%% 
%% This is file `flafter.sty', generated 
%% on <1995/6/21> with the docstrip utility (2.2i).
%% 
%% The original source files were:
%% 
%% ltoutput.dtx  (with options: `flafter,trace')
%% 
%% This is a generated file. 
%% 
%% Copyright 1993-1995 the LaTeX3 project and any individual authors 
%% listed elsewhere in this file. All rights reserved. 
%% 
%% For further copyright information see the file legal.txt, and any 
%% other copyright notices in this file. 
%% 
%% This file is part of the LaTeX2e system. 
%% ---------------------------------------- 
%% This system is distributed in the hope that it will be useful, 
%% but WITHOUT ANY WARRANTY; without even the implied warranty of 
%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 
%% 
%% For error reports concerning UNCHANGED versions of this file no more 
%% than one year old, see bugs.txt. 
%% 
%% Please do not request updates from us directly. Primary 
%% distribution is through the CTAN archives. 
%% 
%% 
%% IMPORTANT COPYRIGHT NOTICE: 
%% 
%% You are NOT ALLOWED to distribute this file alone. 
%% 
%% You are allowed to distribute this file under the condition that it is 
%% distributed together with all the files listed in manifest.txt. 
%% 
%% If you receive only some of these files from someone, complain! 
%% 
%% Permission is granted to copy this file to another file with a clearly 
%% different name and to customize the declarations in that copy to serve 
%% the needs of your installation, provided that you comply with 
%% the conditions in the file legal.txt. 
%% 
%% However, NO PERMISSION is granted to generate or to distribute a 
%% modified version of this file under its original name. 
%% 
%% You are NOT ALLOWED to change this file. 
%% 
%% 
%% MODIFICATION ADVICE: 
%% 
%% If you want to customize this file, it is best to make a copy of the 
%% source file(s) from which it was produced. Use a different name for 
%% your copy(ies) and modify the copy(ies); this will ensure that your 
%% modifications do not get overwritten when you install a new release of 
%% the standard system. You should also ensure that your modified source 
%% file does not generate any modified file with the same name as a 
%% standard file. You can then easily distribute your modifications by 
%% distributing the modified and renamed copy of the source file, taking 
%% care to observe the conditions in legal.txt; this will ensure that 
%% other users can safely use your modifications. 
%% 
%% You will also need to produce your own, suitably named, .ins file to 
%% control the generation of files from your source file; this file 
%% should contain your own preambles for the files it generates, not 
%% those in the standard .ins files. 
%% 
%% The names of the source files used are shown above. 
%% 
%% 
%%% File: ltoutput
\def \@addtocurcol {%
  \tr@ce{***Start addtocurcol}%
   \@insertfalse
   \@setfloattypecounts
   \ifnum \@fpstype=8
     \tr@ce{fpstype !p only (addtocurcol): \the \@fpstype = 8?}%
   \else
     \ifnum \@fpstype=24
       \tr@ce{fpstype p only (addtocurcol): \the \@fpstype = 24?}%
     \else
       \@flsettextmin
       \tr@ce{textfloatsheight (before) = \the \@textfloatsheight}%
       \advance \@textmin \@textfloatsheight
       \@reqcolroom \@pageht
       \tr@ce{textmin + textfloatsheight: \the \@textmin}%
       \tr@ce{page-so-far: \the \@reqcolroom}%
       \ifdim \@textmin>\@reqcolroom
         \@reqcolroom \@textmin
         \tr@ce{ORD? textmin being used}%
       \fi
       \advance \@reqcolroom \ht\@currbox
       \tr@ce{float size = \the \ht \@currbox (addtocurcol)}%
       \tr@ce{colroom = \the \@colroom (addtocurcol)}%
       \tr@ce{reqcolroom = \the \@reqcolroom (addtocurcol)}%
       \ifdim \@colroom>\@reqcolroom
         \@flsetnum \@colnum
         \ifnum \@colnum>\z@
           \@bitor\@currtype\@deferlist
           \tr@ce{deferlist: \@deferlist: (addtocurcol-before)}%
           \if@test
             \tr@ce{type already on list: defer (addtocurcol)}%
           \else
             \@bitor\@currtype\@botlist
           \tr@ce{botlist: \@botlist: (addtocurcol-before)}%
             \if@test
               \tr@ce{type already on list: bot---sent to addtobot}%
               \@addtobot
             \else
               \tr@ce{fpstype \ifodd \@tempcnta OK \else not \fi
                      here: \the \@fpstype}%
               \ifodd \count\@currbox
                 \advance \@reqcolroom \intextsep
                 \ifdim \@colroom>\@reqcolroom
                   \global \advance \@colnum \m@ne
                   \global \advance \@textfloatsheight \ht\@currbox
                   \global \advance \@textfloatsheight 2\intextsep
                   \@cons \@midlist \@currbox
                   \tr@ce{***Success: here}%
                   \tr@ce{textfloatsheight (after-here) =
                        \the \@textfloatsheight}%
                   \tr@ce{colnum (after-here) = \the \@colnum}%
                   \if@nobreak
                   \else
                     \addpenalty \interlinepenalty
                   \fi
                   \vskip \intextsep
                   \box\@currbox
                   \penalty\interlinepenalty
                   \vskip\intextsep
                   \ifnum\outputpenalty <-\@Mii \vskip -\parskip\fi
                   \outputpenalty \z@
                   \@inserttrue
                 \else
                   \tr@ce{Fail---no room at 2nd test of colroom
                                 (addtocorcol \string\intextsep)}%
                 \fi
               \fi
               \if@insert
               \else
                 \tr@ce{not here: sent to addtobot}%
                 \@addtobot
               \fi
             \fi
           \fi
         \else
           \tr@ce{Fail: colnum = \the \@colnum:
                        fpstype \the \@fpstype=ORD?}%
           \ifnum \@fpstype<\sixt@@n
             \tr@ce{ERROR: BANG float not successful (addtocurcol)}%
           \fi
         \fi
       \else
         \tr@ce{Fail---no room: fl box ht: \the \ht \@currbox
                                                     (addtocurcol)}%
       \fi
     \fi
   \fi
   \if@insert
   \else
     \@resethfps
     \tr@ce{put on deferlist (addtocurcol)}%
     \@cons\@deferlist\@currbox
     \tr@ce{deferlist: \@deferlist: (addtocurcol-after)}%
   \fi
}
\def \@tracemessage #1{\typeout{LaTeX2e: #1}}
\def \tracefloats{\let \tr@ce \@tracemessage}
\def \notrace {\let \tr@ce \@gobble}
\notrace
\def \@traceval #1{\tr@ce{\string #1 = \the #1}}
\def \tracefloatvals{%
  \@dblfloatplacement
  \@floatplacement
  \@traceval\@colnum
  \@traceval\@colroom
  \@traceval\@topnum
  \@traceval\@toproom
  \@traceval\@botnum
  \@traceval\@botroom
  \@traceval\@fpmin
  \tr@ce{\string\textfraction = \textfraction}%
  \@traceval\@dbltopnum
  \@traceval\@dbltoproom
}
\providecommand\tr@ce[1]{}
\endinput
%% 
%% End of file `flafter.sty'.