in the following areas:

\begin{itemize}
\item Font declaration and selection;
\item Font and glyph handling within mathematical formulas;
\item Handling multiple font glyph encodings within a document;
\item Allowing multiple input character encodings within a document; 
\item A uniform interface for graphics inclusion;
\item Support for coloured text;
\item Building and interfacing new classes and extension packages.
\end{itemize}


\section{Description}

The strengths of the present version of \LaTeX{} are
as follows:
 \begin{itemize}
 \item excellent standard of typesetting for text, technical 
formulas\\
and tabular material;
 \item  separation of generic mark-up from visual formatting;
 \item  ease of use for authors;
 \item  portability of documents over a wide range of platforms;
 \item  adaptability to many languages;
 \item  widespread and free availability;
 \item  reliable support and maintenance by the \LaTeX3 project team.
 \end{itemize}
 These will be preserved and in many cases greatly enhanced by the new
version which is being developed to fulfill the following requirements.
 \begin{itemize}
 \item
 It will provide a syntax that allows highly automated translation
 from popular \SGML{} DTDs into \LaTeX{} document classes (these 
 will be provided as standard with the new version).

 The syntax of the new \LaTeX{} user-interface will, for example,
 support the \SGML{} concepts of `entity', `attribute' and `short
 reference' in such a way that these can be directly linked to the
 corresponding  \SGML{} features.
 
 \item
 It will provide a straightforward style-designer interface to support
 both the specification of a wide variety of typographic requirements
 and the linking of entities in the generic mark-up of a document to
 the desired formatting.  These two parts of the design process will
 be clearly separated so that it is possible to specify different
 layouts for the same DTD.

 The language and syntax of this interface will be as natural as
 possible for a typographic designer.  As a result, this language
 could easily be interfaced to a visually-oriented, menu-driven
 specification system.
 
 \item
 It will provide an enhanced user-interface that allows expression of
 the typesetting requirements from a large range of subject areas. Some
 examples are listed here.
 
 \begin{itemize}
 \item The requirements of technical documentation (\eg offset layout,\\
   change bars, etc).
 \item The requirements of academic publishing in the humanities\\
   (critical text editions, etc).
 \item The requirements of structural formulas in chemistry.
 \item Advanced use of the mathematical-typesetting features of \TeX{}.
 \item The integration of graphical features, such as shading, within text.
 \end{itemize}

 Special care will be taken to ensure that this interface is
 extensible: this will be achieved by use of modular designs.
 
 
  \item
  It will provide a more robust author-interface. For example,
  artificial restrictions on the nesting of commands will be removed.
  Error handling will be improved by adding
  a more effective, interactive help system.
 
  \item
  It will provide access to arbitrary fonts from any family (such as
  the \PS{} and TrueType fonts) including a wide range of fonts for
  multi-lingual documents and the specialist glyphs required by
  documents in various technical and academic areas.

 \item
  The new interfaces will be carefully documented in detail and the
  system will provide extensive catalogues of examples, carefully
  designed to make the learning time for new users (both designers and
  authors) as short as possible.
 
 \item
 The code itself will be thoroughly documented and it will be designed on
 modular principles.  Thus the system will be
 easy to maintain and to enhance.
\end{itemize}
 
The resulting new \LaTeX{} will, like the present version,
be usable with any standard
\TeX{} system and so will be freely available on a wide range
of platforms. 


\section{\LaTeX{} on the internet}

\LaTeX{} has its own home page on the World Wide Web, with the URL:
\begin{verbatim}
   http://www.tex.ac.uk/CTAN/latex/
\end{verbatim}
This page describes \LaTeX{} and the \LaTeX3 project, and contains
pointers to other \LaTeX{} resources, such as the user guides, the
\TeX{} Frequently Asked Questions, and the \LaTeX{} bugs database.

The electronic home of anything \TeX-related is the Comprehensive
\TeX{} Archive Network (CTAN).  This is a network of cooperating ftp
sites, with over a gigabyte of \TeX{} material:
\begin{verbatim}
   ftp://ftp.tex.ac.uk/tex-archive/
   ftp://ftp.shsu.edu/tex-archive/
   ftp://ftp.dante.de/tex-archive/
\end{verbatim}
For more information, see the \LaTeX{} home page.
A complete description of the new standard \LaTeX{} can be found in:

\begin{citations}
\item[\LaTeX: A Document Preparation System]
   Leslie Lamport, \AW, 2nd ed, 1994.
\item[The \LaTeX{} Companion]
   Goossens, Mittelbach and Samarin, \AW, 1994.
\end{citations}
This \LaTeX{} distribution comes with documentation on the new features of:

\begin{citations}
\item[\LaTeXe{} for authors] 
   describes the new features of \LaTeX{} documents,
   in the file \verb|usrguide.tex|;
\item[\LaTeXe{} for class and package writers]
   describes how to produce \LaTeX{} classes and packages,
   in the file \verb|clsguide.tex|;
\item[\LaTeXe{} font selection]
   describes the new features of \LaTeX{} fonts for
   class and package writers,
   in the file \verb|fntguide.tex|.
\end{citations}

For more information on \TeX{} and \LaTeX, get in touch with your local
\TeX{} Users Group, or the international \TeX{} Users Group;
information about these groups can also be found in the CTAN.

\end{document}